advance used for sale

Brand: KUKA Model: KR210 Year: 2004 Access Range: 2700mm Loading Capacity: 210kg Status: USED and TESTED Includes: KR210 Manipulator, KRC2 Controller Panel, KCP2 Teach Pendant, Wire Sets Payment Conditions: %100 advance payment before shipping. Shipping, shipping insurance, customs fess and VAT are not included to price.

Brand: YASKAWA Model: YR-UP165-A30 Year: 2000 Access Range: 2650mm Loading Capacity: 100kg Status: USED and NOT TESTED Includes: YR-UP165-A30 Manipulator, XRC Controller Panel Warranty: 1 month valid for spare parts Payment Conditions: %100 advance payment before shipping. Shipping, shipping insurance, customs fess and VAT are not included to price.

Heraeus Vötsch Climate Test Chamber Here we offer you Heraeus Vötsch climate test chamber. Temperature Climate Test Chamber Air Cooled Standard: Touch panel and independent, adjustable temperature limiter 32 Bit S! MPAC control with touch panel Potential-free contact for test material shutdown Independent, adjustable temperature limiter tmin/tmax Psychrometric humidity measurement system Interface TCP/IP 1 pipe feedthrough 50 mm Refrigeration circuit air-cooled Coolant R23 & R404A Temperature range -70 to +180°C Temperature deviation over time ±0.3 to ±1.0 K Temperature homogeneity spatially ±0.5 to ±2.0 K Change speed heating 3.5 K/min Change speed cooling 2.5 K/min Services for climate tests: Humidity range 10 to 98% Test room dimensions: Width 470 mm Depth 345 mm Height 400 mm External dimensions: width 760 mm depth  ...

Vötsch Emission Test Chamber Here we offer you a Vötsch emission test chamber. Vötsch Emission Test Chamber Water Cooled Test room volume 1000 liters (usable) (916) liters Adjustment container 480 liters Services for temperature tests: Temperature range +20°C to +130°C Temperature deviation temporally K ±0.1 to ±0.3 Temperature deviation spatially K ±0.5 Temperature gradient K 1 Temperature change rate: Cooling K/min 0.3 Heating K/min 0.4 Services for climate tests: Carrier gas conditioning with climate module according to the evaporation principle Temperature range +20°C to +130°C Humidity range 5 to 95% Dew point range +5°C to +60°C Moisture deviation over time % ±1 to ±3 Carrier gas exchange rate 0.1 to 1.8 chamber volume per hour Power range for desorption Desorption temperature up to max. +240°C, adjustable Test room surface temperature betwe ...

Heraeus Vötsch Temperature Test Chamber Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Tester Water Cooled Designation VTS 7150-5-S Performance data: With temperature change rate of 5 K/min Test room dimensions Height 950 mm Width 1100 mm Depth 1475 mm External dimensions Height 2000 mm Width 1415 mm Depth 2566 mm Temperature range -70°C to + 180°C Temperature deviation in time ± 0.1 to ± 0.5 Temperature homogeneity spatially ± 0.5 to ± 2.0 Temperature change rate cooling 5.0 K/min Temperature change rate heating 6.0 K/min Heat compensation 5000 W Test volume: 1540 liters 2x lateral ∅ 125 cm 1x lateral ∅ 50 cm Cabinet is water-cooled Electrical connector: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 30 KW Rated current: 55.0 A Refrigerant: R 404A and R 23 Weight: approx. 1300 kg net Type: VTS 7150-5-S  ...

Year of manufacture: 2021, Connector size: 6 Perrot Cardan, Technical condition: very good, Visual appearance: very good, Damages: none, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fittings. A physical visit to our location is very well possible! Make your visit known in advance to avoid disappointment. Visit : from Monday to Friday from 08.00 to 17.00 on Saturdays or in the evenings by appointment.

cutting diameter: 350 mm saw band length: 4160 mm cutting width: 400 mm : 350 mm : 350 x 350 mm Capacity 90° rectangular: 400 x 350 mm speed: 20 -100 m/min main drive: 2,2 kW hydraulic pump: 0,37 kW coolant pump: 0,12 kW dimensions of saw-band: 4160 x 34 x 1,1 mm work height max.: 860 mm total power requirement: 2,9 kW weight of the machine ca.: 1030 kg dimensions of the machine ca.: 2,23 x 0,88 x 1,89 m Description: • Fully automatic miter band saw for sawing thick-walled Profiles and solid materials • Motorized roll feed of the material with electrical contact stop • Delta touch screen controls • Miter cutting, up to 45 ° • 1 program with 10 steps • Length accuracy 0.5 mm The feed length of the material is manually adjustable via an Microswitches selected that • Robustly constructed monoblock saw frame with hydraulic vertical movement and linear guide • Rapid advanc ...

Used Autoclave PANZER, Type: 340E -Refurbished- Year of construction: 2016 Electric autoclave with 340 litre boiler volume, reinforced quick-release fastener and threaded spindle - Made in Germany For sterilizing, pasteurizing, preserving, cooking, curing and maturing. The complete heating, ALL wear parts, lid seal, safety valve, pressure gauge and the control system are renewed. All safety equipment is brought up to date (requirement of the Pressure Vessel Ordinance) - electrically heated - made of high-quality stainless steel - Lid with quick-release fastener - Construction inspection and pressure test by TÜV included - Incl. all required certificates - Fully automatic. Control by F-value controller - Fully automatic. Control of operating temperature, core temperature, preselection and operating time clock (side right) - Boiler capacity: 340 liters - Operating pres ...

CTS Temperature Test Chamber Here we offer you a CTS temperature test chamber. Water-cooled Type series: CTS T-30/920/S Test room volume: 920 liters Test room dimensions: D x W x H 820 x 850 x 1340 mm Overall dimensions: D x W x H 1870 x 1200 x 2400 mm Temperature working range: Temperature range -30(Tested to -35) to +180°C Heating speed: 2.5 K/min Cooling speed: 2.8 K/min Electrical connection 400 V 3/N, 50 Hz Rated power: approx. 7.3kW Rated current: approx. 12.5 A Refrigerant: R404A Weight: 770 Kg Type: T-30/920/S For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful verification, the chambers are subjected to a test run, which is monitored with cal ...

Vötsch Temperature Test Chamber Here we offer you a Heraeus Vötsch temperature test chamber. Water-cooled Vötsch Temperature Test Chamber VTS 7027-20 Temperature range: -70°C to +180°C Temperature change rate: Temperature deviation in time ± 0.3 to ± 0.8 K Temperature deviation ± 0.5 to ± 2.0 K Change speed Cooling 20 K/min Change speed heating 20 K/min External dimensions: Width 780 x Depth 1895 Height 1900 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 20 kW Rated current 36 A Refrigerant R404A / R23 Climate test: Temperature range +10 to +95 Humidity range 10 to 98 % approx. 270 litres weight: 950 kg Type: VTS 7027-20 For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally comp ...

Year of manufacture: 2021, Length: 600 cm, Technical condition: very good, Visual appearance: very good, Damages: none, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fittings. A physical visit to our location is very well possible! Make your visit known in advance to avoid disappointment. Visit : from Monday to Friday from 08.00 to 17.00 on Saturdays or in the evenings by appointment.

Philips Diagnost H with the following device components Generator Medio 65 CP-H Tube SRO 2550 0.6/1.0 (ceiling hanging) Vertical tripod Diagnost 1 + Swivel tripod trauma diagnosis • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally railed and with Stretch film wrapped and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full Functionality without guarantee. • The installation and configuration of the system or plant components must be completed by a specialist authorised by the manufacturer or technicians! If  ...

The "Epoch TM" extrusion casting apparatus (wide slot nozzle) has been designed and constructed for the thermoforming of polypropylene (heavy films). Operating fluids PA12, PP For other materials, contact must be made in advance with the manufacturer in order to check the processability. Specifications: Weight 839 kg. ; Power supply 230 V; number of zones cast body 14; Encapsulation block 2; KW total: cast body 21.9 KW; Auto Gauge 730 KW; Cast lip heating 3.4 KW; Additional equipment: internal edge boundaries with fixed length

Pausch recording workstation Compact CS 2000 with the following device components: Generator Editor Hfe 501 Tube RAD 21 0.6/1.2 Varian Vertical tripod BS 2000 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally railed and with Stretch film wrapped and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full Functionality without guarantee. • The installation and configuration of the system or plant components must be completed by a specialist authorised by the manufacturer or technicians!

Used dressing Int. Kind. Ref. m3217 Manufacturer Hofmann Type unknown Planing width 510 mm 4-knife shaft Weight approx. 800 kg Item location: 58730 Fröndenberg/Ruhr The machine can be visited. We will be happy to send you further photos by e-mail. A forklift/crane for loading is available. Prior sale is reserved. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data.B, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with transfer of risk to the buyer, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, deale ...

GE Mammography Device Senographe DMR+ with the following device components: Tube Maxiray 70 T.2 0,1/0,3 Table top 18x24 and 24x30 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation and configuration of the system or the system components must be carried out by a specialist or technician authorized by the manufacturer!

Vario - Snow removal blade Samasz PSV 301. Universally hydraulically adjustable blade – wedge plough or side clearer left-right use possible. Working width max./min. 303/262 cm, blade height 80/98 cm, rubber skirting strips, special equipment: training wheel set, plough lighting, electric 12 volt cable remote control for light and hydraulic control block. 1 hydraulic connection dw required. Weight approx. 480 kg. Almost new condition. Further snow removal blades, snow blowers and slingshots as well as spreading technology in stock - see also sample photos! Info and offers on request. No sending of package deals or lists. Please name and phone no. for queries. Please let us advise you in advance by phone. Appointment required for viewing!

Planmed mammography device Nuance Excel - digital with the following device components: Tube M113 A Varian 0,1/0,3 1x Detector Flex AEC Radiation protection wall + 2. Device with tube and detector as spare parts dispenser • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation and configuration of the system or the system components must be carried out by a specialist or technician authoriz ...

Flail mulcher for three-point attachment (rear or front) Cat. II, PTO drive 540 rpm, gearbox with freewheel, hydraulic side displacement approx. 350 mm, working width 240 cm, 34 hammer mallets. Further flail mulchers, also laying mowers and other mowing technology in stock - see example photos! Info and offers on request. No sending of package deals or lists. Please name and phone no. for queries. Please let us advise you in advance by phone. Appointment required for viewing!

ORDER NO. 6524 TECHNICAL DATA - track width 360mm - shaft width 350mm - max disc diameter 350mm - disc bore diameter 80mm - max cutting height 120mm - table top size 2040x840mm in advance: - ratchets - pulling shaft, toothed - ratchets - smooth sliding shaft - shaft with saws - slip shaft, pressure shaft bottom: - 2 rolls in front of the table top - guide - ratchets - caterpillar - central lubrication of the track - electric shaft lifting with saws 0.55kW - electric body lifting 0,55kW - smooth regulation of the feed speed - diameter of the extraction connection 140,125mm - main motor 45kW - overall dimensions L/W/H 3530x2220x2200mm - weight about 4000kg ADVANTAGES – Czech production – 2 slip rollers in the countertop – used multisaw – very good condition Net price: 62900 PLN Net price: 13978 EUR depending on the price 4,50 EUR  ...

AGFA Soeicherfoliensystem (CR System) ADC Solo MUSICA Computer TFT LCD Monitor Model No. B18XA_Bj. 2001 • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

New Deutz BF4M1013EC. This engine has been converted into various machines if you are looking, we have it this Deutz BF4M1013EC. If this is not the type you are looking for, please do not hesitate to contact us. We have the possibility to supply various types of Deutz engines new, used or overhauled with appropriate software and in the configuration according to the engine number specified by you. Feel free to contact us to discuss things with each other., , = More information =, , Year of manufacture: 2022, Model year: 2022, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Damages: none, VAT/margin: VAT qualifying, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , co ...

Carestream (Kodak) Storage Film System Elite as Spare Parts Dispenser First processing station consisting of computer/monitor/keyboard/mouse and software 2. Workstation 5 Kodak CR cassettes PQ: 35x43 - 2 pcs./ 35x35 - 1 pcs./ 24x30 - 1 pcs./ 18x24 - 1 pcs. Barcode scanner UPS Emergency Power • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technici ...

IMS Mammography Giotto Image with the following device components: Tube Varian M-113 SP 0.1/0.3_Bj. 2002 Table top 18x24 and 24x30 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and with Stretch film wrapped and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full Functionality without guarantee. • The installation and configuration of the system or plant components must be carried out by a specialist authorised by the manufacturer or technicians!

Technical data Cut range: round 90° full: 25 mm Saw blade diameter: 100 mm Max. saw blade diameter: 100 mm Cut range: round max. tube: 25 mm Cut length:: 1 - 160 mm Saw blade size: central bore: 20 mm Max. automatic advance length: 500 mm Speeds: up to: 6000 rpm Voltage 50 Hz 3x: 380 Volt Power: 1.5 kW Machine´s weight about: 360 kg Overall dimensions machine: Length: 1300 mm Width: 650 mm Height: 1550 mm Various accessories: Automatic forward feed Hydraulic vice Material bearing lenght

ORDER NO. 6591 TECHNICAL DATA - track width 450mm - shaft width 450mm - disc bore diameter 80mm - shaft diameter 60mm - min dial diameter 300mm - max dial diameter 400mm - max cutting height 250mm - max width of input material 860mm - min length of the workpiece 800mm in advance: - repellers - pulling shaft, metal pressed pneumatically - repellers - pulling shaft, metal, pneumatically pressed - pressure - shaft with saws - pressure - 2 pulling shafts, metal pressed pneumatically bottom: - metal roller, slip roller - guide - repellers - caterpillar - shaft with saws - caterpillar - smooth adjustment of the feed speed on the inverter 4-40m/min - main motors 2x75kW - feed motor about 3kW - electric body lift up/down 0.55kW - electric shaft adjustment with saws 2×0.18kW - central lubrication - diameter of the extraction connection 2x300mm  ...

Technical data Max. work-piece height: 80 mm Number of grinding heads: 2 Arrangement: horizontal Work-piece driving plate: Grinding wheel: outside diameter: 300 mm inside diameter: 233 mm Width / height: 50 mm Grinding wheel speeds: from: 1530 rpm up to: 24 m/s Work-piece advance: Speed of the work-piece driving plate:: 29.6 - 192 mm/s Voltage: 380 Volt Machine´s weight about: 2500 kg Overall dimensions machine: Length: 3050 mm Width: 1400 mm Height: 1600 mm Various accessories: Measuring instrument: PRETEC Workpiece loader

Technical data Number of spindles: 6 Capacity round bar: 26 mm Max. advance of bar: 80 mm Max. turning length: 39.6 mm Max. stroke of long slide: 63 / 39.6 mm Number of possible pieces: 31 Machining rate: from: 0.36 sec up to: 95 sec Spindle speeds: from: 355 rpm up to: 5000 rpm Voltage 50 Hz 3x: 380 Volt Power: 15 kW Machine´s weight about: 4000 kg Overall dimensions machine: Length: 3125 mm Width: 1030 mm Height: 2000 mm Various accessories: Automatic bar loader (num. bars): IEMCA PRA 40/33P Coolant system Thread rolling attachment: 1 x Longitudinal slide number: 2 Drilling unit with independent feed: 6 x Appareil à rouler les filêts à commande mécanique Tool break control Turret number of tools: 6 x Threading attachment: tangent.

Technical data Number of spindles: 6 Capacity round bar: 13 mm Max. advance of bar: 63 (125) mm Max. stroke of long slide: 50/31.5 mm Machining rate: from: 0.24 sec up to: 75 sec Spindle speeds: number (steps): 47 from: 560 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Power: 15 kW Machine´s weight about: 3400 kg Overall dimensions machine: Length: 3055 (5161) mm Width: 930 mm Height: 2500 mm Various accessories: Bar feeder Set of toolholders Chip conveyor

1 used pallet rack longitudinal truss shelf Make: SLP Type: SL20 Year of construction: 2016/ Extension 2019 -789 pieces of stand frame; Frame height: approx. 6,150-7,150 mm; Frame depth: 1,100 mm screwed truss; Profile: 100 mm; Material colour: blue Field load: 12,000 kg -208 pieces of trusses; Traverse length: 3,600 mm;Material colour: orange -5,300 traverses; Traverse length: 2,700 mm;Profile: 125 x 50 mm; Material colour: orange -96 pieces of trusses; Truss length: 1,800 mm;Material colour: orange with safety hook Construction can be individually designed. The dismantled system is in our warehouse in Eitorf Transport and assembly can be offered separately. The offered price is for self-collection in Eitorf The material can be viewed in advance. Price on request

Technical data Number of spindles: 6 Capacity round bar: 20 mm Capacity square bar: 14 mm Capacity hexagon bar: 17 mm Max. advance of bar: 80 mm Max. turning length: 39.6 mm Max. stroke of long slide: 63 / 39.6 mm Number of possible pieces: 31 Machining rate: from: 0.36 sec up to: 95 sec Spindle speeds: stepless from: 355 rpm up to: 5000 rpm Voltage 50 Hz 3x: 380 Volt Power: 15 kW Machine´s weight about: 4000 kg Overall dimensions machine: Length: 3125 mm Width: 1030 mm Height: 2000 mm Various accessories: Coolant system Chip conveyor

Technical data Number of spindles: 6 Capacity round bar: 20 mm Capacity square bar: 14 mm Capacity hexagon bar: 17 mm Max. advance of bar: 80 mm Max. turning length: 39.6 mm Max. stroke of long slide: 63 / 39.6 mm Number of possible pieces: 31 Machining rate: from: 0.36 sec up to: 95 sec Spindle speeds: stepless from: 355 rpm up to: 5000 rpm Voltage 50 Hz 3x: 380 Volt Power: 15 kW Machine´s weight about: 4000 kg Overall dimensions machine: Length: 3125 mm Width: 1030 mm Height: 2000 mm Various accessories: Bar feeder: CUCCI Threading attachment: OERTLINGHAUS Coolant system Chip conveyor: KNOLL Toolholders

New Deutz TCD2012L042V this engine has been converted into various machines if you are looking we have it this Deutz TCD2012L042V. If this is not the type you are looking for, please do not hesitate to contact us. We have the possibility to supply various types of Deutz engines new, used or overhauled with appropriate software and in the configuration according to the engine number specified by you. Feel free to contact us to discuss things with each other., , = More information =, , Year of manufacture: 2021, Model year: 2021, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Damages: none, VAT/margin: VAT qualifying, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses ,  ...

New Volvo TAD720VE this engine has been rebuilt in various machines if you are looking for we have it standing this Volvo TAD720VE. If this is not the type you are looking for, please feel free to contact us. We have the possibility to deliver various types of Volvo engines newly used or overhauled with appropriate software and in the configuration according to the engine number you specified., , = More information =, , Year of manufacture: 2021, Model year: 2021, Colour: Green, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Damages: none, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fittings. A physical visit to our location is very well p ...

Year of manufacture: 2021, Model year: 2021, Colour: Green, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Damages: none, VAT/margin: VAT qualifying, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fittings. A physical visit to our location is very well possible! Make your visit known in advance to avoid disappointment. Visit : from Monday to Friday from 08.00 to 17.00 on Saturdays or in the evenings by appointment.

New Deutz TCD 2012L064V this engine has been converted into various machines if you are looking we have it., TCD 2012L064V 152 KW -- 203 HP 2100 rpm., If you are looking for another Deutz engine, please do not hesitate to contact us., We supply any desired type of Deutz engine new, used or overhauled., With appropriate software and in the configuration according to the engine number you specified., , = More information =, , Year of manufacture: 2022, Model year: 2020, Colour: Grey, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Damages: none, VAT/margin: VAT qualifying, Type number: Exchange, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fit ...

Protec Optimax • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

New Deutz TCD2012L042V this engine has been converted into various machines if you are looking we have it this Deutz TCD2012L042V. If this is not the type you are looking for, please do not hesitate to contact us. We have the possibility to supply various types of Deutz engines new, used or overhauled with appropriate software and in the configuration according to the engine number specified by you. Feel free to contact us to discuss things with each other., , = More information =, , Year of manufacture: 2022, Model year: 2021, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Damages: none, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fitting ...

Part Number 6338 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 160mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 160mm 5,5kW 3) vertical left 160mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 7,5kW 6) horizontal bottom 230mm 7,5kW 7) universal 360° 230mm 7,5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - all spindles equipped with a brake - spindle speed 6000rpm in advance: - 6 pulling, toothed, metal introductory shafts, including 2 double - 4 pulling shafts, rubber including 1 double - 3 clamps on the lead bottom: - pressure from the side on the inlet - introductory shaft, toothed, pulling, swivel in the lower table top - 3 pull rollers, metal, smooth - pneumatically adjustable shafts - length of the introductory table top 1190mm - central lubricati ...

Part Number 6393 TECHNICAL DATA - max width of the workpiece 200mm - max height of the workpiece 150mm - number of spindles 4: 1) horizontal bottom 200mm 5,5kW 2) vertical right 150mm 4kW 3) vertical left 150mm 4kW 4) horizontal upper 200mm 5,5kW - all heads adjustable up/down, right left - spindle diameter 40mm - spindle speed 6000rpm in advance: - pulling introductory shafts, toothed 6 pcs including 2 double - 1 pulling shaft, rubber bottom: - introductory shaft toothed, pulling, torsional in the lower table top - side pressure 3pcs - lead roller, pulling, metal, smooth - all pneumatically pressed rollers - length of the introductory table top 2130mm - table top adjustable up / down - central lubrication - electrical setting of planing thickness - lifting motor 1,1kW - smooth regulation of the feed speed on the inverter - feed motor 3kW - feed  ...

AGFA Storage Film System (CR) CR 85-X (mammogenic) with: First Processing Station 6 AGFA CR MM 3.0 Mammo cassettes: 18x24 - 2 pcs./ 24x30 - 4 pcs. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Part Number 6291 TECHNICAL DATA - max width of the workpiece 1350mm - max height of the workpiece 100mm 3 aggregates: 1) transverse aggregate with pneumatically pressed shoe 13/17kW 2) combo unit (2 rolls) with pneumatically pressed shoe 13/17kW 3) combo unit (2 rolls) with pneumatically pressed shoe 13/17kW in advance: - rubber pressure roller - sequential shoe - aggregate - rubber pressure roller - aggregate - rubber pressure roller - aggregate - slip rubber roller, pressure roller - cleaning brush 1,5kW bottom: - slip roller - 5 segment feed tape with vacuum pump - pump motor 7,5kW - feed speed adjustable by 4kW geared motor - feed speed 5-26m/min - oscillation of pneumatic tapes on photocells - blowing of feeding belts - all units equipped with a sanding belt cleaning system - lifting the electric table - lifting motor about 0,55kW - de ...

Konica Minolta Storage Film System (CR) Regius 190 (mammogenic) with: First Processing Station • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Baler Presto CC 20 M, year of construction 2016, pressing force 20 t Specifications: Manufacturer: Presto Type: CC 20 M Year of construction: 2016 Pressing force: 20 t Cycle time: 24 s Drive power: 7.5 kW Filling opening: 1030 x 750 mm Binding: 3-fold Throughput at bulk density of 35 kg/m³ - 1.6 t 60 kg/m³ - 2,3 t 100 kg/m³ - 2,8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: ca. 2500 kg Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment takes place ex works, without guarantee and guarantee.

Catalog No. 6809 TECHNICAL DATA - track width 350mm - roller width 370mm - max cutting height 200mm - max disc diameter 300mm - disc hole diameter 80mm in advance: - repellants - pressing sliding shaft - repellants - 2 smooth sliding shafts - repellants - shaft with saws 75kW - 3 smooth sliding shafts - repellants - smooth sliding shaft from down: - sliding roller - repellants - caterpillar - shaft with saws 95kW - caterpillar - 1 output shaft, toothed, pulling - rollers pressed pneumatically - max disc diameter 300mm - electric lifting of the upper body up/down 1.1 kW - automatic central lubrication - smooth adjustment of the feed speed 3kW - diameter of the exhaust connection 190mm, 200mm - feeding table with guide and pneumatic clamp rolls in the feeder: - 1 sliding, 9 pulling - dimensions of the feeder length / width / height 6520x1300x1050mm - dim ...

Drill stand Manufacturer Neuhauser Type Connector 12S1 Year of construction 1999 Table size approx. 1 m x 0.50 m Total height approx. 1.80 m Holder approx. 42-43 mm The drill is not one of them Arm can be swivelled on both sides Item location: 58730 Fröndenberg/Ruhr The machine can be visited and tried out. A forklift/crane for loading is available. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. ...

Used notching milling machine Manufacturer: ROTOX Type: SAF 163 Ma. No. 163093 built 1978 Power 2,2 kW Item location: 58730 Fröndenberg/Ruhr The machine can be visited. We will be happy to send you more photos by e-mail. A forklift/crane for loading is available. We reserve the right to prior sale. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, traders and leg ...

Siemens Multix FD with the following system components: Generator Polydoros LX 30/50 Lite Tube Opti 150/30/50 HC 0,6/1,0_Baujahr 06/19 Vertical tripod Vertix FD 2x Detector Trixel Pixium 4600 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation and configuration of the system or the system components must be carried out by a specialist or technician authorized by the manufacturer!

ORDER NO. 6556 TECHNICAL DATA - max width of the workpiece 1100mm - max height of the workpiece 160mm 2 aggregates: 1) corrugated rubber roller for calibration 2) pneumatic shoe +2 metal rollers in advance: - 2 rollers, metal, slip - pressure - aggregate - 2 slip metal rollers - aggregate - 2 rollers, metal, slip - cleaning brush bottom: - 2 rubber rollers, slip rollers - pulling tape - oscillation of pneumatic tapes on photocells - lifting the electric table - 2 types of feed speed - working pressure 8-10bar - diameter of the extraction connection 2x200mm - total power 30kW - overall dimensions L/W/H 2230x2020x2050mm - weight about 3000kg Net price: 25900 PLN Net price: 5756 EUR depending on the price 4,50 EUR (Prices are subject to change with higher fluctuations)

New Deutz BF4M1013EC. This engine has been converted into various machines if you are looking, we have it this Deutz BF4M1013EC. If this is not the type you are looking for, please do not hesitate to contact us. We have the possibility to supply various types of Deutz engines new, used or overhauled with appropriate software and in the configuration according to the engine number specified by you. Feel free to contact us to discuss things with each other., , = More information =, , Year of manufacture: 2022, Model year: 2022, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Damages: none, VAT/margin: VAT qualifying, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , co ...