air compressor 132 used for sale

SCREW COMPRESSOR ALUP LARGO 26 26Kw 2017 ALUP LARGO 26 CE screw compressor after service Specifications: capacity:4.02 m3/min; 26KW motor; pressure max. 10bar; process; 4951h; Year; 2017 compressor fully operational, net price: 22500 PLN gross price: 27675PLN

Abegg to fan and the fan with fans Ziehl. noch nie benutzt NEW

Vacuum pump, airframe pump, rotary vane pump ALCATEL type 100-132 Fabr. No. 173082 - 3101 Year of construction: approx. 1995 Volume flow: approx. 50 m3/h Negative pressure: 0.5 mbar (indicated on the type plate)Negative pressure: - 0.9 bar (determined during test run) Motor power: 3 kW Motor speed: 1420 rpm. Mains connection: 400 Volt, 50 Hz - Oil-lubricated rotary vane pump Dimensions L x W x H: 700 x 420 x 310 mm Weight: 78 kg good condition; used

Max. 12 bar, 110 m3/min, year 2001.

Stock number U1984-2 Used impact dryer for pellet by RIETER (Germany) model AERO 500 in stainless steel design (material 1.4541, AISI 321). Dryer is equipped with air blower providing 90 m3/min and driven by electric motor with power 18.5 kW. Dryer has reported output 4000 kg/h of outgoing product. Flow rate of water with pellet: 35 m3/h (maximal), 25 m3/h (nominal) and 20 m3/h (minimal). Nowadays machine has installed screens with mesh 1.2 mm. Machine new 1997. Shipping dimensions of dryer: width 1400 mm x length 3830 mm x height 2265 mm. Weight of machine – 700 kg. Body of drying chamber is sound-muffled. Technical documentation included in german language. Machine had been working on PP pellet.

11.80 kW, max. 10.5 bar, 56.50 m3/min.

14.5 bar, 22.80 m3/min, refrigerant R 404a.

14.5 bar, 43.50 m3/min, refrigerant R 404a.

max. 14,5 bar, 43,50 m3/min, Refrigerant R 404a.

max. 16.0 bar, 46.67 m3 rpm. Caeltemittel R 404a

SOMOS plastic dry-air-dryer for D200 with voltage regulator 230V Dry air flow rate: 200 m3/h Heating capacity dry air: 8.1 kW Regeneration heating capacity: 8.1 kW Drive capacity: 0.9 kW Connected Waterberg days: 17.1 kW Completely overhauled with 1 year guarantee Drying hopper, vacuum conveying system and package spare parts can be offered on demand.

max. 16.0 bar, 65.0 m3/min. caelte agent R 404a.

max. 16,0 bar, 65,0 m3/min. Refrigerant R 404a.

max. 10.50 bar, 99.80 m3/min, caelte agent R 404a, water-covered.

max. 10,50 bar, 99,80 m3/min, Refrigerant R 404a, water cooled.

Water cooler, ruck cooler GEA, 400-600KW.with radial fan, suitable for air duct as heating or to blow into the open.

Material: steel Engine 11 kW Very good condition. You can also get the entire system with all components.

Material: Steel Engine: 37 kW Weight: 1,700 kg diameters: 10-60 (mikron) task: kg/h 1200-5000 Speed: max. min 1 2250 This machine is overhauled and like new. You can also get the entire system with all components.

Compressed air refrigeration dryer Kaeser TH 451 16.00 bar, 45.00 m3/min.

Compressed air refrigerant dryer Kaeser TH 451 16,00 bar, 45,00 m3/min.

Compressed air refrigeration dryer Atlas Copco FD 1000 VSD A 13 bar, 60 m3/min. Frequency controlled, volume flow 0-60 m3/min.

Compressed air refrigerant dryer Atlas Copco FD 1000 VSD A 13 bar, 60 m3/min. Variable speed drive. Volume flow 0-60 m3/min.

Compressed air refrigeration dryer Atlas Copco FD 1250 VSD A 13 bar, 75 m3/min. Frequency controlled, volume flow 0-75 m3/min.

Compressed air refrigerant dryer Atlas Copco FD 1250 VSD A 13 bar, 75 m3/min. Variable speed drive. Volume flow 0-75 m3/min.

Air pressure-done piston pump aerial entrance pressure max. 8 cash Max Materialvolumenstrom Materialvolumenstrom materialvolumenstrom 4.5 l / min. translation 30:1 224 cash material temperature max. 90°C high-grade steel execution (changes and mistakes in the technical data, information and prices as well as intersales reserve!)

Compressed air refrigeration dryer Hiross PG 0900 12 bar, 90 m3/min.

Compressed air refrigerant dryer Hiross PG 0900 12 bar, 90 m3/min.

Air-cooled liquefaction kit Bitzer without compressor,Type LH135/F302H, New, Base plate with condenser and collector

Air-cooled condensing kit without compressor, Bitzer, type LH124/F302H, new, base plate with condenser and collector.

Blacksmith hammer / air hammer Zeva machines 16 bear Air / forging hammer 16 bear Max 250 strokes/min Working cylinder diameter 90 mm Stroke approx. 170 mm CLOUT approx. 16 bear Anvil is connected to machine Ambosswerzeug can be changed CLOUT and Geschwindegkeit can be controlled with foot switch and hand 1.5 KW, 250 kg If you are interested in air hammers with 25Baer, 40Baer, 55Baer and 75Baer write me a short message!

Air dryer Mobile for 17-24 Nqm/h 219W.

Dynamic airflow separator (sifter) for minerals, cement, recycling etc., rotor diameter: 700 mm, turbine wheel occupied with 64 blades / turbine blades, outer ring occupied with 36 manually adjustable counter wings, incl. drive. In very good condition.

Compressed air refrigerant dryer Atlas Copco FD 1600 FS 13.00 bar, 96.00 m3/min, Refrigerant R 404a

Static distribution, model: CLASSICLON, feeding size: 4-5 mm, end product: up to 150 µm, capacity: approx. 30-40 t/h, ideal for producing filler sand

Dynamic separator, model: CLASSICLON, E-drive 11 kW, ideal for producing filler sand; less use

Full stainless steel heat exchanger in round shape. Previous use: heating air with steam. Suitable for heating or cooling aggressive gases/air.

Mobile pumping station w / air driven pump and 2 "camlock couplings and flushing. Build in PE plastic.

Air tanks 5000 L 11 Bar

Used compressed air container storage facility, in top condition Compressed air system fully installed in a 20 ft steel container, 2 x Boge VLEX screw compressors with 65 KW (overhauled a year ago, new screw elements, engines newly stored, new shooter and completely new compressor control, with overarching control. Delivery quantity at maximum maximum maximum press 10 bar 2 x 9 m ³/min, free to control with 2 x 9 m ³ or together 18 m ³/min. In addition, in the container is a built-in container with 500 lite, a cyclone separator, Beko cold dryer type. RA, and compressed air filter 2 fold, Mirco filter and activated carbon filter, condensate treatment is done via an oil water separator. The too and exhaust air are discharged via ventilation ducts, and can be sealed with electrically motor locking flaps. Container includes 4 electric heaters (thermostat controlled), and an electric sub ...

Make : Wolf Type: WLE-S-180 Built: 1993 Dimensions: 1.3 m x 2.2 m x 2.6 m (approx. WxLxH) Heating unit: 209 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 14,000 m3/h; 7.5 kW; 1435 rpm Location : Camp Herzogenaurach Sales price: € 2,990,- net, from location This plant is already on sale, similar we have in stock. We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please contact us, tel. 0171-9508841.

All prices are from Station Germany. All follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are owner, manufacturer or operator information and therefore non-binding for us. Customer protection is agreed between the parties. Place of jurisdiction Germany. All agreements are made in accordance with German law. Customer protection agreed after ICC Paris Intermediate sale, other use, exploitation and error are expressly reserved.

All prices are from Station Germany. All follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are owner, manufacturer or operator information and therefore non-binding for us. Customer protection is agreed between the parties. Place of jurisdiction Germany. All agreements are made in accordance with German law. Customer protection agreed after ICC Paris Intermediate sale, other use, exploitation and error are expressly reserved.

Labotek Dry-air-dryer type DCD1200 with microprocessed control, 7 hoppers each 200l and conveyor Labotek con-Evator Type PGT4 Dry air flow rate: 1200 m3/h Capacity: 28 kW, 50 A completely overhauled with 1 year guarantee

SOMOS Dry-air-dryer R70 with 3 x hopper 200l, GFK with front door with sight glass, 2 x heating, automatic air Regulation, return air cooler, mobile. microprocessor control Dry air flow rate: 70 m3/h Heating capacity dry air: 6 kW Heating capacity Regeneration: 6 kW Drive capacity: 0,6 kW Connected wattage: 6,6 kW Completely overhauled with 1 year guarantee Vacuum conveying System and spare parts package can be offered on demand.

Air starter Part no. 218006

Ready to ship

Cover for charge air cooler MWM 620 RECON Part number: 1214 1951 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

RECON Part number: 1203-1208 / 1213 6626 / 1230 6642 / 1213 6625 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

RECON Part number: 1203-1212 / 1213 6618 / 1230 6640 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us