ada used for sale

1 x Adamson 96in wide x 32in dia 4 roll Z Calender line, peripherally drilled rolls with oil heating, motorised nip adjustment to rolls 1,2 and 3 (roll 4 fixed). Cross axis roll 4. Hydraulic pre-load to all rolls, Adjustable stock guides, rubber coated pressure roller with hydraulic adjustment and v/s motor to roll 4, with Adamson unidrive gearbox on universal couplings, with 500HP, 850/1300rpm, 785A, 500V, 3ph, 60Hz Reliance DC variable speed motor to rolls 1, 2 and 3. 200HP, 850/1400rpm DC variable speed motor to roll 4. 1 x Embossing station 1 x set of 8 x 96in wide x 24in dia stainless steel cooling drums. 1 x Dual turret winder. Full drawings available. We can supply the upstream equipment I.e. internal mixers that fed the calenders, along with the batching and material handling/dosage equipment. Complete line available in very good condition previously us ...

Schließrahmen - Letter Press Frame Adast GP Tiegel -1 Frame Adast GP Tiegel Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Reference Num.: 3742 Brand: Adast Type: Tiegel Grafopress GPC Size: 260 x 380 mm Available: directly Status: In production Location: Deutschland Sheet size: max 260 x 380 mm

Adast Dominant speed regulating board.

One color offset ADAST Dominant 516, in beautiful condition, extreemly well kept and maintained. VARN COMPAK III dampening system. All serial equipment and blower.

Manufacturer: Adam Bodenabsetzer, Type: Aufrichter, Year: ca.1998, Control: keine, Corpus length max mm: 1200, Working hight mm: 950, Hydraulical: Motorisch, Belt width: 600/1300, Total power kW: ca.5, Year :ca.1998

Reference ID PP-50993 Category 4-Colors Manufacturer Adast Model Polly Prestige 474 Year Built 2004 Color 4 Impression 117 Working Hours - Speed-- Max. size 52x74 cm Min. Size - Condition Good Location Europe Availability Immediately Machine Description 4 colors Alcolor dampening CIP4 IR dryer semi automatic plate change straight machine Roller and Blanket wash Impressions: 117 million

impressions: - Mio. max. printing speed sheets: 10000 /h max. paper size: 38 x 52 cm serial no.: 8212074 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

impressions: - Mio. max. printing speed sheets: 10000 /h max. paper size: 30,7 x 44,0 cm serial no.: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 color Offset Press Serial-No. 414 11507 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Drilling Ø to: 30 mm Spindle holder: MK 3 Quill stroke: 120 mm Table clamping surface: 335 x335 mm Table swivels horizontally: 360° Table adjustment via hand crank approx.: 550 mm Largest distance between table and drilling quill: 550 mm Largest distance between machined base plate and drill quill approx.: 1120 mm 12 spindle speeds: 160 - 930 rpm Drive motor: 380 V, approx. 0.8/1.3 kW Space requirement: 900 x 470 x 1780 mm

Tool holder, milling holder, milling tool, adapter -Milling fixtures: Adapter SK50 - MK5 -Intake: SK50 -Tool holder: MK5 -Dimension: Ø 100 x 340 mm -Weight: 8.6 kg

Tool holder, milling holder, milling tool, adapter -Adaptation: SK50 13 pieces adapter -Tool holder: MK5/MK4/MK3/MK2 -Various types: see photos, more pictures can be sent -Price: complete -Dimensions: 740/500/100 mm -Weight: 54.9 kg

Power strips, portable power strips, solid rubber power strips, adapters, construction site power distribution boxes, CEE adapters -Manufacturer: Bals, CEE adapter 32A / 16A -Transport dimensions: 255/145/H165 mm -Weight: 2.6 kg

Power strips, portable power strips, solid rubber power strips, adapters, construction site power distribution boxes, CEE adapters -Manufacturer: Bals, CEE adapter 63A / 32A -Transport dimensions: 255/145/H165 mm -Weight: 3.3 kg

NEW, Genie / Terex adapter with Euro mount, 140 kg dead weight

NEW, Dieci Agri Farmer adapter suitable for Euro mount, 150 kg dead weight, also available with Dieci 25.6 mount

BIG Genie Terex adapter suitable for Manitou mount, - New product, - Year of manufacture: 2025, - Weight: ~ 150 kg, Many other adapters available for a wide variety of mounts !

BIG adapter JCB Q-Fit suitable for Euro mount, NEW, - Year of construction: 2025, - Own weight: 160 kg

NEW, Bobcat 114 cm adapter with Euro mount

NEW, Bobcat adapter 90 cm with Euro mount, 130 kg net weight

NEW, Weidemann adapter suitable for Euro mounting, 150 kg net weight

BIG Adapter Volvo L30 to Euro mount

BIG Adapter Kramer to Euro mount

Attachment adapter for castor mounting, series 5230, D150mm, A202008199/02, Spanntec, new -40% Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Attachment adapter for roll holder, Series 5230, D150mm x 330mm, Spanntec, - Attachment adapter for winding spigot D75, Series 3233, - Easy to place and fix on the carrier head - Mechanical actuation when carrier head is activated Attention: We have the complete winding drive, rewind drive D75mm and D150mm with servo motor, hypoid gear, additional flange, winding spigot and attachment adapte ...

PLC control, connection module for digital electronic modules, terminal module, repeater, adapter teleservice, TS adapter -Manufacturer: Siemens, Simatic S7 TS Adapter V 5.1 -Type: 6ES7 972-0CC35-0XA0 -Dimensions cardboard: 215/115/H40 mm -Weight: 0.4 kg

tool holder, milling holder, milling tool, adapter, intermediate sleeve, extension adapter -Milling holder: adapter -Hole: Ø 59 x 73 mm / Ø 40 x 85 mm -Dimensions: Ø 70 x 158 mm -Weight: 2.4 kg

tool holder, milling holder, milling tool, adapter, intermediate sleeve, extension adapter -Manufacturer: Sandvik Coromant, milling adapter Ovp -Type: C8-391.01-80 125A -Mounting diameter: 80 mm -Functional length L: 125 mm -Transport dimensions: Ø 80 x 173 mm -Weight: 4.5 kg/total

Chilworth JCI 164 High Voltage Adapter General description The JCI 146 is a voltmeter adapter component designed for integration into wider experimental systems. In combination with our JCI 140, the system enables the measurement of live conductors with voltages up to ± 60 kV DC by direct connection with an accuracy of ± 2% (nominal) with minimal load effects on the device under test. The JCI 146's high input impedance and low capacitance are suitable for more accurate DC voltage measurements. Other traditional techniques for directly measuring high voltages (e.g., high-voltage meters, capacitive and resistive divider networks, etc.) often provide inaccurate results due to load effects caused by the measurement setup. This device can be used to cross-check the calibration and accuracy of high-voltage sources by power utilities, calibration test houses and cable manufacture ...

Tool holder, milling holder, milling tool, adapter, clamping unit -Milling tool: Milling adapter ring set -Various sizes: see photos, more pictures can be sent -Dimension box .: 280/180 / H80 mm -Weight: 3.3 kg

Servo drive, controller, converter, controller, controller adapter base -Manufacturer: Siemens, Controller Adapter Base Series 500 -Type: 500-5840 -Dimensions cardboard: 500/250/H180 mm -Total weight: 2 kg

PLC control, connection module for digital electronic modules, terminal module, adaptation capsule -Manufacturer: Siemens, housing adaptation capsule Simatic S5 Ovp -Type: 6ES5 491-OLB11 -Number: 2x housing available -Price per piece -Cardboard dimensions: 310/215/H50 mm -Weight: 0.9 kg/pc.

Pre-filter, intake air filter, air filter housing, air filter housing, alternator air filter, adapter tube -Manufacturer: Mann, adapter tube type 3900025327 -Size: from Ø 200 to Ø 150 mm -Total dimensions: Ø200/H105 mm -Weight: 0.6 kg

Power strip, portable power strip, solid rubber power strip, adapter, construction site power strip -Manufacturer: Gifas, solid rubber distributor adapter 63A / 16A -Transport dimensions: 230/230/H130 mm -Weight: 3 kg

Power strip, portable power strip, solid rubber power strip, adapter, construction site power strip -Manufacturer: Gifas, solid rubber distributor adapter 32A / 16A -Type: 2800 Item No.: 282/301657M/303259/6 -Transport dimensions: 230/230/H130 mm -Weight: 3 kg

PLC extension module, switchgear, control, marshalling module, printed circuit board module, measuring adapter -Manufacturer: Reis Robotics measuring adapter -Type: XMC20 Id.Nr: 2364687 -Number: 2x module available -Price per piece -Dimensions: 45/75/H40 mm -Weight: 0.1 kg

Keyboard, control panel, PLC workstation, programming device, handheld programming device, programming adapter -Manufacturer: Pilz, programming adapter with case -Type: P10 PA 304113 -Dimensions of the case: 230/185/H45 mm -Total weight: 0.4 kg

Tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve -Milling attachments: Adapter intermediate sleeve reducing sleeve SK40 MK1 M16 -Type: 40 x 1 Dimensions: 60/55/H178 mm -Weight: 0.9 kg

Tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve -Milling holders: Adapter intermediate sleeve reducing sleeve SK40 MK2 M16 -Type: 40x2 -Dimension: 60/55/H178 mm -Weight: 0.9 kg

Tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve -Milling holders: adapter intermediate sleeve reducing sleeve SK40 MK5 -Mounting: SK40 -Holder tool: MK5 -Dimensions: Ø 63 x 405 mm -Weight: 5.6 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve: taper reducing sleeve -Type: CM5/4 STAS2293-65 -Dimensions: Ø 45 x 135 mm -Weight: 0.9 kg

PLC controller, connection module for digital electronic modules, terminal module, bus adapter -Manufacturer: Siemens, Bus adapter Simatic ET 200SP -Type: 6ES7193-6AR00-0AA0 6ES7 193-6AR00-0AA0 -Number: 4 modules available -Price: per piece -Dimensions: 70/60/H20 mm -Weight: 0.1 kg/pc.

SPS control, connection module for digital electronic modules, terminal module, repeater, adapter teleservice, TS adapter, connection plug, Profibus plug -Manufacturer: Siemens, Simatic connector plug orig -Type: 6ES7 972-OBB52-OXAO -Number: 3x Profibus plug available -Price per piece -Cardboard dimensions: 75/70/H30 mm -Weight: 0.1 kg/pc.

SPS control, connection module for digital electronic modules, terminal module, repeater, adapter teleservice, TS adapter, connection plug, Profibus plug -Manufacturer: Siemens, Simatic bus connector orig -Type: 6ES7 972-OBB12-OXAO -Number: 4x Profibus plug available -Price per piece -Cardboard dimensions: 60/50/H65 mm -Weight: 0.1 kg/pc.

SPS control, connection module for digital electronic modules, terminal module, repeater, adapter teleservice, TS adapter, connection plug, Profibus plug, Profibusconnector -Manufacturer: Siemens, Simatic bus connector Profibusconnector orig -Type: 6ES7 972-OBB11-OXAO -Number: 3x Profibus plug available -Price per piece -Cardboard dimensions: 60/50/H65 mm -Weight: 0.1 kg/pc.

SPS control, connection module for digital electronic modules, terminal module, repeater, adapter teleservice, TS adapter, connection plug, Profibus plug, Profibusconnector -Manufacturer: Siemens, Simatic bus connector Profibusconnector orig -Type: 6ES7 972-OBB60-OXAO -Number: 2x Profibus plug available -Price per piece -Cardboard dimensions: 60/50/H65 mm -Weight: 0.1 kg/pc.