128,060 used machines on RESALE, but how to find them? Machine Search
Dear Ladies and Gentlemen, We have the following Oil Transformers in stock Description: Type : Oil Transformer Finish : Hermetic Make :P AUWELS Year of construction : 2001 Condition : Used Inspected Rated power : 2000 KVA Medium voltage : 20 KV + 4 x 2.5 % Low voltage : 400 V Groupset : Dyn 5 Frequency : 50 Hz Dimension Length 205 cm Width 114 cm Height 205 cm Weight 5290 KG Other powers and voltages also available from 100 KVA to 5000 kva. All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery . Available for further questions Mon to Sat 8 a.m. to 10 p.m.
grinding length: - mm grinding width: - mm workpiece height: - mm workpiece diameter: - mm material thickness: - mm centre distance: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m No. 4104 Throughfeed grinding / deburring machine LINEAR ABRASIVE Isolde The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
quantity: 2 STK Winter System Reishauer - Diamant Abrichtscheibe Modul 1,25 - DP 20,3 - EW 30° - HBR=150 - ID-Nr. 69601_01 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.com ...
Clamping plate, welding table, welding table, straightening plate -Width: 1760 mm -Length: 2400 mm -Height: 840 mm -partly with threaded holes -Plate thickness: 50 mm -with supporting ribs -Transport dimensions: 1760/2400/H840 mm -Weight: 2000 kg
Clamping plate, welding table, welding table, straightening plate -Width: 1755 mm -Length: 2410 mm -Height: 845 mm -partly with threaded holes -Plate thickness: 35 mm -with supporting ribs -with vice -Transport dimensions: 1800/2560/H1000 mm -Weight: 2000 kg
ABA Grinding Machine Starline CNC Profile Grinding Machine Surface Grinding Machine Hersteller [manufacturer]: ABA ELB Type [ type]: Starline Control unit: Siemens Sinumerik Incl. handwheel Baujahr[construction year]: 10/2004 Weight [weight]: 6000kg Approx. (W x D x H): 4.1m x 5.1m x 2.5m Full documentation is available. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Phone +49 17621834834
Clamping plate, welding table, welding table, straightening plate -Width: 995 mm -Length: 1000 mm -Height: 800 mm -with supporting ribs -Weight: 170 kg
Clamping plate, welding table, welding table, straightening plate -Width: 1210 mm -Length: 4000 mm -Height: 830 mm -Sheet thickness: 30 mm -with steel frame -Number: 2x plates available -Price: per piece -Weight: 1400 kg/piece
approx. 17 kw/23 hp 2-cylinder diesel engine, water-cooled, complete engine with starter, alternator and gear hydraulic pump. Also available: Isuzu 3 AB 1 – B 02, 3 cyl., 25 kw/34 hp as well as various parts ex Isuzu 3 KC1 Diesel engines 1-6 cyl., various makes: Deutz, Daedong, Farymann, Hatz, Iseki, Isuzu, Komatsu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Output from 4.5 – 100 kw, used, partly as good as new.
Clamping plate, welding table, welding table, straightening plate -Width: 1510 mm -Length: 3490 mm -Height: 790 mm -Sheet thickness: 25 mm -with supporting ribs -Weight: 2700 kg
Clamping plate, welding table, welding table, straightening plate -Diameter: 1600 mm -Height: 900 mm -Sheet thickness: 30 mm -with steel frame -with vise -Transport dimensions: 2140/1610/H900 mm -Weight: 620 kg
Clamping plate, welding table, welding table, straightening plate, construction table -Width: 1840 mm -Length: 5200 mm -Height: 850 mm -Sheet thickness: 28 mm -with supporting ribs -Weight: 2400 kg
quantity: 2 STK Winter System Reishauer - Diamant Abrichtscheibe Modul 3.25 DP max. 7,8 - EW 20° - HBR=600 - ID-Nr. 69621_1 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.co ...
quantity: 2 STK Winter System Reishauer - Diamant Abrichtscheibe Modul 2-6 - DP 12,4 - EW 20° - HBR=2.500 - ID-Nr. 69629_1 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.com ...
quantity: 2 STK Winter System Reishauer - Diamant Abrichtscheibe Modul 3.25 DP max. 7,8 - EW 20° - HBR=1200 - ID-Nr. 69234_1 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.c ...
Flange bearing -Bore: Ø 20 mm -Mounting hole: Ø 12 mm -Bore distance: 64 mm -Dimensions: 130/130/H50 mm -Number: 16x available -Price: per piece -Weight each: 1.7 kg
Three-phase motor, electric motor -Power: 0.25 kW -Speed: 870 rpm -Shaft: Ø 19 mm -Construction: B3 -Protection class: IP 55 -Dimensions: 270/155/H190 mm -Weight: 8.1 kg
quantity: 2 STK Winter System Reishauer - Diamant Abrichtscheibe Modul 3.25 - DP max. 8 - EW 20° - HBR=1200 - ID-Nr. 69693_1 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.c ...
quantity: 2 STK Winter System Reishauer - Diamant Abrichtscheibe Modul 2,5 - DP 10,2 - EW 20° - HBR=1000 - ID-Nr. 69631_01 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.com ...
quantity: 2 STK Winter System Reishauer - Diamant Abrichtscheibe Modul 3.25 - EW 20° - HBR=300 - ID-Nr. 69604_2 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.com (free vers ...
three-phase motor, electric motor -Power: 2.2 kW -Speed: 930 rpm -Shaft: Ø 28 mm -Design: B3 -Protection class: IP 44 -Brake: 220 Volt -Quantity: 1 piece available -Dimensions: 470/270/H205 mm -Weight: 39 kg
Gear motor, electric motor, electric gear motor -Speed: 57 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: 22 mm -Protection class: IP 54 -Quantity: 1x available -Dimensions: 455/155/H195 mm -Weight: 18.8 kg
Gear motor, electric motor, electric gear motor -Speed: 17 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 35 mm -Protection class: IP 33 -Dimensions: 480/250/H225 mm -Weight: 37 kg
quantity: 2 STK Diamant Abrichtscheibe Modul 1,5 - 3 - EW 15° - HBR=300 - ID-Nr. 69604_1 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.com (free version) The data for thi ...
quantity: 2 STK Winter System Reishauer - Diamant Abrichtscheibe Modul 3.25 - DP max. 8 - EW 20° - HBR=600 - ID-Nr. 69711_1 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.co ...
quantity: 2 STK Winter System Reishauer - Diamant Abrichtscheibe Modul 3.25 - EW 20° - HBR=1200 - ID-Nr. 69004_2 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.com (free ver ...
Electric motor, three-phase motor -Power: 0.75 kW -Speed: 2770 rpm -Shaft diameter: 20 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 315/160/H200 mm -Weight: 8.15 kg
Gear motor, electric motor -Speed: 20/40 rpm -Power: 0.18/0.25 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Length: 253 mm -Protection class: IP 33 -Number: 3x motors available -Price: per piece -Dimensions: 610/200/H175 mm -Weight: 15.4 kg
Gear motor, electric motor -Speed: 56 rpm -Power: 1.5 kW -Construction: B5 -Diameter shaft: Ø 45 mm -Protection class: IP 54 -without breaks -Dimensions: 650/280/H300 mm -Weight: 50 kg
New chain hoist with warranty Year 2013 Stroke 1/4 m/min complete with underlays, landing gear, etc.
arm length: 5500 mm weight max. in kg: 250 kg swivelling range: Grad height: 3800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Lifting height 3800 mm Crane number 1.23 The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Roll-off trolley for plastic belt, light version
Gear motor, electric motor -Speed: 100 rpm -Power: 0.11 kW -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Number: 2x gear motors available -Price: per piece -Dimensions: 335/170/H160 mm -Weight: 9.2 kg
Gear motor, electric motor, three-phase motor -Speed: 31.5/63 rpm -Power: 0.25/0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 44/55 -Price: per piece -Number: 2x available -Dimensions: 405/190/H160 mm -Weight: 17 kg
moving point, moving center point, moving Morse taper, moving -Center point: 60 mm -barrel tip: shaft-mounted -Recording: MK6 -Number: 1x tips available -Price: per piece -Weight: 16 kg
Tool grinding machine, lapping machine Steel Grinding Lapping Machine Manufacturer: ABWOOD Machine LTD Item no. 122641-2 Model CGIA No. 1746 Speed: 2800 1/min. Connection: 380 V with coolant supply Weight 400 kg Support table adjustable at an angle of +-10°
grinding length: 600 mm grinding width: 400 mm workpiece height: mm total power requirement: 11 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
moving point, moving center point, moving Morse taper, moving -Center point: 40 mm -barrel tip: shaft-mounted -Recording: MK5 -Number: 2x tips available -Price: per piece -Weight: 4.7 kg
moving point, moving center point, moving Morse taper, moving -Center point: 50-85 mm -barrel tip: shaft-mounted -Recording: MK5 -Weight: 5.4 kg
Type of saw / pincer Height 1000 mm Width 1200 mm Length 800 mm Power supply: 400V 50Hz 3N Main Material Stainless steel, acid-resistant A set for cutting pork cross bones. The set includes: -Scissors - Hydraulic power unit - Balancer -Sterilizer
Filling, weighing and packaging line: Composed of: "Ishida" multihead weigher Type CCW-M-216W-D/30-SS Heads: 16 pieces Output: up to 2 x 40 weighings/min Filling weight (max. weight): 1,500 g Accuracy: Average 0 to +1.0 g Weighing circumference: 14-1000 g Max. volume: 4,500 cc (per individual weighing) Minimum division: 0.2 g Display: Toch-screen display Power: 230V, 50Hz Connected load: 1.7 kVA In good condition + Vertical Flowpack Machine "Rovema" Type VPK260 - 14110 YOC 2001 Power (mech.) Cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-roll) Bag width (min. – max.) (mm): 60-260 Bag length (min. – max.) (mm): 120-600 Filling volume (max.) (cm³): 6000 Sealing Pressure (Max) (N): 5000 (Optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2,200 x 1,430 x 1,620 mm Weight: 920 kg Mains ...
Key data: 22 t, 900 mm, 850 mm
Small Electric Press Brake C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Back gauge: 2 axis controlled X-R axes Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under power possible at any time by appointment!
Morse taper sleeve, tool holder, morse taper, morse cone, taper sleeve, adapter -Adapter -Intake: MK4 -Recording tool: MK1 -Number: 24x recordings available -Price per piece --Weight: 0.55kg/pcs
Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter -Adapter -Recording: MK4 -Tool holder: MK2 -Number: 27x recordings available -Price: per piece -Minimum order: 3 pieces -Total length: mm -Weight: 0.5 kg/piece
Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter -Adapter -Recording: MK4 -Tool holder: MK3 -Number: 102x recordings available -Price: per piece -Minimum purchase: 3 pieces -Weight: 0.4 kg/piece
Key data: 22 t, 900 mm, 850 mm
Small Electric Press Brake C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Back gauge: 2 axis controlled X-R axes Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under power possible at any time by appointment!
Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter -Adapter -Recording: MK5 -Tool holder: MK2 -Number: 51x recordings available -Price: per piece -Total length: mm -Weight: 1.5 kg/piece
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter -Adapter -Recording: MK5 -Holder tool: MK3 -Number: 38x recordings available -Price: per piece -Total length: mm -Weight: 1.1 kg/piece
Morse taper sleeve, tool holder, morse taper, morse cone, taper sleeve, adapter -Adapter -Intake: MK6 -Recording tool: MK3 -Number: 3x recordings available -Price per piece -Weight: 4kg/pcs
maximum number of results exceeded
please refine your search
