136,471 used machines on RESALE, but how to find them? Machine Search
sheet width: 1050 mm plate thickness: 2.0 mm roll length: 1070 mm roll diam. toproll: 75.0 mm engine output: 1.5 kW weight: 325 kg range L-W-H: 1530 x 700 x 1160 mm Exhibition machine - like NEW not yet in use () Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1320 mm plate thickness: 2.5 mm ST thickness at Niro-steel: 1.2 mm blade length: 1350 mm no. of strokes: 34 Hub/min back stop - adjustable: max. 825 mm cutting angle: 1.5 ° work height max.: 810 mm Control: konv. engine output: 3.0 kW weight: 1100 kg range L-W-H: 1950 x 1450 (2000) x 1200 mm Exhibition machine - like new Never been used () Special price upon request Features: - Robust electro-mechanical sheet metal shear - Heavy-duty / robust drive motor - Manual backgauge, including analog position indicator Adjustment range max. 825 mm - Manual cutting gap adjustment - 2x table side stops including mm scale - 1x front stop bar - manually adjustable - 2x front support arms - Grip recess in the front work table - 1x freely movable foot switch, including emergency stop button - Control cabinet/operating panel - front right - Rear safety device - Rear sheet chute - Connec ...
sheet width: 3050 mm plate thickness: 3.0 mm ST pre-bending capacity: 3.0 mm ST upper roll diameter: 170 mm lower roll diameter: 170 mm side roll diameter: 180 mm Control: konv. 0: 380 V total power requirement: 3.0 KW weight: 4250 kg In good condition With new rubber-coated top roll () Also suitable for bending non-ferrous metals - in checked conditions - machinevideo - https://www.youtube.com/watch?v=ZW8Us6Hbm3E Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment Including digital position display - Manual bottom roll adjustment Via hand crank - Including conical bending device Inclined bottom roll and side rolls Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes Top roll must be raised before opening the storage (e.g., forkl ...
: gebraucht : 2004 : 9726 : prompt, Zwischenverkauf v : Türkei : 6750 € : 1 : 1350 mm : 3 mm : 35 1/min : 1.5 ° : 550 mm : 3 kW : 2 Stk. : 850 mm : 400 mm : 1700 mm : 1350 mm : 1200 mm : 950 kg manualback gauge automatic sheet hold down hold down with rubber pads moveable foot switch side support arm 2 supporting arms user manual in GERMAN does not complie with the German UVV and Austrian AMVO BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:https://www.hesse-maschinen.com/en/lp/used-machines The data for this ad was created with ModulMW ...
new
: neu : ca. 12 Wochen ab Auftrags : Türkei : 35400 € : 676.14 € : 3030 mm : 6 mm : 6 mm : 4 mm : 220 mm : 5.5 kW : 4750 mm : 1200 mm : 1150 mm : 4920 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 53700 € : 1014.93 € : 2050 mm : 16 mm : 16 mm : 13 mm : 13 mm : 10 mm : 260 mm : 260 mm : 200 mm : 1,5 / 6 m/min : 7.5 kW : 4300 mm : 1600 mm : 1550 mm : 6100 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 ...
: neu : ca. 10 Wochen ab Auftrags : Türkei : 49900 € : 953.09 € : 2050 mm : 13 mm : 13 mm : 10 mm : 10 mm : 8 mm : 245 mm : 245 mm : 180 mm : 1,5 / 6 m/min : 7.5 kW : 4300 mm : 1600 mm : 1470 mm : 5450 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % ...
: neu : ca. 10 Wochen ab Auftrags : Türkei : 60600 € : 1145.34 € : 3100 mm : 10 mm : 10 mm : 8 mm : 8 mm : 6 mm : 260 mm : 260 mm : 200 mm : 1,5 / 6 m/min : 7.5 kW : 5350 mm : 1600 mm : 1550 mm : 7685 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % o ...
: neu : ca. 10 Wochen ab Auftrags : Türkei : 57000 € : 1077.3 € : 2550 mm : 13 mm : 13 mm : 10 mm : 10 mm : 8 mm : 260 mm : 260 mm : 200 mm : 1,5 / 6 m/min : 7.5 kW : 4800 mm : 1600 mm : 1550 mm : 6800 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % ...
: neu : 2026 : 090187 : prompt, Zwischenverkauf v : Türkei : 14400 € : 276.48 € : 1 : 1350 mm : 3 mm : 35 1/min : 550 mm : 3 kW : 2 Stk. : 850 mm : 400 mm : 1900 mm : 1350 mm : 1260 mm : 1060 kg manualback gauge automatic sheet hold down hold down with rubber pads moveable foot switch side lay 2 supporting arms light barriers on the back of the machine user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 43000 € : 821.3 € : 2050 mm : 10 mm : 10 mm : 8 mm : 10 mm : 8 mm : 8 mm : 6 mm : 200 mm : 200 mm : 180 mm : 6 m/min : 3850 mm : 1350 mm : 1290 mm : 3750 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 13400 € : 257.28 € : 1550 mm : 3 mm : 110 mm : 3 m/min : 2.2 kW : 2700 mm : 750 mm : 1000 mm : 1200 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS (PRICES ON REQUEST): hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The engine runs, trade-in, built around 2010. Auction-ID: A1-47420-264
: neu : ca. 12 Wochen ab Auftrags : Türkei : 38000 € : 725.8 € : 2050 mm : 8 mm : 8 mm : 6 mm : 8 mm : 6 mm : 6 mm : 4 mm : 180 mm : 180 mm : 150 mm : 5 m/min : 3850 mm : 1350 mm : 1290 mm : 3300 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2024 : 9722 : prompt, Zwischenverkauf v : Türkei : 17300 € : 332.16 € : 1 : 2050 mm : 3 mm : 130 mm : 3,5 m/min : 2.2 kW : 3200 mm : 750 mm : 1000 mm : 1500 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor HARDENED ROLLS manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in GERMAN OPTIONS (PRICES ON REQUEST): (time of delivery with options approx. 8 weeks) Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 7000 € : 135.1 € : 1550 mm : 2 mm : 90 mm : 6 m/min : 1.5 kW : 2130 mm : 700 mm : 1200 mm : 545 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN or ENGLISH OPTIONS: powered back roll EUR 1.000,- digital readout EUR 1.100,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm : 25 mm : 25 mm : 16 mm : 20 mm : 18 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...
: neu : ca. 12 Wochen ab Auftrags : Türkei : 29000 € : 553.9 € : 2050 mm : 4 mm : 4 mm : 3 mm : 3 mm : 2 mm : 130 mm : 130 mm : 130 mm : 5 m/min : 2,2 + 1,1 kW : 3800 mm : 1150 mm : 1110 mm : 2450 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2024 : 9738 : prompt, Zwischenverkauf v : Türkei : 20300 € : 389.76 € : 1 : 1530 mm : 6 mm : 6 mm : 4 mm : 150 mm : 4 kW : 3100 mm : 1120 mm : 1020 mm : 2100 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 5100 € : 98.43 € : 1050 mm : 2 mm : 75 mm : 1.5 kW : 1610 mm : 700 mm : 1160 mm : 385 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch user manual in GERMAN or ENGLISH OPTION (PRICE ON REQUEST): hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 13200 € : 253.44 € : 1270 mm : 5 mm : 140 mm : 3,5 m/min : 2.2 kW : 2470 mm : 750 mm : 1000 mm : 1350 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS (PRICES ON REQUEST): hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 Wochen ab Auftragse : Italien : 2000 mm : 11 mm : 11 mm : 7 mm : 8 mm : 6.4 mm : 225 mm : 215 mm : 165 mm : 8 m/min : 3950 mm : 1200 mm : 1200 mm : 4450 kg Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the to ...
Auction-ID: A1-50849-279
: neu : ca. 12 Wochen ab Auftrags : Türkei : 73200 € : 1383.48 € : 2050 mm : 20 mm : 20 mm : 16 mm : 16 mm : 12 mm : 280 mm : 280 mm : 220 mm : 1,5 / 5 m/min : 16.5 kW : 4350 mm : 1700 mm : 1850 mm : 8550 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT (PRICES ON REQUEST): infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length harden ...
: neu : ca. 10 Wochen ab Auftrags : Türkei : 7200 € : 138.96 € : 4 mm : 200 mm : 300 nm : 4 Stk. : 126 mm : 10 1/min : 1475 mm : 550 mm : 1200 mm : 460 kg reduction motor with brake system movement of rolls with foot pedal adjustable idle roll steel shafts with bronze bushings 4 set of rolls complete with stand user manual in GERMAN or ENGLISH according to CE rules ALTERNATIVE (PRICE ON REQUEST): Version HIBKS 4,0 with hydraulic top roll adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 12 Wochen ab Auftrags : Türkei : 33000 € : 630.3 € : 2530 mm : 6 mm : 6 mm : 4 mm : 190 mm : 5.5 kW : 4250 mm : 1200 mm : 1150 mm : 3750 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm : 28 mm : 28 mm : 22 mm : 26 mm : 23 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...
: neu : ca. 10 Wochen ab Auftrags : Türkei : 5500 € : 106.15 € : 2.5 mm : 160 mm : 250 nm : 4 Stk. : 96 mm : 13 1/min : 1475 mm : 550 mm : 1200 mm : 320 kg reduction motor with brake system movement of rolls with foot pedal adjustable idle roll steel shafts with bronze bushings 4 set of rolls complete with stand user manual in GERMAN or ENGLISH according to CE rules ALTERNATIVE (PRICE ON REQUEST): HIBKS 2,5 with hydraulic upper roll feed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 10500 € : 201.6 € : 1050 mm : 4 mm : 110 mm : 2.2 kW : 1100 mm : 750 mm : 1000 mm : 990 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS (PRICES ON REQUEST): hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 12 Wochen ab Auftrags : Türkei : 27800 € : 530.98 € : 3030 mm : 4 mm : 4 mm : 2 mm : 180 mm : 4 kW : 4600 mm : 1120 mm : 1020 mm : 4250 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 48100 € : 918.71 € : 2550 mm : 9 mm : 9 mm : 7 mm : 7 mm : 5 mm : 220 mm : 220 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 4900 mm : 1150 mm : 1250 mm : 4600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of r ...
Article: three-phase current motor Manufacturer: Antriebstechnik Bauknecht Type: RFV 22/4-75P e.g. to use as spindle motor for Schutte multispindle automatic lathe SF51Dnt Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
: neu : ca. 10 Wochen ab Auftrags : Türkei : 46300 € : 884.33 € : 2050 mm : 11 mm : 11 mm : 9 mm : 9 mm : 7 mm : 220 mm : 220 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 4080 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm : 18 mm : 18 mm : 12.1 mm : 15 mm : 13 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double line ...
new
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 70300 € : 1328.67 € : 3100 mm : 8 mm : 8 mm : 6 mm : 6 mm : 5 mm : 240 mm : 240 mm : 190 mm : 825 mm : 11 kW : 4880 mm : 1160 mm : 1200 mm : 6450 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls ar ...
new
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 95000 € : 1795.5 € : 3100 mm : 13 mm : 12 mm : 8 mm : 13 mm : 10 mm : 10 mm : 8 mm : 270 mm : 270 mm : 230 mm : 50 mm : 1155 mm : 15 kW : 5310 mm : 1660 mm : 1590 mm : 10050 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software ...
new
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 83800 € : 1583.82 € : 2550 mm : 15 mm : 15 mm : 13 mm : 12 mm : 12 mm : 10 mm : 270 mm : 270 mm : 230 mm : 50 mm : 1155 mm : 15 kW : 4760 mm : 1660 mm : 1155 mm : 8950 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll le ...
: neu : ca. 10 Wochen ab Auftrags : Türkei : 52700 € : 996.03 € : 2550 mm : 10 mm : 10 mm : 8 mm : 8 mm : 6 mm : 245 mm : 245 mm : 180 mm : 1,5 / 6 m/min : 7.5 kW : 4800 mm : 1600 mm : 1470 mm : 6170 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of ...
: neu : ca. 10 Wochen ab Auftrags : Türkei : 103100 € : 1948.59 € : 2550 mm : 25 mm : 25 mm : 20 mm : 20 mm : 16 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 5500 mm : 2000 mm : 1900 mm : 13000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommend ...
new
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 98600 € : 1863.54 € : 3100 mm : 16 mm : 16 mm : 13 mm : 16 mm : 14 mm : 12 mm : 300 mm : 300 mm : 240 mm : 50 mm : 1140 mm : 18.5 kW : 5310 mm : 1660 mm : 1140 mm : 11100 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software sol ...
: neu : ca. 10 Wochen ab Auftrags : Türkei : 36300 € : 693.33 € : 2050 mm : 8 mm : 8 mm : 6 mm : 6 mm : 4 mm : 180 mm : 180 mm : 150 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 3790 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of r ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 1500 mm : 6 mm : 6 mm : 4 mm : 5 mm : 4 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear guid ...
: neu : 2024 : 9739 : prompt, Zwischenverkauf v : Türkei : 22300 € : 428.16 € : 1 : 1 : 2030 mm : 6 mm : 6 mm : 5 mm : 170 mm : 4 kW : 3600 mm : 1020 mm : 1120 mm : 2400 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 27 mm : 27 mm : 18 mm : 23 mm : 20 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...
: neu : ca. 10 Wochen ab Auftrags : Türkei : 31600 € : 603.56 € : 2050 mm : 6 mm : 6 mm : 4 mm : 4 mm : 3 mm : 150 mm : 150 mm : 130 mm : 1,5 / 6 m/min : 4 kW : 4250 mm : 960 mm : 1100 mm : 2800 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll ...
maximum number of results exceeded
please refine your search
500 € 
