agie cut used for sale

Thread cutting dies, replacement thread cutting dies, thread cutting head with Strehler dies, thread cutting die, thread cutting machine, pipe thread cutter -Manufacturer: Ridgid, Thread cutting die set, unused, original packaging -Type: 3/4 BSPT -Number: 2 sets available -Price: per set -Weight: 0.1 kg/set

Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head -Manufacturer: Ridgid, Thread cutting head model 811A 1/8 to 2 inch -Pipe size: 1/8 to 2 -Bolts: 1/4 to 2 -Dimensions: 260/240/H70 mm -Weight: 5.6 kg

Flame cutting machine, torch, oxy-fuel cutting machine -Shaft diameter: 28mm - Shaft length: 200mm - Rack length: 140 mm -Total length: 320mm -Socket diameter: 42 mm -Weight: 2 kg

Key data: 500 , 350 , 300

Travel X 500 / Y 350 / Z 300, Water bath machine, automatic wire threading, incl. 20 KG option incl. cooler

Spare parts for smooth cutting head board Baader 424 / 429 (Straight Cut Heading Machine Baader 424 / 429). Almost all spare parts are available in stock or at short notice.

Shell end milling cutters, milling cutters, milling cutters, shell milling cutters -Manufacturer: WMW, shell milling cutter, milling cutter type N 9960 -Size: 160x63x50mm -Receptacle: Ø 50 mm -Dimensions of box: 175/175/H100 mm -Weight: 5.9 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Tapping chuck: MK3 mount -Type: PH3/3 -Square: 7 x 7 mm -Bore: Ø 9 mm -Dimensions: Ø 80 x 225 mm -Weight: 3.0 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW ABW, tapping chuck holder MK3 -Type: GB3 -Bore: Ø 24 mm -Dimensions: Ø 80 x 264 mm -Weight: 3.7 kg

Thread cutting chuck, thread chuck, tap chuck, thread cutting apparatus -Tapping chuck: thread cutting attachment -Cutting performance: -Recording: MK3 -Bore: Ø 23 mm -Quantity: 2x thread cutting chucks available -Price per piece -Dimensions: Ø 110 x 325 mm -Weight: 8,0 kg/pc.

RMH G 25 New Manufacturer: RMH Roller cutting width: 1200mm Roller cutting height: 1300mm Dimensions ( L x W x H ): 2200 x 1300 x 2500 mm Drive: 11 KW Manual working procedure Two-handed operating system Cutting force: 25 tons (1x cylinder) Total weight: 3600kg

Huller thread cutting machine vith hydraulic vice. Thread head from M3 up to M27 Machine is perfect for serial work.

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, tapping chuck holder MK2 -Type: A2 MK2 -Bore: Ø 12 mm -Dimensions: Ø 70 x 267 mm -Weight: 3.3 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, tapping chuck holder MK2 -Type: A2 MK2 -Bore: Ø 13 mm -Dimensions: Ø 70 x 267 mm -Weight: 3.3 kg

Yarn cutter, hand cutter, spinning tube cutter, hand cutter for spinning tubes -Manufacturer: Timmer, hand-held yarn cutter -Type:HSG-TG 6 -Cutting length: max. 235 mm -Use: for all common yarn carriers -Accessories: with operating instructions -Dimensions: 1060/510/H370mm -Weight: 74 kg

Stock - No. 2537 1 used,, functionally tested cutting mill/granulator Manufacturer: Alpine Hosokawa Type: RO 50 / 80 Built: 1993 Material feeding hopper: 500 x 840 mm Opening hydraulic Rotor diameter 500 mm x width 800 mm Rotor semi-open, 4 rotor V-cut - 2 Fixed blades Drive 55 kW Sieve diameter 10 mm Blower and Cyclone Throughput up to approx. 800 kg/h depending Material Machine is ready for demonstration from the Wuppertal plant, Date by appointment More granulators from stock ready to show, Ask for our current stock list or visit : plasticotrading

Window rubber, cutting machine, seal cutter, pneumatic slat cutter, cutting device, pneumatic cutting device, pneumatic press -Manufacturer: Benzing, pneumatic cutting device -Stroke: adjustable, max. 70 mm -Individual components: see photos -Dimensions: 150/130/H450 mm -Weight: 9.3 kg

Automatic program Safety guard 2 x standard L knives length 320 mm 1 other tool Machine complete in working conditions, sold as is.

Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus -Manufacturer: WMW ABW, thread quick-change chuck SK40 Ovp -Type: WFLK2/ISO40 M16 Ø12X 9 -Dimensions: Ø 62 x 192 mm -Weight: 2.0 kg

Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment, thread cutting quick-change chuck -Tapping chuck: Tapping quick-change chuck -Type: M12 Ø9X 7 -Total dimensions: Ø50 x 71 mm -Weight: 0.5 kg

Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus -Manufacturer: Tapmatic, thread cutting device -Type: SK40 mount -Dimensions: Ø 63 x 158 mm -Weight: 0.8 kg

Thread cutting chuck, thread chuck, tapping chuck, thread cutting apparatus -Thread cutting chuck: Thread cutting device 3 pieces -Recording: MK3 -Bore: 2x Ø16 mm / 1x Ø14 mm -Delivery/Price: complete -Transport dimensions: 280/190/H88 mm -Weight: 9.7 kg

3000 x 1500mm 3000w

Automatic optimization crosscut saw: Technical data: Follow later!

3000w IPG 3000 x 1500mm

Inlet: 1200 x 950 mm Rotor width: 1200 Rotor diameter: 800 Stator knife: 4 Rotor blade: 7 x 4

Thread cutting chuck, thread chuck, tapping chuck, thread cutting apparatus -Thread cutting chuck: Thread cutting device 2 pieces -Recording: MK2 -Bore: 1x Ø14 mm / 1x Ø10 mm -Delivery/Price: complete -Transport dimensions: 163/87/H260 mm -Weight: 6.1 kg

thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: WMW ABW, thread cutting chuck holder MK2 2 pieces -Type: GB2a -Bore: 1x Ø8 mm / 1x Ø5 mm -Delivery/Price: complete -Transport dimensions: 220/130/H63 mm -Weight: 3.0 kg

Wabäma WSG CLASSIC 460/11 Bread cutting machine / Bread gate 10mm Y.O.M. 1999 Condition: Used as available Manufacturer Wabäma GmbH Model: WSG Classic 460.11 230 V / 3.4 A /0.75 kW Weight: approx. 175 kg Dimensions: approx. 62 x 68 x 128 cm Visit possible at any time on site.

Cutting mill Manufacturer: NEUE HERBOLD Built: 2001 Drive: 7.5 kW for the grinding of foils: optional with roller feeder type EB 290 (drive 0.75 kW)

strapping machine, packaging machine, strapping device, strapping set, unwinding trolley, strap dispenser, cutting stand, vertical cutting stand -Manufacturer: HAVA, cutting stand cutting device on mobile base frame -Cutting width: up to 1250 mm -Roll diameter up to 850 mm -Dimensions: 1655/730/H1150 mm -Weight: 22 kg

shell end mills, cylindrical milling cutters, milling cutters, disc milling cutters, slot milling cutters -Disc milling cutter: 150 x 15 mm, cross-toothed -Hole: Ø 32 mm -Weight: 1.2 kg/piece

Bread cutting machine Treif Pegasus 2616 -Bread cutting machine without oiling -for long loaves -complete in stainless steel -with sickle knife -Cutting width adjustable from 4 to 14mm -mobile on wheels -Year of construction 2000

Wire EDM machine SODICK A 600 manufactured in 1997. Technical parameters of the SODICK A 600 EDM machine: - table travel (X axis): 600 mm - table travel (Y axis): 400 mm - Z axis travel: 270 mm - maximum dimensions of the processed part (width x depth x height): 800 x 550 x 260 mm - maximum weight of the workpiece: 900 - auxiliary table travel (U axis x V axis): 70 x 70 mm - wire diameter: 0.1 ~ 0.3 mm - maximum wire speed: 250 mm / sec. - wire tension: 0.2 ~ 2.8 kgf - cutting inclination at an angle: + -15 degrees per 100 mm of thickness - height from the floor to the surface of the working table: 1000 mm - machine tool dimensions (width x depth x height): 2188 x 2645 x 2100 mm - machine tool weight: 3700 kg

Cutting LEO with extended inlet belt Pretzel Rolls Baguett - Tailor Table unit made of stainless steel Knife height adjustable for average Band speed adjustable DGUV V3 tested Connection 230/240V, 50 Hz, plug-in Transmission width/height 140/ 90 mm Dimensions (WxDxH) in mm: 1700 x 440 x 470 NEW Machine With warranty Optional: - Driving table for LEO - Cut - Frach kosten

TECHNICAL DATA: Working area 3,000 x 1,500 x 115 mm Control Siemens Sinumerik 840 D Laser power 5,000 watts Max. sheet thickness structural steel 25 mm Max sheet thickness stainless steel 20 mm Max sheet thickness aluminium 12 mm Machine regularly serviced by TRUMPF! Standard: - Closed machine frame with integrated laser unit - TRUMPF laser TLF 5000 - Laser unit: CO2 laser, high-frequency excited, maintenance-free turboradial blower, cooling unit, logbook function - Automatic pallet changer and longitudinal conveyor belt - Drives: Gantry drive in combination with linear direct drives - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Plasma sensor inges, PMS - Automatic sheet metal edge detection - Programmable performance cycles - Microweld - Automatic nozzle cleaning - Fast editing with SprintLas - ContourLas for making small ho ...

Attachment for an excavator Stone barrel, concrete cutter, surface milling machine, drum barrel, attachment cutter, cross-cutting head cutter used O&K Orenstein and Koppel SN1487569 940963 211.22.25.42 Cutter diameter s. 670 mm Width: approx. 1300 mm Tool holder approx. 30 mm Ambauschild approx. 700 x 570 mm Hole size approx. 580 x 420 mm Bore approx. 275 mm Total dimensions: 1400 x 1300 x 670 mm Subject to changes and errors in technical data, information and prices as well as intermediate sale

shell end mills, cylindrical milling cutters, milling cutters, disc milling cutters, slot milling cutters -Disc milling cutter: 125 x 12 mm, cross-toothed -Hole: Ø 32 mm -Quantity: 1x cutter available -Weight: 0.8 kg

thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus -Manufacturer: Alfred H. Schütte, self-opening thread cutting head -Type: SH 1 1/4 -Shaft: Ø 40 x 100 mm -Dimensions: 170/155/H225 mm -Weight: 8.6 kg

ROOT START REDUCER LOG END REDUCER60 m / min for logs with diameter 60 cm - 4 logs / min at roller conveyor feed rate 30 m / min for logs with diameter 60 cm - 3 logs / min Maximum removal 200 mm Max log diameter 700 mm measured 1500 mm measured 1500 mm from the root and length min 3.2 m max 6.2 m Number of cutting tools 30 Cutting tool width 60 mm Cuttin motor 37 kW, 1500 rpm

thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus -Manufacturer: Alfred H. Schütte, self-opening thread cutting head with quick-change turning tool holder -Type: SH 3/4 -Shaft: Ø 40 mm -Dimensions: 265/130/H160 mm -Weight: 7.1 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, corner milling cutter -Manufacturer: Widax-Heinlein, face milling cutter SK50 -Type: M100 239.10.220 Ø80 41005 -Number of teeth: 6 -Dimensions: 95/90/H230 mm -Weight: 4.0 kg

shell end mills, indexable insert mills, porcupine mills, milling tools -Manufacturer: Seco, shell end mills, indexable insert milling cutters SK50 -Type: R 215 16 50 049 058 09 Ø 49 mm -Dimensions: Ø 100 x 230 mm -Weight: 3.6 kg

CUTTING GATE FOR DICER RÜHLE typ SR 1- used Cutting gate sizes to the choice /optional/ : 6 and 24 mm Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT id: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36 abc.inter-wiba.com.pl info@inter-wiba.com.pl

Used only for experiments.

shell end mills, indexable insert mills, porcupine mills, milling tools -Manufacturer: Widax-Heinlein, shell end mills, indexable insert milling cutters SK50 -Type: M30 229.34.800 7 04 09 -Diameter: 61 mm, without inserts -Dimensions: Ø 97 x 235 mm -Weight: 3.8 kg

ring cutting machine, cutting device, cutting pliers, cutting machine, ring, disc, segment and strip cutting machine, ring cutting machine -Manufacturer: Klinger, ring cutting machine -Cutting range: 80 - 1250 mm -Cutting thickness: up to 9 mm -Dimensions total 1100/170/H280 mm -Weight: 6.4 kg

splitting wedge, separating wedge, pressing pliers, hydraulic crimping pliers, cable shears, cable cutter -cable cutters: Split wedge Separating wedge, hydraulic -Intermediate dimension: 95 mm -Wedge length: 100 mm -Number: 3x wedge tools available -Price: per piece -Dimensions: 550/100/H175 mm -Weight: 13.5 kg/piece

Slicer WABÄMA: knives thickness 9 mm, new knives; power 0.5 kW/380V semi-automatic lubrication; automatic adjustment of the height at the upper plate of bread;

Cross-cut saw for strong wood, glue binder, cantilevered wood... Work path approx. 3m , Cutting height approx. 45 cm Circular saw blade 900x50 good condition little worked!

thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus -Manufacturer: Lenze ABW, thread cutting chuck MK2 -Type: GB2a -Dimensions: Ø 62 x 207 mm -Weight: 1.2 kg