ada used for sale

max. wheel diameter: 3000 mm gear width: 1200 mm max. module: 30/40 min. module: 2 table diameter: 2500 mm table load capacity: 400 kN hob dia. - max.: 450 x 500 mm milling spindle speeds: 10 - 165 U/min hob length max.: 500 mm tip circle diameter: 2050 mm tooth helical angle min/max: 0 - 45 ° center distance betw. workpiece-tool min/max.: 150 - 1750 mm milling slide swivelling: 50 Grad distance table / counter stay: 1050 - 2050 mm shifting: 300 mm workpiece weight: 40 t table bore diameter: 800 mm depth of hole: 1100 mm main drive motor: 37 kW min. workpiece diameter: 290 mm min. number of teeth: Wälzfräsen 20 min. number of teeth: Formfräsen 2 taper: MK 100 feeds axial: 1 - 1800 mm/min radial feed: 1 - 500 mm/min feed: Tangential 1 - 450 mm/min rapid traverse: 1875 / 530 / 470 mm/min electrics - voltage/frequency: 380 / 50 V/Hz control: Siemens Sinumerik 3M total power requirement: ...

tool adaptor: . weight: . kg material: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Nobilta NOB 300. The Nobilta is the New - Generation of Powder Processor designed to perform fast powder mixing of Macro to Micro precision mixing, creating and treating composite materials such as surface-modification and sphericalizing particles in accordance with specific design conditions in one processor. The Nobilta is structured with a horizontally positioned c ...

thread dia.: 12 mm threading length: 20 mm turning speeds: 400 U/min working area: 500 - 1600 mm weight of the machine ca.: 25 Kg dimensions of the machine ca.: m • pneumatical thread cutting device, M3 - M12, • with 6 adapters of thread cuttings, Size 1, • control valve with lubrication, • order no. 31681, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool adaptor: SK50 weight: . kg material: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used fine impact mill Hosokawa Alpine Contraplex CW 250 pin mill. The Contraplex pin mill is fitted with two contrarotating pin discs achieving high relative speeds, allowing it to reach finer end products than our traditional universal mill type UPZ. This grinder is suitable to comminute many different products for all kind of industries, like chemicals, food, pharma, etc. Material ...

weight max. in kg: 2000 kg tool adaptor: Kugelkopf stroke height: 200 mm battery: 24 V / 240 Ah weight: Batterie: 204 kg weight of the machine ca.: 320 + 204 Kg dimensions of the machine ca.: 1,1 x 1,2 x 1,4 m • Charger, last UVV -check 01/2009, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool adaptor: . weight: . kg material: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Mikro Classifier CC22, from our former generation previous to our current technological evolution. This air classifier can operate off-line as a stand alone system or in-line as the perfect companion for a Hosokawa Alpine ACM 10 or ACM 15 impact classifier mill, to ensure no undesired fine dust particles are present in the final micronized product, usually in the ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used universal fine impact mill Hosokawa Alpine 315 UPZ. This turbo mill is able to pre-cut and produce medium fine products. Can be fitted with different grinding tools in order to adapt to each specific grinding needs. This mill is suitable to process many different products for all kind of industries, like minerals, chemicals, food, etc. Material of construction: stainless steel  ...

power capacity: kW tool adaptor: tool taper: HSK-A 100 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 2-axis (simultaneous) fork type milling head Power capacity - milling spindle Milling spindle 35 KW from 5000 rpm Spindle speed max. 12000 rpm Swivel range: A axis + / -95 deg C axis 360 deg Note: Milling head was only a short time in operation. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine AFG-R 200 fluidised bed classifier jet mill system. The AFG-R is a special variant of the standard AFG where one nozzle is placed vertically pointing upwards on the bottom of the grinding chamber to elevate all the material in the fluidised bed to the jets meeting point, specially interesting for heavy and difficult to grind materials. This machine is specially  ...

diameter: 300 mm Number of knives: . z= tool adaptor: . Door cabinet with SK50 mounts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic depalletizer for glass bottles Capacity: 15,000 bottles/hour for 330-500 ml User-friendly and customizable software for every requested product and every need. Minimal downtime: Our depalletizer can be quickly adapted to new products, size changes or product types. Semi-automatic "push" depalletizer for pallets with layers of glass bottles, cans or other types of containers with two-column gantry structure, mobile centering device, intermediate table and transfer trolley. On request, our machine can work fully automatically, which leads to a high production rate. The machine includes; Layer movement unit Pallet conveyors (motorized) Fuse box HMI – Keyboard and display with auto-programming functions Pneumatic system Protective grilles (metal nets) Equipment Operating status of the machine Technical Documentation The devices are compliant with and compl ...

ZOLLER SMILE / PILOT 3.0 presetting and measuring machine was manufactured in 2019 in Germany. The machine is a professional tool measuring and presetting device, whose easy operation and precision guarantee flawless results. A telecentric lens and a CCD camera with integrated LED ring for measurements in reflected light (blade inspection) are used to perform the measurements. ZOLLER SMILE 420 is equipped with the CNC controller ZOLLER »pilot 3.0« and functions such as automatic blade recognition, measurement of radial run-out and axial run-out, maximum contour function and cutting edge control. The tool to be measured can have a maximum length of 420 mm and a maximum diameter of 420 mm. Specifications of the ZOLLER SMILE / PILOT 3.0 presetting and measuring machine - maximum tool length Z: 420 mm - maximum tool diameter D: 420 mm - diameter measurement according to Abbe’s p ...

plate thickness: 1,25 mm roll-body distance: 250 mm throat: 260 mm distance between roll centers: 62 mm tool adaptor: 26 mm speed: 6,3 m/min total power requirement: 0,7 kW weight: 170 kg range L-W-H: 1020x600x1500 mm Domestic equipments: - motor driven beading machine - 5 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 2,5 mm roll-body distance: 260 mm throat: 500 mm distance between roll centers: 92 mm tool adaptor: 35 mm speed: 3,5 m/min total power requirement: 1,5+0,55 kW weight of the machine ca.: 320 kg dimensions of the machine ca.: 1200x700x1200 mm Domestic equipments: - motor driven beading machine - 3 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I-beam section - flat steel: 80x20 (d1200) mm I-beam section - upend: 80x25 (d2100) mm L-beam: 50x50x6 (d1000) mm bar material - diameter: 40 (d800) mm square material: 60x60x3 (d4000) mm rectangle: 80x30x3 (d6000) mm tube diameter max.: 70x2 (d1600) mm tool adaptor: 60 mm roll diameter: 177 mm bending speed: 6,4 m/min total power requirement: 4 kW machine weight ab.: 970 kg Overall size: 1400x950x1450 mm Domestic equipments: - hydr. roller drive - Planetary gearbox delivery of the 2 lower rollers - for extra small bending radii - hardened tool holder (42CrMo4) - Standard roller set, hardened - lateral straightening rollers - mobile control panel - 3 driven rollers - Digital display - Machine horizontal u. vertically usable - CE mark / Declaration of Conformity - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 2,5 mm roll-body distance: 260 mm throat: 500 mm distance between roll centers: 92 mm tool adaptor: 35 mm speed: 3,5 m/min total power requirement: 1,5 kW weight of the machine ca.: 295 kg dimensions of the machine ca.: 1200x700x1200 mm Domestic equipments: - motor driven beading machine - 3 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Die sinking machine Fabr. AEG-Elotherm type Elbomat 222 WMash. -No: 224.4009with generator EP 60 C 2145172 and filter F 11 VYear of construction 1980Adjustment X: 300 mmAdjustment Y: 200 mmReading accuracy: 0.01 mmTable load max .: 400 kgTable dimensions: 580 x 310 mmTank / processing room: 700 x 450 x 265 mmMax. Fluid level above workpiece carrier: 250 mmTank volume: 70 lWorking head angle: 200 mmHead support: 200 kpMax. Distance between working head and table: 480 mmDepth gauge: 50 mmDepth-of-cut accuracy: + - 0.02 mmExternal dimensions of the machine: 1250 x 1225 x 2150 mmWeight approx.: 1.3 tWith- mot. Coarse adjustment of the working head / W axis- Eloplus Generaotr type EP 60 C- Heidenhain positioning controller TNC 1213 R Orbicut midi tromes- Adapter slot- H 400 system- Filter F 11Vused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.P ...

ully automatic wood copy milling machine make REICHENBACHER type KS225Make -No: 1182, year of construction 10/1994 with Siemens OP 393 III controlSimultaneously mills and grinds two small parts with complicated shapes, such as tobacco pipes, golf club heads, sports pistol grips, wooden shift levers, etc.Technical specifications:machine constructionStable frame construction in a closed, against dust andNoise-encapsulated housing. Upper area of the front with gas pressure springHinged door, with security window.machine equipmentTo craft 2 copies of a model at once, you have:2 milling spindles each with a milling head dia. 240 mm (equipped with HS steels), via flat belts jointly driven by motor 2.2 kW; number of milling spindles 7200 rpm; Direction of rotation right.2 grinding units each with a 120 mm wide endless grinding belt, together with a 0.75 kW motor driven; belt speed 13 m/s; wi ...

plate thickness: 4 mm roll-body distance: 260 mm throat: 500 mm distance between roll centers: 132 mm tool adaptor: 40 mm speed: 5 m/min total power requirement: 2,2 kW weight of the machine ca.: 350 kg dimensions of the machine ca.: 1650x700x1280 mm Domestic equipments: - motor driven beading machine - 3 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4 mm roll-body distance: 260 mm throat: 500 mm distance between roll centers: 132 mm tool adaptor: 40 mm speed: 5 m/min total power requirement: 2,2+0,55 kW weight of the machine ca.: 450 kg dimensions of the machine ca.: 1800x700x1600 mm Domestic equipments: - motor driven beading machine - 3 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

throat: - mm tool adaptor: - power requirement: - kW : 23 mm spindle distance: max. 400 mm : 1200 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TR 450 MATRIX cross-cut system with automatic cutting cycle by input on the control panel or by cutting list Input material: Single or stacking material with fixed length Applications: Production of pallets, packaging, furniture and garden furniture Cross-section: mm 25x330, 40x310, 60x290, 85x277, 95x265 Min. workpiece thickness 10 mm (with automatic loader 20 mm) Work table inclined 8° Technical characteristics of the sawing unit: Pneumatic sawing unit TR450 Engine power 5.5 hp (4 kW) HM saw blade diam.450 mm., F=30 Z=72 S=4.2 Technical characteristics of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT Feed by rack and pinion system and brushless motor Positioning accuracy +/- 0.4 mm Powerful feed motor for a package weight of 80 kg Maximum feed speed 90 m/min Pneumatic lifting of the slider at the end of the cutting cycle and overhead ret ...

throat: 900 mm tool adaptor: SK50 power requirement: . kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ELWIK RT-C1 hot runner control system is a very important device for ensuring the right temperature during the injection process. The temperature controller for an injection moulding machine, having one heating zone with current load of 16 A, is used in cooperation with central nozzles, which enables the processing of all types of plastics. The temperature can be regulated from 0°C to 500°C. Thanks to the functions and protections used, the temperature cmould temperature controller guarantees continuous and uninterrupted operation, preventing, for example, complete burning out of the heater by drying it when the supply voltage is reduced. The extremely important auto-adaptation function automatically sets the P, PI, PID parameters without exceeding the set temperature, while the sequential control, especially important with a large number of nozzles installed in the mould, significa ...

power capacity: 56,5 kW tool adaptor: HSK 100 spindle turning speed - stepless: 10.000 U/min total power requirement: - kW weight of the machine ca.: - t unused - in original packaging 4 sets available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mm y-travel: 700 mm z-travel: 630 mm Control: Meldas M650 tool adaptor: HSK-A63 Table dimensions: 450x450 mm Table load: 400 kg number of spindle speeds: 300 - 20.000 min-1 total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m FEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20.000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2,5 sec. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool adaptor: SK50 weight: . kg material: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ELWIK RT-C hot runner control system is a device for ensuring the right temperature during the injection process. The mould temperature controller, built in a panel system, adjusts temperature in the range from 0 to 500°C using a coding switch. The advanced technology and safety features included in the device guarantee uninterrupted and reliable operation of the mould temperature controller. The P, PI, PID parameters are set automatically by the temperature controller to the injection moulding machine, thanks to an auto-adaptation function that ensures that the pre-set temperature is not exceeded. The heater is dried when the supply voltage is reduced, completely protecting it from burning out. The mould temperature controller is equipped with six heating zones with a 16 A load per zone, making it possible to process any type of plastic. Technical specifications of the ELWIK RT-C ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental unit Hosokawa Alpine A FC 200 Flakecrusher. The Alpine AFC Flake Crusher is used to gently grind brittle and easily breakable materials in order to reduce their size. It can obtain low dust granulates thanks to its gentle crushing process controlling the maximum permissible top cut while avoiding the generation of undesired fines. It´s used for coarse milling and can reach particle siz ...

spindle diameter: 100 mm x-travel: 1600 mm y-travel: 1120 mm z-travel: 1250 mm Table dimensions: 1250 x 1250 mm tool adaptor: MT 6 spindle turning speed range: 7,1 - 1120 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Outriggers Facing head D.R.O. Acurite ISO 50 adapter Spindle support The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

throat: . mm tool adaptor: . power requirement: .. kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 1 angle milling head TOS Sk50 with extension for spindle 130 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 90 mm x-travel: 1250 mm y-travel: 1200 mm Table dimensions: 1000 x 1120 mm w-axis: 700 mm tool adaptor: ISO 40 spindle turning speed range: 28 - 1400(x18) U/min z-travel: 1600 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Refurbished Hosokawa Alpine compactor CS 25. The compactor allows to transform powder materials into briquets or granulates. Thanks to the extended range of accessories, such as different rollers and sieves, it´s possible to fully customize the form, size and shape of the end product adapting it to the required specifications. Suitable to process many different products for industr ...

Siemens Advia Centaur XP Analysis System With Siemens Healthineers services and maintenance until the last minute 02/2022 Modern AE immunoassay technology Meet clinical requirements with acridinium ester (AE) technology, which ensures the necessary flexibility and sensitivity for new and innovative assays. Comprehensive diagnostic clarification of various clinical pictures thanks to a test menu with over 70 different assays. Simplified inventory management and lower costs by using the same ready-to-use reagents on all ADVIA Centaur analysis systems. Simplified operation, continuous operation All samples, reagents and consumables can be loaded and unloaded during operation. Easier training and operation thanks to an intuitive, icon-based user interface. Fewer operator intervention because daily maintenance is low and the system does not need to be cleaned monthly or booted  ...

spindle diameter: 90 mm x-travel: 1250 mm y-travel: 1120 mm z-travel: 1400 mm w-axis: 710 mm spindle turning speed range: 28 - 1400(x18) U/min tool adaptor: MT 5 Table dimensions: 1000 x 1120 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Facing head, 3 axis digital read out, spindle support and tailstock. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 800 mm z-travel: 5000 mm control: Siemens tool adaptor: ISO 50 number of spindle speeds: 285-3000 voltage: 380 V total power requirement: 36 kW weight of the machine ca.: t dimensions of the machine ca.: m ATC 40 positions 2x workpiece holders with (2x) hydraulic support The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,19 t dimensions: 1,2 x 0,8 x 0,85 m Siegmund workstation including 2 drawers Premium Light, through hardened tool steel X8.7, plasma nitrided and BAR coated. Drilling Ø 28 mm, drilling surface 100x100 mm grid. Material thickness approx. 15 mm With the new workstation from Siegmund, you can create your ideal workplace in a modular system. The Siegmund Workstation can be individually adapted and expanded to meet your needs and wishes. Whether sawing, drilling or welding - the absolute all-rounder in every workshop! Consisting of: 1x 004002 (Siegmund Workstation) 1x 804004.X7 (perforated plate) 1x 284030 (clamp holder) 1x 004020 (shelf) 1x 284035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) Spacer ring 800653.N is required for clamping with  ...

Ecat ovo compact EG10 In-Ovo vaccination system For modern hatcheries, the Egginject® Compact enables safe in-ovo vaccination thanks to its dual-pressure injection system. The Egginject Dual Pressure Injection System is a patented technology that allows the injection depth to be individually adapted to each individual embryo, regardless of size and age. Compact Egginect allows vaccination in small and medium-sized hatcheries - Adaptable to all types of incubation trays - Reliable and solid design for heavy use - Easy to use: simple and servant-friendly. - Stand alone or fully integrated into the Hatchery Automation Line. Year of construction: 2013 Item condition: used

thread dia.: 20 M turning speeds: 400 U/min thread: M 4 - M 20 M working area: 1900 Rmax. working range: 200 Rmin. Description: The AT models have a radius of up to 1900 mm and their construction a flexible workspace. For professional use. Easy to mount on a worktop. Furnishing: - including 7 thread cutting inserts • M3 20111812 DIN 371 19 • M6 20111823 DIN 371 31 • M8 20111824 DIN 371 31 • M10 20111826 DIN 371 31 • M12 20111827 DIN 376 31 • M16 20111829 DIN 376 31 • M20 20111831 DIN 376 31 - Control valve with lubrication - Including air motor - Adapter connection size 2 - The cutting head can be pivoted vertically downwards by 90 ° - The cutting head is pivoted and rotatable through 360 ° - Operating instructions in German without the perforated table as per Fig. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 x 32 mm capacity 45 degrees: round: 110 mm capacity 60 degrees: round: 90,0 mm capacity 90 degrees: square: 95,0 mm capacity 45 degrees: square: 95,0 mm capacity 60 degrees: square: 90,0 mm capacity 90 degrees: flat: 180 x 95 mm capacity 45 degrees: flat: 125 x 95 mm capacity 90 degrees: round: 115 mm capacity 60 degrees: flat: 90 x 90 mm 0: 15 / 30 / 45 / 90 U/min weight of the machine ca.: 375 kg Equipment / description: - Manual high-performance vertical circular saw - for cuts from 45 ° right to 60 ° left - The saw head is on pretensioned linear guides - guided on a stable cast steel column - The powerful 2-stage gear was specially designed for cuts designed in solid material - The user has a total of 4 blade speeds - available for optimal adaptation to the material - The large turntable with internal table clamp & Precision stops at 0/45/60 ° ensure quic ...

carrying capacity: 500 kg. number of suction cups: 6 Stück suction cup dia.: 215 mm 0: 8,0 m³/h tool adaptor: Kranöse 80,0 mm voltage: 400 V total power requirement: 0,18 kW weight of the machine ca.: 120 kg. dimensions of the machine ca.: 2400 x 1100 x 584 mm Furnishing : - for the horizontal transport of smooth, dry and airtight panels - Robust support structure made of steel - Painted in RAL 2000 with a low weight - Galvanized longitudinal traverse with a length of 2,400 mm - 3x galvanized crossbars with a length of 1,000 mm - 6x springy, articulated and adjustable suction cup holders - 6x suction cups Ø 215 mm - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump - with a suction capacity of 8 m³ / h and an ultimate vacuum of 85% (150 mbar) - 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Operating handle can be extended to 1,000 mm from t ...

Hobart 305 GTP Dry Steam Fast Cooker Gentle, healthy cooking: steaming, steaming or blanching 3 different pressure levels 0 / 0.5 / 1 bar for individual adaptation to the food Extremely short cooking times Individual temperature program as standard: 50° - 99°C Electronically controlled program sequences Compact tabletop unit with built-in steam generator 1 cooking chamber for 3 x 1/1 GN up to max. 65 mm deep or 2 x 1/1 GN up to max. 100 mm depth or 1 x 1/1 GN up to max. 200 mm depth Multi-setting, the connection value can be reduced to 18.2 kW with hot water connection (power then approx. 550 servings/h) Automatic defrosting Water level controller with display Fully electronic control for time input Self-diagnosis with fault display Chamber pressure is displayed digitally Evaporation destruction with built-in wras condensation Automatic boiler emptying with drain pump a ...

welding power: 30 - 290 A (stufenlos) welding power: ED 60% 175 A Wire thickness: 0,6 - 1,2 Stahl mm Wire thickness: 1,0 - 1,2 ALU mm voltage: 400 V weight: 67 kg LORCH authorized trader - other models on request Description: Automatic setting With the help of the automatic adjustment of the wire feed speed The Lorch M 304 supports you with the selected voltage level Finding the perfect working point. Quality wire feeder The Lorch M 304 comes with a 4-roller wire feed as standard Robust housing due to its compact and robust You can easily place your Lorch M 304 under the housing with sturdy wheels Stow away the workbench or use the top of the machine as a storage area. Double gas bottle lock For optimal safety, the Lorch M series has a double Gas bottle lock. So you can move your power source safely. Furnishing: - Integrated 4-roll wire feed - ML2500 burner, 4m - Workpiece lead 25 mm²  ...

thread dia.: 12 M max. turning speeds: 400 U/min thread: M 3 - M 12 M working area: 1600 R max. working range: 500 Rmin. weight: 16 kg Description: The AT II models have a radius of up to 1600 mm and thanks to their construction a flexible workspace. For professional use. Easy to mount on a worktop. Furnishing: - Tool holder with 6 cutter holders • M3 20111812 DIN 371 19 • M4 20111814 DIN 371 19 • M6 20111816 DIN 371 19 • M8 20111817 DIN 371 19 • M10 20111818 DIN 376 19 • M12 20111820 DIN 376 19 - with slip clutch - Control valve with lubrication - Including compressed air motor / maintenance unit - Adapter connection size 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: Heidenhain 355 tool adaptor: SK50 weight of the machine ca.: 8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Turboplex ATP 200 air classifier for the perfect end product particle design. Our air classifiers allow you to split the product into two fractions, a fine and a coarse one, when a regular sieve can´t achieve this task due to product fineness or other characteristics. This is handy when you need to dedust the product removing the undesired fine dust or ensure a  ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Slightly used, in like new condition, classifier mill Hosokawa ACM 5 Pharma. This micronizer allows you to obtain a perfectly controlled top cut. It can be used to fine grind different products. The comminution occurs in the lower part of the grinding chamber where the feed particles are crushed. Thanks to the adjustable classifier wheel on the upper part of the grinding chamber, the ...