5 hl brewery Mill 300 kg / h 5 St. brewery Wort Kettle, LB, V2A (copper surcharge) temperature control GT/LT Fenwow7x Gas direct befeuert, extra steam boilers etc wort cooler wort aeration Hot water tank 1 Lauter pump/AW pump 4 times 5 hl ZKG with fittings 2 bar 1 basement pump 1 glycol tank 1 cooling 1 free site Hamburg 2 beer hoses 4 sight glass 4 flaps incl. mounting, arrival, VISA of the installers as well as incorporations are not included. VAT/customs regional
; Gross weight [kg]: 16780; Rear tyres remaining: 100; Front tyres remaining: 100; Maximum lift capacity [kg]: 230
BEER Pasteurization 1000/3000ltr/h steam The beer warm up by means of a plate heat exchanger. Then, the product on the temperature set by the user is governed by means of a Plattenwaeremetauschers in the "Pasteur"section. The product is held for a specified time at pasteurizing temperature in hot holding range and again cooled by the down-flowing cold beer. This functionality of the Pasteurization system allows an energy recovery efficiency of up to 95%. Plate heat exchanger for preheating and cooling with hot holding track, 30 sec. hot keeping time. The heat exchange between pouring a cold beer and pouring out hot beer is optimized for maximum heat recovery. L0qkx KZE-power ...
; Gross weight [kg]: 16800; Rear tyres remaining: 100; Front tyres remaining: 100; Maximum lift capacity [kg]: 230
MATEC | 30 AGM - 5000 5-axis universal machining center Controls: 2 x HEIDENHAIN TNC 426 Year of construction: 2001 with additional mobile stand in HV execution Machine number: 0355 Traverse paths: X - 5,000 mm / Y - 600 mm / Z - 800 mm Program run: 20,000 hours Version with second milling head - simultaneously edit 2 in 1 Facilities: -Collaboration Mobile stand in HV version incl. control and drives -4.Achse pivotable milling head over to Haney gear -Special machine table with NC axis -A reconditioned replacement spindle -2 x control HEIDENHAIN TNC 426 - chip conveyor with integrated coolant system - 2 x tool magazine with 36 positions (total 72 seats) -2 x press air ...
; Gross weight [kg]: 16732; Rear tyres remaining: 100; Front tyres remaining: 100; Maximum lift capacity [kg]: 230
8 pads 60 x 80 cm plates or even 60 x 40 cm sheets Stainless steel cladding Glass front digital control Mobile on castors Proofer 16 requirements for trays 60 x 40 cm also for 8 plates 60 x 80 cm dimensions: height: approx. 210 cm width: approx. 90 cm depth: 140 cm specifications 400/230 V - 50 Hz - 23kW electric
; Gross weight [kg]: 3160; Rear tyres remaining: 60; Front tyres remaining: 60; Maximum lift capacity [kg]: 200
Cyclone separator Z 275 -For compressed air preparation through elimination of condensate. -The conical shape of the lower part of the housing to prevent tearing with already secluded aerosols. -The turbulence-free zone at the bottom of the cyclone housing prevents tearing with already secluded condensate. incl. Bekomat 13 CO for the safe discharge of oil condensate without unnecessary loss of compressed air in top condition
; Gross weight [kg]: 3160; Rear tyres remaining: 50; Front tyres remaining: 50; Maximum lift capacity [kg]: 200
Iseli type SM175H, sharpening machine for hand tools Especially for blades, knives, drills, etc. Three-phase 380V, 0, 7kW RPM 2700 RPM Operating instructions Sharpening equipment ST83 for up to 4 blades in a cut (it needs only the bottom blade deducted. Maximum grinding length 830 mm Drill bit Sharpener, probably by Kaindl Wet grinding device machine stand with tray and pump with tank. Planer knife grinding machine Including various wheels. Without shown skateboard. Partially repainted. Please the PDF file with our terms and conditions and order form. The machine can be demonstrated like by appointment with us on-site. We offer only machines that demonstration ready are ava ...
; Gross weight [kg]: 3260; Rear tyres remaining: 60; Front tyres remaining: 60; Maximum lift capacity [kg]: 200
I am selling my Brüel & Kjaer collection here. I am happy to ship the devices also EU wide, shipping costs I have to ask. If you are interested in several parts, you will receive a significant discount. For questions 0043 699 18002203 102) Brüel & Kjaer ZR 0020 Integrator Accelerator € 50 103) Brüel & Kjaer approx. 100 different Plug for devices and measurement guide. € 70 106) Brüel & Kjaer MM 0004 Capacitive Transducer € 200 107) Brüel & Kjaer ZR 0004 Loagrithmic Potentiometer € 25 108) Brüel & Kjaer QI 0003 Fiber Pen Set € 20 109) Brüel & Kjaer 4290 Calibration Exciter € 490 110) Brüel & Kjaer AN 0005 25. pcs. Cable € 25 111) Brüel & Kjaer approx. 15kg dif ...
; Gross weight [kg]: 4840; Rear tyres remaining: 70; Front tyres remaining: 70; Maximum lift capacity [kg]: 200
4 lines form fill and seal machine, aseptic design, dosers and filling tunnel steam able, with bottom foil heating in 8 steps, forming, pre-doser for fruit and main doser, top seal decontamination by Peroxide or UV light, sealing, outfeed conveyor, labelling (2 sides total covered, make: Krones, type: Starmatic, cold glue), conveyors and automatic carton erector for open trays (make Schaffer & Flottmann, type: 374, nr 98008), automatic packaging and all auxiliary equipment such as sterile air treatment station, 2 blowers, peroxide injection system and air filters. Cup size rectangular / oval shaped cup, 90 x 70 mm. Capacity:up to 20.100 cups/h, 8x (4x3) cups per stroke, 28 strokes/min. Packa ...
variable speed, bowl lifting\r\nand lowering by a lever \r\naccessories: 1 bowl 60 l stainless steel \r\n 1 whip\r\n 1 bowl 30 l stainless steel \r\n 1 whip\r\naccessories: 1 bowl 60 l stainless steel \r\n 1 whip, 1 doughhook, 1 flatbeater \r\n \r\n 1 bowl 30 l stainless steel \r\n 1 whip, 1 doughhook, 1 flatbeater \r\n
Product number: 1380 Type: Shufflemixer 500 Serial number: 079 Year of construction: 2005 Capacity: 500 L/hr. Power: 3 x 380V, 50Hz, 32A Used for aerating dairy cream / cake batter
; Mileage [km]: 264683; Gross weight [kg]: 3340; Registration Number: WV1ZZZ2D6H005295; Rear tyres remaining: 70; Front tyres remaining: 70; Maximum lift capacity [kg]: 200
Product number: 1379 Type: EVO-390VG Serial number: 3458 Year of construction: 2008 Capacity: max 12 cycles/min. Dye 1: Faerch 2190-53H Dye 2: Fearch 2274-53H Power: 3 x 400V, 50Hz, 51KVA Pneumatics: 0.6Mpa, 600 L/min. Dimensions: 7500 x 1260 x 2400 mm Weight: 6900 kg Including 4 pcs. tool trolley CPS/R
; Gross weight [kg]: 2150; Rear tyres remaining: 89; Front tyres remaining: 89; Inspection Date: 2018; Amount of previous owners: 1; Lift height[mm]: 1600; Maximum lift capacity [kg]: 200; Full service history: Ja
Type: NC-160VH Jaw width: 160 mm Jaw height: 58 mm Max.Wingspan: 300 mm Mechanical SpannkraftverstaerkerSpannkraft: 40kN Mint no or slight use tracks, ground on all sides.
; Gross weight [kg]: 1950; Rear tyres remaining: 99; Front tyres remaining: 99; Inspection Date: 2018; Amount of previous owners: 1; Lift height[mm]: 1600; Maximum lift capacity [kg]: 200; Full service history: Ja
Brand: Aermec Power: 150 kW Year of manufacture: 2003 Refrigerant circuit: 2 pieces Type of refrigerant: R407? Compressors: 4 pcs. Danfoss (scroll) Number of fans: 3 pcs. Hydraulic module: water pumps, buffer tank and a expansion vesse Dimensions: 4 / 1,1 / 1,9 m. Weight: 1355 kg. Type: low noise performance ?ondition: This chiller is in perfect condition. Used air cooled chillers from company Europrom – high quality cooling equipment for industrial processing and conditioning. We have in stock chillers capacity from 15 kw to 1500 kw.
Weight approx.: 1000 kg Dimensions (l x w x h) approx.: 1650 x 900 x 1100 mm Description: Sanding height max. 250 mm, front work table unilaterally swivelling, sanding belt dimensions 2720 x 270 mm, suction nozzle diameter 120 mm
FOR SALE CUMMINS 800 KVA YEAR 1992 HOURS ONLY 971 ONLY SKID MUFFLER AERO TABLE NO PANEL
D 104 1 Miromatic bucket filling machine with lid foil sealing 1 lane for buckets from 1 to 10 kg Capacity by 10 l buckets. approx. 360 buckets/h Manufacturer is: Fa. Miromatic Manufacturer year is: 1999 Mach. No. P295 Type: MDA-1-5/10-02 Working principle: The machine grab the empty buckets out of the magazine and bring the bucket in a headfirst position, that water and disinfection solution can be sprayed into the bucket After this cleaning the bucket is going into the filling station, after the bucket is turned back with a foil unrolled technique the lid foil will be cut into the right size for tho open bucket One foil seal technique is following in the next ...
Technical data Category Front stacker Vehicle number 2-2018-8-1997-KA12000D-P availability In 1 day after order Hours. 14.842 hours Fuel type Diesel Gear Automatic Year of build 1997 Overall height 3,770 mm Load-bearing capacity 12,000 kg Lifting height 5,000 mm Facilities Cabin Protection roof Power steering Rental possible Vehicle description Vehicle data: Make: KALMAR Site 33378 Rheda-Wiedenbrück Type: DCD 12-1200 Load Centre 1200 mm Drive type: Diesel Load capacity: 12000 kg Lifting height: 5000 mm Year of construction: 1997 Hours of operation: 14842 Engine: Volvo Transmission: Dana Mast data: Mast type: Duplex with side shift + fork positio ...
PET (Polyester) FILM COATING M/C 1600mm PET FILM COATING M/C Make:Siotec(Korea) Manufacturing year:2007 Kind of Web : PET(12~120micron) Guide Roll Width : 1,700mm Wed Width : max. 1,600m Line Speed : max. 100m/min ? COATING M/C Make:Siotec(Korea) Manufacturing year:2007 Model: CT-001700-L Kind of Web: PET(12~120micron) Guide Roll Width: 1,700mm Web Width: max. 1,600mm Line Speed: max. 100m/min Control System: AC Vector System 9)Slot Coating Unit Direce Die Coating Type Coating Roll: ?2501,700mm 10)3rd Dryer Unit(6sets) Chamber: W2,1504,000H1,650mm Heat Exchanger: 100,000kcal/hr 11)Laminating Unit 2 Roll Press Typ ...
Aerzener rotary piston blowers Delta blower type GM 10 S Power 15 kW, P1 = 1 bar, P2 = 0.45 bar, 9.4 cubic meters / min Q =, year of manufacture 1996 Very quiet due to full containment, great condition! Was used in a wastewater treatment plant for recovery ventilation, always maintained and was up to the expansion in the use of Length 130 cm / height 160 cm / 140 cm width / weight approx. 500 kg Operating instructions with it. â?¬3800 / PCs Forklifts to load up there. Pickup in 76829 Landau, or freight shipping
Aerzener rotary piston blowers Type GMB 14.8 Power 10 kW, P1 = 1 bar, P2 = 0.45 bar, 7 cubic meters / min = Q, built in 1982 Was used in a wastewater treatment plant for recovery ventilation, always maintained and was up to the expansion in the use of Length 170 cm / height 140 cm, width 80 cm / weight approx. 800 kg Operating and repair instructions with it. â?¬2500 / PCs 2 units available Forklifts to load up there. Pickup in 76829 Landau, or freight shipping
The fan speeds are reconditioned, can be supplied as a complete unit, performance data according to customer specifications.
Miwe shop oven Aero Type: AE 8.0604 / AE 8.0604 Year of manufacture 2004 digital control 2 ovens stacked both ovens are for 8 plates 60 x 40 cm on rollers nominal recording 30.4 kW dimensions: height: 220 cm Width: approx 90 cm Depth: 85 cm
Vacuum lifter, vacuum lifting device, vacuum suction, plate lifter -2x vacuum surfaces 420 x 820 mm -electrically swiveling to 90 ° -Vacuum surfaces displaceable 1520 - 2280 mm -Height 690 mm -Lifting force 300 Kg -Side channel compressor Becker 2,2 KW -unused -Dimensions 2000/1500 / H690 mm -Dead weight 244 kg
8 pads 60 x 80 cm plates or even 60 x 40 cm sheets Stainless steel cladding glass front digital control movable on wheels Proofing Cabinet 16 requirements for trays 60 x 40 cm Dimensions Height: 210 cm width: 90 cm depth: 140 cm specifications 400/230 V - 50 Hz - 23 kW electric