a1 steel sheds used for sale

300 litre, Stock number: T1679, Litre: 300, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: With hinged lid, Agitator: Yes, from the top, Agitator type: Frame agitator with 2 integrated planet agitators, Motor: 0,37 kW - 380 Volt - 57,13 o/min, Inner diameter: Ø 635 mm, Total height: H 1920 mm

Stock number: F995, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 3 pcs., Item: Vibrator weigher, Construction: For weighing of powder, granulate etc., Dosage: 0-200 g., Manufacturer: Zeuya, Type: MG 200

610 litre, Stock number: T1657, Litre: 610, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On legs, Top: Dished, Bottom: Dished, Double jacket: Yes, Tank cover: In the top and side, Agitator: Yes, Motor: Yes, Inner diameter: Ø 775 mm, Manufacturer: INDUSTRI-KEDLER, Year: 1973

Stock number: F996, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Construction: Air driven with foot switch, Filling head: 1 pc., Piston dosage: 13-130 ml., Manufacturer: Würschum, Type: H 130

1.000 litre, Stock number: T1656, Litre: 1.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Dished, Bottom: Dished, Double jacket: Yes, Tank cover: In the side, Agitator: Yes, Agitator type: 2-bladed propeller, Motor: 45 rpm., Inner diameter: Ø 900 mm, Outer diameter: D 950 mm, Total height: H 2850 mm, Manufacturer: A. Wilson

800 litre, Stock number: T1655, Litre: 800, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Dished, Bottom: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 400 mm, Agitator: Prepared for agitator in the top, CIP: Yes, Working pressure: 3 Ato, Inner diameter: Ø 950 mm, Outer diameter: D 1100 mm, Total height: H 1750 mm, Year: 1980

1.200 litre, Stock number: T1635, Litre: 1.200, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Plain, Bottom: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: Hinged lid in the top, Agitator: Yes , Agitator type: Dissolver, Agitator placement: From the top, Motor: 7,5 kW - 710 rpm., Inner diameter: Ø 1150 mm, Outer diameter: D 1300 mm, Total height: H 3380 mm

1.200 litre, Stock number: T1636, Litre: 1.200, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Plain, Bottom: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: Hinged lid in the top, Agitator: Yes, Agitator type: Dissolver, Agitator placement: From the top, Motor: 7,5 kW - 710 o/min., Inner diameter: Ø 1150 mm, Outer diameter: D 1300 mm, Total height: H 3380 mm

280 litre, Stock number: T1611, Litre: 280, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. of legs, Top: Dished, Bottom: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Riveted aluminum cladding, Inner diameter: Ø 600 mm, Outer diameter: D 760 mm, Total height: H 1410 mm, Manufacturer: FURHOFFS Rustfria, Year: 1985, Other: Inspection cover in the top and flange for agitator in the top

330 litre, Stock number: T1619, Litre: 330, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. of legs, Top: Open, Insulated: Yes, Outer cladding: Fully welded stainless, Inner diameter: Ø 900 mm, Outer diameter: D 1000 mm, Total height: H 980 mm

5.000 litre, Stock number: T1570, Litre: 5.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On legs, Top: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Agitator: Yes, Agitator type: Planet agitator, Agitator placement: From the top, CIP: Yes, Inner diameter: Ø 2200 mm, Outer diameter: D 2340 mm, Total height: H 2290 mm

Stainless steel vacuum vessel with EKATO FLUID Mixer TYPE FGL-25D (mixer new 2005) vessel 1370 Ltr, vacuum -1/0,5bar, maximum allowed Work Temp 110C

1.750 litre, Stock number: T1573, Litre: 1.750, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On leg frame with truck grip, Top: Open with hinged lid, Double jacket: Yes, Agitator: Yes, Agitator type: Horizontal frame agitator, Dimensions: L 1450 x W 1050 x H 1600 mm

75HL Vessel - Atmospheric Fermenting vessels Vertical Cylindrical with conical base Approx dimensions: Overall height 4850mm Overall diameter 2200mm Legs 1830mm Top Dish 450mm Working capacity 75HL Max Brim full capacity 100HL estimated Fittings inlet/outlet 2” RJT Vessels fitted with internal rotating sprayballs ,sample taps, ,racking point with racking arm and a central top manway entrance There are cooling jackets on the Cone and the side wall (single zone) Vessels are insulated and clad in riveted stainless steel The vessels have previously operated at up to 3 Bar. However there are no specification plates on the vessels and the design drawings are not available Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

15.000 litre, Stock number: T1579, Litre: 15.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Cheese vat, Standing: On legs, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Agitator: Yes, Agitator type: Double-acting framed agitator from the top, Agitator placement: From the top, Inner diameter: Ø 2900 mm., Outer diameter: D 2989 mm., Total height: H 4330 mm., Manufacturer: Alfa Laval

Stainless steel vacuum vessel 1370 Ltr, vacuum -1/0,5bar, maximum allowed Work Temp 110C , down two outlets DN50, mounted on stainless steel frame 1220x1020mm total height 2800mm

SINK-FLOAT SEPARATION TANK for PLASTIC SCRAPS, Constructed in thick AISI 304 STAINLESS STEEL with reinforced plates and profiles, Dimensions 5,0 X 1,5 mt., Inlet hopper for shredded plastics, Flanged water in/out ports, taps and ball valves, 1,5 kw.driven rollers for material movement with Bonfiglioli gearboxes, n.1 chain conveyor on bottom to extract the sunk materials, n.1 diagonal stainless steel chain conveyor, collection drained auger for extraction of floating material, size: 5,0 x 1,5 mt., capacity: 800-1.500 kg/h depending on materials

VALOREL Stainless Steel Vessel 620 Ltr. with propeller stirrer, allowed pressure 2,5/-1bar, max. temp 150C , on top there is a inlet 50mm for clamp connection, down outlet valve diameter 2"

Measuring and marking plate cast steel-grey cast iron strongly ribbedwith mounting bracket made of steel, 565 mm highYear of construction approx. 1985Length: 1200 mmWidth: 800 mmThickness: 35/150 mmWorking height: 1030 mmWeight approx. 550 kgwith metal basevery good surface; used

Straightening and welding plate cast steel-grey cast iron heavily ribbedheavyheavy straightening plateLength 2000 mmWidth 1600 mmThickness 110 mmWorking height 600 mmPlate thickness 30 mm throughoutWeight approx. 1000 kgGood condition, good surface; used

Straightening and welding plate: cast steel-grey cast iron, heavily ribbedformer marking plate and measuring plateheavy straightening plateLength: 1000 mmWidth: 800 mmThickness: 250 mmWorking height: 820 mmPlate thickness: 30 mm throughout- height-adjustable metal substructureWeight: approx. 400 kgSurface rusted; used

Straightening and welding plate, cast steel-grey cast iron, heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 2000 mmWidth: 1000 mmThickness: 100 mmWorking height: 745 mmPlate thickness: 40 mm throughout- stable metal substructureWeight: approx. 800 kgGood condition; used

Closed stainless steel butter silo. Single jacketed. Vacuum on the silo is possible (manometer 0 / - 1,0 Bar). The horizontal buffer silo is equipped with 2 augers (driven by 1 main motor of +/- 3 kW - 380 V - 50 Hz - 1.420 rpm - n2: 14 rpm, no nametag on motor, only on drivework). Total capacity: 3.000 kg. Manhole, round, on one side and a sight glass on the same side. 1x infeed possibilities for direct connection of the outfeed pipe from a Continuous Butter Machine (CBM) on the back side and one on the side of the QHK butter silo (DN100). CIP cleanable with spraybowl in the top. Outfeed plate with 1x rectangular flange and 1x round DN100 flange on the outfeed of the silo. Excluding control panel or outfeed butterpumps., Type of Machine: Buttersilo, Capacity: 3.000 kg, Motor: +/- 3 kW - 380 V - 50 Hz - 1.420 rpm - n2: 14 rpm, Dimensions: ± 275 x 200 x 225 cm, Weight: ± 1.500 kg

Straightening and welding plate cast steel-grey cast iron heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 1000 mmWidth 1000 mmThickness 230 mmWorking height 970 mmPanel thickness 38 mm throughout- Metal baseWeight 450 kg; used

Hanging cabinet HS 1000 with sliding door Used device cleaned Dimensions: 1000 x 400 x 600 mm, WxDxH with intermediate floor

Dimensions: - Width: 1750 mm - Depth: 1500 mm - Height: 2400 mm (without base) Equipment : - Oval manhole - Remaining drain NW40, Fredrich - Clarification drain NW40, Fredrich - Sampling - Stand display - Connection for ventilation

Straightening and welding plate: cast steel-grey cast iron, heavily ribbedheavyheavy: straightening plateLength 1600 mmwidth: 1005 mmThickness: 280 mmPlate thickness approx. 85 mm, continuous- Center hole 245 mm, 400/800 mm - Tapped holes M 20, approx. 55 mm deep- Through-holes 27 mmWeight: approx. 2.5 to.Good conditionFormer press table - presumably worked on both sides; used

Measuring and marking plate cast steel-grey cast iron heavily ribbed STIEFELMAYERfrom a measuring or marking machine with hand-held measuring armMasch. No. 8530979 Year of construction approx. 1989Length 3000 mmWidth 1500 mmThickness 360 mmWorking height 690 mmPanel thickness 70 mm continuous - laterally worked at a 90 angle area 3000 x 360 mm- 6 pieces height-adjustable feet - plus 1 piece measuring arm mechanical and electrical without function the measuring range is approx. X = 2350 mm, Y = 1250 mm, Z = 1300 mmSpace requirement L x W x H 3000 x 2000 x 2500

Straightening and welding plate SIEGFRIED WEYRAUCH GemmingenCast steel-grey cast iron heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 1000 mmwidth 800 mmthickness 28/125 mmworking height approx. 850 mm- feet with adjustment screws for aligning the plateWeight 370 kggood surface; used

Inv. Num. : 9032 Type: Mec3000 Producer: Simec Created: 2019 Parameters: Switch-on hours: 9365 h Input length of the material: 6000–7000 mm. Parting diameter: 12–100 mm. Output length: 50–2000 mm.

Measuring and marking plate cast steel-grey cast iron heavily ribbed STIEFELMAYER comes from a measuring machine with a hand-held measuring armhigh-precision measuring plate with a good surfaceMasch. No. 8530979 Year of construction approx. 1989Length 5000 mmWidth 2000 mmThickness 350 mmWorking height 690 mmPanel thickness 50 mm throughout- 15 height-adjustable feet- very precise and stable longitudinal guides, screwed to the side of the plateSpace requirement L x W x H 5000 x 2120 x 400 mmWeight approx. 7500 kggood surface; used

Straightening and welding plate, cast steel-grey cast iron, heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 2000 mmWidth: 1000 mmThickness: 240 mmWorking height: 850 mmPanel thickness approx. 30 mm throughout- 5 pieces height-adjustable feetWeight: approx. 1000 kgGood surface; used

Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Mubea, hydraulic profile steel shears type HPSN 350 -Drive: hydraulic -Pressure force: 35 tons -Equipment: large support table with stops for punching -Punching -scissors -Cut -Notch -various punches and dies -Dimensions: 1460/1700/H1690 mm -Weight: 1080kg

Clamping plate with T-slots made of cast steel-grey cast ironBase plate of radial drilling machineAssembly table, assembly station, base plate for column-slewing craneLength 1850 mmWidth 915 mmPlate thickness 230 mmTable surface with T-slots 1030 x 750 mm- Clamping surface with T-slots 22 mm, distance = 250 mm- Milled top side parallel to the underside = clamping surface- Milled underside also the bars lie flat and support- Ideal as a base plateDead weight 1140 kggood condition; used

Straightening and welding plate made of steel, solid materialMachined steel plate from a tool rackLength 2980 mmWidth 1380 mmThickness 74 mm- Full steel plate- Surface milled- 4 pieces screwed trailer blocks- Plate provided with some symmetrical holesWeight approx. 2380 kg; used

Stainless steel, VA, chrome-nickel steel, material cuts, stainless steel, chrome steel, rust-free -Material: cutting and manufacturing -Round steel, tubes and sheets -different materials: in stock -Material numbers: 4301, 4541, 4571, 1.4828, 1.4876, 1.4841, 1.4878 -Please ask for the material you want with the dimensions. -Price from: per kg and cut depends on material

Steel products, flat steel, round steel, bar steel, tubes, profile tubes, square tubes, rectangular tubes, sheets, shaped steel, wide flange beams, narrow flange beams, plates, structural steel, rolled steel, drawn steel, I-beams -For our customers in the area, we offer material cut-to-size and contract manufacturing and a large selection of materials in stock -Sheets, pipes, profiles, bars and sections made of steel, stainless steel and non-ferrous metals such as aluminum, brass and gunmetal

Straightening and welded plate made of steel, solid materialMachined steel plate from a tool rackLength 2980 mmWidth 1580 mmThickness 94 mm- Full steel plate- Surface milled- 4 pieces screwed trailer blocks- Plate provided with some symmetrical holesWeight 3400 kg; used

Quick-change tool holder, tool holder head, quick-change tool holder, quick-change tool holder, quick-change tool holder, quick-change tool holder -Quick change boring bar holder: DB 2004 -Recording dimensions: see photos -Clamping diameter: 55 mm -Clamping length: 220 mm -Dimensions: 220/140/H130 mm -Weight: 9.2 kg

Quick-change tool holder, tool holder head, quick-change tool holder, quick-change tool holder, quick-change tool holder, quick-change tool holder -Quick-change turning tool holder: DB 2001 -Recording dimensions: see photos -Clamping height: 60 mm -Support length: 220 mm -Number: 2x holders available -Price: per piece -Dimensions: 220/95/H180 mm -Weight: 9.3 kg/piece

Straightening and welding plate, cast steel-grey cast iron, heavily ribbedheavyheavy, straightening plateLength: 1985 mmWidth: 1000 mmThickness with ribs: 220 mmWorking height: 860 mmPanel thickness: approx. 35 mm throughout- 4 pieces height-adjustable feetWeight 1050 kg; used

Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 29 to -Punching: -Scissors: -to cut: -not: -mechanical release: -div. Punches and dies: -Length stop: -Installation dimensions: 1300/1570/H1900 mm -Transport dimensions: 1300/770/H1900 mm -Weight: 1112 kg

Straightening and welding plate cast steel-grey cast iron heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 2000 mmwidth 1000 mmthickness 160 mmworking height 850 mmplate thickness approx. 35 mm throughout- 3 pieces height-adjustable feetWeight with feet 680 kggood condition; used

Straightening and welding plate, cast steel-grey cast iron, heavily ribbedformer marking plate and measuring plateheavy straightening platelength: 2000 mmwidth: 1000 mmthickness: 260 mmworking height: approx. 850 mmplate thickness: approx. 40 mm throughout- 5 pieces, height-adjustable feetWeight with feet: 1250 kggood condition; used

Straightening and welded plate cast steel-grey cast iron heavily ribbedheavyheavy straightening plateLength 1600 mmWidth 1000 mmThickness 210 mmPanel thickness approx. 32 mm throughoutTable height / working height 565 mm- very stable steel table substructure (self-made)- plate with substructure can be moved by pallet truckWeight 740 kggood condition; used

Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box made of: stainless steel -Stuffing box for: Ø 38 mm shaft -for: gland tape -Price: per piece -Number: 8 pieces -Dimension: Ø 101 x 45 mm -Weight: 1 kg

Straightening and welding plate Cast steel-Grey cast iron heavily ribbedCast plate, heavy straightening plateLength 1500 mmWidth 1000 mmThickness 100 mmPanel thickness approx. 37 mm continuousTable height 860 mm- Table base made of steel (self-made)Weight 640 kgGood condition; used

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers -Diameter roller: 50 mm -Transport roller width: 265 mm -Total length: 310 mm -Socket: Ø 14 mm -Wrench size: 12 mm -Number: 30 rolls available -Price: per piece -Weight: 0.9 kg/piece

Straightening and welded plate cast steel-grey cast iron heavily ribbedheavyheavy straightening plateLength 2000 mmWidth 1500 mmThickness 125 mmBoard thickness approx. 40 mm continuousTable height 880 mm- Table base made of steel (self-made)Weight 1700 kgGood condition; used

Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: made of stainless steel -Stuffing box: for Ø 60-62 mm shaft -for gland tape -Number: 19x glands available -Price: per piece -Dimensions: 147/147/H70 mm -Weight: 2.8 kg