abs extruder used for sale

A Lenhard extruder for butyl rubber is available. Application: insulating glass production, material: thermoplastic butyl based on polyisobutylene, max. operating temperature: 140°C, max. butyl pressure: 140bar, max. hydraulic pressure: 150bar. An on-site inspection is possible.

Haendle Extruder type PZG60b/50 with doubleshaft mixer MDVG920a, 29 cbm/h, 30 bar

COMAC TWIN SCREW EXTRUDER EBC60, barrel with n. 2 x 60 mm. diam co-rotating screws, 42 L/D, for PE PP ABS PC PS, compounds, masterbatches, Average throughput rate 600 kg/h depending on material and feeding rate, spare : 2 screws and 1 barrel reconditioned to 100% performances, Mounted: screws + barrel in very good conditions, n.1 dosing unit with hopper, N.2 vacuum degassing points, d.c.132 kw Siemens main drive 400V 50 Hz, non-stop hydraulic screen-changer with 90 mm screens (available with fully automatic screenchanger, on separate request), hydraulic pack, fitted with strand die (available with water ring pelletizer on request) + stainless steel cooling bath with heat exchanging unit + air-blowing dryer, electric cabinet (for extruder, screen-changer, hydraulic pack), pelletizer for strands, TVV Cooling column for granule., constructed i n 2001, The line is offered totally or partiall ...

General SKU243Y170 MakeBühler Serial3068043442 TypeBTSK 30/40D Sizes Screw diameter30 mm Main Features Motor21.2 KW Inlet diameter50 mm L/D53 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter30 mm L/D53 Co-rotatingcheck Number of heating zones:11 Water coolingcheck AC-motor21 kW 360 V Screw speed25—800 rpm Feeding with hoppercheck With jacketcheck General Year of construction1998 LocationBarneveld With switchgearcheck Sizes switchgear2,40 x 0,50 x 2,00 m Floorspace2,38 x 0,60 m Total height1,45 m Weight700 kgDouble screw extrudersBühlerExtruders > Double screw extrudersBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please vis ...

KAUTEX KCC30 Extrusion Blow Molding Machine Year: 2012 Operating hours: 33,000 h 1 station Clamping force: 300 KN Screw diameter: 90 mm 4 kg accumulation head (HDPE)Platen Dimensions : 530 x 700 mm Distance between plates 1000 mm Maximum mold dimensions: 870 x 650 x 765 mm Control system Blow command Head type: Vertical head with hydraulic accumulator Maximum container volume: 30 liters Die diameters: 90, 150, 170, 190 or 220 mm Maximum pressure: 220 bar Air consumption: 95 m3/h Pressure air: 6 - 10 bars Installed power: 20 KW Number of temperature zones: 5

Rod line consisting of: Feeding system with agitated hopper Werner & Pfleiderer extruder ZSK model Ø53x33D twin-screw Manual filter changer, CFM75 model 10-strand + 6-strand rod granulation head TI400/4 4 M immersion tank Periplast dryer Granulator Screening

Clextral extruder, Type: Evolum EV032 M, Extruder: 40D, Barrel length: 10 x 128 mm, Stroke length: 1420 mm, Water: 4.5 - 5.5 Bar, Compressed air: 6 Bar, Steam injection: 2 - 6 Bar, Power: 3 x 400V, 50Hz, 83kW, Dimensions: 4475 x 1200 x 2100 mm, Weight: 1905 kg, Only 80 working hours!, Clextral water pump, Type: CLX DKM, Flow: 6 - 42 l/h, Pressure: max 10 Bar, Reservoir: 7.5 litre, Power: 0.55 kW, Dimensions: 1265 x 350 x 700 mm, Clextral / Prominent oil pump, Type: GMXA1604, Flow: 0.3 - 2.5 l/h, Pressure: max 10 Bar, Reservoir: 10 litre, Dimensions: 900 x 700 x 1150 mm, Clextral High Moisture Extrusion Cooking die, HMEC type: 2 x 800 mm length, Material: CLX202, Internal section: 60 x 8 mm, Dimensions: 1900 x 700 x 1200 mm, TLV steam kit, Type: 2/10 TLV, Serial number: SV148, Steam flow: 2 - 10 kg/h, Steam pressure: 6 - 10 Bar, Maximum pressure: 10 Bar, Steam inlet: DN15, PN16, Steam out ...

PowerHeater PH100-1, Capacity: 150 - 240 kg/h, Steam: 50 - 100 kg/h, 10 Bar, Compressed air: 6 - 8 Bar, 50 Nl/min, Water: 16 Bar, 1500 l/h, Power: 3 x 400V, 50Hz, 1.5kW, Dimensions: 3000 x 1400 x 1800 xmm, Weight: 850 kg, Klovborg slab-outlet conveyor, Serial number: 220188-2, Power: 230VAC, 50Hz, 1Ph, Dimensions: 1250 x 500 x 1450 mm, Weight: 65 kg, Source Technology screw trolley (2 pc.), Serial number: 65800-41-110562 / 66400-33-110562, Working load: 250 kg, Dimensions: 1500 x 1400 x 1950 mm, Weight: 100 kg, With Kito CX003 manual hoist

A complete Battenfeld compact extrusion line for the production of PVC profiles is available. 1) Twin-screw extruder Battenfeld MBEX 2-50-16 V, year of manufacture: 2006, output capacity: 15kg-60kg/h, screw diameter: 52mm, screw length: 16×D, barrel zones: 4, barrel cooling zones: 3, adapter zones: 1, die heating zones: 9, control system: BMCtouch. Including dry vacuum pump, pressure measuring points, clamping flange, water-air separator, blow-off device, mounting elements and hopper cover. 2) Calibration table Battenfeld KP 125 V 2/4m, mounting frame length: 4100mm, mounting rail width: 320mm, longitudinal adjustment: 500mm, transverse adjustment: +/-15mm. 3) Speck vacuum system, pumps: 2, motor power: 2×4kW, operating pressure: 200mbar, max. air capacity: 2×140m³/h. 4) Battenfeld RP 125 SE caterpillar haul-off, passage height: 100mm, contact length: 1100mm, pad width: 160mm, haul-o ...

Screw diameter: 114mm, max. PVC throughput: 600 kg/h, max. screw speed: 20/min, number of heating zones for molds: 12, motor power: 76 kW, rated voltage: 3x 415V AC, rated current: 353A, rated power: 218kW, weight: 7.1t, operating hours: approx. 90,000h. Screws: Geometry designed for PVC profiles, water-cooled, cylinders: nitrided, air-cooled, equipped with a new PLC control system, vacuum pump, and power inverter for the main motor. An on-site inspection is possible.

Single screw extruder manufactured in 1986. This PREALPINA Prealpina 105 × 30D features a screw diameter of 105 mm and an output capacity of up to 300 kg/h. It is designed for processing various post-consumer plastics, including PE and PP. The machine includes essential components such as a gravimetric dosing. If you are looking to get high-quality plastic recycling capabilities, consider the PREALPINA Prealpina 105 machine we have for sale. Contact us for further details.

This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Ideal for pipe extrusion, this machine represents a robust addition to any production line. Contact us for more information.

TECOM BLOWN FILM EXTRUDER, for LDPE-RLDPE blends, Contrex feeding, 2 gravimetric components + 1 volumetric dosing units, Screw diam.70 mm 30 L/D, Rotating head, Low neck, 1.600 mm pull off unit, gusseting unit, Cason corona treatment, single color printer (for marks), 1.600 mm double collection frame, BRA 36+ Eurochiller, working width: 1600, availability: February 2026

Technical details Type: Stainless steel boilie extruder / paste extruder Application: - Fishing boilie production - Animal feed paste processing - Feed and mixture extrusion Tub capacity: 50 L Power supply: 220 V Screw speed: Variable, 0–80 rpm Configuration: - Integrated paste mixer - Mixing paddles for paste/hull processing - Variable speed screw drive - Start/stop controls - Emergency stop button - Reverse function Construction: Full stainless steel construction Features: - Easy to clean - Easy maintenance access Condition: Functional, ready to work Auction-ID: A7-48425-8