abs pump used for sale

Materials: Housing: 1.4581 Wheels: 1.4408 wave: 1.4571 Sealing: single-acting mechanical seal, carbon/silicon carbide/Viton Model A6: Pump on base plate mounted elastic coupled with 1.35 kW IEC standard motor, three-phase Pressure: 2 bar Revolutions: approx. 1,450 U/min Output: 1,200 l / h Mains frequency: 50 Hz Engine power: 230/400 V Protection class: IP 55 protection class: E ex eII T3 Design: B3 Pump partially unused in excellent condition!

Attachment: eccentric screw pump used Manufacturer: Allweiler Series: AED 1E 4250 Year of construction: 2000 Working temp.: approx. 20 ° C Viscosity at tA: approx. 500 mpa.s Density at tA: approx. 1.0 kg / m³ Pressure in the pressure connection: 2-6 bar Speed: 62-310 1/min Flow rate: 30-180 m, m³/h Engine capacity: 45.0 kW

New dosing pump from Prominent

Submersible pump, in steel vessel, Q= 10 m?/hr., H= 36-41 m, 1860-1980 rpm, 15,0-20,0 kW, with Seva electro motor, 30,0 kW

Dosing unit with 6 prominent pumps (used)

VNr. A57408/00 -Centrifugal pump 4 m3/h, 400 V, 5.5 kW

Mobile pumping station w / air driven pump and 2 "camlock couplings and flushing. Build in PE plastic.

New pump from Ebara: Ebara, pump 3SHS 50-160/5,5Kw The EBARA centrifugal pumps series 3SHS are high-quality stainless steel pumps with stub shaft and standard motor for commercial and industrial applications.

New Ebara pump for sale: Ebara, pump 3LS 80-160/15

Komplete pump on steel frame. Volute casing pump KBO Vogel LSNI 80-50-160

Vacuum pump (fluorine-resistant) Manufacturer: Pfeifer 219 l / min

Centrifugal pump Manufacturer: W. Schmidt K.G. Bretten. Type: Delta A 218/1 Usage area: wine pump Engine: Power: 1.5 HP Revolutions: 2840 RPM In very good condition!

Centrifugal pump Manufacturer: Hilge Type: Hygia SII / 60A Usage area: wine pump Engine: Power: 12,5 HP Voltage: 380 V Revolutions: 2.890 U/min In very good condition!

KSB Wilo, Grundfos, Allweiler pumps in stock. Incl. VFD,. from 1KW to 37KW, 1m / h up to 350m / h designation, see list.

Eccentric screw pump Manufacturer: Seepex Series: BN Size: 17 Pressure level: 12 Operating pressure: 10 bar Operating temperature: - 10 / + 30 Flow rate: 10 m ³/h Revolutions: 260 U/min Year of constr.: 1990 in very good condition!

Eccentric screw pump Manufacturer: Pumpenfabrik Wangen GmbH Type: 50 ST - V2A Serial number: 53-651 Material: V2A Flow rate: 10 m ³/h Operating pressure: 4 bar Revolutions: 470 RPM In very good condition!

HT Water pump,Type WD-90L240 Kolmeks WD90L240 Part number: 191001

System: eccentric screw pump Manufacturer: REWA Type: R20-2 Year: 2014 Flow rate: 0.8 m ³/h Pressure: 12 bar Speed: 960 rpm Motor: 1.5 kW / adjustable Other: hopper Material: Main body steel Shaft: Stainless steel Stator: Stainless steel Rotor: Stainless steel Shaft seal: Rubber Condition: The pump has no hours of operation and is as good as new

IBEX MOG 2130BA Serial No. 931278 / 01B 400V, 5.5A integrated fan motor Connections: DN 80 Double mechanical seal, sealingwater connections

REWA R35-2 Product no.: RE-HU-2015-0901-PEC2 System: eccentric screw pump Manufacturer: REWA Type: R35-2 Year: 2014 Flow rate: 8 m ³/h Pressure: 12 bar Speed: 960 rpm Motor: 4 kW / adjustable Other: hopper Material: Main body steel Shaft: Stainless steel Stator: Stainless steel Rotor: Stainless steel Shaft seal: Rubber

Submersible pump Manufacturer: Netzsch Type: 4NT04 Length: approx. 1,80 m Characteristics of the immersion pump -insensitive to Sandy shares in the pumped liquid -pulsation promotion -very high suction capacity The immersion pump offers you: -low life cycle costs -high pressure stability -exact dosing accuracy Advantages of the immersion pump -Operation possible at high water content in oil -Reliability for oils with high viscosity -ready to use media with high fixed material freight Submersible pump is still unused, so as new and in very good condition!

Used pump for milk, made by HPM, model H 55 P. New 2002.

Becker vacuum pump type: 80 L / 4 X Engine No. A202-300 Serial No. 1491627 Suction capacity: 10/12 CC/h Suction pressure: 3/3 mbar

High pressure - piston pump Flow water pump Manufacturer: UDOR Type: GAMMA 162 TS 1C. Detailed information on the manufacturers page, see pictures. Condition: Used, fully functional Scope of delivery: see the pictures.

Used vacuum pump made by TEPRO Koszalin with a central vacuum. Unit that has two points of connection, the machine very little exploited.

dosing pump BRAN LUEBBE for premix performance 40,000 lt/h

Hydraulic pump with 2 valves; 7.5 kW hydraulicpump incl. 2 valve; 7.5 kW

Fuel pump, Vasa 32 Part no. 165180, PEO-G030E LOrange Part no: 165180

Prelubricating oil pump, Wärtsilä 8L20 ABB 3 phase motor M3AA 100 LB-2 NEW Part no: 182018

Internal gear pump Manufacturer Truninger Type QT52-050/42-025/R BIZ HPN 705984 Series 257848 Used

Internal gear pump Manufacturer of Bucher Hydraulics Type QT52-050/51-100 L 252-5 HPN 692337 PD 180/100 bar VG 050/100 cm³/rotation Nr 37381094 Used

NEW injection pump 0402066725(= PES6P110A120RS3336-1) Contact= MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven/Germany phone: 0049(0)4281-950583 fax : 0049(0)4281-950585 info@miw-zeven.de abc.miw-zeven

Screw trough approx. 2,800 x 660 mm, screw diameter: 370 mm, 2-cylinder solids pump SP2180-400, capacity 8 cbm/h, with a distribution station and hydraulic unit with 55 kW

Recon Part number: 1216-3235 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

NEW Part number: 0212 5446 Please note: We have various other RECON parts from different manufacturers and types available. We like to send you our current store reserves.

Water pump MWM 620 RECON Part number: 1230 7597 / 1230 2820 / 1230 3401 / 1507 7822 Type 166R 6.440.0.730.011.7 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

RECON Part number: 1230 2236 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

MWM TBG 604-BV16 MWM TBD 604-BV16 RECON Lubricating oil pump Part number: 1213 5590 / 1213 4160 / 4163 1213 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

RECON Part number: 1230 2768 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

RECON Part number: 1216 1680 = 6.232.0.730.013.6 12 cylinders Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Part number: PE8P 120A 620/4 LS 325 / O 401 878 091 Controller RSUV250-800 P10A318A Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

RECON Part number: 0215 7148 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

RECON Part number: 0215 7150 0215 4236 cast Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

RECON Part number: 0400 5681 new housing with hose connection Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

RECON Part number: 1231-3106 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

New (secondhand) Compact, reliable, horizontal, multistage, end-suction centrifugal pump with axial suction port and radial discharge port. Pump materials in contact with the liquid are in high-grade stainless steel. The mechanical shaft seal is a special designed, unbalanced O-ring seal. CM 5-4 (photo 1 and 2) Rated flow: 4.7 m³/h Rated head: 30.7 m CM 3-4 (photo 3 and 4) Rated flow: 3.1 m³/h Rated head: 27.4 m

New (second hand) pumps Centrifugal pump Ebara 2CDX_120-40 (photo 1): -400v -3 phase -3 kw -2900 rpm -Suction 1 1/4" PUMP TECHNICAL DATA • Maximum working pressure: 8 bar • Maximum temperature of the liquid: -5°C ÷ +60°C for standard and E version -5°C ÷ +110° for H-HS-HW-HSW version • G1½ suction connection for 2CDX 200, G1¼; for the rest of the range • G1 discharge connection 3SHS 50-125/3.0 centrifugal pumps close coupled (photo 2)

Beer pump / water uwemetzler@dingslebener

New (secondhand) pumps Delivery: up to 31 m3/h. Head: up to 62 m. Power supply: three-phase 50 and 60 Hz. Power: 0.37 kW to 3 kW. Maximum operating pressure: 8 bar. Temperature of pumped liquid: -10°C to +85°C (CEA-CA) / -10°C to +110°C (CEA-V CA-V with elastomers in FPM). Insulation class: F. Protection: IP55. Pump body: Stainless steel. Impeller: Stainless steel. Diffuser: Stainless steel. Seal housing: Stainless steel. Adapter: Aluminium. Mechanical seal: Ceramic/Carbon/NBR. Fill and drain plugs: Stainless steel.

New (second hand) pump Grundfos CR 5-15 Vertical, multistage centrifugal pump with suction and discharge ports on same the level (in-line) enabling installation in a horizontal one-pipe system. The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling and easy service and access. Power transmission is via a split coupling. Pipework connection is via oval flanges with internal Rp threads. The pump is fitted with a 3-phase, fan-cooled asynchronous motor.