ac servo motor used for sale

CASI roller conveyor accumulation roller conveyor 3000-687-610 RA1998 Make: CASI Running direction: both directions Roller width (RB): 610 mm Nominal/outer width (NB): 685 mm Length: 3000 mm Stowage space size: 760 mm Roller diameter: 50 mm Roller distance: 75 mm Motor Roller conveyors: Interroll EC100 24V Height frame: 90 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC100 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guide one-sided Side guides on both sides Condition: functional and visually good condition Features: condition: very good (used) scope of delivery: without supports and side guides Driven: YES Conveying length in mm: 3000 Roll division in mm: 75 nominal voltage: 24V Conveyor speed m / s: bis 1,25m/s Jam detection: Lichtschranke Stowage spaces: 4 Roll width in mm: 610 Nominal / outside width i ...

As good as new reversible base jaws Insert: Three-jaw chuck with helical toothing, also power chucks. Manufacturer: Three-jaw chuck FORKARDT-F400; RÖHM-Duro-400→ (FOKARDT; ROHM; SCHUNK; KITAGAWA) Name of the base jaws: for example: MFG 400; SFG400 Three-jaw wedge rod chuck ø 400mm: Hand chuck F400; F500L DURO400; DURO 500 Rota-S 400; Rota-S500 THW500 F B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La= hole spacing; J=Za= tooth spacing; S= groove for top jaw or base jaw W = 45 mm H = 55 mm L = 160 mm N = 30mm S = 18mm La= 60mm Thread M16 x 1.5 Weight approx. 9-10 Kg /set

number: 100 Positionen : 28 mm condition: neu weight: 280 kg dimensions: 1,2 x 0,5 x 1,3 m XXL starter package, consisting of: - 15x – standard clamping pliers - 5x – multi-clamp pliers - 10x – side tensioners with eccentrics - 15x – Loose cam H30 - 10x – Loose cam H100 - 2x – pipe insertion cam series - 10x – quick release bolts - 10x – stop block 15mm - 4x – Right Angle XL - 6x – Right angle - 6x – angle of attack - 1x – box - 1x – Insert holder - 1x – Allen key - Tool trolley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PE tank, upright, suitable for AHL, ASL, sulfuric acid, extra strong PE tank with a volume of 9,600 L Dimensions: Ø 1.88 m × 4.00 m high Flat bottom

Transnorm accumulation roller conveyor 24V 2333-670-655 RA2148 Make: Transnorm Running direction: both directions Roller width (RB): 655 mm Nominal/outer width (NB): 670 mm Length: 2332mm, 4 pieces in stock Roller diameter: 50 mm Roller spacing: 60 mm Roller conveyor motor: SEW roller motor 24V Electrical data: 220V AC supply line drive, via loop-through to each motor controller, 24V light reflector Frame height: 100 mm one element has 3 storage spaces with a size of approx. 800 mm Conveying speed: adjustable in steps with roller drum motor Optionally available: Supports Side guide on one and both sides Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) nominal voltage: 24V, 220V Conveying length in mm: 2333 Nominal / outside width in mm: 670 Roll width in mm: 655 Roll division in mm ...

amount: 39 STK Change gear set for Reishauer NRK. Change gears - number of teeth: - 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumotec Workpiece Accumulator PWS 100 Year of construction: 06/2013 Plate diameter 220 mm Number of plates: 20 pieces Height 1200 mm +/-100 mm adjustable Width 780mm Length 3150mm

amount: 9 STK Change gear set for Reishauer NRK. Change gears - number of teeth: - 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 63 STK Change gear set for Reishauer NRK. Change gears - number of teeth: - 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 13 STK Change gear set for Reishauer NRK. Change gears - number of teeth: - 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sensor-actuator distributor, distributor strip -Connection: 15 - 30 V DC -3 pole -Distributor: 4-way -Weight: 0.1 kg

amount: 26 STK Change gear set for Reishauer NRK. Change gears - number of teeth: - 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Condition: New (traces of storage available) Part Number: 8256016 Serial Number: 19293766 Type: 1724 Suitable for: Mitsubishi S12R

amount: 107 STK Change gear set for Reishauer NRK. Change gears - number of teeth: - 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

accuhead machine for containers up to 40 ltr. Extruder 90/24D. accuhead 6 ltr. Clamping force 350 kN. Cables partially renewed. Oil tank and pipes cleaned. New control system is prepared (B&R) and can be installed at short notice

Sensor-actuator distributor, distributor strip -Connection: 15 - 30 V DC -Distributor: 8-way -M12: x 1 screw connections -Weight: 90 g

Sensor-actuator distributor, distributor strip -Connection: 15 - 30 V DC -Distributor: 6-way -Weight: 90 g

Conveyor belt/accumulation conveyor with belt flap: - With 3 own drives - With 3 waiting positions - With its own control system - Length 600 + 600 + 800 mm = 2 m total - Max. speed 90 m/min. (adjustable via frequency converter) - Max. load 25kg/m - Max. stacking height 500 mm Application/Functionality: - Allows you to quickly traverse production lines without having to walk around them or climb over them with a ladder. Conveyor belt holds when belt flap is lifted. - If the following machine is occupied, the bundles/packages are stopped at three consecutive waiting positions until they are released by the following machine. - Contacts for release signal from upstream and downstream machine with plug connection 24V

Mosca accumulation conveyor STF (timed belt conveyor) Condition: overhauled, serviced, fully functional, ready for use (new bearing, 4 x new transport belts/belts, etc.) Total length 1 meter (2 x 500 mm) Equipped with 2 waiting positions Detection of products by means of 2 integrated photocells Equipped with 2 drives Speed infinitely adjustable by means of frequency converter in the electrical cabinet Equipped with contact plug for pre- and redesigned machine (potential-free, 24V) Documentation: Operating instructions, spare parts catalogue and electrical diagram available If the following machine is not ready, the products are stopped one after the other at the two respective waiting positions. As soon as the release signal from the downstream machine is available, the products are transported on again.

Conveyor belt / belt flap / accumulation conveyor Working height approx. 850 mm, can be adjusted. Length approx. 600 mm Width approx. 450 mm Equipped with photocell to stop product when downstream machine occupies. Equipped with its own drive (attention, currently no own control). Equipped with recessed handle for easy product removal.

Conveyor belt / belt flap / accumulation conveyor Working height approx. 850 mm, can be adjusted. Length approx. 800 mm Width approx. 450 mm Equipped with photocell to stop product when downstream machine occupies. Equipped with function pass-through flap -> straps stop as soon as the flap is lifted. Equipped with its own drive and controls. Fixed transport speed, no frequency converter installed. Machine runs flawlessly. New conveyor belts were installed.

as good as new 1400 x 420

Nominal force, kN 2500 Slider stroke, mm 400 Number stroke per minute 25 adjustment mm 260 Distance between table and slider, mm 750 Main motor power kW 47 Table size width / length mm 1250/2500 Dimensions of the machine Length Width Height (mm) 4555_2900_5855 Weight kg 50100

Modular Roll Mat Chain - new 1525 x 340

Auxiliary switch for actuator, air damper -Manufacturer: Belimo -Type: S2A -unused from: warehouse liquidation -Dimensions: 185/120/H50 mm -Weight: 300 g

Conveyor belt / accumulation conveyor / belt conveyor Working height approx. 850 mm, can be adjusted. Length 1000 mm Width approx. 500 mm Equipped with photocell to stop product when downstream machine occupied (contact for pre and redesigned machine available). Equipped with its own drive and controls. Transport speed is infinitely adjustable via potentiometer.

Access ramp set -Driveway width: 170 mm -Height: 230 mm -Dimensions: 810/290/H270 mm -Weight: 10 kg

Sensor-actuator distributor, distributor strip -Type: SAI-8-MMS 4P M12 -8-way: distributor -Weight: 800 g

number: 10 Positionen weight: 30 kg condition: neu : 28 mm P-Set 1:27 pieces, 28mm system (15mm), consisting of: Clamps: 5 Sk. 100 / 350mm Stop: 2 pieces 500mm Stop: 2 pieces 150mm Angle: 2 pieces 175 x 175mm Flat angles: 2 pieces. 350 x 250mm Flat angles: 2 pieces 275 x 150mm Eccentric discs 2 pcs. 100mm Quick release bolts: 10 pcs. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Linear drive, linear gearbox, lifting gearbox, spindle drive -Manufacturer: Norgren -Type: M/46025B/M/320 -Stroke: 320 mm -Piston: 25 mm -Dimensions: 520/70/H60 mm -Weight: 1.6 kg

Precise 0,6kw ESC 3043 +Control Unit 50k 1min. pneum. Tool change D.4mm Total weight 15kg. Only the spindle without cable weighs approx. 3.5kg Pneumatic collet/tool change. Diameter 4.00mm Max. speed 50,000, minimum 10,000 is specified. According to the controls, however, it somehow goes up to 6000 down. Water cooling is necessary during operation, this is all described in the original operating instructions. Water cooling is not included. The requirements are described. There is at least talk of liquid cooling on the technical drawing. Very good used condition, full function. You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice. 24 63 87 F1448 (internal article number)

suitable for Peddinghaus profile steel shears Effective length 2,000 mm

Pressure reducers, pressure regulators, bladder accumulators, high pressure bladder accumulators, hydraulic accumulators -Pressure accumulator: with shut-off valve -Type: SA1 OM25 T100 -Dimensions: 740/113/H200 mm -Weight: 15 kg

COOLANT UNIT for DMU 160P. General Aspects COOLANT TANK CAPACITY (L): 1.300 FILTER CAPACITY (L/MIN): 600 MOTOR: MOTOVARIO SW040 T 100 POWER (KW): 0,12

KNOLL Chip Conveyor + Coolant Tank for DMU 200 TYPE: 375 S-2/100 TOTAL LENGTH (mm): 4350 TOTAL WIDTH (mm): 1180 BELT DIMENSIONS (mm): 1840 x 375

Centricator CO-S Haff Schneider OVP New Centering Device Circle Zero Point Meter Total weight 770 grams More dimensions can be found in the pictures New and unused in original packaging. These are only open for viewing. Packaging with slight traces of storage You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice. 24 65 86 F1204 (internal article number)

for production of forgings by forging of ferrous, non-ferrous metals and alloys in the hammer dies model M212 Impact energy, 50 kJ Nominal weight of falling parts, kg 2000 Stroke woman, mm 1200 Stroke woman, mm 1200 Machine dimensions Length Width Height (mm) 3650X1660X5310 Weight kg 58.310, spare parts available

Accumulator for refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor Quantity: 1 piece available -Connection: Ø 38 mm -Dimensions: 132/132/H490 mm -Weight: 3.9 kg

Rotary Actuator, Actuator, 90° Rotary Actuator BERNARD ASP 25 ( ASP25 ) 150 Nm 0,0,0,0 25 rpm 0.03 KW 400 V Hollow shaft: Ø 20 mm Flange diameter: Ø 125 mm New ! Dimensions: 470 x 340 x 320 mm

Rotary Actuator AUMA SAR 10.1-G0 Speed: 22 rpm Closing torque ( min / max ): 60-120 Nm Opening torque ( min / max): 60-120 Nm Hollow shaft: hexagonal profile, wrench size 32 mm Motor: VD 71-2/35 0,0,0,020 Nm/35br /0,020 37 kW 2800 rpm 380 V 3AC 50 Hz IP 67 New ! Dimensions: 550 x 280 x 310 mm

pneumatic linear actuator FESTO DGC-12-370-KF-YSRW-A 530907S708 Characteristic length: 370 mm New ! Dimensions: 520 x 40 x 30 mm

Robot Accessories, Mechanical Stop Axis 3 ABB 3HAC13128-1 COMPLETE MEKSTOPPSET New ! Dimensions(Package): 290 x 250 x 120 mm

Actuator, toroidal transformer SCHNEIDER / PREUSSLER 64-22032-00 95 ( 64-22032-0095 ) 3,2 A Prim. 220 V sec. 0 - 220 V 50 - 400 Hz Regeltransformo für LU32 ! Dimensions: 120 x 120 x 110 mm

Actuator module KIEBACK & PETER KDS Nominal voltage: 24 V AC Rated power: 2 VA ambient temp.: 0...50°C New ! Dimensions: 170 x 145 x 55 mm

Rotary actuator for air dampers, air damper rotary actuator -Manufacturer: Siemens -Type: GDB331.1E -Number: 24x rotary drives available -Price: per piece -Dimensions: 140/70/H60 mm -Weight: 0.8 kg

Limit switches, buttons, safety switches, position switches -Activation radius: adjustable -Minimum operating radius: 95 mm -Number: 12x available -Price: per piece

Limit switches, buttons, safety switches, position switches -Activation radius: adjustable -Minimum operating radius: 45 mm -Number: 30 pieces -Price: complete

Limit switches, buttons, safety switches, position switches -Activation radius: adjustable -Minimum operating radius: 35 mm -Number: 7 pieces -Price: complete

Liquid filter ORSTA, FILTERBAU DESSAU ACC 20 x 25 TGL 21541 ND 25 bar New ! Dimensions: 210 x 145 x 120 mm

Spring accumulator HERION 1451223000000000 New ! Dimensions 200 x 65 x 60 mm