aeg elotherm used for sale

Double bench grinder, double grinding machine, pedestal grinder, bench grinder, drill grinding machine -Grinding disc: max. Ø 200 x 30 mm -Speed: 2800 rpm -Motor power: 0.74 kW -Operating voltage: 380 volts

Three-phase motor, electric motor -Power: 1.3 / 2.6 kW -Speed: 710/1410 rpm -Shaft: Ø 28 x 60 mm -Construction: B5 -Protection class: IP55 -Dimensions: 380/270/H250 mm -Weight: 32 kg

Electric motor, three-phase motor, brake motor -Manufacturer: AEG, electric motor Typ AM160 MV4 Ex -Power: 10 kW -Speed: 1450 rpm -Shaft: Ø 42 x 110 mm -Protection class: IP 44 -Construction: B3 -Dimensions: 550/340/H290 mm -Weight: 90 kg

packet weight: 900 kg x-travel: 200 mm number: 3 Stück : 2x AEG mit Steinen : 1x FAG mit Magnet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AEG Double Bench Grinder 400 V.

General SKU319U745 LocationBarneveld MakeAEG vibrationstechnik TypeGA1712/3240-EY No.B60217 Year of constructionunknown Main Features MaterialStainless steel Length1850 mm Width310 mm Specified Features - Vibro feeder MaterialStainless steel 1.4305 (303) Vibro feedercheck Feeder diameter310mm Feeder length1850mm Closedcheck InletDia:300mm OutletDia:300mm With vibro motorcheck With motor0,55kW, 380/420Volt (EX) Without controlscheck Information Total height1,1m Weight750kg Floorspace2x0,7mVibro feedersAEG VibrationstConveying systems > Vibro feedersBrand > AEG Vibrationst What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

UNUSED - Speed: 3.000 RPM - Frequency: 50 Hz - Voltage: 400V. - Amperage: 41A

Magnetic drill, hand drill -Magnetic base: Magnetor type PS 32 L -Drilling machine: AEG type HBE-IV - Recording: MK2 -Max. Drill: Ø 23 mm -Connection: 265V/200Hz -Dimensions: 700/300/H670 mm -Weight: 49 kg

two-armed drill, rotary drill, magnetic drill, impact drill, two-hand drill -Taper: MK with drill chuck -Nominal consumption: 250 W -Connection: 220 volts -Max. Drill: Ø 15 mm -Dimensions: 420/420/H120 mm -Weight: 7.1 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 50 A - 300 A -Installation dimensions: LxWxD approx. 66x138x165 mm -Dimensions: 72/144/H165 mm -Weight: 0.7 kg

max. dia. of grinding wheel: 300 mm wheel width max: 40 mm grinding spindle speed: 1500 U/min engine output: 1,1 kW Industrial double grinder Very quiet, low-vibration operation With two high-grade corundum discs The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

UNUSED - Size: 1.250 x 900 mm (Stainless steel) - Magnetic Vibrator: MV E (3 kW / 1.500 U/min) - With Tyristor controller

Nibbling machine, nibbler, nibbler, tin snips, circular shears -Power: 330 watts -Voltage: 220 V -Max. Cutting capacity: 2 mm -Dimensions: 280/60/H150 mm -Weight: 2.3 kg

Bench drill, stand drill, pillar drill, column drill -Spindle holder drill chuck: 4 mm -Clamping table: O 125 mm - Projection: 105 mm -Speeds: 1400 rpm -Pillars diameter: 41 mm -Spindle stroke: 55 mm -Motor power: 75W -Dimensions: 290/150/H530 mm -Weight: 13.4kg

Electric motor, three-phase motor, -Power: 1.1 kW -Speed: 930 rpm -Shaft: Ø 22 x 50 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 370/300/H250 mm -Weight: 39 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Engine power: 1.1 kW -Grinding discs: 300 x 40 -Operating voltage: 380 volts

Engine Brand: MTU, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Working Hours: 99999 Hour(s), Engine Condition: Core , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 1560 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 1875 , Generator Hz: 50 , Generator Volts: 6600 , Generator Amps: 164 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/aeg-dkb-h4506-04-generator-187 5-kva-used/52, , = More information =, , Empty weight: 9.800 kg, Type number: DKBH 4506/04 GENERATOR 1875 KVA

AEG 3~ Motor AM 160 LZA4 15kW 1460 1/min 60Hz Electric Motor Pumpenmotor Dieses originale ABB 3~ Motor stammt aus einer fachgerechten Demontage und befindet sich in gebrauchtem Zustand. Vor dem Verkauf wurde es sorgfältig überprüft, gereinigt und auf Funktion getestet. Das Teil ist technisch einwandfrei und voll funktionsfähig. Normale Gebrauchsspuren wie kleine Kratzer oder Verschmutzungen durch den vorherigen Einsatz können vorhanden sein, haben jedoch keinen Einfluss auf die Funktionsweise.

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 920 rpm -Shaft: Ø 28 x 60 mm -Design: B5 -Protection class: IP 54 -Dimensions: 385/276/H250 mm -Weight: 32 kg

Electric motor, three-phase motor -Power: 0.25 kW -Speed: 670 rpm -Shaft: Ø 19 x 40 mm -Design: B3 -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 280/205/H150 mm -Weight: 7.5 kg

AEG 3~ Motor AM 160 LZA4 15kW 1460 1/min 60Hz Electric Motor Pumpenmotor Dieses originale AEG 3~ Motor stammt aus einer fachgerechten Demontage und befindet sich in gebrauchtem Zustand. Vor dem Verkauf wurde es sorgfältig überprüft, gereinigt und auf Funktion getestet. Das Teil ist technisch einwandfrei und voll funktionsfähig. Normale Gebrauchsspuren wie kleine Kratzer oder Verschmutzungen durch den vorherigen Einsatz können vorhanden sein, haben jedoch keinen Einfluss auf die Funktionsweise.

General SKU319U744 MakeAEG Vibrationtechnik LocationBarneveld TypeGA1712/3240-Y Main Features MaterialStainless steel Length1850 mm Width310 mm Specified Features - Vibro feeder MaterialStainless steel 1.4305 (303) Vibro feedercheck Feeder diameter310mm Feeder length1850mm Closedcheck InletDia:300mm OutletDia:300mm With vibro motorcheck 380Volt, 6,2A Without controlscheck Information No.B602.18 Year of constructionunknown Floorspace2x0,7m Total height1,1m Weight750kgVibro feedersAEG VibrationstConveying systems > Vibro feedersBrand > AEG Vibrationst What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Three-phase motor, electric motor -Power: 1.3 kW -Speed: 2810 rpm -Shaft: Ø 23 x 50 mm -Construction: B14 -Protection class: -Dimensions: 280/255/H208 mm -Weight: 20 kg

Workshop lamp, lamp, hall lamp, hall lighting, pendant lamp, industrial lamp -Power: 165 watts -Number: 1x lamp available -Dimensions: 540/540/H710 mm -Weight: 9.7kg

160 kw. a.c.drive, brand A.E.G., year 1995,, professionally reconditioned

General SKU426X1425 LocationBarneveld Main Features MaterialStainless steel Surface1.1 m2 Size length1750 mm Sizes width650 mm Specified Features - Vibro sieve Sieve surface1,1 m² Number of sieve decks:1 Inletø 120 mm Outlet2x ø 120 mm Drive vibro motorcheck 2x Motor0,5 kW (400 V 1410 rpm) Sieve perforation3,8 mm, 1,5 mm With extra sieve deckscheck MaterialStainless steel 1.4301 (304) Information MakeAEG Vibrationst Serial7 32609-002 Magento base g_extra_specificationsFormer Foeth SKU 093U721, sieve 650x1750mm (=1.137.500 mm 1,1 m2) Information Year of construction1997 Floor space2,3 x 1,1 m Total height1,7 m Weight350 kgVibro sievesAEG VibrationstSieves > Vibro sievesBrand > AEG Vibrationst What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are w ...

Deutz generator set 270 kVA --> former THW - AEG Generator - - - - - Engine: - Manufacturer: Deutz (Germany) - 6 cylinders - Turbo - Diesel - Water-cooled - 1500 rpm - - - - - Generator - Manufacturer: AEG (Germany) - 270 kVA - 230 / 400 volts - 50 Hertz - - - - - Condition / Origin: - The power generator comes from the THW - It was used for occasional use - The device has received regular maintenance - A test run was made. The engine runs well and the generator produces 400V and 50 Hz. - - - - - Scope of delivery: - Deutz generator set 270 kVA - Consisting of motor and generator - Installed on a metal base frame - Small, side-mounted oil hand pump - - - - - Shipping: - Germany-wide transport is possible for an extra charge - To be able to quote an exact freight price, please send me an inquiry with your zip code - - - - - Price:  ...

Motor contactor, auxiliary contactor, contactor, semiconductor contactor, contactor -Manufacturer: AEG -Type: LS 8/L14 TKS -Application: DC operated -Quantity: 1 piece available -Price: per piece -Weight: 0.5 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring device, control panel -Type: 1.660711.2 -Display range: 0 °C - 600 °C -Installation dimensions: LxWxD approx. 66x138x165 mm -Dimensions: 72/144/H165 mm -Weight: 1 kg

Motor contactor, auxiliary contactor, contactor, semiconductor contactor, contactor -Manufacturer: AEG -Type: SH10G.64 -Number: 3 pieces available -Price: per piece -Weight: 0.8 kg/pc.

Electric motor, three-phase motor -Power: 0.55 kW -Speed: 2840 rpm -Shaft: Ø 14 x 30 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 215/175/H150 mm -Weight: 4.2 kg

electric motor, three-phase motor -Power: 1.1 kW -Speed: 2800 rpm -Shaft diameter: 19 mm -Design: B5 -Protection class: IP 44 -with brake -Dimensions: 375/200/H215 mm -Weight: 26 kg

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station, injection molding machine, plastic injection molding machine, plastic injection molding press -Manufacturer: AEG, hydraulic unit from Krauss Maffei KM 250-1200 B injection molding machine -Motor: Bauknecht type AJ 225 MV4 Q4 55 kW / 1460 rpm -Individual components: see images -Dimensions: 1340/650/H760 mm -Weight: 557 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Type No .: 6.618962.4 -Display range: 0 V - 500 V -Installation dimensions: LxWxD approx. 66x138x165 mm -Dimensions: 72/144/H165 mm -Weight: 1.3 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 0 V - 250 V. -Installation dimensions: LxWxD approx. 66x138x230 mm -Number: 3x available -Price: per piece -Dimensions: 72/144/H230 mm -Weight: 1.4 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 0 A - 150 A -Installation dimensions: LxWxD approx. 66x138x175 mm -Number: 3x available -Price: per piece -Dimensions: 72/144/H175 mm -Weight: 1 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 0 A - 200 A -AC -Installation dimensions: LxWxD approx. 66x138x165 mm -Number: 3x available -Price: per piece -Dimensions: 72/144/H165 mm -Weight: 0.7 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring device, control panel -Display range: 0 °C - 150 °C -Installation dimensions: LxWxD approx. 66x138x175 mm -6 V 10 mA -Dimensions: 72/144/H175 mm -Weight: 1.5 kg

Electric motor, three-phase motor -Power: 0.8 kW -Speed: 1440 rpm -Shaft diameter: 24 mm -Construction: B5 -Protection class: IP 33 -Dimensions: 310/200/H250 mm -Weight: 21.8 kg

electric motor, three-phase motor -Power: 0.12 kW -Speed: 680 rpm -Shaft diameter: 14 mm -Design: B3 -Protection class: IP 33 -Price: per piece -Quantity: 6 available -Dimensions: 235/190/H135 mm -Weight: 7.7 kg

Gear motor, electric motor, three-phase motor -Speed: 4 rpm -Power: 0.09kw -Construction: B3 angle -Diameter shaft: Ø 18 mm -Protection class: IP 54 -Number: 1x motor available -Dimensions: 290/230/H205 mm -Weight: 10kg

Electric motor, three-phase motor -Power: 5.5 kW -Speed: 1430 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: -Price: per piece -Number: 1x available -Dimensions: 400/340/H350 mm -Weight: 52 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Type: No. 6.620086.4 -Display range: 200 V - 240 V -Installation dimensions: LxWxD approx. 66x138x165 mm -Number: 3x available -Price: per piece -Dimensions: 72/144/H165 mm -Weight: 1 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring device, control panel -Type: No. 6.660713.2 -Display range: 0 °C - 150 °C -Installation dimensions: LxWxD approx. 66x138x192 mm -6 V 39 mA -Dimensions: 72/144/H192 mm -Weight: 1 kg

Three-phase motor, electric motor -Power: 45 kW -Speed: 2955 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 770/540/H510 mm -Weight: 300 kg

Three-phase motor, electric motor -Engine condition: unused -Power: 11 kW -Speed: 2910 rpm -Bolt circle: 265 mm -Flange diameter: 300 mm -Shaft: Ø 38 mm -Design: B35 -Protection class: IP 54 -Quantity: 6 pieces available -Price: per piece -Dimensions: 500/335/H300 mm -Weight: 82 kg

Electric motor, three-phase motor -Power: 4 kW -Speed: 2870 rpm -Shaft: Ø 28 mm -Construction: B35 -Protection class: IP 54 -Number: 8x engines available from Ecoair -Number: 24x motors available from AEG -Price: per piece -Dimensions: 370/277/H250 mm -Weight: 28 kg

Electric motor, three-phase motor -Power: 0.55 kW -Speed: 1420 rpm -Shaft: Ø 14 mm -Construction: B5 -Protection class: IP 33 -Dimensions: 250/230/H160 mm -Weight: 11 kg

Electric motor, three-phase motor -Power: 1.1 kW -Speed: 1410 rpm -Shaft: Ø 18 mm -Construction: B3 -Protection class: EX -Dimensions: 390/210/H340 mm -Weight: 49 kg

Electric motor, three-phase motor -Replacement motor: for pressure blower -Power: 3.0 kW -Speed: 2800 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: - -Dimensions: 390/320/H320 mm -Weight: 24 kg