ah used for sale

material width:320 mm coil weight:2,6 t material thickness:0,5 - 2,0 mm coil internal diameter:400 - 510 mm coil external diameter:1200 mm no. of straightening rolls:7 straightening roll diameter:50 mm number of draw-in rolls:2 band speed:0 - 30 m/min power capacity:1,5 kW weight:1,5 t

Description: AHT MIAMI FREEZER 185 Model: MIAMI 185 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 1770/1850 mm Depth (inside / outside): 830/990 mm Height (front/external access): 770/830 mm Volume (net): 650 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami is tested but NOT REFURBISHED

Inv. Num. : 7287 Type: KGS- 250 AHD Producer: KENT Created: 2001 Parameters: Work table length: 540 mm Work table width: 260 mm Machine weight: 1300 kg

P409 - used approx. 25 m³ / 25,000 litres HDPE tank, plastic tank, double-walled, flat bottom tank. technical details: capacity: approx. 25 m³ / 25,000 litres material: HDPE tank, plastic tank manufacturer: Formoplast specific weight: min. 1.55 kg/L dimensions: approx. Ø 3.49 m × H total 4.50 m test mark: PA-VI 321.103, DIBT and media list available, AHL/ASL listed Miscellaneous: Used HDPE tank in good condition, cleaned inside, uncleaned on the outside. Above-ground storage tank for outdoor use, standing on a flat floor, double-walled, lid on top of the roof, several inlets and outlets. Only the tank itself is being sold, without attachments such as pipes, fittings and accessories. This container can be used as a storage tank for many different media. Former tank for 40% ironIIIChloride, DIBT and media list available. Sulfuric acid tank, hydrochloric acid tank, bleach ...

Loading aid AHLBORN, type: Liftmatic for double width - Up and down movement automatically - 6 seconds from bottom to top - Manual loading - Condition: Very good - Speed: 15 cm/sec

P427 - used approx. 30 m³ / 30,000 litre HDPE tank, plastic tank, double-walled, flat-bottom tank. Technical details: Content: approx. 30 m³ / 30,000 litres Material: HDPE tank, plastic tank Manufacturer: Formoplast Specific gravity: min. 1.55 kg/L Dimensions: approx. Ø 3.49 m × H total approx. 5.50 m Certification mark: PA-VI 321.103, AHL/ASL listed Other: Used HDPE tank in good condition, inside professionally cleaned, from the outside as shown in the pictures. Above-ground storage tank for outdoor installation, standing on flat floor, double-walled with outer tub, dome on top of the roof, several inlets and outlets, opaque, incl. railing on top of the roof. Only the pure tank is sold, without add-on parts such as pipes, fittings and accessories. If the ladder fits on the truck, it can be supplied. This container can be used as a storage tank for many different media ...

Construction site price: approx. 9,000 pieces open fronted storage stacking boxes, metal, similar type: 14/7-2, approx. 50 x 30 x 20cm, with support rod - used - : Price (net) per piece from location: Price for complete acceptance: 9.-€ (net) / piece. For purchase of 10 pallets of 40 pieces: only 15.-€ (net) / piece On acceptance 33 pallets (truck full) of 40 pieces each = 1,320 pieces: only 12.-€ (net) / piece For purchase of 66 pallets of 40 pieces: 10.-€ (net) / piece Manufacturer: unknown, Type: similar to SSI Schaefer 14/7-2 l (for painted) Dimensions: 50cm deep x 31cm wide x 20cm high Dimensions inside: approx. length: 450 x width 300 x height 190mm Quantity: approx. 9,000 pieces Green With support rod Material: Sheet steel Load: Single: approx. 120kg Stack: 1.200kg Content: approx. 26L Weight: approx. 4kg Current inventory; approx. 70  ...

sheet width: 2100 mm plate thickness: 40 mm pre-bending: 30 mm upper roll diameter: 390 mm lower roll diameter: 360 mm side roll diameter: 300 mm total power requirement: 22 kW machine weight ab.: 17200 kg Overall size: 5060 x 2200 x 2180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Flake ice maker from AHT with pantry - Coolant R 404A 0.290kg - 220-240V - 50 Hz - 650 watts

sheet width: 400 mm coil outside dia.: 1200 mm weight max. in kg: 1500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tube heaters Manufacturer: Ahrens & Bode Pressure-resistant up to 25 bar

: 100 mm roll diameter: 315 mm bending speed: 5 m/min bending capacity - flat iron: max. 12 x 20 mm : 75 mm Drive: 11 kW weight: 2.600 kg range L-W-H: 1950x1600x2100 mm Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used AHT Lisboa wall-mounted refrigerated cabinet made of high-quality steel/glass with sliding doors. Temperature 0 to +2 degrees. LED interior lighting. Dimensions: L 210 or 250cm, D 109cm, H 166cm. The Lisboa wall-mounted refrigerated cabinet is the perfect solution for your sales floor: excellent cooling performance, energy-efficient operation and a modern, attractive design ensure that your products are always fresh, attractive and optimally presented. Thanks to flexible shelves, intuitive operation and durable materials, the Lisboa model adapts to your needs and impresses with its reliability. Ideal for supermarkets, restaurants and convenience stores – increase customer satisfaction with this high-performance wall-mounted refrigerated cabinet! Specifications • Length: 210 cm or 250 cm • Depth: 109 cm • Height: 166 cm • 2 rows of shelves plus lower shelf •  ...

200 litre stainless steel tank Manufacturer : Ahrens & Bode Pressure vessel Content: 200 litres Technical specifications : cylindrical stainless steel container on feet, single-walled Conical spout Operating pressure up to 5 bar Metrics: ca. Diameter: 360 mm, diameter lid 500 mm, cone 400 mm Cylindrical height: 1,840 mm Enema: 3x DN 50 Discharge: DN 65 Documents: Nameplate

Second-Hand Butter Production and Packaging Machinery Complete butter production and packaging equipment suitable for industrial dairy processing. The system includes a continuous butter machine, forming and filling equipment, and packaging units, providing an efficient solution for butter production and portion packaging. General Information - Year of Manufacturing: 2008 - Condition: Good used condition - Continuous Butter Machine - High-performance continuous butter production unit designed for reliable processing in dairy plants. - Manufacturer: AHLBORN - Model: 311/1000 - Capacity: 1000 kg/hr Maintenance History - Gear system completely revised in 2018 – hardened gears installed - Exit stars completely replaced in 2020 Output Configuration - Exit tube: 250 g - Exit tube: 25 blocks Rotary Forming and Filling Machine - Automated system for butter portion fo ...

sheet width: 3100 mm plate thickness: 40 mm pre-bending: 32 diameter of upper rolls: 460 mm diameter of lower rolls: 420 mm side roll diameter: 360 mm power capacity: 30 kW min. bending diameter: 1380 mm weight of the machine ca.: 30,1 t dimensions of the machine ca.: 6,3 x 2,3 x 2,6 m 4 Rolls Hydraulic Bending Machine Standard Features: - hardened and polished rolls - complete body made of ST-52 steel - hydraulically opened/closed drop end controlled from control panel - digital readout for side rolls - top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls vertical movements are hydraulic powered - separate control panel - oil cooler - conic bending - in accordance to CE-norm - Warranty 12 months Optional Accessories: - variable speed of rotation (5.858,00 Euro) - material feeding table (5.100,00 Euro) - center support (18.750,00 Euro) - 2 x side supports (15.000,00 Eur ...

sheet width: 3100 mm plate thickness: 50 mm pre-bending: 40 mm total power requirement: kW weight of the machine ca.: 40 t dimensions of the machine ca.: 6,7 x 3,0 x 3,0 m 4-ROLL Hydraulic Plate Rolling Machine Working length 3100 mm Maximum thickness Pre-bending 40 mm Bending 50 mm Yield Point: 240 N/mm2 Number of rolls 4 Motor Power 55 kW Min. diameter mm - Ø Top Roll Diameter x 3 Top roll Ø 540 mm Bottom roll Ø 510 mm Side roll Ø 440 mm Length 6700 mm Height 3000 mm Width 3000 mm Weight 40.000 kg With: Cone bending device Induction hardened rolls Digital readout for side rolls Fully welded steel (St-52) frame Separate moveable control panel Dual bending speeds Electronic Parallelism All rolls are mounted in spherical roller bearings Hydraulically opened/closed drop end controlled from control panel Activation of cone rolling function and position adjustment via buttons on the  ...

for sale is an Inter HST 165 - machine for applying hot melt glue and tear thread, built in 2018, Subject to prior sale, changes and errors!

sheet width: 3100 mm plate thickness: 16,0 mm ST pre-bending: 20,0 mm ST diameter of upper rolls: 360 mm side roll diameter: 250 mm diameter of lower rolls: 330 mm total power requirement: 15,0 kW weight of the machine ca.: 13.200 kg. dimensions of the machine ca.: 5542 x 2100 x 1983 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual The data for this ad was created with Mod ...

sheet width: 4100 mm plate thickness: 13,0 mm ST pre-bending: 10,0 mm ST diameter of upper rolls: 360 mm side roll diameter: 250 mm diameter of lower rolls: 330 mm total power requirement: 11,0 kW weight of the machine ca.: 16.000 kg. dimensions of the machine ca.: 6542 x 1677 x 1900 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual The data for this ad was created with Mod ...

sheet width: 3100 mm plate thickness: 8,0 mm ST pre-bending: 6,0 mm ST diameter of upper rolls: 230 mm side roll diameter: 210 mm diameter of lower rolls: 190 mm total power requirement: 7,5 kW weight of the machine ca.: 6.020 kg. dimensions of the machine ca.: 5142 x 1390 x 1300 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual The data for this ad was created with ModulMW ...

sheet width: 4100 mm plate thickness: 8,0 mm ST pre-bending: 6,0 mm ST diameter of upper rolls: 300 mm side roll diameter: 210 mm diameter of lower rolls: 270 mm total power requirement: 7,5 kW weight of the machine ca.: 9.930 kg. dimensions of the machine ca.: 6532 x 1730 x 1489 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual The data for this ad was created with ModulMW ...

sheet width: 2600 mm plate thickness: 10,0 mm pre-bending: 8,0 mm diameter of upper rolls: 230 mm side roll diameter: 190 mm diameter of lower rolls: 210 mm total power requirement: 7,5 kW weight of the machine ca.: 5.560 kg. range L-W-H: 4.650x1.380x1.300 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual The data for this ad was created with ModulMWS - the software solutio ...

sheet width: 2100 mm plate thickness: 8,0 mm ST pre-bending: 6,0 mm ST diameter of upper rolls: 190 mm side roll diameter: 150 mm diameter of lower rolls: 170 mm total power requirement: 3,0 kW weight of the machine ca.: 3.290 kg. dimensions of the machine ca.: 4042 x 1380 x 1254 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual The data for this ad was created with ModulMW ...

sheet width: 1600 mm plate thickness: 15,0 mm ST pre-bending: 13,0 mm ST diameter of upper rolls: 230 mm side roll diameter: 210 mm diameter of lower rolls: 190 mm total power requirement: 7,5 kW weight of the machine ca.: 4225 kg. dimensions of the machine ca.: 4000 x 1300 x 1440 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual The data for this ad was created with ModulM ...

sheet width: 3100 mm plate thickness: 13,0 mm pre-bending: 10,0 mm diameter of upper rolls: 300 mm side roll diameter: 210 mm diameter of lower rolls: 270 mm total power requirement: 11,0 kW Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stroke: 135mm, max. sheet thickness: 20mm, max. bending length: 3050mm, pressing force: 80t, max. operating pressure: 2975psi, max. die opening: 250mm, bending angle range: 1°-42°, oil capacity: 150L, max. tool weight upper/lower: 40kg/115kg. Machine dimensions X/Y/Z: approx. 4000mm/2050mm/2450mm, weight: approx. 6000kg. Documentation available. An on-site inspection is possible.

Wall-mounted refrigerated cabinet, convection cooling Used device built in 2015 with 2 doors with 4 shelves 120 x 75cm Temperature range approx. +2 to +8°C, ready to plug in Digital temperature display Automatic defrost Automatic condensation Consumption: 4.7KW/24h External dimensions approx. 140 x 75 H 207cm LED lighting

Properties Total height 4900 mm Depth 4000 mm Width 5200 mm Manufacturer GEA/ Tds Ahaus Type 1500 Machinery No. 36001027.15.1 Year of construction 2003 Description CIP Appendix No.6 Tank volume and dimensions: CIP Tank 1 Volume: 5,500 litres Length: 1,400 mm Width: 1,050 mm Height: 3,800 mm CIP Tank 2 Volume: 5,500 litres Length: 1,400 mm Width: 1,050 mm Height: 3,800 mm CIP Tank 3 Volume: 1,000 litres Length: 1,100 mm Width: 900 mm Height: 1,000 mm CIP Tank 4 Volume: 1,900 litres Length: 1,100 mm Width: 900 mm Height: 1,950 mm

Load capacity: max. 1,500 kg. Wire gauge range; 0.5 - 6.0 mm Coil diameter: max. 1,000 mm Speed: 0 - 80 rpm,

Load capacity: max. 1,500 kg. Wire thickness range: 0.5 - 9.0 mm Waistband-outer diameter. max. 1,000 mm Waistband-inner diameter. min. 300 mm Speed: 0 - 80 rpm

Manufacturer: Alpha Pack Model: AHP-450-3S SSC Year of Manufacture: 2021 Type of Machine : Wrapping Machine Electrical Specifications: Voltage: 380 VAC Phase: 3P + N + PE Power Rating: 2.5 kW Find more here - / Contact us at -

This AMT AHDR 500/1600 was manufactured in 2018. It features a coil diameter of 1600 mm and a spreading range of 250–650 mm, powered by dual 0.75 kW reel drives. With a total weight of 1200 kg and a through height of 1200 mm, its in excellent, like-new condition with zero operating hours. Contact us for more information about this machine.

AHI Grain Cutter Size 3, 600 mm roller length, Power 4 kw, rollers ø 147,4 Milled grinding segment Test run carried out in our specialist workshop

Key data: 510 mm, 3000 mm, 4 St.

HOFMANN AHW 500 YOC 1991 Motor power: 4.0 kW Rated current: 9.5 A Max. planing width: 510 mm TERSA knife shaft (4-knife shaft) Integrated auxiliary stop SUVAMATIC knife shaft protection Joining strip with fastening rail Table length: 300 cm Table height: 84 cm Suction nozzle: 140 mm 4 pcs new knives Drive belt renewed The electrical system was renewed by the previous owner The machine does not have an engine brake. Transport dimensions (approx. dimensions): L: 312 cm W: 140 cm H: 115 cm Weight approx. 900 kg

material width: 0400 mm coil weight: 1,50 t material thickness: mm nomb. of straightening rolls: 9 diam. of the rolls ca.: 30 mm range of expansion ca.: 460 - 530 mm coil outside - diam. ca.: 1500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø with groove -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Number: 8 recordings available -Price: per piece -Dimensions: 270/95/H95 mm -Weight: 3.2 kg/piece

Complete Milk and Cream pasteurisation line with separator, homogeniser and CIP tanks, with an input capacity of 12.000 liter per hour. Line still located in the dairy plant in Germany., Milk pasteurisation unit:, - Open level tank., - Product pump., - Plate Heat Exchanger, 4-sections, GEA Ahlborn, VT 40 BC-6, year 1981, volume 194 liter, 6 bar., - Overpressure system with boosterpump to get more pressure on the raw milk side compare to the pasteurised milk side., - Flow diversion valves which opens in case the pasteurisation temperature is not reached., - Holding 20 seconds., - Indirect hotwater circuit (steam - water) with steam valves, SWEP brased plate heat exchanger and circulation pump., - Icewater circuit with ice water valves., - Temperature cylce: 7° (in) - regeneration - 56 °C (separator / homogeniser) - 74 °C (pasteurisation) - holding (20 seconds) - regeneration - 4 °C (o ...

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø with groove -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Number: 28 recordings available -Price: per piece -Dimensions: 270/95/H95 mm -Weight: 3.2 kg/piece

Pipe reciprocating saw, pipe jigsaw, beam jigsaw, reciprocating saw, guide holder, pipe clamp -Manufacturer: Fein, holder for pipe reciprocating saw type AST 663 or similar -Clamping: with lashing strap -Number: 2x holders available -Price: per piece -Box dimensions: 390/310/H425 mm -Weight: 25 kg/piece

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Manufacturer: Rexroth, hydraulic power unit, hydraulic station -Type: Rexroth AHAG -Pressure: 250 bar -Flow rate: 42 l/min / 2 working circuits -Motor: ABB 11 kW / 1455 rpm -Hydraulic reservoir: Tank capacity 160 l with level indicator -Return filter: RFBNHC 330F10 A1.X -Pressure reservoir: Hydac, capacity 10 l -Individual components: see photos -Dimensions: 1340/680/H1500 mm -Weight: 484 kg

Several Wafios wire processing machines with two payoffs are available. 1) Wafios N90, year of manufacture: 2003. Including payoff Wafios AHL 41 D-M, year of manufacture: 2002. 2) Wafios DS 80. 3) Wafios N6. 4) Wafios N5. 5) Wafios N4. 6) Wafios N4. 7) Wafios payoff AHL 41 DR, year of manufacture: 1998. 8) Wafios payoff AHL 41 D, year of manufacture: 1997. All machines including payoff. An on-site inspection is possible. Individual sale possible.

Tip width: 1200mm; Copy device: Yes; Motor power: 1.5kW; Speed: 870 / 1400 / 2100 rpm; Lots of accessories available!

Working width: 410 mm; Planing shaft: Tersa knife; Number of knives: 4; dressing table length: 2800 mm; Adjustment dressing table: hydraulic / foot pedal; Hollow and pointed joint adjustment: yes; Display Spahn acceptance: Digital display; Display hollow and pointed joint: Scala; Dressing stop angle adjustable: yes; Motor power: 4 kW; Machine length: 3000 mm; Machine width: 900mm; Weight: 900 kg;

Offer 23351 Technical data: - max. Load capacity 750 kg - Face plate diameter 700 mm - min. table height in horizontal position approx. 750 mm - Max. table height in horizontal position approx. 1390 mm - Working height in 3 steps manually height-adjustable - Face plate mot .rotatable + swivel or tiltable - Rotary movement electr. infinitely variable approx. 0.01 - 2.0 rpm - Right + Counterclockwise - Welding current transmission approx. 700 A - Drive 400 V - Connected load 1.5 kW - Handheld remote control for direction of rotation, swivel or tilt - E. footswitch - Space requirement approx. W 1500 x H 750 x D 800 mm - Weight approx. 500 kg

Offer 23353 Hydr. Welding Rotary and Tilting Table - Three Axis - Welding Manipulator Technical data: - max. Load capacity 750 kg - Face plate diameter 700 mm - min. table height in horizontal position approx. 750 mm - Max. table height in horizontal position approx. 1390 mm - Working height in 3 steps manually height-adjustable - Face plate mot .rotatable + swivel or tiltable - Rotary movement electr. infinitely variable approx. 0.01 - 2.0 rpm - Right + Counterclockwise - Welding current transmission approx. 700 A - Drive 400 V - Connected load 1.5 kW - Handheld remote control for direction of rotation, swivel or tilt - E. footswitch - Space requirement approx. W 1500 x H 750 x D 900 mm - Weight approx. 700 kg

CONTROLS   PLC SIEMENS S7 300 FEEDSTOCK TUBE   external diameter min.: 20 mm   external diameter max.: 70 mm   wall thickness min.: 1 mm   wall thickness max.: 6.5 mm MACHINE CHARACTERISTICS SWAGING   force: 630 kN   stroke rate (max.): 630 /min ELECTRICAL SPECIFICATIONS   total power consumption: 40 kW Tube pointing machine HAGINGER AHM 63 with slide feeder S - Material: Steel tubes with a strength of 800 N/sqmm - Max. forming force: 4 x 630 kN - Drive motor power: 30 kW

DECOILER   design: twin reel   coil weight max.: 0.5 to   max. diameter of coil: 1600 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 1500 mm   space requirements -front/back-: 2100 mm   total height: 2200 mm   total weight approx.: 1570 kg - Double reel - Load capacity 1600 kg - Spreading range 270 - 550 mm - max. sheet width 150 mm - 3 pressure arms - Speed approx. 20 m/min

Steam Boiler CHP Power Plant with 240 MW Pyroflow CFB Boiler A combined heat and power (CHP) plant in very good condition, with an electrical capacity of 88 MVA and a thermal capacity of 240 MW. The plant is designed to operate primarily on wood-based biomass, with coal as a backup fuel. This is a complete power plant, still in full operation, and includes all technical systems from fuel feeding to the dispatch of electricity and live steam. The equipment has been exceptionally well maintained and extensively upgraded throughout its lifetime, meeting the most stringent modern quality standards. The steam boiler utilises Circulating Fluidised Bed (CFB) technology with the commercial-type PYROFLOW, manufactured in Finland by Ahlström in 1989. This CFB boiler delivers a steam flow of 100 kg/second at a pressure of 137 bar and a temperature of 535ºC. The primary fuel has been wood-ba ...

A stainless steel pressure tank housed in a shipping container, fitted with various equipment for dispensing drinks., Additional title: Stainless steel pressure tank housed in a shipping container, Capacity: 3200 l, Operating pressure: 2,5 bar, Operating temperature: 20 °C, Length: 4,65 m, Width: 2,3 m, Height: 1,95 m, Weight: 2500 kg, Features: Beer pump, thermometer, gas measurement, flow meter (Diessel), 2 cable drums, hose reel, safety valve, cleaning and filling connection, spray head, manometer, empty detection electrode Control cabinet, compressed air compressor (AltasCopco), pallet for 4 CO2 bottles, valves, pressure reducer