135,042 used machines on RESALE, but how to find them? Machine Search
Fiat Ducato motorhome equipped with an Elnagh Marlin airframe, put into service on 26/03/1999, with approximately 195,167 km. The vehicle has a complete layout including a kitchen with sink, three-burner stove, refrigerator, storage, convertible dinette, overcab bed and bathroom with toilet and hand shower. It is also equipped with a Fiamma side awning, a rear bike rack and, according to the owner, a solar panel installed on the roof. Around 1,000 km have been covered since major engine work carried out in 2026. A parts invoice dated 04/05/2026, in the amount of €717.01, is available. It mentions in particular the replacement of the cylinder head gasket, the timing kit with water pump, the oil cooler, the glow plugs, the thermostat, the belts and the filters. The engine starts and a video is available. However, the vehicle has not been driven or tested on the road. The gearbox, c ...
The motorcycle has been standing still for several years, but it was put away in working order. The motor is not stuck and rotates. So it serves as a project. Various parts are present such as mirrors, license plate holder, etc. Auction-ID: A3-46098-5672
For sale: beautiful Aprilia Tuono 1000R from 2008. A wonderful naked bike with the powerful V-twin, sporty handling and the character that the Tuono is known for. Tough looks, lots of torque and great sound. Auction-ID: A1-40324-18
Power supply: 220V, 1 ph, 50 Hz, Total electrical power: 1,1 kW, Water slot milling spindle motors: 2 x 0,55 kW / 220 V / 3ph / 300 Hz, Air consumption: 9 lt/min, Air pressure: 6-8 bar, Min. machinable profile height: 40 mm, Max. machinable profile height: 120 mm, Max. machinable profile width: 150 mm. Auction-ID: A1-50595-38
Knaus R12 / Sun I – Integral motorhome 2025 – 4,000 km Knaus R12 integral motorhome, based on Fiat Ducato chassis, put on the road on 12/05/2025 and with approximately 4,000 km. Vehicle equipped with a 2,184 cc diesel engine, developing 118 kW, or approximately 160 hp, with Euro VI emission standard and 6-speed manual gearbox. Features: Brand: Knaus Model: R12 Type: Integral motorhome Chassis: Fiat Ducato Fuel: Diesel Displacement: 2,184 cc Power: 118 kW / approx. 160 hp Transmission: 6-speed manual gearbox Mileage: approx. 4,000 km First registration: 12/05/2025 WINE: ZFA25000002W04315 Number of axles: 3 Number of seats: 4 MMA: 5,000 kg Indicated payload: 1,165 kg Maximum mass of the assembly: 6,000 kg Braked trailer: 2,000 kg Unbraked trailer: 750 kg The cell offers a comfortable layout including a cabin with swivel seats, a living room with benches and table, a front overhead be ...
Type: Type 2 T1 / Combi Split Type on paper: Motorhome First registered: 15/09/1974 Fuel: Gasoline Gearbox: Manual WINE: BH341117 Papers : Belgian MOT: valid until 16/02/2024 – currently expired Visible layout Very nice interior design in a retro orange and white style, including in particular: Two-tone benches and upholstery Double sleeping in the back Dining area with table Storage furniture Stainless steel sink with tap Plenty of storage space Matching curtains Large glass/panoramic roof with multiple glazing Large roof opening Roof rack with wooden slats Rear Ladder Front exterior sun visor Wheels with chrome hubcaps Whitewall tires Front and rear bumpers with protectors General presentation of vintage/surf style Volkswagen Type 2 T1 Split converted into a motorhome, first registered in 1974. Petrol vehicle with manual gearbox and Belg ...
Suzuki 8 hp short shaft Control stick version Circuit in handle Incl 12 liter tank Plane wings Viewing by appointment only Auction-ID: A1-40324-33
Vespa from 1996, starts and works well, completely in order, with papers. Regarding the type B class, 45km PU Collection in Kluisbergen. Auction-ID: A3-46098-12000
Weight 25 kg Auction-ID: A1-50595-41
Superb Kawasaki ZL1000 Eliminator, a motorcycle with a strong character that combines the style of a true cruiser with the muscular mechanics that have made Kawasaki's reputation. An emblematic model of the 80s, today particularly interesting for the lover of classic Japanese motorcycles, youngtimers or simply for those looking for a machine that is frankly out of the ordinary. This ZL1000 is equipped with an imposing 997 cc in-line 4-cylinder petrol engine, combined with a manual gearbox and a cardan shaft final drive. A mechanical architecture that fully contributes to the character of this Eliminator. Aesthetically, the bike looks great with its high-gloss black livery, numerous chrome elements and the characteristic long fuel tank. The chrome-plated twin exhaust, alloy wheels, dual rear shock absorbers and chrome front fender further enhance its powerful and timeless style. The ...
BMW S 1000 R, first registered on 30/04/2015, equipped with the 999 cc in-line four-cylinder engine developing 118 kW, or approx. 160 hp. This sporty roadster motorcycle is equipped with a 6-speed manual gearbox and has around 66,100 km on the odometer. The bike features a Black Storm Metallic livery and features an inverted fork, an analogue and digital instrument cluster, ABS-equipped brakes, as well as 120/70 ZR17 tyres at the front and 190/55 ZR17 at the rear. According to the BMW option sheet, it has DTC, DDC, Pro riding modes, Sport package, heated grips and a gear shift assistant, among other things. A Wunderlich-branded smoke bubble, red anodized adjustable levers and axle guards are also visible in the photos. The motorcycle is accompanied by documents including registration certificates, certificate of conformity, BMW owner's manual and vehicle option sheet. Main equipm ...
Start and drive, this one was wrapped in orange for aperol. Wrap can be removed, original color is red. Auction-ID: A3-46098-5705
Set of 9 vintage Kreidlers, mainly from the Florett range, including different versions and configurations. General characteristics depending on the model: Brand: Kreidler Range: Florett Visible models/versions: RS, RS Elektronik, GT and other Florett Quantity: 9 pieces Engine: single-cylinder 2-stroke Cylinder capacity generally: approx. 50 cm³ Cooling: Air Transmission: Chain Several models with chrome tank Spoked wheels and alloy wheels depending on the model Several motorcycles with luggage racks Some motorcycles are modified/prepared Condition and configuration varies depending on the bike Operation see video The Florett RS is known in particular as a 49/50 cc, 2-stroke single-cylinder air-cooled version, with some versions equipped with a 5-speed gearbox. The exact characteristics vary greatly depending on the year and the version. Documents Acco ...
Voltage: 24 V, Starter motor power: 6,2 kW, Number of mounting holes: 3, Number of threaded holes: 0, Number of pinion teeth: 11, Terminals: 30, 50, 31, Flange diameter: 92 mm, Direction of rotation: Counterclockwise, Pinion rest position: 48 mm, Starter design: Independently supported bearings, Bore diameter: 13,5 mm, Bore diameter 2: 13,5 mm, Bore diameter 3: 13,5 mm, Length: 391 mm, Position: Right, Mounting angle: 84 degrees, Power connection opening angle: 160 degrees, Mounting hole angle: 84 degrees. Auction-ID: A1-50595-17
Parallel Gear Motor Manufacturer: Bauer Model No.: BF20-04/DHE08XA4 New part from stock, may show traces of storage. Internal No. 628 079 398072039291
Hydraulic motor Danfoss OMV 50 The spare part is in good condition, but this is still a used item that shows or may show slight signs of wear. Internal number : 628 457 398079628098
At 15000 it was serviced, maintenance history available, DB killer is not in the exhaust on the video but is present if desired. Auction-ID: A1-47420-265
Connection: 220-480V-50/60 Hz Auction-ID: A7-50858-60
Frame looks good and engine runs, front rim bent, counter and headlight off and other damage, km documentation available with the damage report. Auction-ID: A1-47420-266
Technical Puma 2. Dimensions: 10.28 x 3.55 meters. In 2026 equipped with 2 x Volvo Penta KAD 42 diesel engines with Duo-Prop drives. The engines have recently undergone major maintenance. During installation, the engines were also equipped with new bellows and Morse cables. The engines were built in with 960 operating hours and have since made about 10 sailing hours. The boat sails very well. The other electronics and accessories still need to be checked. Auction-ID: A1-47420-95
Equipped with: Hypalon tubes, GPS, Radio with speakers, Anchor locker, Radar bracket, Navigation lights, Steering console, Evinrude 35hp Outboard engine, 3-blade propeller, Unbraked trailer With road lights Auction-ID: A1-47420-94
Tohatsu 15 hp four stroke EFI in mint condition runs perfectly running hours +/- 40 Year of manufacture 2023 Long tail Remote control Electric start 12 litre tank Auction-ID: A1-40324-143
Connection: 220-480V-50/60 Hz Auction-ID: A7-50858-59
Engine & Performance • Engine: 1602cc, air-cooled V-twin • Power: Approximately 63 hp (47 kW) at 4,000 rpm • Torque: 134 Nm at 2,250 rpm • Fuel system: Carburettor (to later models with injection) • Gearbox: 5-speed with a toothed belt drive Chassis & Suspension • Frame: Tubular steel frame • Front suspension: Telescopic fork (43 mm) • Rear suspension: Dual shock absorbers (adjustable) • Brakes: • Front: Single disc brake (298 mm) • Rear: Single disc brake (320 mm) Dimensions & Weight • Seat height: 710 mm • Dry weight: Approx. 320 kg • Tank capacity: 20 litres Other features • Classic cruiser design with lots of chrome • Wide and low riding position for comfortable long rides • Timing belt drive, which requires less maintenance than a chain • Many aftermarket options including vance & hinces exhaust system and leather cases This Yamaha Wildstar XV ...
Specifications: - Brand: Kongskilde - Manufacturer: Kongskilde Industries A/S, Denmark - Product Type: Industrial Centrifugal Fan / Transport Fan - Type of designation installation: 100503133 - Electrical power: 15 kW - Power supply: 3 × 400 V AC - Frequency: 50 Hz - Rated current: approx. 33.1–34.6 A - Maximum pre-fuse: 50 A - Short-circuit strength / IK Max: 15 kA - Grounding system: TNS - Control cabinet protection class: IP55 - Maximum ambient temperature: 40 °C - Industrial version Fan: - Centrifugal/radial fan - Electrically powered - Large round suction/outlet connections - Metal fan housing - Industrial range - Suitable for connection to pipe/conveyor system - Marking 1800 visible on fan housing Drive: - 15 kW electric motor - 3-phase electric drive - Transmission via belt drive - Drive equipped with protective cover - Electric motor mounted on joint machine frame Equipped wi ...
Connection: 220-480V-50/60 Hz Auction-ID: A7-50858-57
Equipped with: vibrating motor, knife for big bag cutting, attachment for dust catching, funnel valve, standing platform, air cylinders for doors Auction-ID: A1-47393-210
Equipped with: 3x vibration motor Auction-ID: A1-47393-218
Equipped with: 5x electric motor with staging boxes, for the meters of pipes there is also sufficient meters of screws, match, elevator screws, (1x570, 1x 630, 1x 260, 1x 140, 5x380, 4x 340) Auction-ID: A1-47393-217
The engine is originally black but is wrapped in blue, the exhaust is visibly leaking. Auction-ID: A1-47420-261
Axial piston variable displacement motor in helical disc design Auction-ID: A1-50849-197
Axial piston variable displacement motor in helical disc design Auction-ID: A1-50849-195
: neu : ca. 10 Wochen ab Auftrags : Türkei : 16600 € : 318.72 € : 1050 mm : 6 mm : 30 1/min : 2.3 ° : 750 mm : 7,5 kW : 800 mm : 530 mm : 1355 mm : 1720 mm : 1630 mm : 1230 mm : 2000 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 4 cutting edges on the lower blade 1000 mm squaring arm with scale, T-slot, and flip stop 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Balls in the table Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 25000 € : 480 € : 2050 mm : 6 mm : 30 1/min : 2.3 ° : 750 mm : 7.5 kW : 800 mm : 530 mm : 2355 mm : 2720 mm : 1630 mm : 1230 mm : 3200 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 4 cutting edges on the lower blade 1000 mm squaring arm with scale, T-slot, and flip stop 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Balls in the table Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 19800 € : 380.16 € : 1550 mm : 6 mm : 30 1/min : 2.3 ° : 750 mm : 7,5 kW : 800 mm : 530 mm : 1855 mm : 2220 mm : 1630 mm : 1230 mm : 2900 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 4 cutting edges on the lower blade 1000 mm squaring arm with scale, T-slot, and flip stop 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Balls in the table Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: HARDINGE Year: 2005 Type: CNC Motorized Tool Lathe with C-Axis Numerical Control: FANUC 21i-TB Bar Capacity: Ø 51 mm Max. Turning Circle: Ø 310 mm Max. Turning Length: 470 mm Chuck: Ø 200 mm (8\") Bed Inclination: 45° Spindle: 50–5,000 rpm – 18.5 kW (max) / 11 kW (continuous) Turret: 12 stations, all motorable positions Motorized implements: 4,000–5,000 rpm – 3.7 kW Fast feeds: X/Z 19 / 24 m/min Accuracy: ±0.005 mm Included equipment: Programmable C-axis (0.001°), IEMCA Boss 545 bar feeder Weight (kg): approx. 4200 Auction-ID: A1-50714-4029
CNC lathe for turning and machining metal parts. CNC control: Fanuc 16 T AA Max. turning diameter: 165 mm Turning length: 100 – 340 mm Diameter above bed: 220 mm Main spindle speed: 50 – 5,000 rpm Main spindle power: 5.5 / 7.5 kW Main spindle bar passing: 65 mm Sub-spindle speed: 50 – 5,000 rpm Counter-spindle power: 3.7 / 5.5 kW Counter-spindle bar passage: 42 mm C-axis: 0.001° Turrets: 2 Tool positions: 2 × 16 Motorized tools: 2 × 16 positions Strokes: X 175 mm / Z 240 – 680 mm Total power: 41 kVA Dimensions (mm): 3,500 × 2,800 × 2,000 Weight (kg): 5,500 Serial No.: 1105-02957 Auction-ID: A1-50714-4047
: neu : ca. 12 Wochen ab Auftrags : Türkei : 16400 € : 314.88 € : 2050 mm : 3 mm : 35 1/min : 1.5 ° : 750 mm : 3 kW : 800 mm : 520 mm : 2720 mm : 1575 mm : 1230 mm : 1900 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 2 cutting edges on the lower blade 800 mm squaring arm with scale 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: DMG GILDEMEISTER Year: 2008 Type: CNC lathe with motorized tools with C and Y axes Numerical control: Heidenhain iT Plus Max. turning diameter: 400 mm Max. turning length: 600 mm Distance between tips: 615 mm Main spindle: 20–6,000 rpm – 16 kW – max. torque 155 Nm Bar capacity: Ø 52 mm – spindle bore 61 mm C-axis: 0.001° resolution Turret: 12 positions – 12 motorized tools (5,000 rpm, 3.7 kW) Strokes: X 160 mm / Z 450 mm / Y ±32 mm Fast feeds: X 60 m/min – Z 45 m/min Attachments: Chip conveyor, 12 bar HP coolant, workpiece catcher, fixed tool holders (5), motorized tool holders (3), hydraulic system Dimensions (mm): 8000 × 3000 × 2700 Weight (kg): approx. 4500 Remarks: Machine in good condition, powered on. Serial number included in the description. Auction-ID: A1-50714-4002
plate width: 1020 mm plate thickness: 4 mm pre-bending: - diameter of upper rolls: 110 mm total power requirement: 2,2 kW weight of the machine ca.: 900 Kg dimensions of the machine ca.: 2,1 x 0,7 x 1,2 m Fasti three-roll plate bending machine / plate rolling machine In excellent condition. The machine was completely overhauled in 2016. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: INDEX Year: 2005 Type: Moving spindle CNC lathe with motorized tools and C-axis Numerical control: Siemens Sinumerik 840D Powerline Chuck: Ø 160 mm Max. rotation diameter: Ø 180 mm Strokes: X-axis 520 mm / Z-axis 200 mm Fast feeds: X/Z 40 / 30 m/min Moving spindle: 5,000 rpm – 13 kW (100%) / 20 kW (40% ED) – max. torque 105 Nm C-axis: 0.001° resolution Turret: 12 positions – all motorable stations – VDI 30 Motorized tools: up to 6,000 rpm – 8.5 kW Power supply: 400 V / 50 Hz / 3 phases – installed power approx. 25 kW Weight (kg): approx. 4500 Auction-ID: A1-50714-4039
maximum number of results exceeded
please refine your search
1.000 € 
