We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,376 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Air heater Manufacturer: GEA Happel Klimatechnik GmbH Type: MAXX M311D. BA3. X ATYPE Year of construction: 2004 Technical data: Rated voltage: 3 x 400 / 50 V/Hz Nominal power: 0.30/0.17/0.12 A Protection class: IP54
used
RECON Part number: 0405 2476 / 0400 6154 Complete with air start valve Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
used
Color: grey 400V 50 H Capacity: 8.5 kW, 32A Control voltage: 24V, 4-6 bar Temperature: 130 ° C, 76 dB
used
Air heater Manufacturer: GEA Happel energy-saving technology Type: standard performance Year of construction: 1985 Technical data: Speed: 900 RPM Flow rate: 9,600 m ³/h Heating capacity: 11,700 watts Inlet temperature: 15 ° C Outlet temperature: 51 ° C Heating system: 90 / 70 ° C Maximum operating pressure: 200 ° C / 8 bar In very good condition!
used
Dry air dryer No.: OD4 2201-4639 8.8 kW 400 V 50 Hz with funnel and auxiliary heating: T200 IX IZ 525-4639 Type: F2 Nr: 1AL 5153 4639 1,1 KW 400 V 50 Hz
used
Biological exhaust air purifier for odour removal, exhaust air treatment, bio-air purifiers, biofilters, air scrubbers used The exhaust air filter can be used for odour disposal in wastewater treatment, waste management, oil mills and malthouses, biogas plants, landfill degassing, carcass recycling plants and slaughterhouses. The exhaust air is first passed through an air scrubber / humidifier and then through the biofilter material. There, the unened odours are neutralized. Manufacturer S&H GmbH & Co. Umweltengineering KG Year of construction probably 2006 Dimensions: approx. 10.5 m x 10.5 m + 2.5 x 5 m Surface filter 9 x 9 m (internal dimension) Filter material: 149 m3 biomix and 24 m3 oak wood Bulk height 2.14 m The side walls are made of PE panels with support made of galvanized steel. The filter was installed in a biogas plant. We also have other components of the s ...
used
RECON Part number: 0215 4064 / 0400 5112 / 0400 3113 Air start ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
used
Renner compressed air tank Product description: Compressed air tank lying down Manufacturer: Renner SKU: 02280 Built: 2018 Condition: New device technical details: • Volume: 90 litres • max pressure: 11 bar • Compressed air output: G1 inches • Weight: 36 kg • powder-coated outside • Tmax: 100°C • Pieces: 4 pieces in stock High-quality compressed air tank Made in Germany (BWB container factory), with test certificate. metrics: • L x W x H: 970 x 290 x 410 mm Our price: 249,00 € (EUR) FP plus VAT from the grunow location (Brandenburg) (Changes and errors to technical data and prices reserved!)
used
Push-through guard depth requirements for pallet racks, Dim.: about 1,190 x 945 mm, used, good condition. Reasonably priced to sell. 25,000 units. Subsets can be ordered!
used
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Hosokawa Alpine 250 TTSP air classifier specifically designed to produce the perfect fineness cut for toner, can be used in connection with the Alpine 630 TFG jet mill Design: non PSR Material of construction - product contacting parts: mild steel - none product contacting parts: mild steel Wear protection: without Scope: 250 TTSP with 2 x 5,5kW motors, process gas distributor, filter, blower
used
Starter air Ingerssol overtaken edge
used
Original MTU Charge air radiator cooler for MTU diesel engine type 16V2000G26F (3B)
used
Original Charge air radiator cooler for MTU diesel engine type 16V2000G25 (3B)
used
Cylinder head air start in Exchange
used
Dimension 500 X 120 X 600 mm Power 380 volts, 3.3 KW
used
Dimensions 380 X 900 X 640 mm Cooling capacity 5200 Watts Power 220-volt, 2254-Watt, 11-A unused device
used
Cylinder heads for Deutz 716 on an exchange basis
new
RLA 160 Extraction system Dust nozzle diameter: 160 mm Engine: 2.2 kW 400 V 50 Hz Nominal volume flow at the nozzle: 1448 m ³/h Maximum flow rate: 2400 m3/h Filter surface: 9,21 m² Dust class M Residual dust content: H3 Chip collecting volume: 2 x 165 (193) l The maximum sound pressure level: 73 dB (A) Dimensions (L x W xH): 1755 x 830 x 1654 mm Weight: 267 kg G & pieces 5131620
used
Manufacturer: Busch Type: Mink MI 1502 BP Engine: 18.5 KW ; DS 400V Status: Used, partial performance: 6 months Volume flow: 500 m3/h compression pressure: +1.2 bar Accessory: additional suction filter (changed) ; Operating manual delivery time: approx. 1-2 Where.; ready for use
used
Rotary vane pump of Bush / AZO Air capacity: 160 m ³/h Power: 5.5 kw Vacuum capacity: 20 mbar
new
Electrically heated circulating air furnace (horizontal air flow) max. temperature: 550?C useable dimensions (w x h x d): 900 x 1300 x 1800 mm charge weight: 800 kg gross heating power: 72 kW circulation fan: 1 x 7,5 kW
used
Manufacturer: SABROE Tip: SV 140 off; very good
used
Manufacturer: Bush type: mink MI 1502 BP Motor: 18,5 KW; DS 400V status: used, without Warranty: 6 months Flow rate: 500 m ³/h discharge pressure: + 1,2 bar Accessories: additional intake filter (changed); Manual delivery time: approx. 1-2 where.; ready for operation
used
Technical data: -Operating temperature adjustable from 80 ° to 300 ° -Interior dimensions approx. B H 1000 x 1200 X 900 mm -mot. Small parts conveyor for feeding with small parts -Utility room 0.88 m³ -Total steam room 1.99 m ³ -Exhaust volume 85 m³/h -maximum amount of solvent 22 Gr. / per batch -Door opening B 1000 x H 1100 mm -Opening flap in the door approx. B 750 x H 270 mm -Power heater 24 kW -Power Fan 4.45 kW -Space requirement approx. B H 2000 x 2900 m. fan x T 1800 mm -Weight approx. 2000 kg -Control settings with or without timer min / hrs / day -Timer -controlled temperature preselection -Temperature display -Emergency - of - buttons
used
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Mikro Classifier CC22, from our former generation previous to our current technological evolution. This air classifier can operate off-line as a stand alone system or in-line as the perfect companion for a Hosokawa Alpine ACM 10 or ACM 15 impact classifier mill, to ensure no undesired fine dust particles are present in the final micronized product, usually in the ...
used
Warm air heating Spanex UL/E-50 RW-02 with chips 40 kW L x W x H: 1970 x 820 x 1570 cm Weight 530 kg Year 2012 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Cold regenerating adsorption dryer make SPX HANKISON type HHL 200Ser. -No: 347434-1204-2200 Year 2004minute / Max. Ambient temperature: +2 / + 45 °minute / Max. Inlet temperature: +2 / + 50 °Flow rate (based on + 20 ° compressed airsuction temperature and 1 bar absolute): 200 m³ / h.Pressure dew point at operating overpressure: -40 °minute / Max. Operating pressure: 5.0 / 16 barCompressed air connection: R 1Setting value Pressure switch Tank Pressure min.:0,91 bar ON: 0.7 bar OFFAdsorbent: activated aluminaContainer capacity: 93 lFilling weight per pressure vessel: 70 kgDimensions approx. W x D x H: 1150 x 750 x 1980 mmWeight approx: 310 kgWith- Level 1 controlused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our ...
used
Machine type: Dry air dryer for plastics Make: Somos R40 Color: Yellow Control type: 230V, 50Hz Dry air volume: 40m3/h Heating capacity Dry air: 4.5kW Heating capacity regeneration: 4.5kW Power: 0.4kW Total closing value: 4.9kW Additional information: recirculation cooler 1.8m2, max. temp. 130°C 3x1,1kW additional heating, 3x hand valve, incl. limit switch for air regulation - completely overhauled with 1 year warranty (except consumables) Location: Germany 3 x 25l GRP funnel on mobile frame Dimensions: 220x80x210 (=LxWxH in cm) Weight: 200kg
used
KRONES Air conveyors used- in very good condition Price: Euro 475,-- / per meter Complete with cable, stand, motor
new
2930-12-334-9601 / 0010985920 2930-12-F23-2495 / 8690980160
new
2930-12-334-9277 / 0052000675
new
2930-12-A07-0048 0030982820
new
2930-12-378-7717 5260981120
new
2930-12-378-7720 5260981220
new
Jenbacher Type 4 J412 Jenbacher Type 4 J416 Jenbacher Type 4 J420 Orginal Part Number 1202340
new
Siemens Gas Engine Guascor HGM 560 Siemens Gas Engine Guascor SFGLD 560 Orginal Part Number 7673532
new
General Electric Power Jenbacher Type 3 J312 General Electric Power Jenbacher Type 3 J316 General Electric Power Jenbacher Type 3 J320 Orginal Part Number 6141424 / 1212197 / 369829
new
The Junior 4.4 air cushion machine is a new, reliable, easy-to-use machine. This machine is designed to make air cushions made of "Bio Green" film in various dimensions to produce. The "Bio Green" films made of HDPE with DPA additives will be available in 12 – 24 months under Exposure to UV rays, moisture and bacteria degradable (ASTM D6954-04 certificate) and therefore very environmentally friendly. 1 table model Air-O-Pack Junior 4.4 Power: 8 – 15 m/min Setting options: adjustable chain length, temperature, speed, air volume Digital display and control unit Digital storage for air volume and temperature Fast film change Low noise max 60 dB Electrics 220/110 V, motor 120 W Warranty 6 months, excluding wearing parts Options at an extra cost Mobile chassis MS-01 € 270,-- mobile storage basket MB-02 € 270,-- Foot pedal € 60,-- Sensor control € 60,-- ...
new
MWM TCG 2020 V12-Nr. MWM TCG 2020 V16
used
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Turboplex ATP 200 air classifier for the perfect end product particle design. Our air classifiers allow you to split the product into two fractions, a fine and a coarse one, when a regular sieve can´t achieve this task due to product fineness or other characteristics. This is handy when you need to dedust the product removing the undesired fine dust or ensure a ...
used
Description Brand GUNTNER Model GHF 050/1E/17 ID 109454-16 Status Active Price 1.600 € + VAT Year of manufacture 2011 Location Oradea (RO) Cooling equipment | GUNTNER GHF 050/1E/17 manufactured in 2011. Size (L x W x H): 1000 x 500 x 500 mm. 2 pieces available, one missing a fan. Heat Exchanger Aligned or staggered tube pattern Special copper tubes for HFC, coolant and CO2 Stainless steel tubes for NH3 Surface-corrugated aluminium fins for high heat transfer Casing Corrosion-resistant aluminium alloy AlMg up to 500 mm fan diameter Powder-coated with RAL 9003 Hinged side cover with hinges Tray Hinged and thermally-decoupled (condensation free) Separate drip plate Corrosion-resistant aluminium alloy AlMg Powder-coated with RAL 9003 Large condensation drain with 45° incline Fans Proven quality fans Standard with two speeds (for fan diameter of 50 ...
used
Various pressure expansion vessels with solid steel gas filling, built in 2008, unused 2x Pneumatex Statico SU 500.6 Pressure expansion vessels (steel), year of construction: 2008, cylindrical, 500L, 6 bar, diameter: approx. 680 mm, total height with feet: approx. 1588 mm, permissible temperature range: -10°C-120°C 4x Pneumatex Statico SG 1000.6 Pressure expansion vessels (steel), year of construction: 2008, cylindrical, 1000L, 6 bar, diameter: approx. 850 mm, total height with feet: approx. 2189 mm, permissible temperature range: -10°C-120°C (unused) 3x Pneumatex Statico CG 3000.6 E Pressure expansion vessels (steel), year of construction: 2008, cylindrical, 3000L, 6 bar, diameter: 1,300 mm, total height with feet: approx. 2936 mm, permissible temperature range -10°C â 120°C (unused)
used
Suction system suitable for the offered plasma cutting system. Used but fully functional in good condition. Installation indoors and outdoors possible. With integrated start-up control. Receptacle with quick release. Technical data Power: 7.5 KW Air flow Demonstration possible.
new
MTU 8V396 TB 53 Heat Exchangers Charge Air Coolers Intercoolers 2930-12-334-9601 / 0010985920
new
MTU 8V396 TB 53 Heat Exchangers Charge Air Coolers Intercoolers 2930-12-334-9277 / 0052000675
new
MTU 12V396 SE 94 / TE 94 Exchangers Charge Air Coolers Intercoolers 2930-12-A07-0048 0030982820
new
MTU 16V4000 M 90 A BANK Heat Exchangers Charge Air Coolers Intercoolers 2930-12-378-7717 5260981120
new
MTU 16V4000 M 90 B BANK Heat Exchangers Charge Air Coolers Intercoolers 2930-12-378-7720 5260981120
new
JENBACHER TYPE 4 Heat Exchangers Charge Air Coolers Intercoolers J414 / J416 / J420 PNo:1202340
new
GUSCOR HGM560 / SFGLD560 Heat Exchangers Charge Air Coolers Intercoolers Part Number 7673532