a1 steel sheds used for sale

701 litre, Stock number: T3325, Litre: 701, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Open with pneumatically controlled lid, Bottom: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Agitator: Yes, Agitator type: Horizontally frame agitator with scrape, Motor: 1,1 kW - 220/380 Volt - 27 rpm., Working temperature: 5 - 144° C, Working pressure double jacket: 3,0 Baro, Inner diameter: Ø 1050 mm, Outer diameter: D 1150 mm, Dimensions: W 1800 x H 1620 mm, Manufacturer: ALA, Year: 1986

701 litre, Stock number: T3324, Litre: 701, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Open with pneumatically controlled lid, Bottom: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Agitator: Yes, Agitator type: Horizontally frame agitator with scrape, Motor: 1,1 kW - 220/380 Volt - 27 rpm., Working temperature: 5 - 144° C, Working pressure double jacket: 3,0 Baro, Inner diameter: Ø 1050 mm, Outer diameter: D 1150 mm, Dimensions: W 1800 x H 1620 mm, Manufacturer: ALA, Year: 1986

701 litre, Stock number: T3322, Litre: 701, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Open with pneumatically controlled lid, Bottom: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Agitator: Yes, Agitator type: Horizontally frame agitator with scrape, Motor: 1,1 kW - 220/380 Volt - 27 rpm., Working temperature: 5 - 144° C, Working pressure double jacket: 3,0 Baro, Inner diameter: Ø 1050 mm, Outer diameter: D 1150 mm, Dimensions: W 1800 x H 1620 mm, Manufacturer: ALA, Year: 1986

701 litre, Stock number: T3323, Litre: 701, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Open with pneumatically controlled lid, Bottom: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Agitator: Yes, Agitator type: Horizontally frame agitator with scrape, Motor: 1,1 kW - 220/380 Volt - 27 rpm., Working temperature: 5 - 144° C, Working pressure double jacket: 3,0 Baro, Inner diameter: Ø 1050 mm, Outer diameter: D 1150 mm, Dimensions: W 1800 x H 1620 mm, Manufacturer: ALA, Year: 1986

200 litre, Stock number: T3317, Litre: 200, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On 2 pcs. leg console, Top: Open with lid, Double jacket: Yes, Agitator: Yes, Agitator type: Frame agitator from the top, Motor: 1,5 kW - 220/380 Volt, Inner diameter: Ø 740 mm, Dimensions: L 1360 x W 1000 x H 2670 mm, Other: Tiltable

5.000 litre, Stock number: T1798, Litre: 5.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On legs, Top: Conical, Bottom: Conical, Insulated: Yes, Outer cladding: Riveted plate, Tank cover: In the top, Inner diameter: Ø 2000 mm

170 litre, Stock number: T3314, Litre: 170, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Vessel, Standing: 4 pcs. of legs, Top: Open, Bottom: With drop, Inner dimensions: L 700 x W 700 x H 450 mm, Outer dimensions: L 800 x W 800 x 850 mm, Other: Strengthening ring in the top

15.000 litre, Stock number: T1769, Litre: 15.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On rack with 4 pcs. legs, Top: Conical, closed, Bottom: Flat, sloping, Tank cover: In the side, 430 x 320 mm., Inner diameter: Ø 2000 mm.

300 litre, Stock number: T3315, Litre: 300, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. of legs with wheels, Top: Open with lid, Bottom: Conical, Double jacket: Yes, Agitator: From the top, Motor: 0,37 kW - 220/240 Volt - 46 rpm., Inner diameter: Ø 690 mm, Outer diameter: D 710 mm, Total height: H 1640 mm, Other: Turbulence plate

200 litre, Stock number: T1690, Litre: 200, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Barrel, Standing: On strengthening ring, Top: Open with lid, clamping fixture and strengthening ring, Inner diameter: Ø 560 mm, Total height: H 825 mm

7.000 litre, Stock number: T3311, Litre: 7.000, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Dished, Bottom: Dished, Heating coil: In bottom, Insulated: Yes, Outer cladding: Riveted, Tank cover: In the top, Ø 500 mm, Inner diameter: Ø 1790 mm, Outer diameter: D 1900 mm, Total height: H 4120 mm

Anleger Einzelbogen - Single Sheet Feeder Stahl Solo M2222 Year 1985 - Serial-No. 29327/85 Solo Feeder / Einzel-Anleger Unterflur-Sauganleger / Non-Stop Feeder

4.000 litre, Stock number: T3302, Litre: 4.000, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Dished, Bottom: Dished, Heating coil: Outside, Agitator: Diff. flanges in the top, Inner diameter: Ø 1500 mm, Total height: H 3730 mm, Year: 1999

Work table packing table workbench with stainless steel top, rear upstand and 2x lockable containers RA1802 Work table made of metal, painted white, used worktop with stainless steel surface (traces of wear) Dimensions: Width: 2200mm depth: 600mm height: 775mm Lockable container with door (1x left, 1x right) Container in 2 different colors (turquoise and purple) Container dimensions: 300 x 410 x 550 mm (WxHxD) All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

5.500 litre, Stock number: T3295, Litre: 5.500, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Dished, Bottom: Dished, Tank cover: Inspection cover in the top, Agitator: Yes, Agitator type: Propeller, Motor: 3 kW - 380/660 Volt - 475 rpm., Inner diameter: Ø 1800 mm, Total height: H 4750 mm, Other: 3 pcs. lifting eyes

Straightening and welded plate cast steel-grey cast iron strongly ribbedLength 2000 mmWidth 1200 mmThickness 150 mmWorking height 800 mmPanel thickness 35 mm- Substructure made of solid woodWeight approx. 950 kgGood surface; used

1.200 litre, Stock number: T3266, Litre: 1.200, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Cooking vat, tiltable, Standing: On legs, Top: Open, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Agitator: Yes, Agitator type: Anchor agitator with scrape from the bottom, Working temperature: 0-90° C, Working temperature double jacket: 0-143° C, Working pressure tank: -0/+0 bar, Working pressure double jacket: +0/+3 bar, Inner diameter: Ø 1600 mm, Outer diameter: D 1740 mm, Manufacturer: SRS, Model/type: KDA 1200, Year: 2003

2.000 litre, Stock number: T3254, Litre: 2.000, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 5 pcs., Item: Tank, Standing: 3 pcs. legs incl. adjustable toe, Top: Conical, Bottom: Conical, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 495 mm, Agitator: Yes, Agitator type: 3-bladed propeller, Motor: 1,4 kW - 705 rpm., CIP: Yes, Inner diameter: Ø 1425 mm, Outer diameter: D 1565 mm, Total height: H 2790 mm

Straightening and welding plate cast steel-grey cast iron heavily ribbedheavy straightening plateLength 3050 mmWidth 2000 mmThickness 300 mmPanel thickness approx. 55 mm throughoutWeight approx. 4.5 ton.Good condition; used

50 litre, Stock number: T3240, Liter 1: 20, Liter 2: 50, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tiltable boiler, Standing: On frame with wheels, Top: Open with lids, Motor: 9,6 kW - 3 x 380 Volt, Inner diameter: G1: Ø 380 mm G2: Ø 480 mm, Dimensions: L 1800 x W 700 x H 1080 mm, Other: Electric heated

10.000 litre, Stock number: T3231, Litre: 10.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Dished, closed, Bottom: Dished, Tank cover: In the side, Agitator: Yes, and flange for agitator in the side, Agitator type: Mixing wing, D 450 mm., Agitator placement: From the top, Motor: 1,35 kW - 220/380 Volt, Inner diameter: Ø 1980 mm., Total height: H 4185 mm., Other: Leg frame included

890 litre, Stock number: T3211, Litre: 890, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 2 pcs., Item: Tank, Standing: 3 pcs. legs, Top: Dished, Inspection cover: In top, Ø 180 mm, Inner diameter: Ø 1050 mm, Total height: H 1720 mm

We offer you the following for purchase here: Item number: 4969 Beckhoff CPPC 7112-1007 Beckhoff PC Monitor with Stainless Steel Keyboard Beckhoff CPPC 7112-1007 Beckhoff PC Monitor with stainless steel keyboard Motherboard: Boser HS6237 SBC CPU: Intel Celeron Memory: 128 MB SDRAM Slot 1: Slotplate with USB ports and DVI-port Ivisuqoho Slot 2: Boser SBC-V2.2B Slot 3: Slotplate with COM 1 and COM 2 Slot 4: Slotplate with LPT 1 Harddisk: Toshiba MK2023GAS, 20GB CD ROM: Teac 235HF 1.44MB A: Display: 15 inch Toshiba LTM 15C428S The monitor does not include a touchscreen. Touchpad: Glidepoint on PS/2 Ports: KT 7000 on PS/2 Power supply: 24V Dc Lodk Rqeu Ef Rqefcushi Item condition: used More PC monitors - new and used - can be found in our shop! International shipping costs on request!

1.500 litre, Stock number: T3215, Litre: 1.500, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Tank cover: In the top, Ø 450 mm, Inner diameter: Ø 1150 mm, Total height: H 1850 mm, Other: Strenthening ring in the top and bottom - Outlet well

26,000 litre milk tank / agitator tank / storage tank made of V2A Properties: Volume 26000 L Material V2A (AISI 304) 1.4301 Total height 7200 mm Cylinder height 4500 mm Diameter 3400 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description: Topsoil: Clapper bottom 2 crane eyes Level measurement 1/2" CIP line with CIP cleaning Tank cylinder: Manhole 450 x 370 mm Agitator mixer Stelzer type SN-63 H D2 - side with propeller (for tank ST2 right, for tank ST1 left) Socket 1/2" Subsoil: Clapper bottom with foot ring Outlet surround with flange connection Sensor for level measurement Important note: The agitator installed here contains a seal that must be protected from dry running.

30.000 litre, Stock number: T3207, Litre: 30.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Lying: In leg cradles, 3 pcs., End bottoms: Conical, Insulated: Yes, Outer cladding: Riveted cladding, Tank cover: In the end bottom, Agitator: Yes, Agitator type: Ribbon, Agitator placement: In the bottom, Motor: 5,5 kW, CIP: In the top, 3 pcs., Inner diameter: Ø 2400 mm., Outer diameter: D 2600 mm., Total length: L 8500 mm., Other: The outer cladding is in poor condition

40,000 liter agitator tank / storage tank insulated from V2A Properties: Volume 40000 L Material V2A (AISI 304) 1.4301 Insulation 100 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Total height 6300 mm Cylinder height 4500 mm Diameter 3900 mm Number of feet 6 Description: Topsoil: Curved bottom 2 crane eyes CIP ball on the side Level measurement with socket 1/2" Agitator agitator decentralised with 4 paddle stages Manhole Ø DN 440 Breathing nozzle Ø 700 mm with condensation drain 2 x CIP Ball Subsoil: Flat bottom with small cone bottom at the front forward-drawn residual drain pipe with flanges DN80 6 tube feet with spherical plates - height adjustable with base plate

3.300 litre, Stock number: T3197, Litre: 3.300, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Open, Bottom: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Agitator: Yes, Agitator type: Frame agitator from the top with bottom guideway, Motor: 10 HK - 380 Volt - 22 rpm., Working pressure: 4,0 Baro, Inner diameter: Ø 1570 mm, Outer diameter: D 1750 mm, Total height: H 3360 mm, Manufacturer: ALA, Year: 1978

30,000 liter agitator tank / storage tank insulated from V2A Properties: Volume 30000 L Material V2A (AISI 304) 1.4301 Insulation 60 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Total height 6000 mm Cylinder height 3700 mm Diameter 3900 mm Number of feet 4 Description: Topsoil: Curved bottom CIP Ball Guiding Beam CIP Ball Sensor for level measurement Threaded Socket DN65 Stick Agitator Mixer with Propeller Manhole Ø DN 480 Ventilator DN 300 Tank cylinder: Tasting tap Subsoil: Cone base Outlet surround with disc valve DN80 Sensor for level measurement 4 profile feet with domes - height-adjustable with base plates

1.600 litre, Stock number: T3187, Litre: 1.600, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs with truck grip, Top: Dished, Bottom: Dished, Tank cover: In the top, Ø 400 mm, Agitator: Prepared for magnet agitator in the bottom, Working temperature: 0-20° C, Working pressure: -1/0, Inner diameter: Ø 1350 mm, Total height: H 1800 mm, Manufacturer: Rønne maskinfabrik, Model/type: 2343, Year: 1995, Other: High gloss polished on the inside

60,000 litre service water tank UTH made of V2A insulated horizontal Properties: Volume 60000 L Overall length 6100 mm Cylinder length 4500 mm Total height 4300 mm Diameter 4200 mm Material V2A (AISI 304) 1.4301 Insulation 150 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Horizontal design Number of feet 4 Description: Tank crest: CIP Ball Ventilation nozzle In front: Level indicator with scale Manhole 440 x 340 mm Ladder hooks Residual drain with disc valve Thermometry Subsoil: 4 trumpet feet with domes - height adjustable with bearing cup stiffener Thermometry Behind: Connection Thermometry

2.200 litre, Stock number: T3194, Litre: 2.200, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs , Top: Conical, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 455 mm, Agitator: Flange for agitator in the top, CIP: Yes, Inner diameter: Ø 1435 mm, Outer diameter: D 1575 mm, Total height: H 2730 mm, Manufacturer: Alfa Laval, Model/type: BV 3R

3,000 litre agitator tank made of V2A Properties: Volume 3000 L Material V2A (AISI 304) 1.4301 Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Total height 3500 mm Cylinder height 2000 mm Inner diameter 1350 mm Width 1500 mm Number of feet 3 Vertical design Last use of additives Description: Topsoil: Inclined cone base Level measurement Filling line pulled down Thermometry CIP Ball Manhole Ø 450 mm Agitator with propeller Ventilator Ø 350 mm Tank cylinder: CIP ball at the bottom of the agitator propeller Agitator type R132S - 8/4 PRG motor. No. 82/495 Flow breakers around propellers Perforated Pipe Tube Subsoil: forward-drawn residual drain pipe with disc valve Thermometry 3 trumpet feet with dome height adjustable with stiffeners on the legs and bottom

3.000 litre, Stock number: T3165, Litre: 3.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Conical, Bottom: Conical, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 450 mm, Agitator: Flange for agitator in the side, Inner diameter: Ø 1400 mm, Outer diameter: D 1550 mm, Total height: H 3400 mm

16,000 litre milk tank/ agitator tank / pre-stacking tank Properties: Volume 16000 L Material V2A (AISI 304) 1.4301 Total height 3500 mm Cylinder height 2800 mm Inner diameter 2900 mm Outer diameter 3100 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description Tank was used for the pre-stage of finished product. Topsoil: Inclined cone base 2 crane eyes CIP Cleaning Vent nozzle Thermometry Tank cylinder: insulated 6 cm Manhole 450 x 350 mm Agitator mixer Stelzer type DRK6P/12 with propeller CIP ball under the agitator Thermometry Level measurement Subsoil: Flat bottom with 3% slope Residual drain pipe with flanges Motor Tank 1/4 - Agitator to the left of Manhole Agitator Mixer Stelzer Type DRK6P/12 No.39139 IP44 Re Art. S1 7.571.5 kW 970/480 rpm 50 Hz 380 V YY/Y switch. 16 ...

13.000 litre, Stock number: T3155, Litre: 13.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical, closed, Bottom: Conical, Heating : Prepared for electricity heated in the side, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the side, Agitator placement: Flange for agitator in the top, Inner diameter: Ø 2600 mm., Outer diameter: D 2720 mm., Total height: H 3750 mm., Other: The tank is slightly dented on the shroud

10.000 litre, Stock number: T3147, Litre: 10.000, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Dished, closed, Bottom: Sloping, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 400 mm. - In the side, Turbolence plate: Yes, Agitator: Flange for agitator in the side, CIP: Yes, 2 pcs., Inner diameter: Ø 1980 mm., Outer diameter: D 2130 mm., Total height: H 4500 mm.

Max. punching force: 700 kN Projection: 510 mm Cuts on flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat bar Range of tools is included in the price Weight: 3,000 kg

10.000 litre, Stock number: T3148, Litre: 10.000, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical, closed, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fiber, Tank cover: In the side, Agitator: Flange for agitator in the side, CIP: Yes, Inner diameter: Ø 2020 mm., Outer diameter: D 2200 mm., Total height: H 4250 mm., Manufacturer: Helsted, Year: 1975

Stock number: D650, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 stk., Item: Table, Size: L 1300 x W 620 x H 450 mm., Legs: 4 pcs.

325 litre, Stock number: T3146, Litre: 325, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Conical, Bottom: Conical, Tank cover: In the top, Ø 420 mm, CIP: Yes, Working temperature: Max 20° C, Inner diameter: Ø 1050 mm, Total height: H 1500 mm, Manufacturer: J.H. Stålindustri, Year: 1993

S58 - used approx. 67 m³ / 67.000 L steel tank, standing. Technical details: Content: approx. 67 m³ / 67,000 litres Material: Steel tank single-walled Manufacturer: GEMS Metaalwerken Dimensions: approx. Ø 3.00 m × H Tank 9.90 m / H incl. railing 11.50 m Other: Used steel tank, professionally cleaned and in good condition. Vertical storage tank with flat bottom, dome on the tank body and on top of the roof, several inlets and outlets. Tank repainted from the inside in reddish brown (with a paint for the interior paint Brantho-Korrux "3 in 1", anti-rust paint, metal protection paint, maintenance paint, Brantho-Korrux 3in1 may be used according to the regulations of the Federal Health Office (XL) for the interior coating of food containers and food processing machines (tested by Lab. Dr. Kittel 01/1989). Only the pure tank is sold, without add-on parts such as pipes, fit ...

1.500 litre, Stock number: T3142, Litre: 1.500, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 3 pcs., Item: Transportation tank, Standing: In galvanized frame, Bottom: Conical, Tank cover: In the top, Ø 430 mm, Dimensions: L 1220 x W 1020 x H 2170 mm, Other: 4 pcs. of stacking brackets at the top

- Grapes: 500 kg - Dimensions: height 100 cm, diameter 90/95 cm - Condition: OK / Used

1.300 litre, Stock number: T3141, Litre: 1.300, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 7 pcs., Item: Transportation tank, Standing: Galvanized frame with 4 pcs. legs, Bottom: Conical, Tank cover: In the top, Ø 460 mm, Dimensions: W 1000 x L 1200 x H 2190 mm, Other: 4 pcs. of stacking brackets at the top

pressure: 60,0 t square edge steel: 35,0 mm round bar steel: 40,0 mm L-beam: 120x120x12 mm punching cross-cut in cmm: Ø28 in 15 / Ø38 in 11 mm throat: 220 mm flat steel: 200x20 / 300x15 mm blade length: 317 mm oil volume: 45,0 ltr. work height max.: 940 / 1140 mm strokes per minute: max. 26 work stroke: 55,0 mm total power requirement: 4,0 kW weight of the machine ca.: 1425 kg. Dimensions (HxWxD): 1510 x 590 x 1570 mm Furnishing: - Support table at the hole punch - Support table on the square notcher - foot switch - Bed. Instructions - CE declaration + MUBEA - punch and die holder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.