advance used for sale

New in stock: This powerful Sykes 100CP dirty water pump!, With its robust design and high-quality performance, this pump is perfect for various industrial and construction applications., , Thanks to its impressive capacity, the Sykes 100CP dirty water pump can effortlessly move large volumes of dirty water, making it ideal for quickly and efficiently pumping out construction pits, basements, and other areas where water is a problem., , With its reliable motor and durable construction, this pump is designed to deliver long-lasting performance, even under demanding conditions. Moreover, it is equipped with simple controls., , Dont wait any longer and upgrade your machine park today with the Sykes 100CP dirty water pump. Please contact us for more information., With these Sykes you are guaranteed high-quality performance for all your wastewater disposal needs!”, , Max Flow: 235 m3, Max P ...

This is the newly designed version of the Selwood D75 in a robust sound-damped housing., This D75 is powered by a Hatz stage 5 diesel engine that meets the strictest emission requirements., The pump is easy to operate and maintain. Pump is equipped with an automatic start/stop system and is supplied with 2 float switches, This Selwood D75 is equipped with its own vacuum system, so that the suction of the water to be pumped is no problem for, it. It pumps a maximum of 59 m3 per hour is its maximum., A maximum delivery height of 23.5 meters and a dirt passage of 29 mm., , If you are interested, please do not hesitate to contact us, we will be happy to assist you., , Throughput capacity: 59 m3/h, Max dirt passage: 29 mm, Motor brand: Hatz, Max. head: 24 MWK, Max dirt passag: 2000 rpm, Weight: 650 kg, , = More information =, , General information, Year of manufacture: 2023, Applicable materi ...

The SIP 150-6 screw impeller pump is designed and built to meet the needs and demands of much of the world without the need for advanced technologies. This mobile pump unit is the simplest and most basic version in our range of 6″ screw impeller pumps., The Budget configuration is a typical old-fashioned mechanical configuration, has a direct-drive vacuum pump with V-belt without electromagnetic clutch, so the vacuum pump always works even if the screw pump has water., This configuration has no level control, and the speed must be adjusted manually via the throttle lever on the engine., This pump is as basic as you could want... Start/Stop with a switch and the RPM has to be adjusted manually. Equipped with float switching though !, However, the pump unit is completely autonomous and equipped with all the elements that Impulse always offers., It is equipped with its own fuel tank and o ...

New and unused Caffini Libellula 1-3 LB80 self-priming diaphragm pump. These slop pumps have been used since 1968. This successful pump type, also called cats head in practice, has remained virtually unchanged since that time. The pumps are suitable as a slurry pump or for small dewatering. This caffini libellula diaphragm pump is equipped with a Hatz diesel engine mounted in a mobile frame. Can be supplied with any desired coupling/connection. Max: 20 m³ per hour Max: 15 mWK 4 pcs. in stock If you have any questions, you can of course always contact us., , Throughput capacity: 20 m3/h, Max dirt passage: 50 mm, Motor brand: Hatz, Max. head: 15 MWK, Weight: 150 kg, , = More information =, , Year of manufacture: 2024, Colour: Blue, Applicable material: Water, Empty weight: 150 kg, Cargo space capacity: 335 l, Technical condition: very good, Visual appearance: very good, Damages: none, P ...

BBA GHP 100 BBA high pressure pump. This BBA pump with high head is suitable for many applications. The powerful Perkins engine is built into a sound-dampened housing. Max. capacity 225 m3/h Max. Head 78 mwc. Available with any connection you require. Are you unsure whether this machine provides the desired working point for you? or you would like more information about delivery options. Do not hesitate to contact us, we are happy to assist you!, , Throughput capacity: 225 m3/h, Max dirt passage: 30 mm, Max. head: 77 MWK, Max dirt passag: 2300 rpm, Weight: 2650 kg, , = More information =, , Applicable material: Water, Empty weight: 4.000 kg, Cargo space capacity: 3.750 l, Technical condition: good, Visual appearance: good, Damages: none, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer info ...

New Deutz TCD 2012L064V this engine has been converted into various machines if you are looking we have it., TCD 2012L064V 152 KW -- 203 HP 2100 rpm., If you are looking for another Deutz engine, please do not hesitate to contact us., We supply any desired type of Deutz engine new, used or overhauled., With appropriate software and in the configuration according to the engine number you specified., , = More information =, , Year of manufacture: 2021, Colour: Grey, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Damages: none, VAT/margin: VAT qualifying, Type number: Exchange, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fittings. A physical  ...

BBA BA200K D328 powered by a Perkins 1104 diesel engine, , - Machine is unused, -Equipped with floats for automatic switching, - Suction: DN250, -Press: DN300, , MAX capacity: 700m3/h, MAX head: 31 MWC, MAX free passage: 105mm, , for and by: sewage water, dredging industry and shipping, rental companies, seawater, chemical industry, calamities and in civil engineering., , Throughput capacity: 700 m3/h, Max dirt passage: 105 mm, Motor brand: Deutz, Max. head: 32 MWK, Max dirt passag: 1800 rpm, Weight: 2650 kg, , = More information =, , Year of manufacture: 2013, Applicable material: Water, Empty weight: 2.700 kg, Height: 140 cm, Cargo space capacity: 11.670 l, Technical condition: very good, Visual appearance: very good, Damages: none, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer informa ...

LEO high pressure petrol driven pump 4-stroke, Suitable for clear or slightly polluted water for irrigation, transferring water into swimming pools., , Max yield: 20 m3, Max pressure: 80 mwk, , If you have any questions, please call us., , Throughput capacity: 20 m3/h, Max dirt passag: 3600 rpm, Weight: 22 kg, , = More information =, , Year of manufacture: 2024, Applicable material: Water, Empty weight: 22 kg, Cargo space capacity: 335 l, Technical condition: very good, Visual appearance: very good, Damages: none, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling sy ...

1 used pallet rack; Make: SSi-Schäfer Type: PR600 Year of construction: 2010 Longitudinal truss rack Max. Field Load: -approx. 529 pieces of stand frame Frame height: approx. 10,300 mm Frame depth: 1,100 mm; profile: P120 / 100 / 2-3, galvanized - approx. 5,544 trusses; Truss length:3,700 mm Profile CE 160/50; galvanized Structure can be individually designed. Reserved for intermediaries Disassembled plant is located in our warehouse in Eitorf Transport and assembly can be offered separately. You are welcome to view the material in advance. Price on request!

We have several of these machines in stock, with div hours and years., Directly available!, , , The pumps from the BA series are designed with the, emphasis on reliability, durability and, efficiency. Thanks to their fully mechanical, vacuum system, these pumps prime quickly even, without liquid in the pump housing. Due to the heavy, construction of both the pump and the casing make, the pumps of the BA series are ideal for use in the, contracting and rental market., , Throughput capacity: 135 m3/h, Max dirt passage: 82 mm, Motor brand: HATZ 1D81z, Max. head: 18 MWK, Max dirt passag: 1500 rpm, Weight: 1100 kg, , = More information =, , Year of manufacture: 2008, Empty weight: 1.100 kg, Connector size: 4 inch, Quick coupler system: Yes, Technical condition: good, Visual appearance: good, Damages: none, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John  ...

This Robot BW2041 series dry mounted dirty water pumps features a vortex impeller, which ensures good solids handling. This pump is for the application as dirty water pump or sewage pump. , In stock and immediately available, , Throughput capacity: 135 m3/h, Max dirt passage: 100 mm, Motor brand: DEUTZ F2M 1011F, Max. head: 25 MWK, Max dirt passag: 1800 rpm, , = More information =, , Year of manufacture: 2004, Empty weight: 1.500 kg, Connector size: 4 inch, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Damages: none, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Al ...

The BBA Pumps NB/BV100 is a versatile dry self-priming dirty water pump. The super soundproofed casing houses a centrifugal pump driven by DEUTZ diesel engine. This gives the pump a capacity of 150m³/h and a head of 28 meters. This machine is equipped with vacuum system and vacuum pump. With this dry-mounted pump, you can count on a powerful suction operation of 8 to 9 meters or between 70 to 100 meters of suction length. Pre-filling with water is not required with the machine. This makes this dirty water pump quickly deployable., BBAs NB/BV series is built to be used in demanding drilling and bentonite applications. It therefore effortlessly pumps sludge and bentonite. The pump offers high performance and is economical to operate. It is rented in a variety of industries, from GWW to government., , Throughput capacity: 140 m3/h, Max dirt passage: 90 mm, Motor brand: DEUTZ F2L 1011F, Max ...

BBA 4 inch Dirty water pump , vacuum pump supported , self-priming., , Throughput capacity: 140 m3/h, Max dirt passage: 82 mm, Motor brand: HATZ 1D81z, Max. head: 17 MWK, Max dirt passag: 1500 rpm, , = More information =, , Year of manufacture: 2004, Empty weight: 1.100 kg, Connector size: 4 inch, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fittings. A physical visit to our location is very well possible! Make your visit known in advance to avoid disappointment ...

CNC Lathe OKUMA LU3000EX Year 2021 Main features. OSP-P300LA（ Easy program advance D） 8’ Hallow Chuck Max length 600 Touch Center Up turret V-12/Below turret:V-8 Tailstock Steady rest Chip conveyor High pressure coolant Mist collector

BITO trusses, truss length: 2700 mm (clear width) Profile: PT120M, 120 x 50 mm Load capacity per pair of trusses: 3,000 kg Color: Blue Larger number available Graduated: 1 - 10 pieces EUR 22,00 net 11 - 20 pieces EUR 20,00 net from 50 pieces EUR 18,50 net Goods are in our warehouse in Bochum You are welcome to view the material in advance. Prices from stock Bochum We are happy to arrange transport

67x75cm, Min: 24x24cm, Max Image Area: 66,8x75cm, Resolutions: Max. 2540 dpi, 64 Diodes, 15 Plates/hour, Advance PST 26 Stacker, Standard Accessories

Manufacturer: Probat Type: Probatone 12 Type2 SMG2 PC Year of Make: 2014 Nominal load: 28 kW Condition: very good Hours: 1858 h Capacity: 12 kg Regular maintenance/service by service providers is documented. available from JULY 2024. Can be viewed in advance at the site (during roasting). "SUPPORT" (assembly/instruction/... possible for the buyer and included in the price.

Key data: 45 °, 1500 mm

Used sliding table saw Manufacturer: SCM Type SI 12 SW Carriage length 1,500 mm max. saw blade 300 mm max. cutting height 100 mm Year of manufacture 1991 Weight approx. 430 kg Item location: 59425 Unna The machine can be viewed under power. A forklift for loading is available. Prior sale is reserved. It is possible to professionally examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition, is non-binding and has been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold from the location / warehouse, with a transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, trad ...

Used disc grinding machine Manufacturer: Zimmermann Type FZ SZ 2 Diameter 600 mm, double-sided Year of manufacture 1991 Power 1.5 kW Speed 920 rpm. Weight approx. 315 kg Swivel table, with handwheel, scale and zero lock Table can be completely swivelled away for easier sanding sheet change With angle stop, cylindrical grinding device and operating instructions Item location: 59425 Unna The machine can be viewed under power. We will be happy to send you more photos by e-mail. A forklift for loading is available. Prior sale is reserved. It is possible to professionally examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition, is non-binding and has been shown to the best of our knowledge and belief. Errors are therefore reserved. The warrant ...

This 3-axis Mitsubishi Electric EA8-S was manufactured in 2016. It features a fixed table with a retractable basin and an Advance M700 control unit. The machine offers strokes of 300x250x250mm, can handle a maximum piece size of 770x490mm, and supports up to 550Kg. Equipped with a tool changer for 10 tools, the Mitsubishi Electric EA8-S machine we have for sale represents a robust choice for precision erosion tasks. Contact us for further details regarding this Erosion machine.

Key data: 340 mm, 695 mm, 5000 1/min

Year of construction 12-2022 Mazatrol Smooth EZ Max. turning diameter: 340 mm Max. swing diameter: 695 mm Distance between clamping jaws: 575 mm Max. bar passage: 65 mm Travel X/Z: 215/605 mm Main spindle Max. speed 5,000 rpm Main spindle spindle nose A2-6 Sub-spindle Max. speed 6,000 rpm Main spindle spindle nose A2-5 12-speed tool turret 12 driven tool stations, 5.5 kW Max. speed driven tools 4,500 rpm Overload Monitoring Mayfran Chip Conveyor, Right Discharge Dmjg8r Automation package - Tooleye - Preparation of chip conveyors - Robot interface (ADVANCE/ETHERNET/IP) - Spindle orientation in a fixed position - Air blowing device on the chuck, main spindle - 15 bar high-pressure cooling system -Signal lamp - C-axis counter pindle 0.0001° - 8" Power Chuck, Kitagawa BR08 & Cyl. SR1566C Machine is as good as new. Machine has never produced.

Description: • CNC centre lathe • Serial number 48796 • Maximum turning length 2000 mm • Maximum turning diameter 620 mm • Turning over bed 620 mm • Turning over slide 415 mm • Bar passage diameter 80 mm • Working advance speed (X,Z axes): from 0 m/min up to 5000 mm/min • Rapid feed speed (X,Z axes): 5000 m/min • Main spindle: motor power 7.50 KW, maximum rotation speed 1700 rpm • 3-jaw chuck • Tailstock: quill diameter 72 mm, quill travel 180 mm, morse taper 5 • FANUC control • Various accessories included weight approx.: 2,400 kg, Approx. Onsite Dimension. (l x w x h): 3,800 x 1,350 x 1,940 mm

Description: • Chamfering machine, beveling machine • Sheet thickness up to approx. 50 mm • Bevel angle from 20° up to 45° • Maximum bevel length 20mm • Advance speed up to 1.40 m/min • Transport dimensions 1200 x 800 x 1400 mm Approx. Onsite Dimension. (l x w x h): 900 x 750 x 1,250 mm, weight approx.: 350 kg

This 9-axis STAR SR-32J type N swiss type turning machine was manufactured in 2018. It offers a maximum machining diameter of 32 mm, with spindle revolutions up to 7000 rpm and a spindle motor power of 7.5/3.7 kW. Key features include a counter spindle with a maximum grip and pass diameter of 32 mm and a rapid axes advance of 24 m/min. The machine also comes equipped with a bar feeder. Contact us for more information about this swiss type turning machine.

Conrad Boxer 200 drill 2017, , Pull-up 4000 daN/kg, Pull down 2000 daN/kg, Winch//Witch 1450 daN / kg, Year of construction 2017, Weight 12,500 kg, Stroke 430 cm, This Conrad boxer is equipped with:, Tracked chassis with a rotating upper carriage, - track length center to center : 2600mm., - track width: 400 mm., Winch Brevini EGO200LS with 50 meters / Ø10 mm., Gauge wire winch 200 meters stainless steel wire, Ø 2mm., , Hydraulically driven 4 drill head, , - Max. Drive torque 380 - 400 daNm, - Breakaway torque 475 - 500 daNm, - Max. Speed ​​80 rpm, , Hydraulically operated change clock, suitable for 3 1/2 drill pipes., Coil head suspension with weight compensation, Hydraulically operated capture clamp, Hydraulic tank 480 liters, Hydraulically driven syringe pump, Drill pipe manipulator, Drill pipe storage rack incl. 50 pcs. 4 meters of 3-1/2 inch drill pipes, 1 cassette, It is equi ...

Description: Edge Bander: STREAM B1 8.0 with LIGMATECH ZHR 05 BOOMERANG Return System Machine Specifications STREAM B1 8.0 S/N: 20798 Distance between centers: 8000 mm Total length: 9200 mm + Return Panel length: min 150 mm - max 3200 mm Panel width: min 100 mm - max 3200 mm Panel height: min 10 mm - max 60 mm Thickness of edgebanding strip in rolls: min 0.3 mm - max 3 mm Thickness of edgebanding strip in strips: max 20 mm Edgebanding strip height: min 15 mm - max 65 mm Working line height: 950 mm Panel projection from drive belt: 35 mm Drive track speed of advance: min 10 m/min - max 24 m/min Suction air speed: 30 m/sec Air supply pressure: 7 ÷ 10 bar Machine length: 9140 mm Width: 2600 mm Height: 2100 mm Return System Specifications LIGMATECH ZHR 05 BOOMERANG Longitudinal Processing Panel length: 300 - 2500 mm Panel width: 60 - 800 mm Cross Processing Pa ...

Number of sanding units: 4 St sanding width: 190 mm Sanding height max.: 4-180 mm weight: 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians -------------------------------------- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geom ...

Key data: 670 mm, 1 mm

Smooth Ai Control Max. turning diameter: 670 mm Max. turning length: 1,011 mm Travel: X/Y/Z: 695/300/1,077 mm B: -30° to +210° (0.0001°) Main spindle drive power: 22 kW Main spindle max. speed: 5,000 rpm Milling spindle Drive power: 24 kW Milling spindle max. speed: 12,000 rpm Tool Magazine 74 Tool Positions Capto C6 Preparation for Renishaw RMP60 Chip Conveyor, Right Discharge Automatic door Air blow-out on the milling spindle Mazak API Cylinder interpolation Overload Monitoring Max. program size: 8 MB G00 slope constant 5-Axis Simultaneous Machining Package for Smooth Ai EIA/ISO Function Simultaneous 5-Axes Tool Center PointControl/Simult.5-Axes Fine Spiline Interpolation (EIA) MT connect adapter Smooth synchronised tapping Robot Interface (Advance/Ethernet/IP)

This Impulse IP-175 Yamuna piston pump is designed for vertical and horizontal dewatering. These positive displacement pumps are self-priming and extremely suitable for unlimited pumping of a mixture of water and air. Moreover, this pump can run dry without any worries, without causing damage or wear to parts., , Can be supplied with any desired coupling/connection., , MAX: 95 m3 per hour, MAX: 22 MWK, , Several pieces in stock, , Throughput capacity: 95 m3/h, Motor brand: Hatz, Max. head: 22 MWK, Weight: 1950 kg, , = More information =, , General information, Year of manufacture: 2024, Applicable material: Water, , Weights, Empty weight: 1.950 kg, , Functional, Connector size: 4 Cardan, Cargo space capacity: 1.585 l, Quick coupler system: Yes, , Condition, Technical condition: very good, Visual appearance: very good, Damages: none, , Additional information, Please contact Gert-Jan Kruit ...

This Impulse IP-130 Brussel piston pump is designed for vertical and horizontal dewatering. These positive displacement pumps are self-priming and extremely suitable for pumping a mix of water and air without any restrictions. In addition, this pump can run dry without worry, without causing damage or wear to parts., , Can be supplied with any desired coupling/connection., , MAX: 42 m3 per hour, , MAX: 22 MWK, , Throughput capacity: 42 m3/h, Motor brand: Hatz, Max. head: 22 MWK, Weight: 1200 kg, , = More information =, , Year of manufacture: 2024, Applicable material: Water, Empty weight: 1.200 kg, Connector size: 4 Cardan, Cargo space capacity: 700 l, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Damages: none, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL u ...

BBA GHP 100 BBA high pressure pump. This BBA pump with high head is suitable for many applications. The powerful Perkins engine is built into a sound-dampened housing. Max. capacity 225 m3/h Max. Head 78 mwc. Available with any connection you require. Are you unsure whether this machine provides the desired working point for you? or you would like more information about delivery options. Do not hesitate to contact us, we are happy to assist you!, , Throughput capacity: 225 m3/h, Max dirt passage: 30 mm, Motor brand: PERKINS, Max. head: 95 MWK, Max dirt passag: 2300 rpm, Weight: 2650 kg, , = More information =, , Year of manufacture: 2007, Applicable material: Water, Empty weight: 4.000 kg, Cargo space capacity: 3.750 l, Technical condition: good, Visual appearance: good, Damages: none, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+3 ...

OTT Veneer press Heating plate size approx. 2.25m x 1.35m 4 lifting cylinders Weight approx. 4,000 to 4,500 kg incl. heating plates hydraulic Mod. Please make an appointment for a viewing in advance. G&-5103-o0691

existing pipes on the machine: COD91 - 3, 4M pipe, 50 pieces (200m), Engine/Type: John Deere 6068 HF 485, Power: 160 kW at 1500 rpm, Fuel: Diesel (tank capacity 600 liters), Compressor Type: Wabco, Max pressure:7.5 bar, Main winch cable Type: 19x7 swing arm, Diameter 6mm, Tensile strength 1960 N/mm2, Max pulling force 6 kN (600 kg), Tracked chassis Type:TG-12.0/SB1/600/11/3414, Length:3414mm, Width:2400 mm, Height:600 mm, Track width:600 mm, Swivel range:360°, Trolley cables Type: 6x36 WS + steel core, Diameter:14mm, Max load pull up:64 kN (6400 kg), Max load pull down :57.8 kN (5780 kg), (Main dimensions), Max length in transport position 8.65 m, Max width in transport position 2.50 m, Max height in transport position 3.10 m, Max working position length 7.88 m, Max working position width 2.50 m, Max height working position 9.79 m, Max turning radius 5.3 m, Spacing 2 outriggers for :198 ...

HAUSER S55 400 CNC coordinate grinding machine TECHNICAL FEATURES: Year: 2002 NC Type: FANUC 160i-M X-axis stroke: 1300 [mm] Maximum speed X-axis stroke: 1800 [mm/min] X-axis fast feed speed: 4000 [mm/min] Y-axis travel: 800 [mm] Maximum speed Y-axis travel: 1800 [mm/min] Y-axis fast feed speed: 4000 [mm/min] Z-axis travel: 170 [mm] Minimum speed. Z-axis travel: 0.500 [mm/min] Maximum speed Z-axis travel: 14000 [mm/min] Z-axis stroke frequency: max. 5 [Hz] W-axis travel: 635 [mm] W-axis fast feed speed: 1150 [mm/min] C-axis speed (planetary): 5 - 300 [rpm] U-axis stroke (radial advance): 5.5 [mm] Distance between columns: 970 [mm] Table length: 1440 [mm] Table width: 860 [mm] Maximum distance Spindle/table: 750 [mm] Maximum weight Tabletop Allowable: 800 [Kg] EQUIPMENT INCLUDED: x1 HI-CUT pack including: -protection of the work area -Exhaust device with  ...

OKUMA MULTUS U4000 1SW 1500 Mfg. Year 2016, Installed 2018 OSP P300S control Movements: X-axis: 695 mm Y-axis: 300 mm Z-axis: 1,600 mm W-axis: 1,554 mm B-axis: -30° to +210° max. turning diameter: 650 mm Big Bore main spindle 32/22 kW, spindle nose A2-11 Max. speed: 3,000 rpm Big Bore sub spindlel 32/22 kW, spindle nose A2-11 Max. speed: 3,000 rpm Milling spindle 22 kW, max. speed: 12,000 rpm Full B-axis Tool magazine for 80 tools High accuracy option C-axis on main and sub spindle Hydraulic steady rest, SMW Autoblok K4 - Clamping range: 30-245 mm Preparation for Multitool Renishaw System, RMP60 probe Renishaw TRS2 Tool Breakage detection swarf conveyor Mayfran MT10 20 bar high pressure pump API Library 2 One-Touch IGF Advance M-D Kit Helical turning function Z-axis automatic zero point offset by touch sensor main and sub spindle C-axis automatic zero offs ...

This BBA PT130 compact is built into a sound-damped housing with a lifting frame. Is self-priming, Electric starting. Equipped with Quick Couplings on the Press and Suction 4 V Part Cardan. The BBA PT-130 piston pump is designed for vertical and horizontal dewatering. These positive displacement pumps are self-priming and extremely suitable for pumping a mix of water and air without any restrictions. these pumps can run dry carefree, without causing damage or wear to parts., , Can be supplied with any desired coupling/connection., , If you are interested or have any questions, please feel free to contact us. Viewing and testing of the water pump is possible by appointment., , , MAX 30 m3 per hour, MAX : 20 MWK, , Throughput capacity: 30 m3/h, Motor brand: Hatz, Max. head: 20 MWK, Max dirt passag: 1500 rpm, Weight: 1500 kg, , = More information =, , Year of manufacture: 2007, Applicable m ...

This BBA PT130 compact is built into a sound-damped housing with a lifting frame. Is self-priming, Electric starting. Equipped with Quick Couplings on the Press and Suction 4 V Part Cardan. The BBA PT-130 piston pump is designed for vertical and horizontal dewatering. These positive displacement pumps are self-priming and extremely suitable for pumping a mix of water and air without any restrictions. these pumps can run dry carefree, without causing damage or wear to parts., , Can be supplied with any desired coupling/connection., , If you are interested or have any questions, please feel free to contact us. Viewing and testing of the water pump is possible by appointment., , , MAX 30 m3 per hour, MAX : 20 MWK, , Throughput capacity: 30 m3/h, Motor brand: Hatz, Max. head: 20 MWK, Max dirt passag: 1500 rpm, Weight: 1500 kg, , = More information =, , Year of manufacture: 2007, Applicable m ...

We have several of these machines in stock, with div hours and years., Directly available!, , , The pumps from the BA series are designed with the, emphasis on reliability, durability and, efficiency. Thanks to their fully mechanical, vacuum system, these pumps prime quickly even, without liquid in the pump housing. Due to the heavy, construction of both the pump and the casing make, the pumps of the BA series are ideal for use in the, contracting and rental market., , Throughput capacity: 135 m3/h, Max dirt passage: 82 mm, Motor brand: HATZ 1D81z, Max. head: 18 MWK, Max dirt passag: 1500 rpm, Weight: 1100 kg, , = More information =, , Year of manufacture: 2008, Empty weight: 1.100 kg, Connector size: 4 inch, Quick coupler system: Yes, Technical condition: good, Visual appearance: good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+ ...

working area: 960 x 610 mm laser capacity in Watt: 30 W connected load frequency: 230 V We are offering a used Polar DigiCut ECO from 2015 incl. suction unit (AirMex) This is fully functional and technically checked, but shows minor signs of use (in contrast to our demonstration machines). You can also find our demonstration machines on our homepage. About the DigiCut ECO: For cutting, grooving, perforating and engraving a wide range of materials. The operator uses a four-line display to select the relevant job on the Digicut eco. the Digicut eco. The adjustments required for processing, such as intensity and speed of the laser, are defined in advance by color-specific settings in the printer driver. settings in the printer driver. On the user side, a vector-oriented graphics program such as CorelDraw, Adobe Illustrator, etc. is required. Incl. accessories such as honeycomb table, wast ...

Used presetter Int. Art. Ref. m3541 Manufacturer Precitool Type Preci Set 600 Year of construction 2006 x 200 mm Z 600 mm With DYMO Label Printer With a total of 4 adapters Item location: 59425 Unna The machine can be viewed under power. A forklift for loading is available. Prior sale is reserved. It is possible to professionally examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition, is non-binding and has been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold from the location / warehouse, with a transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, trader ...

Key data: 45 °, 2800 mm, 1250 mm

Used sliding table saw Int. Art. Ref. m3538 Manufacturer: Altendorf Type F 45 Year of manufacture 1978 Carriage length 2.80 m Cutting width 1.25 m Weight approx. 800 kg Mitre angle Item location: 59425 Unna The machine can be viewed under power. A forklift for loading is available. Prior sale is reserved. It is possible to professionally examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition, is non-binding and has been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold from the location / warehouse, with a transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at trade ...

Description: Grinding wheel : - Ø Ext : 508 mm - Width : 610 mm Regulating wheel : - Ø Ext : 330 mm - Width: 610 mm - Working in-feed - Plunge work advance CNC motor 0.001 Equipped with : - 1 Electrical cabinet with SIEMENS PLC - 1 CNC plunge on the working wheel - 1 CNC motor on the control wheel - 1 External lubrication pump tank - 2 Hydraulic diamond cutters - 1 Ruler holder for working in a row Stock N° : EX832 weight approx.: 8,500 kg, Approx. Onsite Dimension. (l x w x h): 4,800 x 2,100 x 1,700 mm

Description: Grinding wheel : - Ø Ext : 508 mm - Width : 610 mm Regulating wheel : - Ø Ext : 330 mm - Width: 610 mm - Working in-feed - Plunge work advance CNC motor 0.001 Equipped with : - 1 Electrical cabinet with SIEMENS PLC - 1 CNC plunge on the working wheel - 1 CNC motor on the control wheel - 1 External lubrication pump tank - 2 Hydraulic diamond cutters - 1 Ruler holder for working in a row Stock N° : EX842 weight approx.: 8,500 kg, Approx. Onsite Dimension. (l x w x h): 4,800 x 2,100 x 1,700 mm

grinding diameter:630 mm grinding length:2000 mm centre height:320 mm table speed -stepless-:0,005-5 m/min min/max. table longitudinal travel:5/ 3350 mm table speeds:8 m/min grinding spindle- cross travel:420 mm workpiece-spindlehead motor:3,0 kW output of wheelhead motor:22 kW motor internal grinding:3 kW lubrication pump motor:0,11 kW weight of the machine ca.:15700 kg dimensions of the machine ca.:H1970/B3100/L12650 mm 40 % advance payment, by order confirmation 60 % before loading the machine warranty: 12 month one general overhauled cylindrical grinding machine, make TOS, type BUT/BUC 63 x 2.000, year of production with new 2-axis CNC Teach In control K 51/2 or alternatively Siemens Sinumerik 840 D. Our general overhauling includes: regrinding and scraping of all guide ways including lower and upper side of the table. Replacement of all main components. Complete new electric includi ...

grinding diameter:630 mm grinding length:2000 oder 3000 mm centre height:320 mm table speed -stepless-:0,005-5 m/min min/max. table longitudinal travel:5/ 3350 mm table speeds:8 m/min grinding spindle- cross travel:420 mm workpiece-spindlehead motor:3,0 kW output of wheelhead motor:22 kW motor internal grinding:3 kW lubrication pump motor:0,11 kW weight of the machine ca.:15700 kg dimensions of the machine ca.:H1970/B3100/L12650 mm 40 % advance payment, by order confirmation 60 % before loading the machine warranty: 12 month one general overhauled cylindrical grinding machine, make TOS, type BUT/BUC 63 x 3000 with new 2-axis CNC Teach In control K 51/2 or alternatively Siemens Sinumerik 840 D. Our general overhauling includes: regrinding and scraping of all guide ways including lower and upper side of the table. Replacement of all main components. Complete new electric including cabinet  ...

grinding diameter:630 mm grinding length:2000 mm centre height:320 mm max. workpiece weight:2500 kg swing diameter in open bench rest:40-150 mm taper in tailstock:6 MK table swivelabel +/-:6°30' ° work piece spindle speed:8-50, 50-315 (2 Bereiche) U/min grinding wheel speed:33 m/sec output of wheelhead motor:15 kW workpiece-spindlehead motor:3,0 kW total power requirement:31 kW weight of the machine ca.:12400 kg open type steady rest:2 (schwer) Stück steady fixed:2 Stück grinding wheel flange:2 Stück technical documentation:in deutscher Sprache 40 % advance payment, by order confirmation 60 % before loading the machine warranty: 12 month one general overhauled cylindrical grinding machine, make TOS, type BUT/BUC 63 x 2.000, year of production with new 2-axis CNC Teach In control K 51/2 or alternatively Siemens Sinumerik 840 D. Our general overhauling includes: regrinding and scrapi ...

autom. boring machine Brand: VITAP Type: SIGMA B1 New machine technical detail: - 2800 mm working table - PLC and touch screen - 2 horizontal boring heads with 21 spindles each prepared for quick chucks - 2 motors each 1,5 kW - the right horizontal boring head is movable with the possibility to pass over the vertical boring groups and fitted on prismatic guide with ball bushes and electronic digital indicator. - Digital position indicators for height regulation of the horizontal boring heads - 2 pneumatic stops - changing horizontal/vertical drilling circuit - Belt conveyors fitted on springs sliding on prismatic guide with ball bushes - Front and side pneumatic pushers - Security on line circuit - 700 mm Infeed conveyor - Horizontal movement of the right head by ball bushes guide with electronic digital indicator - Standard accessories - CE standards Dust ...

Year of manufacture: 2021, Colour: Yellow, Technical condition: very good, Visual appearance: very good, Damages: none, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fittings. A physical visit to our location is very well possible! Make your visit known in advance to avoid disappointment. Visit : from Monday to Friday from 08.00 to 17.00 on Saturdays or in the evenings by appointment.

Contents 2m3, with 2 removable baffles and removable lid. Lifting eyes and forklift insert Weight approximately 140kg, fully galvanized. Can also be used as an oil/grease separator., New and unused. several pieces in stock, inquire about the current stock!, , = More information =, , Year of manufacture: 2022, Make of bodywork: VTT 2m3 Zandvangbak buffel tank 2m3 inhoud, Technical condition: very good, Visual appearance: very good, Damages: none, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fittings. A physical visit to our location is very well possible! Make your visit known in advance to avoid disappointment. Visit : from Monday to Friday from 08.00 to 17.00 on Saturdays or in the ...

The Selwood S150 dirty water pump features a special vortex-flow design, automatic self-priming. Its large dirt passage makes it ideal for heavy-duty work. Bentonite, heavy sandy water and sewage applications are no problem for this powerhouse!, , Throughput capacity: 320 m3/h, Max dirt passage: 100 mm, Motor brand: ISUSU, Max. head: 27 MWK, Max dirt passag: 1800 rpm, Weight: 1900 kg, , = More information =, , Type: Centrifugal pump, Year of manufacture: 2011, Empty weight: 1.900 kg, Connector size: 6 Inch, Quick coupler system: Yes, Technical condition: good, Visual appearance: good, Damages: none, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for yo ...