af compressor used for sale

Auction-ID: A1-48119-184

Exhaust air purification system Manufacturer: Langbein Engelbracht Type: DV2-92 Plant number: No.20245 Year of construction:2004 Exhaust air volume: min. 1000 - max. 3500 Nm³/h Pressure drop: 60 mbar Burner: Gas Burner Inlet temperature: 20°C Power: Heat exchanger 600 kW Heating capacity: 230 kW Reaction temperature: 820 - 950°C Included: documentation, chimney, PC for control with software, EURO-FID, piping (if desired), control cabinet Location: Neu-Ulm

Please note! without pallet. Auction-ID: A1-41278-524

Auction-ID: A1-48399-41

Limit switches ROBOTRON AF1. D1/1 ( AF1D11 ) 10 A 500 V AC IP 54 New ! Dimensions: 105 x 32 x 80 mm

Limit switches ROBOTRON AF1. E1/1 ( AF1E11 ) 10 A 500 V AC IP 54 New ! Dimensions: 105 x 32 x 105 mm

Gauge Shut-off Valve REXROTH Type AF6 Af6EA 3.2/V max. 300 bar New ! Dimensions: 95 x 55 x 60 mm

Lubrication Pump ORSTA Afü 1.0 / 16 TGL 17-747 401 V: 1.0 m3/h p: 1.6 MPa n: 1450 rpm Pk: 0.91 kW Connectors: 3/4 ( inch ) Shaft diameter: Ø 12 / 44 mm Wavelength: 30 / 38 mm Groove width: 4 mm Flange diameter: Ø 80 / 100 x 100 mm Bolt circle diameter: Ø 100 mm Hole diameter: Ø 9 mm used ! Dimensions: 200 x 200 x 140 mm

Offered position due to cessation of activities: Between bars layer l = 2 m = 187 sts Between bars layer l = 140 = 187 pcs Crosses layer l = 240 = 22 sts Floors layer l = 200 = 66 pcs Between bars Afix l = 250 = 41 st Between bars layer l = 105 = 50 pcs Crosses Afix + layer l = 320 = 21 pcs Floors Afix l = 250 = 33 pcs Ladder floors l = 250 = 3 pcs Floors layer l = 100 = 2 pcs Floors layer l = 130 = 5 pcs Between bars l = 68 = 10 st Poles without dilution l = 150 = 17 pcs Posts without dilution l = 200 = 42 pcs Poles without dilution l = 300 = 19 pcs Poles layer l = 100 = 6 pcs Poles with dilution l = 200 = 100 pcs Poles with dilution l = 300 = 34 pcs Elevations = 40 pcs Swivel feet l = 58 = 105 pcs Swivel feet l = 40 = 26 pcs Swivel feet l = 35 = 6 pcs Theorem (broadening) = 8 sts Auction-ID: ...

-2/+7 Celsius Auction-ID: A1-47436-137

Tubular heat exchanger, shell-and-tube heat exchanger, heat exchanger PICKER AF07MFQOAA 2x connection thread: 1 ( inch ) 2x flange connection: inner diameter Ø 45 mm with 2x female thread each: M10 x 1.5, depth: 20 mm, hole spacing: 78 mm 4x fastening thread: M10 x 1.5, Depth: 20 mm, Hole Spacing: 115 / 85 mm Material: Aluminum ( Housing ), Copper ( Tube Bundle ) New ! Dimensions: 360 x 140 x 160 mm

Koppelbox nach Navigator - Couple Box after Navigator MBO Couple Box Year 2001 - Serial-No. XX174 Cuple Box after Navigator to connect to MBO units

Table dimensions 2700 x 850 mm AFK bi-rotary head with 2.5° A and B shaft Auction-ID: A7-48242-1

Commercial Vacuum Cleaner BOSCH Professional GAS 35 L AFC

Circulation Coins Afghanistan 1383/2003 1 - 5 Afghanis KM1044-1046

Circulation coins Afghanistan - Algeria - Tunisia - Morocco - Saudi Arabia - Pakistan - Iraq - United Arab Emirates - Syria approx. 58 pcs.

Coins circulating Afghanistan 10 Pul 1316, 2 Pul 1316

Set South Africa 2000 1 ct - 5 Rand Nelson Mandela

Bilwinco elevator is perfect condition, all stainless. Also valid to attach multihead dosing weigher. He was currently working with the tools seen in the photo. Auction-ID: A7-48385-44

Auction-ID: A1-48414-319

For sale is an unused CIMM AFE CE membrane expansion vessel with a volume of 50 l from the stock of a dissolved installation company. These are original EU goods made in Italy for the EU and German markets. Equipment: • Diaphragm Expansion Tank / Pressure Expansion Tank • 50 l container volume • EPDM membrane • Potable Water Membrane / Drinking Water Version • M 1\" connector • Inlet pressure: 1.5 bar • Max. operating pressure: 10 bar • Test pressure: 14.3 bar • Temperature range: -10 °C to +100 °C • Fluid Group 2, Category II, Module D1 • CE marking 1370 according to EN 13831 • Counter flange with protective cap • Colour: Blue • Stand / bracket on the container • No electrical power / no electrical connection • Branded goods from CIMM • Other versions of the manufacturers CIMM and VAREM available • CIMM versions available with  ...

For sale is an unused CIMM ACS CE membrane expansion vessel with a volume of 24 l from the stock of a dissolved installation company. The container has been stored in a dry and cool place and is visually in good condition. Equipment: • Original EU goods made in Italy • Expansion vessel for the EU and German market • Suitable for domestic water / drinking water, heating systems and, depending on the version, also solar thermal energy • Branded goods from CIMM and VAREM • CIMM versions available with 24 L, 35 L and 50 L, among others • VAREM versions available with 80 l and 100 l • High-quality manufacturer • Several pieces available depending on size Notes: • Unused goods from installation company liquidation • Store in a dry and cool place out of direct sunlight • Other sizes optionally available High-quality branded expansion tank made in Europe,  ...

Including enclosure with wall cabinets total dimensions wxdxh 320x75x200cm. Please note! Without roof outlet, disconnect at first coupling Auction-ID: A1-48235-8

For sale is an unused CIMM AFE CE membrane expansion vessel with a volume of 50 l from the stock of a dissolved installation company. These are original EU goods made in Italy for the EU and German markets. Equipment: • Diaphragm Expansion Tank / Pressure Expansion Tank • 50 l container volume • EPDM membrane • Potable Water Membrane / Drinking Water Version • M 1\" connector • Inlet pressure: 1.5 bar • Max. operating pressure: 10 bar • Test pressure: 14.3 bar • Temperature range: -10 °C to +100 °C • Fluid Group 2, Category II, Module D1 • CE marking 1370 according to EN 13831 • Counter flange with protective cap • Colour: Blue • Stand / bracket on the container • No electrical power / no electrical connection • Branded goods from CIMM • Other versions of the manufacturers CIMM and VAREM available • CIMM versions available with  ...

For sale is an unused CIMM ACS CE membrane expansion vessel with a volume of 24 l from the stock of a dissolved installation company. The container has been stored in a dry and cool place and is visually in good condition. Equipment: • Original EU goods made in Italy • Expansion vessel for the EU and German market • Suitable for domestic water / drinking water, heating systems and, depending on the version, also solar thermal energy • Branded goods from CIMM and VAREM • CIMM versions available with 24 L, 35 L and 50 L, among others • VAREM versions available with 80 l and 100 l • High-quality manufacturer • Several pieces available depending on size Notes: • Unused goods from installation company liquidation • Store in a dry and cool place out of direct sunlight • Other sizes optionally available High-quality branded expansion tank made in Europe,  ...

For sale is an unused CIMM AFE CE membrane expansion vessel with a volume of 35 l from the stock of a dissolved installation company. These are original EU goods made in Italy for the EU and German markets. Equipment: • Diaphragm Expansion Tank / Pressure Expansion Tank • 35 l container volume • EPDM membrane • M 3/4\" connection • Inlet pressure: 1.5 bar • Max. operating pressure: 10 bar • Test pressure: 14.3 bar • Temperature range: -10 °C to +100 °C • Fluid Group 2, Category II, Module D1 • CE marking 1370 according to EN 13831 • WRAS No. 0603097 • Counter flange with protective cap • Colour: Grey • No electrical power / no electrical connection • Branded goods from CIMM • Other versions of the manufacturers CIMM and VAREM available • CIMM versions available with 24 L, 35 L and 50 L, among others • VAREM versions available wit ...

For sale is an unused CIMM AFE CE membrane expansion vessel with a volume of 35 l from the stock of a dissolved installation company. These are original EU goods made in Italy for the EU and German markets. Equipment: • Diaphragm Expansion Tank / Pressure Expansion Tank • 35 l container volume • EPDM membrane • M 3/4\" connection • Inlet pressure: 1.5 bar • Max. operating pressure: 10 bar • Test pressure: 14.3 bar • Temperature range: -10 °C to +100 °C • Fluid Group 2, Category II, Module D1 • CE marking 1370 according to EN 13831 • WRAS No. 0603097 • Counter flange with protective cap • Colour: Grey • No electrical power / no electrical connection • Branded goods from CIMM • Other versions of the manufacturers CIMM and VAREM available • CIMM versions available with 24 L, 35 L and 50 L, among others • VAREM versions available wit ...

Amonyak compressor Stal-Astra,screw with ekonomisor,switch box Venig used,only cca.6.000 operating hours.150Kw cooling capacity.

Amonyak refrigeration plant,from a meat processing plant. The plant is made of 3stk. Compressor Sabroe, Compressor 1. SABROE Type: SMC104L-HP,276m3/h,1465rpm,R717,Y.O.M.1996. Electric motor SCHORCH Type: KN7225M-BB01F-Z,55kW. Compressor 2and3. SABROE Type: CMO28,190m3/h,1460rpm,R717,Y.M.1996. MOTOR SCHORCH Type: KN7200M-BB01F-Z,37kW. The plant is in a very good condition,see pictures. Several pictures and info on request.

Compressor Bitzer 6H-25.2Y-40P,Used for freezing or plus-cooling

Compressor make BITZER Type 4H-15.2Y, 73.7 m3/h conveying volume For more information call +43 0664/1838175 or by emailing info@frigocom.net

Make: Danfoss Type: SZ175S4RC Performer 3 pieces New Vacuum: - Pressure: 25bar - Temperature max: 63C - Temperature min.: -35C - Volume: 31 litres Overpressure: - Pressure: 31.9bar - Temperature max: 65C - Temperature min.: -35C - Volume: 2 litres

Whisper compressor Planet Air double piston; as good as new condition; double pistons; 8 bar; Boiler 50 liters. Whisper compressor Planet Air double poppet; condition as new; double poppet; 8 bar; tank 50 liters.

A very well preserved VML 18 R screw compressor unit is offered. The screw compressor has the following performance data: Air volume 15.82 m³/min P2e 1.8 bar. The electric motor has a power consumption of 55 kW. If you have any questions, please do not hesitate to contact us.

A very well preserved VM 8 R screw compressor unit is offered. The electric motor has a power consumption of 30 kW. If you have any questions, please do not hesitate to contact us.

A new replacement level type VMX 110 RD is offered see pictures. If you have any questions, please do not hesitate to contact us.

compressor compressor Copeland Stream, model

A complete unit is offered.

On offer is a very well-preserved VM 8 R screw compressor unit. The electric motor has a power consumption of 30 kW. If you have any questions, please feel free to contact us.

Air Compressor Screw compressor Manufacturer: Alup Article: SCK 76-08 / SO Volume flow: 9.37 m³/h Motor power: 55.0 KW Completely NEW with all accessories Slight transport damage to the sheet metal, see pictures. Condition : New

A new replacement stage type VMX 110 RD is offered, see pictures. If you have any questions, please feel free to contact us.

Screw Compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6Fabr. No. 6240330200 built in 2003Volume flow rate 4.6 m3/min. Pressure capacity 10 barMotor power main motor 30 kWNe-connection 400 Volt, 50 HzConnection thread 1 1/2 inch- 36004 Switch-on hours read- 19256 load hours read- SoundproofedSpace requirement L x W x H 1850 x 1050 x 1760 mmWeight 910 kggood condition; used

Screw compressor KAESER type BS 50Fabr. No. 402852 built in 1990Volume flow 5 m³/min. Pressure capacity 7.5 barEngine power main motor 30 kWNet connection 400 volts, 50 HzConnection thread 1 1/2 inches- 1107.90Operating hours read- 749.00 load hours read- SoundproofSpace requirement L x W x H 1600 x 1070 x 1350 mmWeight 900 kgvery good conditionWas a reserve compressor and has only a few operating hours; used

Reciprocating compressor KAESER type EPC 630-250Fabr. No. 1802334 year of construction 1992Volume flow at 6 bar 440 litres/min. Capacity max. 630 litres/min. Pressure capacity 10 barBoiler capacity 250 litersEngine power 3 kWNerg connection 400 Volt, 50 Hz (with 16 Amp. Plug)- 2 cylinders oil-lubricated- Pressure switch set to 10 bar- Runtime from 0 bar to 10 bar Shut-off pressure = 5 minSpace required L x W x H 750 x 700 x 1750 mmWeight approx. 150 kgGood condition; used

1 x Atlas Copco compressor GA 18 1 x Atlas Copco Compressor GX 11 FF 1 x compressed air tank 2000 L with condesate trap 1 x Refrigeration Dryer FD 120 1-2 oil-water separators

A used replacement stage type VML 60 is offered, see pictures. The compressor stage is in very good condition, see pictures. If you have any questions, please feel free to contact us.

Soundproof rotary screw compressor with integrated refrigeration dryer and tank. Estimated power 5.5–11 kW. Maximum pressure 10 bar. Estimated flow rate 500–1,200 l/min. Three-phase power supply 400 V. Auction-ID: A7-48385-65

Compressor Make: BITZER Type: OSN7461-K Conveyor volume: 110-303 m3/h Speed: 1450-4000 rpm. Electric motor: 2900rpm Make: SCHORCH Type: KF5200L-AB019-06T IEC 200L IMB3 Power: 55 kW Price on request Contact details can be found under Contact

Manufacturer:ZM Zwickauer Maschinenfabrik Year: 1993 Power: 30 kW Allowable Operating Pressure: 8 bar Rotation speed: 5870 1/min Technical data of supply fan: Manufacturer: ILKA VEB Turbowerke Meißen Type: Lann 500 Year: 1991 Weight: 28 kg Flow: 1,43 - 1,94 m^3/s The total increase in pressure: 358 - 177 Pa Fan rotation speed: 1450 1/min Power: 0,7 kW Technical data of motor: Manufacturer: VEM Elektromotorenwerke Thurm Type: YP 1G4 Rotation speed: 1380 obr/min Power: 0,75 kW Voltage supply: 220/380 V 50 Hz The current consumption:3,45 / 2,0 A Weight: 11 kg Technical data of transformer: Manufacturer: TuR Transformatoren und Rontgenwerk Type: SVS 372 Year: 1991 Power: 37 kW Voltage supply: 380 V Control voltage: 220 V Nominal current: 72 A