air compressor 30 used for sale

Alfa Laval UVPX 307 AGT 14 Separator Centrifuge Oil Fish, Olives 5750l/h Motor 5.5 kW

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 300 mm -Piston diameter: 100 mm -Piston rod: 20 mm -Air inlet and outlet: adjustable -Number: 2 pieces available -Piece price: 125 euros VAT. -Dimensions: 605/182/H165 mm -Weight: 10 kg

T-slot plate, clamping plate with holes, plate field, welding table, welding table -Dimensions: 3012/2010/H710 mm -Panel thickness: 82 mm -Plate: with supporting ribs -Weight: 3370 kg

Bending tool, die, lower knife, lower tool, lower beam, -Tool: for folding machine -Widening: for lower cheek -Dimensions: 33/76/3040 mm -Bore distance: 280 mm -Hole diameter: 18 mm -Length: 3040 mm -Weight: 33 kg

dmp Sondermaschinenbau type ORL-300 orientator for plastic bottles, bottles where the caps are not in the correct position to the position of the labels are turned by 180° before being delivered to the next machin, capacity 120 bottles per minute, electrics 3+N+PE 400V/50Hz/16A, power consumption approx. 1,1 kVA, compressed air max. 6 bar, machine floor space approx. 1200 x 1050 mm (LxW), machine height approx. 2100 mm, machine net weight approx. 200 kg

Straightening ruler, straightening rail -Angle: 32° -Dimensions: 3000/50/H8 mm -Weight: 8.4 kg

Cleaning container, safety container, cleaning container -Material: sheet steel -Container: Ø 295 x 235 mm -Strainer basket: Ø 265 x 100 mm -Number: 3x devices available -Price: per piece -Dimensions: 310/370/H740 mm -Weight: 8 kg

turn - diameter over facing slide: 450 mm turning diameter over bed: 830 mm turning diameter: mm turning length: 3000 mm control: Siemens total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

6000w TruDisc 3000 x 1500mm Big specification

Geared motor, electric motor, electric geared motor -Speed: 3.55 rpm -Power: 0.55 kW -Shaft diameter: Ø 50 mm -Design: B5 -Protection class: IP 54/55 -Number: 3x motors available -Price: per piece -Dimensions: 630/300/H270 mm -Weight: 62 kg

Key data: 3050 mm, 1200 mm, 120 mm

Technical version: Console table 3050 x 1200 mm with manually movable 6 brackets, 2 vacuum cups per console and a pneumatic excavation rail Spot laser set-up aid, vacuum pump CNC control XILOG Plus Main spindle 7.5 kW HSK 63F with C-axis, 1500 – 24,000 rpm Tool changer plate 10-fold 1 adapter unit swivel saw Drill head with: 12 vertical spindles, 4+2 horizontal spindles, groove saw Installation dimensions: 6800 x 3040 mm Weight: 2850 kg

geared motor, electric motor -Speed: 3.55 rpm -Power: 0.25 kW -Design: B5 -Shaft diameter: Ø 40 mm -Protection class: IP 54/55 -Number: 1x motor available Price: per piece -Dimensions: 550/250/H280 mm -Weight: 40 kg

Pfeiffer Vacuum Hicube 300 brand new, in stock. 12 months warranty.

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 302 mm -Height: 12 mm adjustable -Disk milling cutter -Socket: Ø 60 mm -Number: 2x milling cutters available -Price: per piece -Weight: 14.8 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 300 mm -Height: 12 mm -Disk milling cutter -Socket: Ø 60 mm -Number: 3x milling cutters available -Price: per piece -Weight: 12.7 kg

CNC lathe LB 3000 EX II Manufacturer: Okuma Corporation Year: 2017 Control OKUMA ... OSP-P300LA Turning diameter... 580mm Rotation length ... 950mm Inclined bed Axis Y... 120mm Spindle bore ... 91mm Tool turret ... 12/12 Axis X ... 260mm Axis Z ... 510mm Spindle speed... 0-5000/min. Rapid traverse of the X axis ... 25m/min Rapid traverse of the Z axis... 30m/min Rapid traverse of the Y axis ... 12.5m/min Axis C ... 360° Main engine power... 22kW L x W x H ... 3420 x 2041x 2444 mm Machine weight ... 6600kg The machine is in good condition, possible to test under electricity.

Brand: Zerma, model: GSL 300/800, motor: 18 Kw (25 hp), stepped rotor, year: 2003. With electrical panel and vacuum cleaner: 2.2 Kw (3 hp).

Key data: 610 mm, 1080 mm

Stock number: 3860 CNC LATHE Manufacturer: Mazak , Type: Integrex 300 II SY Year of construction: 2002 Specifications: Max. circumferential diameter 610 mm dia. Max. turn. About Bed 610 mm Dia. Turning length 1080 mm Main motor power 26 kw Main spindle speed range 35-3500 rpm Spindle bore 65 mm dia. C axis - main spindle movement 0.001 degrees X axis movement 580 mm Z Ash Movement 1137 mm Y axis +/- 115mm mm B Axis Movement -30° to +195° Degree B axis spindle speed 10,000 per/min B axis spindles effect 15 B axis tool system KM 63 Z Aksen rapid traverse 30 m/min Counter spindle C Axis - Counter Pindle Movement 0.001 Degree Motor Power Counter Spindle 22 Kw Control Mazatrol PC-Fusion 640MT Fabr. Spindle operating hours 6483 hours Accessories: ATC Tool magazine with 80 stations Miscellaneous tools Cooling by spindle  ...

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for drive heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 305 mm -Short taper: 8 -Number: 1x discs available -Price: per piece -Weight: 15.3 kg

Type CK-3000B Height of working table 800mm Working depth 80mm Working length 2500mm Motion controller Loran Max traveling speed 150m/min Max working speed 105m/min Control system TPR Spindle power 2x 2.2 kW Spindle speed 0-18000 rpm Transducer Jiale Air pressure 0.6-0.8 Mpa Motors power 750+750+400W Transport dimensions 4200x1700x1400mm Weight 900KG Price 6499 Eur (EXW Jonava, Lithuania)

Threaded rod, threaded bolt, threaded rods according to DIN 975 -Diameter: M24 -Threaded rod: galvanized -Quality: 4.8 -185 pieces, length: 2000 mm, price per piece: 15 EUR net -19 pieces, length: 3000 mm, price per piece: 20 EUR net

Stock number: 3845 CNC BED MILLING MACHINE Manufacturer: CME , Type: MB-3000 FLEX Reconditioned spindle Year of construction: 2006 Specifications: Spindle speeds 2200 rpm Boring Spindle dia. 150 mm

3000 B CNC circular saw blade grinding machine was built in 2023 in Poland. The brand-new machine, equipped with intuitive software and a CNC controller with memory for 128 programmes, is used to sharpen the following types of circular saws, mainly used in the furniture industry for cutting laminated chipboard: – flat circular saws (GM) – alternately mitre circular saws (GS) – trapezoidal circular saws (GB) – trapezoidal-flat circular saws (GA) The 3000 B CNC circular saw sharpener allows for grinding tooth rake angles and tooth face angles in a single pass without removing the saw blade. The grinding wheel arrives at the tooth plane at two feed speeds – the slower feed increases grinding precision, while the faster one reduces sharpening time by up to half. To ensure precise feeding of the tooth under the grinding wheel, a claw feeder is used, which prevents the grindin ...

Output module, control card, output card, controller -Manufacturer: Bosch -Type: 047832-304401 -Type: 047832-303303 -Number: 1x control cards available -Price: per piece -Dimensions: 140/160/H15 mm -Weight: 0.14 kg

Bowl cutter Kilia 50l 3000 RS Express 50 liter stainless steel bowl Operation via push button 2 knife speeds 2 bowl speeds Mixing speed forwards and backwards 6 pcs. knife head 3 pcs. knife head Rated power 15 kW, total rated current 33 A Operating voltage 380 V / 50 Hz Weight approx. 950 kg

Line choke, air gap choke -Type: 3005a/32532 -Price: per piece -Number: 5x available -Weight: 2.2 kg

Ref. No.: 850162 Item No.: 40219 F. Nr: 193 Connection: 380 V /50 Hz

PLC controller, expansion module, interface module -Manufacturer: SIEMENS -Type: Simatic S5 6ES5 305-7LA11 -Number: 1 module available -Dimensions: 50/135/H300 mm -Weight: 1.1 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 300 mm -Depth: 150 mm -Edge: 17 mm -Drain: Ø 52 mm -Number: 7x available -Price: per piece -Dimensions: 340/H150 mm -Weight: 2.1 kg

Inv. Num. : 7225 Type: SBM - XS 300 G1E1 Producer: LISSMAC Created: 2015 Parameters: Hours: 166 Maximum sheet plate width: 15 mm Weight: 1400 kg

Control: TMJ Max.cutting range: 360 x 305 mm Cutting speed:10 ? 100 m/min Saw band dimension: 3660 x 27 x 0,9 mm Automated bar shift: YES Coolant tank:100l Chip conveyor: YES Made in Czech Republic

Builder: WILLIBALD Model: MINISHARK MS 3000 Engine: PERKINS 130 kW (180 HP) Data: L. 8.250 x W. 2.500 mm x H. 3.300 mm Year: 2017 Operative Hours: 3.900 h Hourly Production: 40 m³/h Shredding System: 18 HAMMER Rotor Data: D. 700 mm Fuel Tank: 140 L Weight: 9.000 kg Price: ON REQUEST!

table length: 1300 mm table width: 800 mm stroke height: 1015 mm weight max. in kg: 3000 kg : 220 mm connected load frequency: 400 V total power requirement: 1,5 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 1,3 x 0,8 x 0,23 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 127 mm -Outer diameter: 300 mm -Width: 18 mm -Price: per piece -Quantity: 1 piece available -Weight: 1.9 kg

Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T

: 300 mm : 300 mm : 300 x 260 mm saw band length: 3920 x 34 x 1,1 mm table height: 780 mm band speed: 20 - 100 m/min total power requirement: 3,7 kW weight of the machine ca.: 1,65 t dimensions: 2,0 x 2,05 x 1,7 m PROMOTIONAL PRICE 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) co ...

max. ram stroke: 2 - 300 mm groove width: 2 - 32 mm power capacity: 8 kW no. of strokes: 2 - 300 Hub/min throat: ca. 300 mm Max. installation height: ca. 450 mm automatic feeds: 0,01 - 0,15 mm work speed: 0 - 30 m/min return speed: 30 m/min weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2,5 x 1,5 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gebhardt roller curve conveyor 2 x 90° LINKS 610-500-300 with straight frame RA1210 The Gebhardt wheel curves with straight gear are from 2007 and are in a good (used) condition. It has a central engine of the SEW brand. Columns are not included in the scope of delivery. These are optionally available on request. Technical data: Manufacturer: Gebhardt Type: 1070.113 Built: 2007 Condition: good (used) Engine: fully functional Angle: 2 x 90° with straight frame Outer width: 610 mm Clamping length: 500 mm Length straight line: 300 mm Rolls Type: G6/50 sliding bearing with conical plastic Molding Power rating: 30 kg/m Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2/1.15 Conveyor speed: 0.35 m/s Weight: 110 kg Scope of delivery: without supports (if necessary please enquiries) Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoic ...

2 x 300 hl storage tanks, Fabr. Schulz Bamberg, bobbin bottom tanks, 0.9 bar, coolable via 1 cooling zone in the Double jacket, insulated with 130 mm and stainless steel sheet, with manhole in the lower frame, sight glass in the upper frame, with spray head with pulled down cleaning line, outlet pulled forward, ladder bracket, Crane eyelets, height: 4.25m, Ø: 3.95m, built in 2003, expanded

NNP 300l holding vessel Stainless 300L holding tank horizontal, with level detection

Transnorm belt conveyor GF 3000-700-600 RA2225 Technical data: Conveyor length (NL): 3000 mm frame width (NB): 700 mm, 900 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 2014 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 3000 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Ampere: 1,30 Co ...

Chuck adapter, three-jaw chuck, three-jaw lathe chuck -Outer diameter: Ø 300 mm -Camlock cone mount: Ø 139 mm, size 8 -Bolt circle: Ø 172x6 mm -Receiving thread: Ø 80x5 mm -Weight: 46 kg

Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 32 mm -Outer diameter: 300 mm -Width: 12 mm -Price: per piece -Quantity: 3 available -Weight: 1.7 kg

X-axis: 3000 mm Y-axis: 800 mm Z-axis: 720 mm Rapid traverse: X/Y/Z axis: 50m/min Control: SIEMENS 840D Recording: SK40 Speed: 18,000 rpm Mileage: total approx. 5,000 hours (of which approx. 500 hours since the overhaul) Spindle motor: 321V - 116 A Work table: W 3500 x L 820 mm Dimensions: L 5250 x W 4046 mm Drives: SIEMENS The machine is a 5-axis machine, where the turntable is both vertical, as well as horizontally. - Subject to technical errors and prior sale. -

Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 32 mm -Outer diameter: Ø 300 mm -Width: 4 mm -Price: per piece -Quantity: 5 available -Weight: 0.6 kg

Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 32 mm -Outer diameter: Ø 300 mm -Width: 6 mm -Price: per piece -Quantity: 6 available -Weight: 0.8 kg

MEMBRANE SKINNER, MAJA, TYPE: EVM 3006 Technical description: Serial number: 42728 Power: 0,75 Kw, 380 V, 50 Hz Working widht: 545 mm Dimensions: 1000 x 600 x 1050 mm This machine has only been designed for use in the meat processing industry. The EVM 3006 type is a membrane skinning machine used to open and manually remove the membrane and skin from pieces of fish, pork, beef, poultry, veal, game and horse. Only round and flat products may be processed on open membrane skinning machines (e.g. knuckle joints or thighs)

Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 32 mm -Outer diameter: Ø 300 mm -Width: 4 mm -Price: per piece -Number: 8 available -Weight: 0.6 kg

Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 32 mm -Outer diameter: Ø 300 mm -Width: 4 mm -Price: per piece -Number: 8 available -Weight: 0.6 kg

Pulling head, pipe assembly device -Internal threads need to be reworked -with electrical measuring connection -Dimensions: Ø 300/1050 mm -Weight: 215 kg