ac motor used for sale

Sensor-actuator distributor, distributor strip -Connection: 15 - 30 V DC -Distributor: 8-way -M12: x 1 screw connections -Weight: 90 g

Sensor-actuator distributor, distributor strip -Connection: 15 - 30 V DC -Distributor: 6-way -Weight: 90 g

Nominal force, kN 2500 Slider stroke, mm 400 Number stroke per minute 25 adjustment mm 260 Distance between table and slider, mm 750 Main motor power kW 47 Table size width / length mm 1250/2500 Dimensions of the machine Length Width Height (mm) 4555_2900_5855 Weight kg 50100

Modular Roll Mat Chain - new 1525 x 340

Conveyor belt / accumulation conveyor / belt conveyor Working height approx. 850 mm, can be adjusted. Length 1000 mm Width approx. 500 mm Equipped with photocell to stop product when downstream machine occupied (contact for pre and redesigned machine available). Equipped with its own drive and controls. Transport speed is infinitely adjustable via potentiometer.

Auxiliary switch for actuator, air damper -Manufacturer: Belimo -Type: S2A -unused from: warehouse liquidation -Dimensions: 185/120/H50 mm -Weight: 300 g

Access ramp set -Driveway width: 170 mm -Height: 230 mm -Dimensions: 810/290/H270 mm -Weight: 10 kg

number: 10 Positionen weight: 30 kg condition: neu : 28 mm P-Set 1:27 pieces, 28mm system (15mm), consisting of: Clamps: 5 Sk. 100 / 350mm Stop: 2 pieces 500mm Stop: 2 pieces 150mm Angle: 2 pieces 175 x 175mm Flat angles: 2 pieces. 350 x 250mm Flat angles: 2 pieces 275 x 150mm Eccentric discs 2 pcs. 100mm Quick release bolts: 10 pcs. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sensor-actuator distributor, distributor strip -Type: SAI-8-MMS 4P M12 -8-way: distributor -Weight: 800 g

Linear drive, linear gearbox, lifting gearbox, spindle drive -Manufacturer: Norgren -Type: M/46025B/M/320 -Stroke: 320 mm -Piston: 25 mm -Dimensions: 520/70/H60 mm -Weight: 1.6 kg

Precise 0,6kw ESC 3043 +Control Unit 50k 1min. pneum. Tool change D.4mm Total weight 15kg. Only the spindle without cable weighs approx. 3.5kg Pneumatic collet/tool change. Diameter 4.00mm Max. speed 50,000, minimum 10,000 is specified. According to the controls, however, it somehow goes up to 6000 down. Water cooling is necessary during operation, this is all described in the original operating instructions. Water cooling is not included. The requirements are described. There is at least talk of liquid cooling on the technical drawing. Very good used condition, full function. You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice. 24 63 87 F1448 (internal article number)

suitable for Peddinghaus profile steel shears Effective length 2,000 mm

COOLANT UNIT for DMU 160P. General Aspects COOLANT TANK CAPACITY (L): 1.300 FILTER CAPACITY (L/MIN): 600 MOTOR: MOTOVARIO SW040 T 100 POWER (KW): 0,12

KNOLL Chip Conveyor + Coolant Tank for DMU 200 TYPE: 375 S-2/100 TOTAL LENGTH (mm): 4350 TOTAL WIDTH (mm): 1180 BELT DIMENSIONS (mm): 1840 x 375

Pressure reducers, pressure regulators, bladder accumulators, high pressure bladder accumulators, hydraulic accumulators -Pressure accumulator: with shut-off valve -Type: SA1 OM25 T100 -Dimensions: 740/113/H200 mm -Weight: 15 kg

Centricator CO-S Haff Schneider OVP New Centering Device Circle Zero Point Meter Total weight 770 grams More dimensions can be found in the pictures New and unused in original packaging. These are only open for viewing. Packaging with slight traces of storage You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice. 24 65 86 F1204 (internal article number)

for production of forgings by forging of ferrous, non-ferrous metals and alloys in the hammer dies model M212 Impact energy, 50 kJ Nominal weight of falling parts, kg 2000 Stroke woman, mm 1200 Stroke woman, mm 1200 Machine dimensions Length Width Height (mm) 3650X1660X5310 Weight kg 58.310, spare parts available

Accumulator for refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor Quantity: 1 piece available -Connection: Ø 38 mm -Dimensions: 132/132/H490 mm -Weight: 3.9 kg

Rotary Actuator, Actuator, 90° Rotary Actuator BERNARD ASP 25 ( ASP25 ) 150 Nm 0,0,0,0 25 rpm 0.03 KW 400 V Hollow shaft: Ø 20 mm Flange diameter: Ø 125 mm New ! Dimensions: 470 x 340 x 320 mm

Rotary Actuator AUMA SAR 10.1-G0 Speed: 22 rpm Closing torque ( min / max ): 60-120 Nm Opening torque ( min / max): 60-120 Nm Hollow shaft: hexagonal profile, wrench size 32 mm Motor: VD 71-2/35 0,0,0,020 Nm/35br /0,020 37 kW 2800 rpm 380 V 3AC 50 Hz IP 67 New ! Dimensions: 550 x 280 x 310 mm

pneumatic linear actuator FESTO DGC-12-370-KF-YSRW-A 530907S708 Characteristic length: 370 mm New ! Dimensions: 520 x 40 x 30 mm

Robot Accessories, Mechanical Stop Axis 3 ABB 3HAC13128-1 COMPLETE MEKSTOPPSET New ! Dimensions(Package): 290 x 250 x 120 mm

Actuator, toroidal transformer SCHNEIDER / PREUSSLER 64-22032-00 95 ( 64-22032-0095 ) 3,2 A Prim. 220 V sec. 0 - 220 V 50 - 400 Hz Regeltransformo für LU32 ! Dimensions: 120 x 120 x 110 mm

Actuator module KIEBACK & PETER KDS Nominal voltage: 24 V AC Rated power: 2 VA ambient temp.: 0...50°C New ! Dimensions: 170 x 145 x 55 mm

Rotary actuator for air dampers, air damper rotary actuator -Manufacturer: Siemens -Type: GDB331.1E -Number: 24x rotary drives available -Price: per piece -Dimensions: 140/70/H60 mm -Weight: 0.8 kg

Liquid filter ORSTA, FILTERBAU DESSAU ACC 20 x 25 TGL 21541 ND 25 bar New ! Dimensions: 210 x 145 x 120 mm

Limit switches, buttons, safety switches, position switches -Activation radius: adjustable -Minimum operating radius: 95 mm -Number: 12x available -Price: per piece

Limit switches, buttons, safety switches, position switches -Activation radius: adjustable -Minimum operating radius: 45 mm -Number: 30 pieces -Price: complete

Limit switches, buttons, safety switches, position switches -Activation radius: adjustable -Minimum operating radius: 35 mm -Number: 7 pieces -Price: complete

Servo Motor Actuator HARMONIC RH-20-80-CC-SP Hi-T Drive Servo Actuator Geared Motor DUNKERMOTOREN GR 63 x 55 119 rpm 24 V used, tested ! Dimensions: 355 x 95 x 95 mm

Servo Actuator HARMONIC RH-20-80-CC-SP Hi-T Drive Servo Actuator Gear Motor DUNKERMOTOREN GR 63 x 55 165 rpm 24 V used, tested ! Dimensions: 355 x 95 x 95 mm

Spring accumulator HERION 1451223000000000 New ! Dimensions 200 x 65 x 60 mm

Piston accumulator BOLENZ & SCHÄFER AK 10-220-18/0/0/1 ( AK10-220-18/0/0/1 ) Content: 10 l Pmax: 220 bar used, tested ! Dimensions 700 x 210 x 210 mm

Accessory kit for final dimensions PAGUS Dimensions: 145 x 125 x 50 mm

Accessory kit for gauges CCCP 0 - 320 mm in wooden box Dimensions: 500 x 190 x 55 mm

pneumatic clamping actuator NAREX JU 30 driver: 28 x 28 mm used, tested ! Dimensions: 200 x 140 x 170 mm

Oil Pump, Lubrication Pump ORSTA AC13-1050 TGL 17 - 49402 p: 6.3 bar V: 6.3 m3/h Motor : 5.5 kW 380 / 660 V IP 54 New ! Dimensions: 1510 x 600 x 530 mm

Actuator, Valve Actuator Electric HONEYWELL MODUTROL IV MOTOR M7284C 1000 Series 72 120 V 29 VA New ! Dimensions: 270 x 210 x 160 mm

Ball valve with pneumatic valve actuator FESTO CRQH-DR-1/2 B 154076 control pressure max 10 bar PN 63 DN 15 Dimensions: 150 x 140 x 90 mm

Shut-off valve with pneumatic valve actuator GSR VENTILTECHNIK D2205/0404/7005 C706917 control pressure max 5 bar PN 16 DN 40 New ! Dimensions: 300 x 200 x 150 mm

Ball valve with pneumatic valve actuator AUTOMAX SUPERNOVA SID050 D PN 63 DN 25 Dimensions: 170 x 165 x 75 mm

Ball valve with pneumatic valve actuator AUTOMAX SUPERNOVA SID063 S10 PN 63 DN 50 Dimensions: 220 x 190 x 110 mm

Ball valve with pneumatic valve actuator AUTOMAX DA 60 control pressure max 8 bar PN 35 DN 50 Dimensions: 230 x 165 x 100 mm

Ball valve with valve actuator pneumatic BAR PKO-1/0-I-025-D055 32105306 DN25 PN40 New ! Dimensions: 130 x 180 x 60 mm

pneumatic actuator, pneumatic actuator, pneumatic actuator SAMSON Type 2780 2780-1110131.00 stroke: 12 mm p: max 4 bar New ! Dimensions: 170 x 170 x 120 mm

electr. Rotary Actuator J + J / STEINEBRONN J2 EP4-230AC L+H 20/55/140/300 80 to 240 V Dimensions: 110 x 70 x 45 mm

Actuator, DC motor VEM, ELEKTRODYN DRESDEN GSM35.2 TGL 20675 1500 rpm 0.16 kW 60 V DC 4.5 A IP21 shaft: Ø 11 mm flange: 120 x 120 mm used, tested ! Dimensions: 270 x 120 x 120 mm

Dematic conveyor accumulating roller conveyors 2625-500-440 RA1995 Accumulating roller conveyor Nominal/outer width (NB): 500 mm Available conveyor lengths (FL): 2625 mm, expandable with further pieces Further information Manufacturer: Siemens Dematic Type: Accumulation roller conveyor Accumulation size: 750 mm Year of manufacture: unknown Condition: good (used) roller width (RB): 440 mm roller pitch: 125 mm variable drive type: SEW gear motor weight of conveyed material: up to 30 kg Accumulating mechanics: Light barriers with pneumatic valve and cylinder The following accessories are optionally available e.g.: Frequency converter supports side guides Price: on request plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-400 condition: very good (used) Conveying length in mm: 2625 Nominal / outside width in mm: 500 Roll width in mm: 440 Ro ...

Dematic conveyor system roller conveyors 16000-600-540 RA2340 The roller conveyor shown does not correspond exactly to the illustration in the advertisement, but is the same model and is in the same condition. Only the dimensions differ. Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of manufacture: unknown Available conveyor lengths (FL): 16000 mm Stowage space size: 750 mm Nominal/outer width (NB): 600 mm Condition: good (used) Roller width (RB): 540 mm Roller pitch: 125 mm variable Drive types: SEW geared motor Weight of conveyed goods: up to 30 kg Stowage mechanism: Light barriers with pneumatic valve and cylinder The following accessories are optionally available e.g: additional elements to expandable frequency converter supports lateral guides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric  ...

Dematic conveyor system Accumulating roller 22000-500-440 RA2342 The roller conveyor shown does not correspond exactly to the illustration in the advertisement, but is the same model and is in the same condition. Only the dimensions differ. Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of construction: unknown Conveyor length (FL): 22000 mm Condition: good (used) Roller width (RB): 440 mm Nominal/outer width (NB): 500 mm Accumulation slot size: 700 mm Storage slot control: Plug and Play, electro-pneumatic Roller pitch: 125 mm Drive types: SEW Eurodrive head drive Conveying speed: approx. 0.5 m/s Optionally available e.g: Frequency inverter for stepless speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) scope of delivery: without supports and side guid ...