air compressor ga used for sale

Proofing trolley with puller for WP Matador Stainless steel proofing trolley mobile with 10 ALU pullers Pull-off apparatus with upper trigger good cotton cloths for WP Matador oven Used equipment

Screw compressor Atlas Copco GA90VSD+ Inverter integrated 90 kW 13 bar 17.80 m3/min Year of Make: 2019 Hours: 34,177

On offer is an industrial fermentation control system of the Kemper brand (fermentation interrupter / proofing retarder) from a former industrial bakery. The system was used for controlled dough guidance (fermentation delay, fermentation interruption and final cooking) and is ideal for bakeries, production companies or dealers for bakery technology. Manufacturer: Kemper Type: Fermentation interrupter / fermentation delay system Design: Double chamber with control unit and viewing windows Condition: used, removed from ongoing production. The system is complete, a precise technical inspection has not been carried out, so the device is offered as used and untested. The device is currently at our customer's site in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of th ...

Used root vegetable washing and peeling line with a capacity of about 5 T/h The line includes: DRUM WASHER WITH ELECTRIC MOTOR. - TYPE LTJ-840 DL.3600,WIDTH 1100,H.1950, Manufacturer: GATINEAU FRANCE, Year: 1980 Flat conveyor SCREW POWER PEELER WITH MOTOR. ELECTR. - TYPE YAI1056 BE A6/1 DL.5200, Manufacturer: GATINEAU FRANCE Year: 1980 STEAM PEELER WITH MOTOR. ELECTR. - TYPE PVR-900L DL.3000,WIDTH 2000,HEIGHT 5750, Manufacturer: GATINEAN FRANCE Year: 1980 OUTPUT SCREW WITH PEELER WITH ELECTRIC MOTOR - TYPE YAI 1056 BEA4/1 DL.7500, Manufacturer: GATINEAU FRANCE Year: 1980 Brush wipes 2pcs Inspection Conveyor

Garos vacuum tumbler with double jacket for cooling on weighing cells, type: MDF1600K, serial number: 26308026, year of construction: 2003, 3 x 380 V, 50 Hz, 5.2 kW, volume: 1600 liter, capacity: maximum 1100 kg, speed: 1.8 - 8.0 rates per minute, infeed height: 1650 mm, outfeed height: 880 mm, weight: 1650 kg, total dimensions: 3070 mm x 1900 mm x 2250 mm.

AB Garos tiltable cooled vacuum tumbler, type: MDF 5600 K, machine number: 29106012, year of construction: 2001, 400 V, 50 Hz, 26 A, 11.5 kW, weight: 3570 kg, maximum capacity: 3500 kg / liter, Busch vacuum pump, total dimensions: 5600 mm x 2450 mm x 2950 mm.

AB Garos injector/tenderiser, type: GSI 620 CWP, serial number: 11060610.30053, year of construction: 2014, 400 V, 3 Ph, 50 Hz, 25 A, 12 kW, machine weight: 1680 kg, s/s walking beam, walking beam width: 620 mm, clearance: 620 mm x 280 mm, 144 needles, diameter needles: 5 mm, total dimensions: 3100 mm x 1250 mm x 2250 mm. Including s/s mobile filter tub, dimensions filter tub: 1800 mm x 860 mm x 1220 mm.

Overview  The GAI filler was manufactured in 2022 by the Italian company GAI. This machine is used to fill sparkling wine into cylindrical bottles from 0,2L until 1,5L. It is equipped with a rinser (air or water) 16 nozzles, 24 electropneumatic filling valves and 3 capping turrets (3 capping heads on each turret). Each capping turret has its own cap feeding and alimentation system. Dedusting unit for the corks is installed. Integrated overpressure roof with prefilters and absolute filters. This machine is sold with an automatic CIP and 2 pallets of microfiltration Win&tech. The machine is still in production and can be visited. The condition of the machine is like new, as it has only 200 working hours. Technical details  Working direction: left to right Capacity: 0,187ml - 4500bph 4°C & 15°C 0,375ml - 4500bph 4°C & 15°C 0,750ml - 4000bph 4°C &  2900bph 15°C 1500ml - 2000bph 4°C ...

turning diameter:120 mm turning length:100 mm control:Fanuc Spindle 1 power:7,5 kW Spindle 1 RPM:4500 1/min Spindle 2 power:7,5 kW Spindle 2 RPM:4500 1/min Distance between spindle noses:600 mm Turret No.1 stations / rotary tools:15/15 Power rotary tools turret 1:2,7 kW RPM of rotary tools turret 1:4000 1/min Turret No.2 stations / rotary tools:15/15 Power rotary tools turret 2:2,7 kW RPM of rotary tools turret 2:4000 1/min Travel x/z turret 1:250 / 300 mm Travel x/z turret 2:250 / 920 mm Bar capacity spindle 1:51 mm Bar capacity spindle 2:51 mm power chuck:165 mm Spindle bore sp. 1:62 mm Spindle bore sp. 2:62 mm dimensions of the machine ca.:3700 x 2300 x 3000 mm weight of the machine ca.:5600 kg Used CNC-2-spindle CNC turning and milling center with gantry loader - 2x 15 station turret -automatic gantry loader with turnaround station. 14 station-magazin right side Max. Parts size Ø 12 ...

grinding diameter:200 mm grinding length:320 mm total power requirement:3,5 kW weight of the machine ca.:9 t space required L x W X H:5,28 x 4,5 x 2,4 m max. wheel dia.:200 mm Spindle drives Arena Siemens For Worm grinding we have not module, but pitch. Pitch is freely programmable from 0.001 to big value i.e. 500mm

pressure:150 t throat:450 mm stroke:115 fix mm no. of strokes:45 /min distance table/ram, max. stroke up, adjustment up:400 mm table surface area:2250 x 1090 mm table height over floor:900 mm passage to the back:1900 mm ram surface:1900 x 900 mm ram adjustment:100 mm power requirement:16,0 kW weight:19,5 t Dimensions (WxDxH):3,0 x 2,3 x 3,9 m

Gaspardo 6m seed drill with Howard-Nordsten seedbed combination, Technical specifications:, - Working width: 6m, - approx. 120ha used, - Sowing technology: Disc coulter with pressure rollers for precise sowing, - Carrier: Howard-Nordsten seedbed combination

Gassner closure loading system consisting of 3 basements (storage containers), with automatic cap loading for crown caps or aluminum roll caps on two cappers. The basements are filled using cardboard boxes., Additional title: crown caps, aluminum screw caps, Crown caps: 24000 pc/h, Aluminium screw cap: 24000 pc/h, Power: 1,7 kW, Voltage: 3 x 380 V, Length: 1,3 m, Width: 0,6 m, Height: 1,1 m, Weight: 70 kg, Material: stainless steel, Base construction: Rectangular storage container with lid, base made of square tube, Features: level indicator , Periphery: 3 magnetic transport-tapes (approx. 3 m / 14 m / 2 m)

Overview  The filler + capper block was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to process explosive products. The machine can be purchased with warranty.  Technical data  Fully automatic rotary filler Filling system: mass flow meter system, type: Endress+Hauser LPG MASS Number of filling stations: 16 filling stations Max. container dimensions: Height: 50-300 mm, Ø: 20-100 mm Pressurized feed tank for constant flow through flow meter  Below level filling to avoid foam formation during filling  Adjustable bottle neck centering  Electr. level measurement  CIP capable  Designed for riser pipe processing Fully automatic round capper Number of capping heads: 5 With torque adjustment via slip clutches With fully automatic cap sorting an ...

Overview  This vacuum filler was built in 1998 by Italian manufacturer GAI. In 2024 the machine was fully refurbished and is available immediately.   Technical Details    Effective Capacity: approx. 4,500-5,000 bottles/hour  Machine equipped for the following bottle formats: Bordeaux 75cl (diameter 78mm) - Burgundy 75 - 37.5cl - Magnums  Rinser with 20 clamps, inspected  Filler with 20 taps and vacuum system (new turbine) - taps inspected, new gaskets. New seating springs.  AROL Saturno Capper with 4 heads and vacuum - semi-new jaws in perfect condition - new vacuum pump and circuit  New wine inlet solenoid valve  Plug for feed pump  Machine newly refurbished (solenoid valve, jaws, vacuum turbine, gaskets, vacuum pump)  Electrical supply: 400 Volts / 50 Hz, 3 phases  Dimensions:  Long 380cm x Wide 140cm x High 250cm  Weight: 3500 kg   

Size: 265 mm Impression: 2 Mio. Equipments: Speed: 11.000 T/h Cylinder circumference: 254mm Web Width: 265mm Hotfoil Stamping Speed: 8,000 cycles/h Max print size width: 265 mm Min print size width: 130 mm Format length graduation: 0,01 mm Machine Voltage: 400V Voltage Peripherals: 230V Net Frequency: 50hz Feeding Unit Web Cleaning Corona Pretreatment Trimming and Suction Paper: 80 bis 180 g/qm2 Carton: up to 300g/qm2 at max. 0.3mm Adhesive Bonds: commercially available UV Offset Printing Units: 4 Coating Units: 1 Rotary Die Cutter Units: 1 Rotary Hotfoil Embossing Unit Web Inspection Web Inspection type: Powerscope 4000 manual Drying Model: Uviterno Coldstar Water cooled IR or UV: UV Trimming Knives: 4 Mesh Pulling Monitoring IR Dryer Max. Web Diameter: 800mm Remote Maintenance Plate Tool Maintenance Tools

Screw Compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6Fabr. No. 6240330200 built in 2003Volume flow rate 4.6 m3/min. Pressure capacity 10 barMotor power main motor 30 kWNe-connection 400 Volt, 50 HzConnection thread 1 1/2 inch- 36004 Switch-on hours read- 19256 load hours read- SoundproofedSpace requirement L x W x H 1850 x 1050 x 1760 mmWeight 910 kggood condition; used

Screw compressor KAESER type BS 50Fabr. No. 402852 built in 1990Volume flow 5 m³/min. Pressure capacity 7.5 barEngine power main motor 30 kWNet connection 400 volts, 50 HzConnection thread 1 1/2 inches- 1107.90Operating hours read- 749.00 load hours read- SoundproofSpace requirement L x W x H 1600 x 1070 x 1350 mmWeight 900 kgvery good conditionWas a reserve compressor and has only a few operating hours; used

Air Compressor Screw compressor Manufacturer: Alup Article: SCK 76-08 / SO Volume flow: 9.37 m³/h Motor power: 55.0 KW Completely NEW with all accessories Slight transport damage to the sheet metal, see pictures. Condition : New

Reciprocating compressor KAESER type EPC 630-250Fabr. No. 1802334 year of construction 1992Volume flow at 6 bar 440 litres/min. Capacity max. 630 litres/min. Pressure capacity 10 barBoiler capacity 250 litersEngine power 3 kWNerg connection 400 Volt, 50 Hz (with 16 Amp. Plug)- 2 cylinders oil-lubricated- Pressure switch set to 10 bar- Runtime from 0 bar to 10 bar Shut-off pressure = 5 minSpace required L x W x H 750 x 700 x 1750 mmWeight approx. 150 kgGood condition; used

Type: Oil-free piston compressor Model: Kaeser AIRBOX CENTRE 550 with integrated dryer & air receiver Rated power: 3 kW Air flow: 255 l/min Max. pressure: 10 bar Working hours: 2811 h (2533 h under load) YoM: 2014 Pump: Replaced with new unit in 2021 Last service: Kaeser C-Service on 06.10.2022 Maintenance: Regularly serviced Features: Integrated dryer, receiver tank, IE3 motor, refrigeration dryer (dew point +5 °C), oil-free operation Dimensions (D x W x H): 1730 x 820 x 1640 mm Weight: 550 kg ⚠️ Service manual not available. Please view the test video linked with the lot. Auction-ID: A7-45988-14

Auction-ID: A3-43515-17034

Atlas Copco GA10 air compressor (1994) with Atlas Copco FD30 refrigerant dryer (2002). Auction-ID: A3-43511-17020

Amonyak compressor Stal-Astra,screw with ekonomisor,switch box Venig used,only cca.6.000 operating hours.150Kw cooling capacity.

Amonyak refrigeration plant,from a meat processing plant. The plant is made of 3stk. Compressor Sabroe, Compressor 1. SABROE Type: SMC104L-HP,276m3/h,1465rpm,R717,Y.O.M.1996. Electric motor SCHORCH Type: KN7225M-BB01F-Z,55kW. Compressor 2and3. SABROE Type: CMO28,190m3/h,1460rpm,R717,Y.M.1996. MOTOR SCHORCH Type: KN7200M-BB01F-Z,37kW. The plant is in a very good condition,see pictures. Several pictures and info on request.

Compressor Bitzer 6H-25.2Y-40P,Used for freezing or plus-cooling

Compressor make BITZER Type 4H-15.2Y, 73.7 m3/h conveying volume For more information call +43 0664/1838175 or by emailing info@frigocom.net

Make: Danfoss Type: SZ175S4RC Performer 3 pieces New Vacuum: - Pressure: 25bar - Temperature max: 63C - Temperature min.: -35C - Volume: 31 litres Overpressure: - Pressure: 31.9bar - Temperature max: 65C - Temperature min.: -35C - Volume: 2 litres

Verbundanlagen Bitzer with original capacitors Deep-cave / Normal kuhlung -3x compressor Bitzer HSK6461-60-40P -KaeltePower: 177 kW at -10oC/40oC R134a 292.8 kW at -10oC/40oC R407C -Volume: 3 x 165 m3/h -Pieces in stock: 2 pieces -With original capacitors -In very good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

A very well preserved VML 18 R screw compressor unit is offered. The screw compressor has the following performance data: Air volume 15.82 m³/min P2e 1.8 bar. The electric motor has a power consumption of 55 kW. If you have any questions, please do not hesitate to contact us.

A very well preserved VM 8 R screw compressor unit is offered. The electric motor has a power consumption of 30 kW. If you have any questions, please do not hesitate to contact us.

A new replacement level type VMX 110 RD is offered see pictures. If you have any questions, please do not hesitate to contact us.

compressor compressor Copeland Stream, model

A complete unit is offered.

On offer is a very well-preserved VM 8 R screw compressor unit. The electric motor has a power consumption of 30 kW. If you have any questions, please feel free to contact us.

\"Max. pressure: 7.5 bar 11 KW\" Auction-ID: A7-45983-19

Auction-ID: A7-45393-27

A new replacement stage type VMX 110 RD is offered, see pictures. If you have any questions, please feel free to contact us.

Attachment: Schneider air compressor Compressor: UNM STV 460-10-200 t no.: T800-140 Suction power: 460 l / min EFF. Quantity: 375 l / min Final compression pressure: 10 bar Rated motor power: 3 kW Voltage: 400 v Frequency: 50 Hz Year of construction: 2008 Condition: mint condition - very good

Stationary air compressor Lutos DI 70-4 Oil-free Efficiency 3100 rpm 90 kW Weight 410 kg Ask for an offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biała USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl info@inter-wiba.com.pl

Screw air compressor Atlas Copco GA 408 59.586 hours of operation Masch. No. ARP 230-128 Built in 1994 Weight 1.2 to L x W x h: 250 x 130 x 200 cm Fqe3oovyi 8 bar 30 kW 2925 / min 380 V 50 Hz This machine is been serviced annually by Atlas Copco. The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Pressure air compressor, make CompAir / Geveke, type: VMHD 500, for 735 rpm, 21.5 bar, built 1985.

Pressure air compressor, make CompAir / Geveke, type: VMD 750, for 735 rpm, 8.5 bar, built 1991.

TO WHOM IT MAY CONCERN; WE VE USED ATLAS COPCO SCREW AIR COMPRESSOR. GA 55 AT STOCK PLS FIND SPESIFICATIONS ON BELOW MAWP. 9,1 bar. - 131psi VOLTAGE 440V 60Hz P motor 55kW 75hp YOB 2010 IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US PS: WE VE ALSO USED AIR COMPRESSOR ATLAS COPCO MAS GA 37 AT OUR STOCK. Aliaga Marine Services info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

TO WHOM IT MAY CONCERN; WE VE USED ATLAS COPCO SCREW AIR COMPRESSOR. MAS GA 37. AT STOCK PLS FIND SPESIFICATIONS ON BELOW MAWP. 9.1 bar. - 131psi VOLTAGE 440V 60Hz P motor 37kW 50hp 2010 YOB MADE IN. BELGIUM IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US PS: WE VE ALSO USED AIR COMPRESSOR ATLAS COPCO GA 55 AT OUR STOCK. Aliaga Marine Services info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

Screw compressor system semi-thermal air conditioning compressor Compressor Chiller 2 x 30 Kw electric for air conditioning systems. 2x Screw compressor Manufacturer: RefComp Type: SRC-S-133 Ser.-No.: RE00093364 & RE00093366 400 V; 277/398 A; 50 Hz; IP54 rated power Leistg.: 30 kW Funding volume: 150 m3/h Pressure: 19-26.5 bar 3x Shell and tube condensers Manufacturer: WTK Type: CF270 CA2P Y.O.M.: 2009 272 kW (46.80 m3/h); 273 mm Tube Side: 10-11 bar; -10/+120 °C; 26.0 dm3; H2O Shell Side: 30-33 bar; -10/+120 °C; 85.9 dm3; gas with control box / control box with main switches, control & switching modules & pcd7. D232 terminal display. with piping and other various extensions, all mounted on a sturdy 4-edge dread tube frame. Total approx. 3450 x 1400 H 1900 mm Subject to changes and errors in the technical data, dates and prices as well as intermediate s ...

double piston compressor system semi-hermetically air-conditioning compressor Compressor Chiller 2 x 18.5 Kw with frequency inverters 2x Semi-hermetic piston compressor Manufacturer: Bock Type: HGX5/830-4 N°: AM18158A014 & AM37155A014 380/420 V; 50 Hz; 3 ph; 1450 rpm. Displacement: 72.20 m3; 19/25 bar Power with cooling conditions and refrigerant R407C: 39.32 kW Power with cooling conditions and refrigerant R404A: 41.27 kW Power with conditions and refrigerant R134a: 31.45 kW 4x Plate heat exchanger Manufacturer: GEA WTT Gmbh Type: WP7M-120 Y.O.M.: 2006 max. Pressure: 30 Bar Temperature: -195/+195 °C Content Page 1: 13.69 Ltr. Content Page 2: 13.92 Ltr. 2x Liquid collector Cat. 2 Manufacturer: FricoMEC Type: RV-300X606 Volume: 35 Ltr. Pressure max:28 bar Temperature: -10/+120 °C 2x Inverter Manufacturer: Fuji Electric Type: FRN18.5F1S-4E 3ph 380/48 ...

ATMOS PDS PDP 35 towable air compressor was built by ATMOS Chrást s.r.o. in the Czech Republic in 2021. The machine is used wherever top-quality compressed air is required. Its components from renowned European brands ensure the highest possible energy efficiency throughout its entire service life. The compact design based on a single-axle trailer, in turn, allows operation in all conditions, both at low and high temperatures. The ATMOS PDP 35 diesel air compressor weighs 768 kg. The machine has only been used for 350 hours and is in very good condition. At 250 operating hours a service was performed. Technical specifications of the ATMOS PDS PDP 35 rotary screw compressor - motor power: 35.7 kW - working pressure: 7 bar - maximum capacity: 5 m3/min - power source: combustion engine - operating hours: 350 h - weight of the ATMOS machine: 768 kg

Specifications: • RKT refrigeration dryer for the treatment of compressed air • 10 bar operating pressure • 4 kW • 400 V • 570 l/min effective delivery rate • ECN pressure vessel 270 l powder-coated • Duplex filter set WBF 63 MFO/CA consisting of Microfilters and activated carbon filters incl. automatic float trap (for paint booth) • Oil-water separation system KON-C2 incl. inlet and outlet fittings • 2 fully automatic tank drainage valves KN 1.230 Year of Make: 2025 Price: We ask for your binding offer. Available from: immediately Terms of delivery: ex location – EXW Berlin Payment Terms: Payment before pickup Accessories without guarantee. The following applies: "Object bought as seen". The prospective buyer must satisfy himself on site of the completeness of the property.