air compressor 30 used for sale

Boiler capacity: 270l; Maximum volume flow: 0.92m³/h; Motor power: 5.5kW; Refrigeration dryer: Yes; TD 270 ADV3: C100, HD6505.5 kW, 400V/50HzPressure: 10 barLanguage: GermanPainted on compressed air tank 270 l AD2000With refrigerant dryerHS code: 84148075

II sell a BITZER screw compressor. Fully functional. The compressor has 18470 working hours. It worked in a production hall on a chiller with a water condenser. The compressor has a power supply of 660 - 720 V The compressor worked with R 134a refrigerant.

Mobile compressor ROWI DKP-2200/50/3V, 2,200 W, 10 bar, 50 l container, year 2015

Small compactor / crimping device CPD 1.1, Limbacher Maschinenbau GmbH, nameplate not found, (predecessor of container packer CP 1.100)

Screw compressor RENNER RSDK-PRO 3.0 year 2021 10 bar, 410 ltr/min, 3 kW, compressed air dryer RENNER RKT+0035 type 1481A 16 bar year 2020/21, S/N 200030820, 90 l pressure vessel BWB 366 913 11 bar year 2020

Including: (1x) OKS vertical pressure vessel, Capacity: 900 liters, 11 bar, Year of construction: 2014. Auction-ID: A1-45979-88

Screw Air Compressor 15kW. Current：20HP /15kW( Y-Delta Start). Flow Rate:2.2 m3/min (77CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size：G3/4. Lubricant Oil: 10Liter Machine condition: unchecked. Approx. Transport dimension: LxWxH 830 x 1300 x 1200 mm; Approx. Weight: 339kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-311

Serial number: 0262993 Permissible operating overpressure: 10 bar Power: 15 kW Volume flow: 2.08 cbm/min Auction-ID: A7-46287-146

Serial number: 2888 Nominal power: 15 kW Motor speed: 3000 rpm Permissible operating overpressure: 10 bar Auction-ID: A7-46287-100

Screw Air Compressor 11kW. Current：15HP /11kW ( Y-Delta Start). Flow Rate:1.6 m3/min (56CFM) Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size：G3/4. Lubricant Oil: 10Liter. Machine condition: unchecked. Approx. Transport dimension: LxWxH 830 x 1300 x 1200 mm; Approx. Weight: 320kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-201

Screw Air Compressor 7.5kW. Current:10HP /7.5kW/ 10A ( Soft Start). Flow Rate:1.1 m3/min (38CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size: G1/2. Lubricant Oil: 5Liter Machine condition: unchecked. Approx. Transport dimension: LxWxH 750 x 980 x 1010 mm; Approx. Weight: 206kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-42

Two water-cooled chillers of the same size 6°C/12°C each 500-1300 KW cooling capacity, stored in their original packaging in a dry hall. No longer installed due to project stop. Original price 130.000 €

Screw compressor 7.5 KW 10 bar 400V Emergency stop Digital info screen Auction-ID: A1-41994-94

Copelametic - D3DS5-150X-AWM/D - 2x industrial compressors Auction-ID: A1-46070-245

Copeland - Industrial refrigeration compressor unit 1x Condition: Used Auction-ID: A1-46070-334

Bitzer Kühlmaschinenbau GmbH cooling compressor, type: 6J-22.2Y-40P. - Fluid tank - Oil separator - Pressure gauge set with all necessary safety devices - Fluid filter/dryer with sight glass - Control panel - Cooling capacity: 21.8 kW/6.4 tons - Refrigerant: R507 - Nominal power: 400 V - Power consumption: 13.94 kW The stated cooling capacity of 21.8 kW is based on the refrigerant R507 at -30°C / +40°C. The cooling capacity at -10°C / +40°C is 54 kW.

Functionality must be checked, possibly usable as a spare parts carrier.

Brand: Atlas Copco Type: GA37 VSD Serial Number: API57877 Year of construction: 2008 Power: 37 kW Max pressure: 13 bar Flow rate: ± 7.25 m³/min Voltage: 400V – 3 phase Speed: ± 3730 rpm Weight: ± 1075 kg Extra info (very important!) Operating hours: 39,627 hours Last service: 30-07-2024 Auction-ID: A3-43525-11843

- Operating hours read: approx. 563 (operating hour meter has been replaced); - Operating pressure: 7 bar; - Power: 22.6 KW; - Engine running; - General operating permit available (ABE) - Chassis needs to be repaired; - Video on request; - Viewing recommended; Auction-ID: A1-46334-226

Brand: Atlas Copco Type: GA75 VSD FF Year of construction: 2012 Serial Number: API680242 Power: 75 kW (100 HP) Voltage: 400V – 50 Hz – 3 phase Flow rate: ± 15 m³/min Max pressure: 12.8 bar Speed: 3000 rpm Weight: ± 1654 kg Operating hours: 33,599 hours Last service: 26-10-2022 Auction-ID: A3-43525-11841

Screw compressor CPA 10/10 DX 270, 1000 l/min, 10 bar Year of manufacture 2021 little run Features: Low-noise, complete & compact Designed for high performance, efficiency and reliability, this system is ideal for any workshop The extremely low noise level allows installation even without a separate compressor room The integrated dryer enables problem-free painting and sandblasting work. But even the usual air tools thank water-poor air with a considerably longer shelf life. The system is extremely easy to operate and maintain. Technical data: Type: CPA 10 DX Motor power: 7.5 kW/400 V Delivery rate: 1000 l/min Operating pressure: 10 bar Boiler volume: 270 l Refrigeration dryer: integrated Noise level: 66 db(A) Integrated star-delta switch Weight: 341 kg Length: 1200 mm (to the right there is space for the intake) Depth: 670 mm (space must be provided for suction at the rear) Height: 18 ...

Machine type: Screw Compressor (Total Air System) Manufacturer: Ingersoll Rand Model: R5.5ie Execution: Tank-mounted (integrated air receiver) Serial number: 15M-021033 Year: 2016 Working hours: n/a Power: 5.5 kW Voltage: 230 V / 50 Hz Frequency: 50 Hz Flow rate: approx. 0.64 m³/min (64 cfm) Max pressure: approx. 8–10 bar (typical for model) Refrigerant: R134a (integrated dryer) Noise level: < 70 dB(A) Control: Electronic control panel Cooling: Air-cooled Tank: Integrated compressed air receiver Dryer: Integrated refrigeration dryer Remarks: Compact total air system with integrated tank and dryer. Used condition, functional status not tested. Visible signs of normal industrial use. Own mass: approx. 250 kg Dimensions (LxWxH): approx. 1,500 x 700 x 1,400 mm Auction-ID: A7-45993-12

Equipped with: air capacity of approx. 5.5 to 8.4 m³/min depending on the set working pressure (7 – 14 bar), equipped with a Kubota 4-cylinder diesel engine (approx. 54.6 kW), fuel tank of approx. 140 liters, designed for continuous use under harsh conditions and operates at ambient temperatures of approx. -10°C to +45°C, length: approx. 4025 – 4615 mm, width: approx. 1510 – 1790 mm, height: approx. 1285 – 1525 mm, operating weight: approx. 1580 kg, working pressure: 7 – 14 bar, noise level: approx. 67 dB(A) at 10 m, air connections: 1x G11/2, 3x G3/4, stage V emission standard (diesel with particulate filter), electronic control (SIGMA CONTROL SMART). Auction-ID: A1-40137-82

Unused oil-free low-noise 100 liter compressor, 65 dB Auction-ID: A1-40418-76

Compressor Schneider as good as new, only 47 and a half operating hours, only used at trade fairs no continuous operation Technical Specifications & Highlights Capacity: approx. 500 l/min suction capacity (approx. 350-400 l/min delivery volume). Pressure: Max. 10 bar. Container: 60 litres (horizontal, mobile). Drive: 400V three-phase (D-model) – provides a powerful start-up and is more efficient than 230V models. Speed: V-belt-driven 2-cylinder unit with low speed (smooth running, less wear). Auction-ID: A1-46501-271

Unused oil-free low-noise 100 liter compressor, 65 dB Auction-ID: A1-40418-215

Bitzer OSNA8571-k New open screw compressor for R717 (NH3). All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Bitzer OSKA 5341-k open Schroef compressor R717 NH3. Open Schroef compressor for ammonia R717. All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Dorin K50CS All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Technical data: see pictures Auction-ID: A1-46607-67

Volume flow: 18.16 mc/min Operating pressure: 13 bar Suction pressure: 1 bar Speed: 2200 rpm Approximate dimensions: 2500 x 1400 x 2200 mm Warning: the information reported has been taken on board the machine using measuring instruments and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-711

Operating pressure: 7.5 bar Size: approx. 2400 × 1250 × 1450 mm Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-739

2-motor compressor with storage tank Estimated weight: 85 kg Approximate dimensions: 1600x700x1400 mm Auction-ID: A7-46655-12

Pressure: 7.5 bar Flow rate: 28 lt/sec Power: 11 kw Serial: ARP 73928 Estimated weight: 120 kg Approximate dimensions: 1200x800x1000h mm Auction-ID: A7-46655-11

Silenced screw compressor Power: 30 HP Pressure: 10 bar. Serial: 31006173 Estimated weight: 60 kg Approximate dimensions: 1300x900x1300 mm Auction-ID: A7-46655-10

Stock number U1984-2 Used impact dryer for pellet by RIETER (Germany) model AERO 500 in stainless steel design (material 1.4541, AISI 321). Dryer is equipped with air blower providing 90 m3/min and driven by electric motor with power 18.5 kW. Dryer has reported output 4000 kg/h of outgoing product. Flow rate of water with pellet: 35 m3/h (maximal), 25 m3/h (nominal) and 20 m3/h (minimal). Nowadays machine has installed screens with mesh 1.2 mm. Machine new 1997. Shipping dimensions of dryer: width 1400 mm x length 3830 mm x height 2265 mm. Weight of machine – 700 kg. Body of drying chamber is sound-muffled. Technical documentation included in german language. Machine had been working on PP pellet.

Water cooler, ruck cooler GEA, 400-600KW.with radial fan, suitable for air duct as heating or to blow into the open.

Material: steel Engine 11 kW Very good condition. You can also get the entire system with all components.

Air pressure-done piston pump aerial entrance pressure max. 8 cash Max Materialvolumenstrom Materialvolumenstrom materialvolumenstrom 4.5 l / min. translation 30:1 224 cash material temperature max. 90°C high-grade steel execution (changes and mistakes in the technical data, information and prices as well as intersales reserve!)

Air-cooled liquefaction kit Bitzer without compressor,Type LH135/F302H, New, Base plate with condenser and collector

Air dryer Mobile for 17-24 Nqm/h 219W.

Blacksmith hammer / air hammer Zeva machines 16 bear Air / forging hammer 16 bear Max 250 strokes/min Working cylinder diameter 90 mm Stroke approx. 170 mm CLOUT approx. 16 bear Anvil is connected to machine Ambosswerzeug can be changed CLOUT and Geschwindegkeit can be controlled with foot switch and hand 1.5 KW, 250 kg If you are interested in air hammers with 25Baer, 40Baer, 55Baer and 75Baer write me a short message!

Full stainless steel heat exchanger in round shape. Previous use: heating air with steam. Suitable for heating or cooling aggressive gases/air.

Dynamic airflow separator (sifter) for minerals, cement, recycling etc., rotor diameter: 700 mm, turbine wheel occupied with 64 blades / turbine blades, outer ring occupied with 36 manually adjustable counter wings, incl. drive. In very good condition.

Make : Wolf Type: WLE-S-180 Built: 1993 Dimensions: 1.3 m x 2.2 m x 2.6 m (approx. WxLxH) Heating unit: 209 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 14,000 m3/h; 7.5 kW; 1435 rpm Location : Camp Herzogenaurach Sales price: € 2,990,- net, from location This plant is already on sale, similar we have in stock. We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please contact us, tel. 0171-9508841.

All prices are from Station Germany. All follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are owner, manufacturer or operator information and therefore non-binding for us. Customer protection is agreed between the parties. Place of jurisdiction Germany. All agreements are made in accordance with German law. Customer protection agreed after ICC Paris Intermediate sale, other use, exploitation and error are expressly reserved.

Air starter Part no. 218006

Various varieties in stock

Ready to ship