air compressor ga used for sale

Pressure vessels, compressed air tanks OKS, Otto Klein Stahlblechverarbeitung GmbH 479109 year 2000 operating pressure: 16 bar maximum capacity: 10 litres Dimensions: 470 x 290 x 240 mm

Auction-ID: A1-43992-185

Auction-ID: A1-43992-165

Auction-ID: A1-43992-153

Air Heat Exchanger, Control Cabinet Fan RITTAL Techline SK 3129 ( SK3129 ) 2 x 82 W 230 V used, tested ! Dimensions: 780 x 300 x 140 mm

Hot Air Axial Fan, Axial Tubular Fan ASTO, JULIUS SÖHNLE AH03 450 0.77 m3/s up to 600°C (motor thermal, insulated with cooling air from outside) speed: 1375 rpm motor : 0.25 kW 380 / 660 V Inner diameter: Ø 450 mm New ! Dimensions: 500 x 600 x 520 mm

Auction-ID: A1-45170-73

Auction-ID: A1-41682-40

For sports aircraft including remote control Auction-ID: A1-41682-38

Auction-ID: A1-46310-79

Used pneumatic hand-edge-contour milling machine with associated pneumatic maintenance unit (filter/regulator combination) on mounting plate. Manufacturer according to documents: MFK / Gerald Klug Industrial representation Type: 310-DHKKF Machine No.: 411 Equipment / Scope of delivery:     •    Pneumatic hand-edge-contour milling machine     •    Collet / tool holder mounted     •    Pneumatic maintenance unit (filter + pressure regulator with pressure gauge)     •    Compressed air hoses     •    Hook wrench     •    Operating instructions (original)     •    Operating pressure: 6 bar    ...

Auction-ID: A1-46310-78

Air Reducing Valve PRVA PETOLETKA RA1 251 M NW 25 229-25400 New ! Dimensions: 270 x 220 x 155 mm

Compressed air distributor PAGUS 64 Quick couplings Dimensions: 800 x 280 x 230 mm

Air motor, with bracket and collet Ø 4mm DESOUTTER DM55 1231842 630 rpm with bracket and collet Ø 4mm used ! Dimensions: 240 x 115 x 65 mm

Hydraulic Air Pressure Intensifier ENERPAC AHB 46 03307C Max 368 BAR Dimensions: 550 x 280 x 230 mm

Heating element, air heater - without housing VOLTA ERR 7,000 W 12 Heating rods 380 V Dimensions: 560 x 250 x 145 mm

Air Heat Exchanger, Control Cabinet Fan EBM R2E180-AT38-10 2 x 85 W 220 V Dimensions: 1820 x 480 x 120 mm

Air Heat Exchanger, Control Cabinet Fan RITTAL Techline SK3129 2 x 82 W 230 V Small piece of fan cover broken off ! used, tested ! Dimensions: 780 x 300 x 120 mm

Hot Air Blower LEISTER Hotwind S ( HotwindS ) Type 9C1.2.2 102.586 2.3 kW 230 V AC max. 400 °C used, tested ! Dimensions: 430 x 220 x 150 mm

Pneumatic nailer, strip magazine nailer PASLODE GN 161 ( GN161 ) for nails up to 160 mm Pmax 8 bar suitable nails W125 ! used ! Dimensions: 540 x 520 x 140 mm

Spring balancer with compressed air hose DESOUTTER 3HU 6.3 bar load capacity: 0.5 - 1.4 kg extension: 1,300 mm used, tested ! Dimensions: 200 x 200 x 150 mm

Height 1750 mm Width 1260 mm Length 2380 mm Power supply: 400V 50Hz 3N Description The machine is adapted to transport shredded dry industrial materials.

Compressed air tank 15 m³, operating pressure 4 bar

Compressed air tank 5.3 m³, operating pressure 7 bar

Axial Dry Cooler, Güntner GFH090.2A/2x3-M(S) Manufacturer: Güntner. Medium: Water Glycol 70/30% Medium temperature: Inlet 90º C. Outlet 70º C. Cooling Capacity: 800kW Air temperature: 35º C. Fans: 6 pieces, 1.5kW, 400V, 50Hz, 3 conductors Connection: Inlet 1x DN80, Outlet 1x DN80 Dimensions: LxWxH = 6,200x22921x1460mm Weight: 1358kg Sound pressure level: 53 dB(A) 10m distance, Year of Make: 2016 Condition: Good, leakage and fans tested Jenbacher, Dry cooler, Dry air cooler, Emergency cooler, drycooler, Glycol cooling water

Axial Dry Cooler, Güntner GFH090.2A/2x3-M(S) Manufacturer: Güntner. Medium: Water Glycol 70/30% Medium temperature: Inlet 90º C. Outlet 70º C. Cooling Capacity: 800kW Air temperature: 35º C. Fans: 6 pieces, 1.5kW, 400V, 50Hz, 3 conductors Connection: Inlet 1x DN80, Outlet 1x DN80 Dimensions: LxWxH = 6,200x22921x1460mm Weight: 1358kg Sound pressure level: 53 dB(A) 10m distance, Year of Make: 2016 Condition: Good, leakage and fans tested Jenbacher, Dry cooler, Dry air cooler, Emergency cooler, drycooler, Glycol cooling water

Air classifier - Integra HWS-1000 KL (unused) This item is as new, as it was never in use. For sale: - Air classifier POWER HWS-1000 KL - Hook lift - system DIN 30722 - Conveyor belt special construction, foldable with stock winch - AA: 2750 mm, GB: 650 mm, steep conveyor belt with 30 mm V-profile incl. magnetic drum and VA chute - Power generator 100 KVA, Stage 3, 280 liter tank Condition: NEW The wind sifter was not in operation. Only the power generator has a running time of 2.566 hours The 2020 Integra HWS-1000 KL is an industrial air classifier machine primarily used for sorting and separating materials based on air flow dynamics. It is often employed in recycling processes or material handling where specific separation is required. The machine features a hook lift system compliant with DIN 30722 standards and includes a specially designed conveyor belt with a steep angle ...

modular compressed air maintenance unit PARKER Maintenance unit with filter, pressure regulator, stopcock Filter with pressure regulator P3KEA14ESABNGP Stopcock P3KVA14LN Oiler can be filled under pressure P3KLA14LSMN Inlet pressure up to 17 bar Control pressure 8 bar Connection 1/2" Wall bracket

TO WHOM IT MAY CONCERN ; WE VE 1 PC REBUILT AIR STARTER INGERSOLL RAND ST 499 IC 03L AT STOCK. ( EX STOCK ) PLS FIND DETAILS ON BELOW TYPE ST 499IC03L SERIAL NO. SP110221056 MAX INLET PRESSURE 90 PSIG MADE IN USA IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 abc.aliagamarine.com TURKEY

modular compressed air maintenance unit PARKER Maintenance unit with filter, pressure regulator, stopcock Filter with pressure regulator P3KEA14ESABNGP Stopcock P3KVA14LN Inlet pressure up to 17 bar Control pressure 8 bar Connection 1/2" Wall bracket

available is a complete Plant with Equipment to produce Airspring! 3 Roll Calender with line and 84" Twin Mill Bias Cutter Several Building machine several hydraulic Curing presses testing machine 3 x assembly lines Winder ...

Guiding machine / measuring machine Year of construction 2025 7.5 kW Filter area 32m^2 Intake manifold: 300 Dimension: LxWxH: 3,650x1,540x2,570

YOC 2001, working width 220 cm, 4 weft colors Stäubli electron. dobby 2871 – 16 shafts installed, Sumo motor, electron. take-up and warp let-off, max warp beam flange dia. 1,000 mm, off-loom take-up

02 sets Picanol Air-Jet Weaving Looms, type OmniPlus Summum – 250-4R YOC 2015, working width 250 cm, 4 weft colors Stäubli electron. dobby 3220 / C4Can – 16 shafts installed, Sumo motor, electron. take-up and warp let-off, double whip rollers, max warp beam flange dia. 1,000 mm, off-loom take-up

2. Other and Auxiliary Systems - SNA SNA-08. Air Technology System, 2 units Type Wolf KG 250, functional, Built: 1991 Manufacturer: Wolf Anlagen Technik GmbH Technical Data: 20250 m³/h; 10 kW; 1500 rpm; 1050 Pa Motors: 71M01 LOHER DNGW 160LB 04A; 5 kW; 380V; 1500 rpm; 50Hz, Built: 1991 71M02 LOHER DNGW 160VB 040; 5 kW; 380V; 1500 rpm; 50Hz, Built: 1991 Find more here - / Contact us at -

Diameter of process lines/regeneration drain lines/compressed air lines: 50mm/50mm/8mm, max. inlet temperature: 34°C, max. hardness: 10/20°Fr, min./max. operating pressure: 2bar/8bar, min. degree of filtration: 5µm, max. glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, max. tank volume: 30dm³-200dm³, max. Glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, tank volume: 30dm³-200dm³, max. compressed air consumption: 300l-500l/h, machine dimensions X/Y/Z: approx. 800mm/650mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

Manufacturer: Hackemack, Type: 2540, Year: 1995, Working widht mm: 1300, Working height in mm: 950, Conveyor lenght mm: 11000, Through running hight mm: 90, Thermal output: 2 Register, Feedin speed m/min: 5-20, Belt conveyor: yes, Flat spray nozzle: yes, Round nozzle: Flachdüse, Damper register - items: 2, 1st Damper register kW: 65, 2nd Damper register kW: ca.50, Year :1995

Manufacturer: Venyeskob, Type: Mikrowellen Trockner, Year: 2007, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 150, Length mm: ca 6.774, Channel length in mm: 6000, Revisionsklappen: yes, Kanaltemperatur Grad: ca 30°C, Umluftleistung m³/h: 3.000, Ex geschützt: no, Working widht max mm: 1300, Working height in mm: 95, Conveyor lenght mm: 6800, Through running hight mm: 100, Belt conveyor: yes, Electrical power consumption kW: 13, Year :2007

A Wolf air conditioning and ventilation system, consisting of a supply air unit, an extract air unit and a heater, is available. 1) Wolf WK-101 supply air unit, nominal volume flow: 8500m³/h or 2.36m³/s, total/exact delivery pressure: 675Pa/250Pa, fan efficiency: 75.3%, fan speed: 2131rpm, fan power: 2.4kW, differential pressure: 1861Pa, motor power: 3kW, motor speed: 1420rpm. 2) Wolf WK-101 exhaust air unit, nominal volume flow: 8500m³/h or 2.36m³/s, number of filters: 4, filter class: F5, filter type: Biost. Pocket filter TK F5 PVC, initial pressure difference: 69Pa, final pressure difference: 200Pa. 3) Wolf WK-101 heater, nominal volume flow: 8500m³/h or 2.36m³/s, nominal heat output: 51.4kW, air inlet and air outlet temperature: -14°C/4°C, heating medium: water-glycol, flow temperature: 12.8°C, return temperature: 0.7°C, medium flow rate: 4240l/h, glycol content: 30%, max.  ...

Manufacturer: Purete, Type: PRT-I3613, Year: 2020 neu, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 100, Channel length in mm: 6.000, Revisionsklappen: yes, Min.-max. workpiece height in mm: 2 - 80, Working widht max mm: 1.320, Conveyor lenght mm: 6.000, Feedin speed m/min: 0 - 20, Rod transportation: yes - 38,7 mm, 1st Damper register kW: 36, Electrical power consumption kW: 44, FREE TEXT: Heizung über Elektro - auf Anfrage über Wasser und Öl möglich, Year :NEU

Manufacturer: Rippert Düsentrockner, Type: DTK 041, Year: 2004, Work piece width min-max mm: 800, Channel length in mm: 7000, Revisionsklappen: yes, Gehäuse Wärmeisoliert mm: yes, Kanaltemperatur Grad: 50, Umluftleistung m³/h: 4600, Ex geschützt: no, Temperature regulation: yes, Min.-max. workpiece height in mm: 60, Conveyor lenght mm: 8000, Feedin speed m/min: 1-6, Belt conveyor: yes, Air speed in jets: 25 m/s, Flat spray nozzle: yes, Damper register - items: 1, Year :2004

Manufacturer: Venyeskob, Type: Düsentrockner, Year: 11.97, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 150, Length mm: ca 13.000, Revisionsklappen: yes, Gehäuse Wärmeisoliert mm: yes, Kanaltemperatur Grad: ca.60, Abluftventilator kW: ca.5, Ex geschützt: yes, Gesamthöhe mm : 2800, Temperature regulation: yes, Min.-max. workpiece height in mm: 3-80, Feedin speed m/min: 6-30, Belt conveyor: yes, Max. air temperature: 60, Heated by: Warmwasser, Damper register - items: 1, 1st Damper register kW: ca.80, Year :11.97

Manufacturer: Rippert, Type: DTK 7000, Year: 1995, Work piece width min-max mm: 1300, Channel length in mm: 15.000, Kanaltemperatur Grad: 56 / 70, Umluftleistung m³/h: 2 x 8.650, Abluftleistung m³/h: 2 x 780, Raumluft m³/h: 2 x 780, Mischluftventilator kW: 2 x 7,5, Thermal output: 2 x 36, Belt conveyor: yes, Air speed in jets: 25, Max. air temperature: 56 / 70, Heated by: Wasser, Damper register - items: 2, Solvent quantity g/min: 2 x 12.390, Year :1995

Volume: 250l, max. operating pressure: 11bar, outer diameter: 450mm, stand height: 1800mm, medium temperature min./max.: -10°C/120°C. Documentation available. On-site inspection is possible. The machine is unused and as good as new.

Manufacturer: Venyeskop, Type: DTK, Year: 1989, Work piece width min-max mm: 300, Min.-max. workpiece length in mm: 300-4500, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 300, Conveyor lenght mm: 16000, Through running hight mm: 80, Feedin speed m/min: regelbar, Belt conveyor: yes, FREE TEXT: inkl. Transport Einlaufband 4000 mm, Year :1989

Manufacturer: Venyeskob, Type: Düsentrockner, Year: 1989, Working widht max mm: 1400, Conveyor lenght mm: 7500, Through running hight mm: 100, Thermal output: 41000 Joule, Feedin speed m/min: 5-25, Belt conveyor: yes, Round nozzle: yes, 1st Damper register kW: 48, Year :1989

The drying / conveying system for plastics - Koch CKT300 Year of manufacture 2007 Description: Plastic drying plant with 2 independent silos Warm air generator with a doubled molecular sieve Sieves work alternately, during the drying process, one sieve works and the second sieve regenerates Silos are hermetically insulated, each silo 250 litres, with its own control system Silos can work separately and independently with different materials and temperatures Silo has heating function and temperature maintenance function Silos have valves for connecting an automatic or manual debris chute It is possible to connect 2 more silos It is possible to buy automatic suction conveyors All offered peripherals are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live tech ...

The drying/conveying system for plastics - Motan Metrolux A80 Year of Make: 2017 Description: Plastic drying plant with 2 independent silos Warm air generator with a doubled molecular sieve Sieves work alternately, during the drying process, one sieve works and the second sieve regenerates Power: 13.7 kW Heating capacity: 10.5 kW Capacity: 80 m³/h Touch control panel Silos are hermetically insulated, each silo 200 litres, with its own control system Silos can work separately and independently with different materials and temperatures Heating capacity: 1.5 kW Silo has heating function and temperature maintenance function Silos have valves for connecting an automatic or manual debris chute It is possible to buy automatic suction conveyors with a vacuum pump, which are used to fill the silos with material. Suction conveyors with their own filter for material dedusting  ...