We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,316 used machines on RESALE, but how to find them? Machine Search
used
Filling monoblock AXTRA isobaric Year: 2016. Speed: 300 bph sul 0.5 lt. Direction: Linear. Model: SA/L-G5/L-IV5/L-C1-CW/L-T1. 5 filling electro-pneumatic valves 5 rinsing nozzles Double pre-evacuation Corker – Crown cap 26 and 29mm. Adhesive labeller. Front and back label. Hot foil printer Capsuling machine PVC Safety protections.
used
Monoblock AXTRA 7.1 – BEER Year: 2018 Speed: 1.000 BPH - 330 ml 500 BPH - 750 ml Labeller: Nr1. adhesive station. (it can apply wrap-around or front and back label) Filler 7 valves – low vacuum Corker single head – 26mm and 29 mm crown cap. Safety protections.
used
Labeler prepared for 3x adhesive labels with hot melt (front/back/safety tab). The labeller was overhauled in 2021 by the manufacturer Gernep, including new electrics according to CE standard. The labeller is equipped for the glass type DTO80. The labeller was in operation for about 200 hours after the overhaul.
used
Monoblock Labeller | Capsuler GAI Year: 2004 Speed: 2.500 bph Direction: Clockwise Model: 6030 Nr. 3 adhesive stations Suitable for pvc and polylaminate capsules Formats: 0.75 lt series xv glass special, 0.75 lt Safety protections
used
Mobile semi-automatic taping machine which seals fixed-format boxes with adhesive tape (upper and lower parts). Output: 1000 boxes/h.
used
Condition: like new, never used MatrixCompactor 140 All-in-one Units are designed to capture, convey, cut, collect and compact adhesive matrix and edge trim waste from all process machines. They can handle matrix and edge trim from 1 process machine and if edge trim only up to 4 process machines. Configuration of Granulator(s) is customised to the material and number of process machines. Maximum width of matrix Up to 550mm (22") Maximum air capacity 1,600 m³ / hour (940 CFM) Maximum speed 150 m / min (490 FPM) Maximum pipe size Dia. 160 mm (6") transfer Maximum suction distance Up to 10 m (32 feet) Size (LxWxH) 2.212x820x2.110 mm (6'-11" x 3'-3" x 7'-0") Weight 680 kg (1,500 lbs.) Motor fan 2,2kW (3 HP) Motor compactor 2,2kW (3 HP) Power 3 Phase, 230-460V, 50-60 Hz Sound 68-72 dB (A)
used
1 of used, combined canning and bottling line for beer or soft drinks, new 2016. Consists of the following equipment: - Semi-automatic, high-level, sweep-off, bulk can depalletizer, make COMAC. - Gravity can twist-rinser, make Eurosistemi, type GRV. This is a twin lane unit for 330- and 400/500-ml cans. - Can filler/seamer, make Comac, type Pegasus 8/1M. Output: 3,500 cph x 330ml (202/211 lid/body). - Vacuum Barrier Corporation liquid nitrogen dosing system for cans. - Level detector/rejector, make FT Systems. Checks for under- and overfills. - Assorted can and bottle conveyors. - VFDs for conveyor motors (control panel itself not available). - Self-adhesive labeller, make BRB, type MEGA ADE 622, 2 label stations (front/back wrap-around), rated at up to 4,000 cph / bph. - Semi-automatic carbonator/nitrogenator. Skid-mounted unit complete with stainless steel control panel, m ...
used
BRANDT KDF 660 Profiline single-sided edge banding with joint milling, pre-milling, fine milling, 2-fold corner copying, radius drawing blade, flat-drawing blade and babble units Type: KDF 660 Profiline Specifications: BRANDT KDF 660 Profiline with joints and corner rounds Preheating of the tool stucco IR preheating Edge thickness 0,4 - 15mm Banding height max. 66 mm, with program high adjustment Caps from the roll at 3mm thickness max 45mm height or 0.8 65mm Plate thickness max. 8-60 mm for corner copying max 40mm Control PC20+ link control (loss of contact), with modem for remote service/maintenance 1. Joint unit program Adjustment of the infeed line 2. Bandkapmesser 3a. Radiant heater High-strength bonding by workpiece preheating 3b. Spray anti-adhesive 3c. Quickmelt Glue Mel Mel Application Unit with Quick Change 3d. Leimangabe by means of glue rol ...
used
Automatic labeling machine in balcony design for the application of self-adhesive vignettes and tamper-evident labels (airplane closure as well as from above). Appendix incl.: - PLC SIEMENS, type S7-300. - HMI PC SIEMENS IPC 677 - 2x REAJET printing system, type HRpro with camera control system - Preparation for vision system LAETUS WT Commandor - Conveyor belt width: 250 mm - Various control systems for label presence with ejection etc. Output: up to 180 pcs./min. Format range: Carton size (A, B, H) A) from 25 to 185 mm B) from 15 to 85 mm H) from 68 to 250 mm A+W
used
Stock # U825V Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to ...
used
Edge Bander Manafacture: OTT Model No.: K155 Year of construction: 1992 Equipment: Roll magazine Glue unit with hot-melt adhesive - glue basin Pressure zone Cross-cut units Flush milling units Fine milling units with chamfer or radius milling Scraper Wobble
used
Automatic labeller for the application of self-adhesive vignettes and tamper evident seals. Balcony design. Capacity: up to 180 pcs/min. The machine is equipped with: - PLC SIEMENS, type S7-300. - HMI PC SIEMENS IPC 677 - Dopple REAJET printing system, type HRpro with camera control system - Preparation for Vision System LAETUS WT Commandor - Carton Transport Belt: pitch 250 mm - Various control systems for label presence with ejection etc.
used
Used carton wrapper by CAM in 2014 model G35 Machine in very good condition. Full technical documentation available and detail description below. Year of manufacturing 2014. Technical data and packaging length: mm. 2635 width: mm. 1595 height: mm. 1635+90-10 net weight: 1350 kg gross weight: Kg 2000 minimum speed: 6/1' cycles Maximum speed: 35/1 cycles Film Roll Autonomy: 8-10 hours volume:
new
Pre-milling unit: yes; Pre-milling unit material removal: 0 - 2 mm; plastic edges: 0,4 - 3 mm; solid wood edges: 0,5 - 5 mm; Workpiece thickness: 8 - 50 mm; Minimum length of workpiece: 120 mm; Min. work piece width: 110 mm; Anti-adhesive spraying unit: yes; Edge preheating device: yes / with ceramic infrared lamp; Bonding unit: granulat / Glue container quick-change kit; Jack knife: yes; Flush trimming unit: yes; Corner copy unit: yes; Flush radius milling unit: yes; Radius scraper unit: yes; Area scraper unit: yes; Buffing unit: yes; Cleaning spray unit: yes; motor power: 5 kW; machine length: 3774mm; machine width: 1546 mm; machine height: 1337mm; weight: 842 kg; Top equipment for high productivity with low space requirements! Intuitive operation with the eye-S control and 10 large touchscreen: - HMI Maestro Active Edge - Graphic display of all processing units ...
used
Semi-automatic sealer with manual formatting that seals the bottom and top of cartons with self-adhesive tape.
used
KOSME labeller, year 2006, clockwise direction, 4 plates, 2 adhesive stations both with thermal stamping, complete with 7 bottle sizes and instruction manual.
used
Glue application machine with 2 rollers Mod. SC2R-1300 Year: 2006 Production: FIN s.r.l. Italy Main technical specification: Width of machining: 1300mm Maximum passage between rollers: 120 mm Diameter of rollers: 185mm Progress speed: 19m/min Net weight 390 kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 222 x 153cm 400 V, 50 Hz, 037 Kw Accurate and uniform application with any type of adhesive, excellent technical characteristics, For the high practicality, functionality and safety for the operator, set it at the at the top of the 2-roll glue application machines. Coating roller covered with acid-resistant rubber, ground and grooved, hard-wearing as they are Built with a rational layer of rubber, it is therefore possible to carry out 6-7 grinds. It is easy and quick to disassemble. Distribute, precisely and evenly on one or both sides ...
used
1 of used beer bottling line, make Moravek, new 2007. Consists of Moravek BF sterile filtration unit with Parker DH filter housings for 1.00 and 0.45 micron filter elements, bottle loading table, Harlands Proteus full wraparound self adhesive labeller, ink jet coder, Moravek BC15 beer process control unit with inbuilt carbonator processor and filling machine pressure control system coupled to a Moravek 12/12/1 counter-pressure rinser/filler/crowner with double pre-evacuation, Mapex Flo level detector with faulty bottle rejector, Cheops Termopak tray/pad shrinkpacker and inter-connecting conveyors. Moravek 5SA portable menu-fed CIP set, swing bend plate and associated pipework. Line originally ran at 2.300 bph of 500 m (D 75 x H 225 mm, 26 mm crown-corks), packed as 4x2 and 4x3 on tray/pad + shrinkwrap film. Last used for 330 ml LongNeck bottles (D 60 x H 227 mm).
used
Labeller Manafacture: Weber Alpha Compact Type 150-30-LH Year of construction 08/2018 suitable for self-adhesive labels
used
Labeller Manafacture: Weber Alpha Compact Type 150-30-LH Year of construction 08/2018 suitable for self-adhesive labels Label width min. 10 mm – max. 150 mm Label length min. 20 mm – max. 300 mm Label roll outside diameter 300 mm Sleeve core diameter 76 mm Includes tripod mobile
used
Complete bottling line for 6 liters PET bottles 3.000 bph Composed by: 1. PET blowing machine manufacturer STM (Poland) type Blue line 3 Manufacturing year: 2015 Capacity: 3.000 BPH with 3 cavities mould for 6 litres with water chiller and full HP compressor unit. 2. Air conveyor system exit PET blower conveying the PET bottles to the filling tribloc 3. Rinsing filling capping Tribloc STM ARROW PET 16/16/6 NC/BIG for filling still mineral water in 5 liters PET bottles manufacturing year 2015. 4. Labelling machine UNO ADE adhesive labels on reels manufacturing year 2016 5. Automatic handle setting machine Ersey Makina manufacturing year 2015 6. Full bottles conveying system 7. Automatic Palletizer Ersey Makina manufacturing year 2015 8. Automatic stretch wrapper Ersey Makina manufacturing year 2015 Exceptional opportunity. Line available immediately.
used
Solvent-base & water-base combi laminating machine Max. coating width 1.100 mm Mechanical speed 450 m/1' Working speed up to 400 m/1' Roll diameter of the main unwinder 1.000 mm Roll diameter of the secondary unwinder 1.000 mm Reel diameter of the rewinder 1.000 mm Inner diameter of the main roller cores 152 mm Inner diameter of the secondary cores 152 mm Inner diameter of reel cores 152 mm Max. reel weight of the main reel 1.200 kg Max. roll weight of secondary unwinder 1.200 kg Max. reel weight of the rewinder 1.200 kg Tape tension range main unwinder 2 – 40 kg Tape tension range secondary unwinder 2 – 40 kg Tape tension range of the rewinder 2 – 40 kg Max. temperature in the dryer at a room temperature of 20°C 120°C Solventless lamination with one-component adhesive trolley cart with 4 solventl ...
used
Overview Disposable glass line for wine and spirits: The Cortelazzi Fintec Arol filling line for non-refillable glass bottles was previously used to fill wine at a company in Spain. As the company’s sales volume has increased, the production capacity of the existing line is no longer sufficient, so it is being replaced by a new line. The bottles are cleaned, filled and capped in the rinser/filler/capper block. The bottles are then externally cleaned, dried and fitted with a capsule and label before being packed in a carton and palletized by hand. The line has been permanently well maintained. The line can also be offered completely overhauled. Technical Specifications: Output: 1,250 bph Machine List: Machine type: Rinser / Filler / Capper Manufacturer: Cortelazzi Fintec Arol Model: KARMA 12-12-1 Year of manufacture: 2001 Machine type: Bottle exterior cleaning and drying ...
used
Overview Most of the equipment, which belongs to this brewery, was manufactured in 2021 and 2022. There are several components which have never been used. The owner had purchased all the equipment to set up a micro brewery but then decided to shift the production of his beer to a bigger brewery, producing for him. Therefore all the equipment is for sale. List of components Manufacturer: Bühler AG Machine Type: malt mill Model: Smartgrist YOM: 2022 (used since February) Manufacturer: Spadoni Machine Type: 25 hl brew house Model: RMB 2500 YOM: 2022 (not used yet) Capacity: 25 - 30 hl in one brewing process, two processes possible in ten hours Manufacturer: ABC Perello Machine Type: steam generator Model: PMY - 12 YOM: 2022 (not used yet) Capacity: 1250 Kgv/h Manufacturer: --- Machine Type: water softener Model: --- YOM: 2022 (used since January) Manufacturer: Isma S.A. Machine ...
used
Cable marking, markers for wires and cables, approx. 1800 labels WEIDMÜLLER THM WO 25/76 GE THM WriteOn 76/25 ge Art.-No.: 177434 0000 Length: 76 mm Width: 25 mm Color: yellow Material: self-adhesive foil New ! Dimensions: 98 x 98 x 85 mm
used
Product safety sign, approx. 850 pieces KROSCHKE 100 x 35 mm inscription: Wear Safety Gloves. Surface may be HOT. Length: 100 mm Width: 35 mm Material: self-adhesive film, with surface protection Combination sign for machines with 2 symbols and text other quantities on request ! New ! Dimensions ( Packaging ): 340 x 110 x 110 mm
used
Product safety plate, approx. 850 pieces KROSCHKE 100 x 35 mm Inscription: Read Service Manual Length: 100 mm Width: 35 mm Material: self-adhesive film, with surface protection Combination sign for machines with 2 symbols and text other quantities on request ! New ! Dimensions ( Packaging ): 340 x 110 x 110 mm
used
Mudflap +GF+ ( GEORG FISCHER ) Type: 305 DN 80, PN 10 d90DN80 two adhesive sockets, metric Material: PVC-U, silicone-free housing transparent New ! Dimensions: 300 x 250 x 120 mm
used
Sensory reflector for photoelectric sensors, 5 pieces BALLUFF, SICK 3x BALLUFF BOS R-1 BAM00UK 2x SICK C110A 5304549 Diameter: Ø 84 mm Thickness: 7,0,3 mm Mounting: Adhesive, Screw M4 Material: Plastic Other quantities on request ! New ! Dimensions ( packaging ): 90 x 90 x 50 mm
used
Cellular rubber tape RICHTERS 50 x 8 mm Width: 50 mm Material thickness: 8 mm Number of rollers: 6 Roll length: 5 m Material: Cellular rubber, self-adhesive Other quantities on request ! New ! Dimensions ( single roll ): 240 x 240 x 50 mm Dimensions ( packaging ): 255 x 255 x 310 mm
used
Cellular rubber tape RICHTERS 25 x 5 mm width: 25 mm material thickness: 5 mm Number of rollers: 9 roll length: 10 m Material: cellular rubber, self-adhesive Other quantities on request ! New ! Dimensions ( single roll ): 260 x 260 x 25 mm Dimensions ( packaging ): 265 x 265 x 310 mm
used
To be sold on behalf of customers! Gernep self-adhesive labeling machine Labetta 12 784 4SK with 3 Herma dispensers
used
Corner protection profile, corner protection profile, corner protection SHG Knuffi Type A Diameter: Ø 38 mm Angle cutout: 20 x 20 mm Length: 4x 1,0 m, 1x 0.65 m, 1x 0.1 m Colour: yellow/black Mounting type: self-adhesive Material: polyurethane New ! Dimensions ( packaging ): 1000 x 100 x 100 mm
used
Pipeline marking, pipeline marking, approx. 165 labels JAC Serilux, DURO Thermal oil 250 °C Labeling: Length: 70 mm, Width: 38 mm Directional arrow: Length: 70 mm, Width: 20 mm Background color: brown Material: self-adhesive film New ! Dimensions ( packaging ): 710 x 85 x 10 mm
used
Pipeline marking, pipeline marking, approx. 165 labels JAC Serilux, DURO nitrogen label block: length: 70 mm, width: 38 mm directional arrow: length: 70 mm, width: 20 mm background color: black material: self-adhesive film New ! Dimensions ( packaging ): 710 x 85 x 10 mm
used
Capacity: 10,000 bottles/h Equipment: 4 units for self-adhesive labels from the roll (torso, chest, back, closure)
used
Capacity: 30,000 bottles/h Equipment: Wrap-around label from the roll + self-adhesive label from the roll
used
Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Adhesive tape machine/ carton sealer Manafacture: Normpack Model No.: NCX-067-70-2175 Serial Number: AC030093 Year of construction: 2010 Weight: 175 kg overall width: approx. 1040 mm total depth: approx. 1200 mm total height: approx. 1800 mm Conveying width: approx. 660 mm Head: approx. 680 mm Includes 2 new webbing straps for guidance. Includes 2 boxes with packing tape (8 rolls in total) Conveyor technology has run all the way to dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, ...
used
Precision Hydraulic Double-Sided Auto Feed Cutter CSS-806 Pressure: 190 tons Main motor: 7.5 kW Effective area: 2100x1300 kg Dimensions of machinery LxWxH: 4800x3050x2170 mm Pressing Distance: 5250 mm Weght aprox.: 17000 kg Function of the Machine: - Electronic industries: Optical films, PET, optical adhesive, general tapes, light shading material, foams, etc. - Traditional industries: Prototyping and die cutting machine for stationery, vacuum forming, double blister, footwear, EVA foam disposable plates, puzzles, leather, vinyl tile flooring, oil seals, etc. The machine body is made of high tensile steel that has undergone the annealing process to relieve stress. It will never deform even after long term use. The rotating disk of the cutting plank is capable of reducing wear and tear to extend the life of cutter. With ultra precision oil circuit, the machine move ...
used
FOR IMMEDIATE SALE: GLASS BOTTLE FILLING LINE FOR STILL AND CARBONATED DRINKS 330ml & 500ml LOCATION: MANCHESTER CAPACITY 16,000 BOTTLES PER HOUR - 330ML This line is in very good condition and is extremely reliable, maintenance procedures in this facility are excellent. Viewing is encouraged. Please Contact Indassol for videos of the line running 330ml ginger beer product Line 9 - 330ml and 500ml Glass Bottle FEATURED ITEMS: • Makro 6 Station Auto Changeover Self Adhesive Labeller (Year 2018) • Krones Variojet Mecafill Multi Bloc (Rinser, Filler, Crowner and Capper) (Year 2002) • Heuft Low/High Level Rejection System (Year 1997) • VM Systems Laning Device (Year 2005) • OCME Altair Box Packer (Year 2015) • Denwell Carbonation Unit (Year 2020) • Tetra Pak (Tetra Plex) Plate Heat Exchanger For Pasteurisation • Process Tanks Ja ...
used
Throttle sleeve, with adhesive nozzle +GF+ ( GEORG FISCHER ) Type: V251 199041203 DN 10 Material: PVC, EPDM Glue nozzle: Ø 16 mm, length: 15 mm New ! Dimensions: 58 x 47 x 30 mm
used
Used edge bander HOLZ ER mod. SPRINT 1321 - 4 EC Year of manufacture 2008 "Edge Control" gluable edge thickness from 0.4 to 15 mm in roll mm. 3 max panel height from 6 to 60 mm min. length piece 180 mm min. width piece mm. 60 feed speed from 8 to 18 mt/min variable by CN Pressure bridge with motorized adjustment with controlled axis inlet stop adjustment with CN motorized axis grinding unit with automatic adjustment of the thickness in relation to the thickness of the workpiece and with undercounter exclusion Nr. 2 motors each KW 2 Automatic Edge Charger multi-adhesive group for EVA and PVR adhesives in cartridges and granules pneumatic pressure unit with axis controlled by CN with nr. 3 pressure rollers, one of which is motorized header group with 2 motors of 0.45 KW, revolutions 12,000, pneumatic orientation 0-10 ° Overlapping trimming ...
used
Diaphragm valve, with loose flanges +GF+ ( GEORG FISCHER ) Type: 315 DN 50, PN 10 d63DN50 two adhesive nozzles: Ø 47 / 63 mm, length: 40 mm Material: PVC-u, EPDM New ! Dimensions (valve): 225 x 150 x 190 mm
used
Set up for ALU/PVC and ALU/ALU operation • Format range blister (W x L) min 50 x 22 mm / max. 156 x 115 mm • Drawing depth max. 12 mm • Output 15 - 50 forming cycles/min • Transport length 42-115 mm • Film width 100-168 mm • Forming film Ø max. 450 mm, core Ø 76 mm (PVC) / 150 mm (ALU), pneumatic clamped • Cover film-Ø max. 240mm, core-Ø 76 mm, pneumatic clamped • Adhesive bonding point detection for sealing and forming film • Product feed by deticated feeder Uhlmann SimTab 2.1 for tablets/capsules • Forward feed after forming and sealing station • Tear and pore control for forme film and cover film Visiotec VisioScan MT-160/200 • Forming station with compressed air for PVC forming film • Heating station with extraction for the use of PVDC film • Mechanical forming station for ALU forming film • Filling control VisioChrom color with separa ...
used
Grinding wheel, silicon carbide sandpaper, strong, self-adhesive, waterproof HERMES WS FLEX 18 C SK Diameter: Ø 200 mm 100 pieces Grain P400 100 pieces Grain P600 100 pieces Grain P1200 Dimension ( packaging ): 210 x 210 x 165 mm
used
Working direction: left-rightNumber of self-adhesive stations: 2with capsule applicatorLocation: Geisenheim More then 300 machines new and second hand on our seema .de
used
Edge banding machine wood Her Express 1437 Banding height max. 51 mm Edge thickness 0.3 - 13 mm Swivelling control panel Hot melt adhesive application - cartridge system Car. Edge magazine Full car. Edge feeding for roll and strip goods Printed work Cross-cut unit swivelling 0° - 15° Bevel radius milling Drawing blade unit Buffing unit immersion-controlled Soundproofing booth Machine length approx. 4500 mm Machine in working order From the carpentry site
used
• For printing and dispensing self-adhesive labels • For labelling flat products (cartons) with swivel arm for front labelling • Label width max. 175 mm, height 110 • Thermal transfer printer Zebra 110 PAX4 for printing barcodes or alphanumeric codes • PLC Siemens S7-300 • System for use on conveyor belts or case packers
used
Makro 6 Station Auto Change Self Adhesive Labeler Model: Mak-5 24P UA6 L3 C03 With Optical Bottle Positioning System Available Immediately Year 2018 Low hours
used
Fully automatic carton sealing machine for gluing on top with self-adhesive tape Running direction from right to left Carton size range width 100- 500 mm, height 100 - 500 mm, length 150 - 760 mm Output 20 cartons/min Flap folding device Drive 400V/50Hz