af used for sale

Smoke control panel, RZN 4108 K, D+H Mechatronic, mint condition Attention! We have set the lowest price on the market for a comparable used part. Although in mint condition the system is sold as used! The part was bought from a spare parts warehouse of a company, has some stock traces. By means of the cable entries and the closed mounting holes you can see that the system has never been in operation. Likewise, the batteries have never been connected, but it may be that the batteries need to be replaced. Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device does not work within one month after purchase you can return the goods and we will refund the purchase price.

EUROLUX Fruit and vegetable mill with grinding ring Delivery date: approx. 6-8 working weeks/ by appointment Description of the machine: With this mill system it is possible to shred a wide variety of raw materials, adapted to the pressing system and the degree of maturity. The raw material is placed in the funnel of the mill. There is a screw in the hopper that conveys the raw material to the grinder. The raw material is crushed in the grinder and laterally conveyed out of the grinder. Depending on the material to be ground, different knives and grinding rings can be used. You can also change the grinding degree through the speed. If necessary, it is possible to overlay the grinding with inert gas The system can be easily opened and pulled apart for cleaning. The mill is completely assembled and wired on a frame. Two lip seals are installed to seal the grinder on t ...

CANDY RECYCLING AD 2000 made in 2015 for recycling of Rework from hard candy production suitable also for jelly, toffee, lollies, fondant even wrapped products result after recycling: completely transparent and neutral sugar-glucose syrup-water solution consisting of: dissolving machine intermediate/buffer tank, volume 2000 L with platform horizontal rotary drum vacuum filter unit year 2015 very good condition

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Profile Projector ISOMA M 108 A / Suisse manufacturer: ISOMA type: M 108 A mach.-Nr.: 866477 comm.-Nr.: 0202/050/130/0382 stock-Nr.: 1835 + Regular Price: 4.680,- € > Reduced Price: 2.340,- € BN + All prices are shown without taxes (net price) Technical Data (According to manufacturer) screen width: 550 mm screen height: 450 mm object table length: 170 mm object table width: 150 mm travel legth: 40 mm travel width: 15 mm glas table Ø: 85 mm voltage: 220 V / 50 Hz weight: 280 kg standing area: W 1.000 x D 800 x H 1.800 features Screen Size W 550 x H 450 mm object glas table insert vertical sled table micrometer spindle for legth and  ...

Belts - oil separators Oil separator with KUNSTSTOFFGURT OPV - 1 / OPV - 2 This group of oil separators is recommended for industrial applications. The collection in the standard version is made of plastic without connecting traces, which is adapted to the requirements, e.g. polymer, elastomer, etc. All parameters such as performance, bandwidth, and so on are selected individually. An oil lifting height of up to 15 m is particularly useful in deep tanks, e.g. sewage treatment plants. The number after the marking (300/500/700/1000 mm) is the working length of the strip - depth from the mounting base. Complete oil separator with PU polyurethane tape. Belt color: green (standard), blue or white. Maximum liquid temperature up to 60°C. We have oil separators with a stainless steel belt INOX with a working temperature of up to 100 ° C at an additional cost. Maximum liquid temperature ...

UWM WELDING ROTARY TABLE TYPE UWM 3 -Capaciteit of horizon eel 300 kg -Capaciteit vertikaal 150 kg -Panel of afmeting 450 mm -Tpm Omwentelingen 0.2/2 -90 degrees kantelbaar -Voetpedaal -Toerental digital uitlezing -Drieklauw met -Noodstop -Documentatie -230V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Duration / ALB ear power 30/35 mm thread cutting capacity Max M24 (Steigungsabhängig) hand-reversing switch for forward link. Undervoltage, thermal overload protection, spindle MK 3 drilling depth 180 mm throat depth 260 mm column diameter of 110 mm-usable table surface [BxL] 420 x 340 mm speed display scale drilling depth indicator scale drill depth stop with fine adjustment Table height with rack and pinion motor three-phase of 400 V pole changing bar 1,5/2 kW spindle speed continuously 125-2000 1 / min including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Warranty: 3 years delivery: immediately, free delivery loaded: free House including packaging not the right machine? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER .

The oil separator is used to collect oil floating on the surface. It is used wherever there is little working space and fluids must be moved and de-oiled in different places. It is a lightweight, compact portable device that is mounted on the wall of the in which the liquid to be cleaned is located. Thanks to this, it is possible to develop various technological active ingredients in de-oiled in different places. The device is designed for continuous operation. The disc is made of self-adhesive plastic, on which oil and carbohydrates, but water does not. Maximum liquid temperature up to 60 ° C - standard band. Maximum motor and housing temperature up to 40°C. Avoid mounting places with aggressive pH - additional motor protection required. With the OTV-300, you should take a 15-minute break every 3 hours. If the motor does not overheat, it can work longer. Continuous opera ...

Casing-in machine Zechini Model Gamma Year 2000 Working width 420 mm Thickness 100 mm (electrical adjustable) Details After order machine shall be completed with new side dams, new glue bin, and new glue adjustment gears Available Direct

Thread cutting device Freischneiden Setup Drilling depth shut off programmable Drilling depth and speed display - digital Thread cutter M20 (depending on elevation) variable speed of 125-4000 U/mon in two stages, stage change of belt apportionment. Drilling capacity 25/30 mm Spindle MK 3 Drilling depth 125 mm Projection 280 mm Usable surface (pivoting) 420 x 340 mm Feed 0-300 mm / min stepless Table height with rack and pinion Machine dimensions (W x D x H) 520 x 820 x 1900 mm Motor three-phase 400 V pole changing bar 0.9 / 1.45 kW Weight 300 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Option: spindle stop and chip fracture module 690 EUR DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER .

HABUSCH BAND SAW TYPE CY270N -2 Snelheden -Ver STeK -Zaagdruk hydraulic regelbaar -Snelspanklem -Koeling -Afslag automatic -Zaagblad 2480 x 27 x 0,9 mm -Noodstop -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Drilling depth and speed display - digital Thread cutting device M30 (depending on elevation) R1 spindle speed with continuous transmission speed series 100-2000 1 / min R2 spindle speed with continuous transmission speed range 70-1400 1/min Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm Usable surface (pivoting) 590 x 450 mm Feed by hand Table height with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor three-phase 400 V pole changing bar 1,5/3,0 kW Weight 420 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER .

Thread cutting device Freischneiden Setup Drilling depth shut off programmable Drilling depth and speed display - digital Thread cutting device M30 (depending on elevation) R1 spindle speed with continuous transmission speed series 100-2000 1 / min R2 spindle speed with continuous transmission speed range 70-1400 1/min Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm Usable surface (pivoting) 590 x 450 mm Feed 0-300 mm / min stepless Table height with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor three-phase 400 V pole changing bar 1,5/3,0 kW Weight 420 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Option: spindle stop and modulus of rupture of chip 660 EUR DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK  ...

Leybold E250 locking valve vacuum pump is after the general overhaul: absolutely as good as new checked according to the manufacturer's specifications, so that all games and dimensions are in the tolerances equipped with new wear parts Available at short notice includes one year warranty Leybold E250 Rotary Piston Pump pumps wants: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty

Type: Flexon Loading sections (L x W x H): 590x120x200 mm Cutting length: 1,0 – 30,0 mm Saw blades 1 set, 1010 mm Capacity: up to 1800 kg/hour Electric power: 8.0 kW Machine dimension in cm: Width: 145 cm Lenght: 60 cm Height: 115 cm Delivery time: 10 working days after advanced payment

POS 1 Dry pigment titanium white rutile R660 Sachtleben stored dry in 25 kg bags. Ideal for artist colours and paint for transport cost reasons, if possible min 100 kg Small delivery quantities may be after consultation Total quantity available: 625 Kg Pucsvm Other dry pigments: Zinc White / 625 Kg Zinc White by ZnO EPM Manufacturer:Umicore Nederland B.V. Ocre jauen 2022 ( yellow ochre N°2022 ) 175 Kg Manufacturer Le Moulin - Couleurs France Ombe naturelle 1066 ( Umbra natur N°1066 ) 175 Kg Manufacturer Le Moulin - Couleurs France Ombre naturelle 1380 ( Umbra natural dark N°1380 ) 500 Kg Manufacturer Le Moulin - Couleurs France Umbra calcine 4 x 25 Kg = 100 KG Umbre calcine E 1102 Manufacturer Le Moulin - Couleurs France Chalk Chalk / North White United Chalk Works Dammann KG

The Trivac D65B rotary vane vacuum pump is: absolutely as good as new checked according to the manufacturer's specifications, so that all games and dimensions are in the tolerances equipped with new wear parts Available at short notice includes one year warranty After refurbishing, our Leybold Trivac D65B Rotary Vane Pump wants: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty

Electric motor with flange, IE2-WE1R 132SX2 TPM HW, 7,5 KW, 2925 rpm, VEM, new -65% Special price (The current new price in the market is € 1740 excl. VAT) If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. - 400 / 690 V - 2925 rpm - 7,5 KW - 74 kg - shaft diameter 38 mm Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. But we give you a functional guarantee. If the device does not work within 6 months after purchase you can return the goods and we will refund the purchase price.

Our Ruvac RA7001 roller piston vacuum pump is after the general overhaul: absolutely as good as new checked according to the manufacturer's specifications, so that all games and dimensions are in the tolerances equipped with new wear parts Available at short notice includes one year warranty After refurbishing, our Leybold RUVAC RA7001 Roots-blower pumps wants: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty

Used autoclave PANZER, type: 500E -completely refurbished- Electric autoclave with 500 litre boiler volume, with quick release and threaded spindle - Made in Germany - Completely made of high-quality stainless steel - All safety equipment (the latest requirement of the Pressure Vessel Ordinance) - Seemtl. Safety equipment such as safety valve, pressure gauge, overheat protection, steam drain valve, safety outlet valve, etc. - Construction and pressure testing included by TÜV - Including all necessary certificates - Full car. Control by F-value controller - Full car. Control of operating temperature, core temperature, pre-selection and operating time clock - Content: 500 litres - Heating type: Electric, 36 kW, 400 V - Operating pressure: up to 2.5 - 3.0 bar - Temperature range: Up to 130°C - Dimensions: B 1,200 x H. 1,150 x D 1,450 mm - Boiler diameter: 890 mm - Boile ...

Our Sogevac SV300 rotary vane vacuum pump is: absolutely as good as new checked according to the manufacturer's specifications, so that all games and dimensions are in the tolerances equipped with new wear parts Available at short notice includes one year warranty Our Leybold Sogevac SV300 Rotary Vane Pump wants: be as good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty

Immersion pump, TG 50 20/40 840, 4KW, max19m, max70m³/h, Knoll, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used part! The part was purchased from a spare parts warehouse of a company, is in very good condition and fully functional. - 4,0 KW - Hmax 19m - Qmax 1160 L / min or 70m³/h, - 400 V - 50 Hz - 2900 rpm - Immersion pump, cooling lubricant pump - Immersion depth 108 cm - approx. 100kg Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device does not work within 1 month after purchase you can return the goods and we will refund the purchase price.

our Ruvac WAU1001 roots vacuum pump is after the overhaul: absolutely mint condition According to manufacturer specifications verified so all games and mass in the tolerances are with new wear parts available at short includes one year warranty After refurbishing, our LEYBOLD RUVAC WAU1001 roots-blower pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included a one-year warranty

Stationary drying plant for cereals, grass, leaves, potatoes, sugar beet and similar products. Dimensions of the drum Drum length approx. 10 m Drum outside approx. 2.50 m Total weight drum approx. 21520 kg The facility is still in place and can be visited on site by appointment. (Saxony) In addition, but not included in the price, the following components can be offered: Product feed (conveyor belt) Suction and dust removal Cyclone separators The drum was lined in 2010 with new sheets (high-temperature resistant stainless steel). After that, the plant was only operated for one season. Of course, disassembly, loading and transport costs are not included in the purchase price.

Block vane vacuum pump LEYBOLD DK200 is after the overhaul: absolutely mint condition According to manufacturer specifications verified so all games and mass in the tolerances are with new wear parts available at short includes one year warranty LEYBOLD DK200 rotary piston pump pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included a one-year warranty

See a video about this after the description | watch a film after the description If you are using the Ebay app, please use the link below the video in your browser. Wire stitching machine INTROMA • Built in 1987 • Type 3278 • up to 160 brackets / minute • Accessories: German User Manual • Functional | Tested . . Wire Stitching Machine INTROMA • Year 1987 • Type 3278 • Speed: up to 160 stitches/min. • Include german manual • Good working condition | tested .•••••••••••••• WIRe stitching machine INTROMA - YouTube Video will open in a new window Using the eBay App? Paste link into a browser window: ••••••••••••• The machine is available in the warehouse and can be tested. Test in our stock is possible. Only to commercial buyers with proof. Purchase only  ...

MARINE DIESEL ENGINE Reference number 20131 Brand MITSUBISHI Model S12A(N) - MPTK Power 910 HP RPM 1550 RPM Serial number 11245 General condition Running Taken Out Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Flywheel INCLUDED Governor MECHANICAL CONTROL Turbo YES Aspiration Turbocharged / Jacket Water Aftercooled Cooling system 12-cylinder, 4-cycle, water cooled diesel engine, with direct-injection, turbocharger, air-cooler, built-up heat exchanger and sea water pump Starter Electrical Start (24V) Remarks RUNNING ENGINE SPECIFIC FEATURES Panel INCLUDED Expansion tank YES Heat exchanger YES DIMENSIONS LxWxH (cm) 2439mm1482mm1596mm Weight (kg) Net Weight 5000 kg

Duration / ALB ear power 35/40 mm Thread cutting capacity Max M30 (Steigungsabhängig) Hand-reversing switch for forward link. Undervoltage, thermal overload protection, Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm 2johiqzz Column diameter 110 mm Usable surface [BxL] 420 x 340 mm Speed display scale Drilling depth indicator scale Drilling depth stop with fine adjustment Table height with rack and pinion Motor three-phase 400 V pole changing bar 1.5/3 kW Spindle speeds with continuously variable transmission 100-2000 1 / min Machine size (WxDxH) 610 x 850 x 1920 mm Weight 420 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Warranty: 3 years Shipping time: immediately, free loaded DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE  ...

Seydelmann cutter 120 liter, type K 120 AC Completely made of special stainless steel 120-liter bowl made of stainless steel Frequency speed regulator 2 bowl speeds – fast and slow Knives speed frequent speed regulation (6 speed) Unloading device: left side Main cover is made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 190 depth: 150 height: 180 Main motor power: 40 kW Voltage: 400 V, 50 Hz Delivery time: 30 working days after advanced payment

Seydelmann cutter 90 liter, type K 90 AC Completely made of special stainless steel 90-liter bowl made of stainless steel 2 mixing speeds 2 bowl speeds – fast and slow Knives speed frequent speed regulation (6 speed) Unloading device: left side Main cover is made of special steel, stainless steel Noise-canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 200 depth: 170 height: 160 Main motor power: 28 kW Voltage: 400 V, 50 Hz Delivery time: 30 working days after advanced payment

Continuous vacuum filler for straight filling, portioning, and twisting Optional: twisting and holding device All in one 80 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 4 KW Machine dimensions in cm: Width: 70 Length: 90 Height: 165 Delivery time: 20 working days after advanced payment

Centrifugal pump, CRI5-2 A-CA-I-V-HQQV, 14,3m, 5,8m3/h, Grundfos, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition, but not in the original packaging. Vertical, multistage centrifugal. The pump components in contact with the medium are made of high-quality stainless steel. P: 0,37 KW, H: 9m, Hmax: 14,3m, Q: 5,8m³/h 160 x 220 x 450mm hoch, 17kg, Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device d ...

Centrifugal pump, CRN1-3 A-CA-G-V-HQQV, 19,2m, 1,8m3/h, Grundfos, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition, but not in the original packaging. Vertical, multistage centrifugal. The pump components in contact with the medium are made of high-quality stainless steel. P: 0,37 KW, H: 15,6m, Hmax: 19,2m, Q: 1,8m³/h 220 x 180 x 450mm hoch, 17kg, Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the devic ...

Continuous vacuum filler for straight filling, portioning, and twisting Optional: holding and twisting device All in one 250 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 7.5 KW Machine dimensions in cm: Width: 170 Lenght: 130 Height: 190 Delivery time: 20 working days after advanced payment

After cooking stove, thermal oil, Formcook, frying line (CFS, GEA, Koppens, Alco, Stork) - serial: Sprematec - length: approx. 10 m - width: 1350 mm inside / 1518 mm outdoor - heated thermal oil - year: 10/2003

MAK M20 Spares for sale. 1.Reusable Cyl Heads Bare-Pressure Tested Free From Crack:8-10 2.Piston With Groove With in Limit:8-10 3.Con Rod-Free From Crack, Wear Within Limit:8-10 4.Fuel Pump-Good Condition:8-10 5.Reusable Liners Wear Below 0.20mm-Free From Crack, Welding or any Damages:8-10 6.L O Filter-Good Condition:2 7.Water Pump-Good Condition:1 8.Lube oil Pump-Good Condition:1 9.Turbo Charger K54-Good Condition:2 10.STD Condition 6M20 Crankshaft, Within Std Limits, no Crack, no Ovality , Hardness Within Limits:1 11.Cam Shaft 6M20-Good Condition:2 12.Woodward UG-8 - Good Condition:2 13.6M20 Engine Block-Good Condition:1 14.Cam Shaft Gear & Crankshaft Gear-Good Condition:2 15.FLY Wheel-Good Condition 6M20:1 16.After Cooler-Good Condition 6M20:1

Standard scope of delivery â?¢ 12 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, reclining, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.292 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal â?¢ Cam shaft with drive wheel for electric ignition equipment â?¢ Exhaust collection mammals line uncooled, isolated â?¢ Exhaust turbochargers water-cooled, ...

Wartsila VASA V32 spare parts and complete engine also. 1.Reusable Liners wear below 0.30mm – free from crack, welding or any damages:8-10 2.Reusable Cyl heads bare – pressure tested free from crack:8-10 3.Piston with groove with in limit:8-10 4.Con rod – free from crack, wear within limit:8-10 5.Fuel pump - good condition:8-10 6.Centrifugal filter-good condition:1 7.Water pump – good condition:1 8.Lube oil pump - good condition:1 9.Turbo charger 354-11- good condition:2 10.Cam shaft – 12v32 A BANK & B BANK-good condition:2 11.WOODWARD 723 card - good condition:2 12.12v32 engine block - good condition:1 13.CAM SHAFT gear & CRANKSHAFT GEAR- good condition:2 14.FLY WHEEL- good condition 12V32:1 15.AFTER COOLER - good condition 12V32:1 If you are interested in complete engine part, please inform accordingly. For your information in past, we have supplied Engine  ...

HABUSCH BANDSAEGE TYP CY270N â Variabele zaagsnelheid â Verstek â Zaagdruk hydraulicsch regelbaar â Snelspanklem â Koeling â Automatic afslag â Zaagblad 2480 x 27 x 0.9 mm â Noodstop â Documentatie DUTCHMACH Metal processing machines ENSCHEDE-NIEDERLANDE (3 km from the German border)

Stream current meter, 2.0 EM-FIX-800-S0, Camfil / Handte, new -60% Current new price € 3600 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Flow monitor with manually adjustable throttle valve for adjusting the extraction volume. Limit value monitoring and signal when the required extraction air capacity is exceeded or not reached. - Air volume 600-800m³/h - Connecting flange DN 125 on both sides - length 650mm By measuring the volume flow and optimising the setting, high savings in maintenance ...

Type: Ruhle SR2 Loading sections (L x W x H): 500x120x200 mm Cutting length: 1,0 – 30,0 mm Saw blades 1 set Capacity: up to 1800 kg/hour Electric power: 3.5 kW Machine dimension in cm: Width: 70 cm Lenght: 150 cm Height: 125 cm Delivery time: 10 working days after advanced payment

Diosna SP 240 A DL with 3 bowls -Machine after overhaul -New bearings, new wedge belts, new switches, new buttons, -2 Speed -2am for 30 minutes -3 bowls -For 240 kg dough

Type: PR 15 Number of needles: 15 Needle diameter: 4 mm Max product: width 270 mm Tact per minute: 15 to 55 tact/min. Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0,5 to 4,0 bar Electric power: 1.5 kW Machine dimension in cm: Width: 50 Lenght: 125 Height: 150 Delivery time: 30 working days after advanced payment

Cable Extension Sensors, Posiwire WS7.5-10000-HPROF-SB0, ASM, new Manufacturer: ASM Type: Posiwire WS7.5-10000-HPROF-SB0 Measure length 10000mm Attention! We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device does not work within 6 months after purchase you can return the goods and we will refund the purchase price.

Cable Extension Sensors, WDS-40000-P200-M-S0, Miro Epsilon, new, Manufacturer: Micro Epsilon Type: WDS-40000-P200-M-S0 Measure length: 40000mm including test report Attention! We have set the lowest price for the new part on the market. We have other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device does not work within 6 months after purchase you can return the goods and we will refund the purchase price.

Vortex Flowmeter 8800, F020SD1N3D1I1M5, Rosemount, EEx, new Manufacturer: Rosemount Type: Vortex 8800, F020SD1N3D1I1M5 Ex protected Attention! We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition, but not in the original packaging. Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device does not work within 6 months after purchase you can return the goods and we will refund the purchase price.

Bread cutting machine Rösen & Robbert SPA 38 used sickle knife bread cutting machine with adjustable cutting width for breads up to 38cm long suitable for cutting and halving dark breads.Used bread cutting machine with cutting width adjustment of Rösen & Robbert type SPA 38.The machine runs with oiling, with sickle knife and digital steurung.Geignet to cut breads up to 38cm wide.Right compartment is inserted bread then the bread is inserted to the left. In the middle between left and right compartment, the knife rotates and cuts the bread in the desired thickness. The slices are pushed into the left compartment where they are just selected mid-disc holders. After cutting, mam can take out the slices and bag it on the tray. Easy operation and cleaning of the machine, little space requirement.Payment and shipping on request. Bread cutting machine R&R Type: SPA 38 for loaves up  ...

Manufacturer: AHT Model: PARIS 210 (-)/(U) used Cooling: +3C to +15C Freezer: -18C to -23C Refrigerant: R290 Special feature: Plug-in ready The chests are completely overhauled, i.e. cleaned, the defective parts are replaced with original AHT parts, bows of the outer skin are spat on and reglued 3-sided. After that, they are repackaged in a transport-friendly manner. Also available from us: used AHT Paris/Miami /Athens

Simatic S7 Coupler DP/PA, 6ES7 157-0AD81-0XA0, Ex, Siemens, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device does not work within 3 months after purchase you can return the goods and we will refund the purchase price.

Manufacturer: AHT Model: PARIS 250 (-)/(U) used Cool: + 3°C to + 15°C Deep freezing:-18°C to-23°C Refrigerant: R290 Special feature: Tailer-ready The chests are completely overhauled, i.e. cleaned, the defective parts are replaced with original AHT parts, exploits of the outer skin are sped and 3-sided re-glued. After that, they are repackaged in a transport manner.