air compressor 30 used for sale

Didar Part Number 2600134944 NSN 12-163-2290 Original Part Number 5900980220 In-Pipe Water Pressure 3.5 – 7 bar Out of Pipe Air Pressure 2.6 – 4 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 220 °C Amount of Water in the Pipe 12 Lt. Amount of Air Outside the Pipe 38 Lt.

KÜBA evaporator type SHB 127 with 3 fans diameter 710mm, lamellar distance 8mm, with new defrost heater. 107 liters capacity. 3 pcs.

Shock freezing evaporator EKO with 3 fans, type ESL 63.33.12Y, lamellar distance 12mm, defrost heater, fan diameter 630mm,

FlowCook completely stainless steel suitable for thermo-oil heating Belt length ± 13,000 mm Track width ± 600 mm Executing belt Belt washing system electric lifting device for the cap Total dimensions (L x W x H) : ± 15,000 x 2,200 x 3,000 mm

Blast Freezer, shock freezer EKO with 4 fans, type ESL 63.42.12D, lamellar distance 12mm, defrost heater, fan diameter 630mm

The radial fan is unused and has not been installed. For further technical details, please refer to the type plate. Price is negotiable. Shipping possible. The sale is carried out on behalf of the customer. Prior sale and error excepted. The terms and conditions of Cleantec-MR apply.

with 8,000 m³/h air volume. 11 KW fan 32 filter units Filter area 144 m2 Diameter of the filters 145 mm Deprivation via briquetting press with a nominal throughput of 100 kg/h Material-dependent

with 6,000 m³/h air volume. Standard emptying in 3 containers. Reliable, quiet and easy to use. CLEAN AIR BLOWER 7.5 KW Filter area 30 m2 Footprint 350 x 110 x h 244 cm

with 8,000 m³/h air volume. 11 KW fan 32 filter units Filter area 144 m2 Diameter of the filters 145 mm Standard emptying in 3 containers of 200 litres each Installation dimensions 350 x 110 x h 245 cm Reliable, quiet and easy to use.

Ingersoll Rand Man Rider Winch available for sale. Make: Ingersoll Rand Man Rider winch Model Number: FA51-MR24MK1G/06144 Serial Number: A015878 Year: 2010 Man Lift SWL: 6875 lb at 75 fpm at top layer Utility SWL: 11000 lb at 54 fpm at top layer Press: 90psig FLOW: 700 ROPE DIA: 3/4INCH Drum Size in: 15 Barrel Dia: 27 Flange Dia: 24Lgth

Electromechanical actuator for valves, valve drive, actuator, servomotor, air damper actuator -Manufacturer: Siemens/weishaupt, actuator for air dampers and gas dampers -Type: SQM45.291A9WH -Dimensions: 135/130/85 mm -Weight: 1.0 kg

Electromechanical actuator for valves, valve drive, actuator, servomotor, air damper actuator -Manufacturer: Siemens/Landis & Staefa, air damper actuator -Type: SQN75.6K4A11 -Voltage: 110 V -Number: 2 pieces available -Price: per piece -Dimension box: 155/110/70 mm -Weight: 0.4 kg/piece

HOT AIR GENERATOR by wood . NEW machines in prompt delivery model F28 , F55CV , F85CV , F120CV Availability : ready in stock ( unless sold ) CE mark : Yes Declaration CE : Yes Instruction Manual ( Yes )

Electromechanical actuator for valves, valve drive, actuator, servo motor, air damper actuator, air damper actuator motor Manufacturer: Siemens, air damper actuator -Type: SQN70.464A23 -Quantity: 2 pieces available - Price: per piece -Cardboard dimensions: 150/100/70 mm -Weight: 0.4 kg/piece

HOT AIR GENERATOR by wood . NEW machines in prompt delivery model F28 , F55CV , F85CV , F120CV Availability : ready in stock ( unless sold ) CE mark : Yes Declaration CE : Yes Instruction Manual ( Yes )

Used Carrier 30 RB 0802 air cooled chiller. Complete with 12 Performer scroll compressors SH300A4ACA. Shell & tube evaporator/exchanger 284 ltr. Copper/alu condensor with 12 Axial fans with a total airflow of 54.167 l/s and Pro-dialog plus controling. Specifications Our inventory stock No. 13231 Brand Carrier Type 30 RB 0802 Product type Air Cooled Chiller Capacity kW 774,0 Capacity Tons 220,1 Refrigerant Freon Refrigerant Type R-410A Weight in kg. 6740 Sizes 7300x2250x2240 Compressor(s) type & model 12x Performer SH300A4ACA Display Pro-Dialog plus Number of fans 12 Fan specifications 960 RPM Remarks | Y.O.B. 2006 Amount in stock 2 We have hundreds of different chillers, see our other advertisements or visit our website.

Available in stock 4 x Capstone Air Filters. 1 unit was NEVER USED and is sold inside the original packaging. The other three units are used but are in good conditions. Most commonly used for Microturbines C30. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Used Kuba CAV L08-2x4C condenser. Complete with 8 fans - 50 Hz - 0,9/1,2 kW - 620/720 RPM - Diameter 800 mm and a total airflow of 143.040 m³/h. No. 13476 Brand Kuba Type CAV L08-2x4C Product type Air Cooled Condensor kW 587,3 (Freon) Number of Fans 8 RPM of the Fans 620/720 Air Flow in m³/h 143.040 diameter fans Ø 800 mm Surface (m2) 1.778 Tube volume 288 dm³ Sizes 8600x2370x2100 mm (LxWxH) Weight 2100 kg Remarks | Y.o.b. 2003 Amount in stock 1

Used and in very good condition Alfa Laval BCD E905BD P SW CBP air cooled condensor. Complete with 10 fans from Ziehl-Abegg designed for 60ºC, 50/60 Hz - 0,68 kW - 570 RPM - diameter Ø 910 mm. Capacity at delta 598,8 kW and 169.200 m³/h. Capacity at Y 519,5 kW and 135.400 m³/h. Specifications: Our internal stock No. 12244 Brand Alfa Laval Type BCD E905BD P SW CBP Product type Air Cooled Condensor kW 598,8 (Freon) Number of Fans 10 RPM of the Fans 570 Air Flow in m³/h 169.200 diameter fans Ø 910 mm Surface (m2) 2.286 Tube volume 200,5 dm³ Sizes 9230x2300x1400 mm Weight 1.662 kg Remarks | y.o.b. 2016 Amount in stock 1

Used Air Cooled Condensor Güntner AGVH 080.3A/2x4N(D).E, build in 2007. This used Condensor has 8 fans: - kW / - RPM / Ø = 800 / 153600 m³/h Specifications: Our internal inventory No. 7428 Brand Güntner Type AGVH 080.3A/2x4N(D).E Product type Air Cooled Condensor kW 677 (nh3) Number of Fans 8 Air Flow in m³/h 153600 Surface (m2) 2003 Sizes 8100x2300x1800 mm (LxWxH) Remarks | y.o.b. 2007 // Fan: - kW / - RPM / Ø = 800 Amount in stock 2

Switch cabinet cooler, SK250E2V-20100, BKW, mint condition Special price The current price of a similar product is € 4.800 excl. VAT If you have a VAT number, we will gladly issue you an invoice without VAT. Mint codition! We have tested the switch cabinet cooler - it cools immediately! The part was purchased from a spare parts warehouse of a company, had been in stock there for some time (built in 1998), according to its condition it had never been in operation. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange,  ...

Rolls 0.5m x 20m 1.5m x 20m 2.0m x 20m 2.5m x 20m 3.0m x 20m 9,50€ / SQM

Ventilation system Howatherm , 16.000 m3/h, with speed control via Feqwenzumrichter Danfoss, filter, heat exchanger cold/warm, Silencer, control box, etc. Used for laboratory purposes only. Very good condition, as good as new. Price on request.

Air filter from Jenbacher J316 for sale

Stock no.: 503260 Machine/ Device Type: Dry Air Dryer Manufacturer: Anvil+Longleg Type: Sectional dryer H150 Year of construction: 2011 Sectional dryer H 150 with 8 sectional boilers à 100 l Tank capacity: 8 x 100 L Air flow: 400 m³/h The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the dryer system adapts individually to the operational requirements and can be realized in the smallest space. The dryers work dew point controlled and with an energy-saving heat exchanger. Depending on the production requirements, the air flow rate is regulated between 140 and 400 m³/h by process control. Each dryer boiler has an individual temperature control. A separate scanning of the dry goods prevents overdrying and insufficient Drying due to excessive material removal.  ...

pneumatic angle grinder, flex, grinding witch, cut-off grinder, cut-off machine, angle grinder -pneumatic straight screwdriver -Operating pressure: 6 bar -Speed: 900 rpm -Price: per piece -Number: 2 pieces -Dimensions: 380/42/H67 mm -Weight: 1.4 kg/piece

Air conditioner, air conditioning -Transfer: in the current condition as seen -Housing back wall: slightly deformed at the top -Stulz: MINISpace EC room cooling CCD 61 A -Power: approx. 6.8 kW -Dimensions: 600/670/H2250 mm -Weight: 172 kg

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louver damper -Ventilation duct inlet with: filter -Outlet: Ø 390 mm -Dimensions: 1340/1100/H600 mm -Weight: 114 kg

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Mann air filter housing with: filter -Inlet/outlet: Ø 80/70 mm -Part Number: 43 905 63 8981 -Dimension: Ø 260/400 mm -Weight: 11.5 kg

WIWA High Pressure Pump 235.42R / 38042, YOC 2000 With high flow rate, ideal as a feed pump for airless sprayers (united for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Gear ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Flow rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm

Compressed air breathing apparatus, respiratory protection -2 bottle device -Overpressure with: pressure reducer -High pressure manometer -Demand valve with: integrated warning device -Thread connection: M 45 x 3

ALKO ECO-JET 35/3N clean air extraction Year of construction: 2004 M-Nr.: 33184130 Suction supports: ø250 mm Length: 2.925 mm Width: 1,230 mm Height: 3,440 mm Weight: 816 kg Capacity: 3,000 m3 /uur Pressure: 3,050 Pa Power supply: 4.kW, 380V, 9 Amp Filter surface: approx. 23 m2 Cleaning: compressed air Noise: 77 dB(A)

Nominal mass of falling parts, taking into account the mass of the upper stamp (500 kg.), Kg. 5000 Actual mass of falling parts without top stamp, kg. 5030 Effective kinetic energy of falling parts at full successive impacts, kgc m 12500 The greatest working stroke of a woman, mm. 1300 The smallest height of dies without shanks, mm. 400 Distance between guides in the light, mm. 800 The length of the woman in the direction perpendicular to the front of the hammer, mm. 1180 Steam (air) pressure before entering the cylinder, atm. 7-9 Nominal mass of the upper die, kg 500 The largest mass of the upper die, kg. 1500 The highest permissible steam temperature, ⁰C 200 weight 145-148ton, weight of anvil block 75+22 ton.

Rotary drive for air flaps, rotary air flap drive -Manufacturer: Siemens -Type: GBB161.1E -unused from: warehouse liquidation -Number: 3x available -Price: per piece -Dimensions: 340/105/H105 mm -Weight: 2 kg

Capacity :10 tons, Weight of falling part,nominal mass of drop parts without upper instr.:9 tons, Effective working kinetic energy after blow :25000 kg mtr., Max. working ram stroke :1400 mm, Max no of blows : 30/min , Distance between slides : 1000 mm, Shut height : 775 mm , Ram size front to back :1200 mm, Bolster size front to back :1200 mm, Air pressure : 7-9 MPA , Height of instruments : 450 min., Die-holder front to back dimensions: 1400 mm, Height above floor level: 7270 mm, Hammer dimensions : 4400x10420x2700 mm, Weight (less anvil block): 73.5 ton, Weight of anvil block : 203.8 tons.

Compressed air dryer, refrigeration dryer, dryer, compressed air refrigeration dryer -Drying capacity 1200 L / min -Max. Pressure: 13 bar -Operating voltage: 240 V -Dimensions: 485/350 / H450 mm -Weight: 23.5 kg

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Air filter housing -for: filter donaldson XLP 18 2046 -Inlet/outlet: Ø 150/149 mm -Price: per piece -Number: 1 piece -Dimension: Ø 355/595 mm -Weight: 12.35 kg

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Air filter housing -Inlet/Outlet: Ø 60/61 mm -Dimensions: Ø 166/450 mm -Bracket dimensions: see photo -Weight: 4.45 kg

Air spring bellows, roller bellows, air cushion, air filter housing -Knecht combination air filter -Inlet/Outlet: Ø 57/60 mm -Type: LVPO 045 S/9 -Price: per piece -Quantity: 1 piece -Dimensions: Ø 165/365 mm -Weight: 3.2 kg