a1 steel sheds used for sale

Stainless steel countersunk screws with slot, 120 pieces PAGUS M10 x 40 mm DIN 963, ISO 2009 Pitch: 1.5 head diameter: 18 mm Slot width: 2.5 mm Slot depth: 2.0 mm Material: Stainless steel New ! Dimensions ( packaging ): 235 x 150 x 130 mm

Stainless steel countersunk screws with slotted, 100 pieces PAGUS M12 x 40 mm DIN 963, ISO 2009 pitch: 1.75 head diameter: 22 mm slot width: 3.0 mm slot depth: 2.4 mm Material: stainless steel New ! Dimensions ( packaging ): 235 x 150 x 130 mm

BATCH TYPE PASTEURIZATION TANK SUITABLE FOR HEATING AND COOLING TYPE: Jacketed and insulated tank CAPACITY: 1.000 l/h milk INCLUDING: Paddle mixer with motor and reductor, thermomter and manhole. Batch pasteurizer tank for milk, juice, dairy productsetc They are heated by steam, pressure max. 2 BAR. ( they are jackated and insulated ) Outer dimensions are as below; Diameter: 130 cm Height: 160 cm The motor power of the mixer is 0,75 kW. There is a thermometer mounted on the top to see the product temperature. There is a CIP ball mounted on top inside in order to clean the tank. There are side plates to prevent vortex inside. 2 PCS AVAILABLE

Stainless steel countersunk screws with slotted, 90 pieces PAGUS M12 x 40 mm DIN 963, ISO 2009 pitch: 1.75 head diameter: 22 mm Slot width: 3.0 mm Slot depth: 2.4 mm Material: Stainless steel New ! Dimensions ( packaging ): 235 x 150 x 130 mm

Stainless steel drainage channel, drainage channel, collecting channel, with feet PAGUS 2300 x 90 x 100 mm height upper edge: 800 mm Drain pipe: Ø 60 x 500 4 feet, height adjustable, approx. 30 mm Material: stainless steel used, tested ! Dimensions: 2300 x 500 x 800 mm

IBC stainless steel container, liquid container, cubic IBC with frame UMFORMTECHNIK HAUSACH GmbH 1000 l UN31A / Y / 11.97/ D / UH / BAM 0010 / 12420 / 2100 Wall thickness min: 1.5 mm Filling / emptying pressure: 0.1 bar Material ( tank ): Stainless steel ( 1.4301 ) Material ( frame ): Steel (galvanized) Weight: approx. 220 kg used, tested ! Dimensions: ca 1220 x 1020 x 1650 mm

Stainless steel threaded rod, 5 pieces WÜRTH M20 x 2,5 Length: 1990 mm Material: Stainless steel ( V4A ) New ! Dimensions( packaging ): 2000 x 100 x 100 mm

Stainless steel wire with grub screws, 50 pieces SOLIBRO TC002969 diameter (stainless steel strand): Ø 0,85 mm Total length: 1732 mm 2x set screw: M5 x 0.8, right-hand thread, length: 40 mm Material: stainless steel ( 1.4401 ) New ! Dimensions ( packaging ): 220 x 170 x 100 mm

Stainless steel funnel PAGUS 850 x 834 x 565 mm opening: 735 x 720 mm Mounting flange: 850 x 834 mm Pipe connection: DN 150 Outlet: DN 250 Inspection opening: Ø 225 x 330 mm ( without lid ) Material: Stainless steel material thickness: 2.5 mm used , tested ! Dimensions: 850 x 834 x 565 mm

Stainless steel welding wire, wire electrode PAGUS Diameter: Ø 0.8 mm Quantity: approx. 12.0 kg Reel: Ø 300 mm New ! Dimensions ( single ): 300 x 300 x 100 mm

steel winch, rack and pinion winch, stick winch DKF STEHLAGERWERK MÜHLHAUSEN 05.13 Load capacity: 2.0 t Attachment height: 250 mm Lifting height: 1370 mm Crankpin: Ø 40 x 120 mm Base: 160 x 200 mm used, tested ! Dimensions ( standing ): 500 x 250 x 1590 mm

Stainless Steel Mesh, Metal Wire Mesh Va PAGUS 2040 x 7300 mm Width: 2040 mm Length: approx. 7,7,3 m ( calculated ) Material thickness: approx. 0.22 mm ( measured ) Wire thickness: approx. 0.1 mm ( measured ) Material: stainless steel Weight: approx. 9.0 kg ( net ), 10.2 kg ( gross ) New ! Dimensions: 2100 x 85 x 85 mm

Stainless steel cable duct accessories ELECTRIX 2x cable duct connection bracket P19 - 75 2x duct end seals P18 100 x 75 1x funnel 80 x 150 mm to 80 x75 mm 4x cable holder PCR 100 1x 90° contra-angle handpiece 100 x 75 mm, Inner lid 1x 90° contra-angle handpiece 100 x 75 mm, outer lid Material: stainless steel, polished material thickness: 1.2 mm New ! Dimensions ( packaging ): 315 x 225 x 220 mm

Stainless steel welding rod AVESTA WELDING Ø 2,4 x 1000 mm 316-Si/SKR-Si tw8321-240000 Material No.: 1.4430 Diameter: Ø 2.4 mm Rod length: 1000 mm Quantity: approx. 5.0 kg New ! Dimension ( packaging ): 1060 x 55 x 60 mm

Stainless steel welding rod OERLIKON Ø 2.4 x 1000 mm INERTFIL 2520 E 98 003227 Diameter: Ø 2.4 mm rod length: 1000 mm Quantity: approx. 9.9 kg New Dimensions ( packaging ): 1020 x 65 x 40 mm

Stainless steel welding rod BÖHLER Ø 1.6 x 1000 mm Diameter: Ø 1.6 mm Rod length: 1000 mm Quantity: approx. 21.0 kg New ! Dimensions (packaging): 1020 x 80 x 60 mm

Stainless steel welding rod BÖHLER Ø 1,6 x 1000 mm SAS 4-IG Material No.: 1.4576 Diameter: Ø 1.6 mm Rod length: 1000 mm Quantity: approx. 25.0 kg New ! Dimension ( packaging ): 1020 x 80 x 60 mm

Stainless steel welding rod BÖHLER Ø 1,0 x 1000 mm SAS 4-IG Material No.: 1.4576 Diameter: Ø 1.0 mm Rod length: 1000 mm Quantity: approx. 25.0 kg New ! Dimension ( packaging ): 1040 x 100 x 60 mm

Stainless steel welding rod BÖHLER Ø 1,0 x 1000 mm SAS 4-IG Material No.: 1.4576 Diameter: Ø 1.0 mm Rod length: 1000 mm Quantity: approx. 11.2 kg New ! Dimension ( packaging ): 1040 x 100 x 60 mm

Weld-on hinge with steel pin, weld-on tape, 25 pieces PAGUS 60 x 10 mm Total length: 60 mm Diameter: Ø 10 mm Lug width: 12 mm Steel pin: Ø 6 x 18 mm Brass disc: Ø 6 / 10 x 2 mm Other quantities on request ! New ! Dimensions ( weld-on hinge ): 61 x 12 x 10 mm Dimensions ( packaging ): 115 x 100 x 35 mm

Stainless steel impeller, impeller, radial impeller PAGUS Ø 500 mm diameter : Ø 500 mm width: 100 mm Number of blades: 6 for shaft diameter: Ø 24 mm, minimum length: 62 mm groove width: 8 mm Material: stainless steel New Dimensions: 505 x145 x 505 mm

Two-piece pipe clamp with nut, stainless steel pipe clamp, 21 pieces FALU 4x 3/4 ( inch ) 17x 1 ( inch ) Clamp width: 30 mm Thread: M8 x 1.25, Depth: 10 mm Material: Stainless steel Other quantities on request ! New ! Dimensions ( packaging ): 200 x 140 x 60 mm

Steel winch, rack and pinion winch, stick winch J.d.n., j. d. NEUHAUS Typ 200 Jumbo Load capacity: 7500 kg ( 7.5 t ) stroke: 180 mm Attachment height: 75 / 385 mm Lifting height: 255 / 565 mm Lifting pin: Ø 55 x 55 mm Attachment surface: 60 / 95 mm Base: 130 x 140 mm used, tested ! Dimensions ( standing ): 270 x 230 x 385 mm

Weld-on hinge with steel pin, weld-on tape, 23 pieces PAGUS 80 x 13 mm Total length: 80 mm Diameter: Ø 13 mm Lug width: 15 mm Steel pin: Ø 8 x 23 mm Brass disc: Ø 8 / 13 x 2 mm Other quantities on request ! New ! Dimensions ( weld-on hinge ): 82 x 15 x 13 mm Dimensions ( packaging ): 125 x 85 x 45 mm

Weld-on hinge with steel pin, weld-on tape, 70 pieces PAGUS 60 x 10 mm Total length: 60 mm Diameter: Ø 10 mm Lug width: 12 mm Steel pin: Ø 6 x 18 mm without brass washer ! Other quantities on request New ! dimensions ( weld-on hinge ): 61 x 12 x 10 mm Dimensions ( packaging ): 150 x 75 x 70 mm

Screw hinge with steel pin, hinge, 10 pieces PAGUS 43 x 38 x 32 mm Opening angle: approx. 200° screw-on strap: 42 x 25 mm hole spacing: 25 mm, 2x countersunk hole: Ø 6,5 mm steel pin: Ø 6 x 10 mm with brass disc ! Material: Aluminium Other quantities on request ! New ! Dimensions ( weld-on hinge ): 43 x 38 x 32 mm Dimensions ( packaging ): 220 x 200 x 40 mm

Control cabinet, PC cabinet, control cabinet PAGUS 1980 x 820 x 600 mm with keyboard drawer in writing desk and 2nd drawer installation option for PC and monitor stainless steel - control cabinet Dimensions: 1980 x 820 x 600 mm

Stainless steel plastic work table PAGUS Table surface: 1270 x 590 mm with perforated grid ! stainless steel frame ! shelf changeable cable duct at the back Dimensions: 1300 x 700 x 790 mm

Tank, container WABAG / LUDWIG EDEL 43.9631.46.01 capacity: 7600 litres built: 1991 zul. Operating pressure: 0.1 bar zul. Operating temperature: 40°C Diameter: Ø 2330 mm stainless steel ! used, tested ! Dimensions: 2590 x 2450 x 2300 mm

Stainless steel basket, immersion basket Pagus Inside dimensions: 480 x 315 x 55 Mesh size: 8 x 8 mm stainless steel ! net slightly damaged ! Dimensions: 500 x 330 x 400 mm

Steel winch, rack and pinion winch, stick winch DKF STEHLAGERWERK Type 1010 Load capacity: 10.0 t Attachment height: 90 / 700 mm stroke: 300 mm used, tested ! Dimensions: 700 x 450 x 230 mm

Stainless steel expansion joint, pipe connector, flexible connection pipe TOKYO NISSHIN JABARA (TNJ) DN 80 width 615 mm Flange: Ø 200 mm stainless steel ! Dimensions: 200 x 220 x 615 mm

Cocking lever OTTO GANTER (probably) 10 pcs. Steel clamping lever adjustable M16 / 80 mm (GN 212.3-33-M16-80-D) 180 x 150 x 35 mm New Dimensions: (total) approx. 200 x 200 x 200 mm

Lattenbreithalter M.; T.L. Lattenbreithalter Edelstahl 3600 2352.8611 069.670 .6-19 Diameter: Ø 153 mm Storage: 120 x 120 mm hole spacing: 80 x 80 mm New ! Dimensions: 3800 x 170 x 170 mm

Lattenbreithalter M.; T.L. Lattenbreithalter Edelstahl 3700 2352.8611 069.670 .6-19 Diameter: Ø 153 mm Storage: 120 x 120 mm hole spacing: 80 x 80 mm New Dimensions: 3900 x 170 x 170 mm

Steel winch, rack and pinion winch, stick winch DKF STEHLAGERWERK Type 0310 Heavy version load capacity: 3.0 t Attachment height: 70 / 700 mm stroke: 400 mm used, tested ! Dimensions: 710 x 220 x 210 mm

Stainless Steel Welding Wire, MIG Wire Electrode, Solid Wire AVESTA 316LSI/SKRSI DIN 8556 SG X 2 CRNIMO 19 12 W.-No. 1.4430 Diameter: Ø 1.6 mm Spool: Ø 300 mm Quantity: 12 kg New ! Dimensions: 310 x 110 x 300 mm

Stainless steel welding wire, MAG wire electrode AVESTA 316L-SI/SKR-SI DIN 8556 SG X 2 CRNIMO 19 12 W.-No. 1.4430 Diameter: Ø 1.0 mm Spool: K300 Quantity: 15 kg New ! Dimensions: 310 x 110 x 300 mm

Profile steel scissors, hand lever scissors SCHERENBAU NOSSEN ScDH 10 Knife length: 180 mm round: 24 mm square: 22 mm angle: 60 x 7 mm throughout: 10 mm mobile ! used, checked ! Dimensions: 1300 x 700 x 1600 mm

Measuring and marking plate, measuring table Cast steel strongly ribbed STIEFELMAYER of a measuring or scribing machine with hand-held measuring arm Year of construction 1985 Length 2000 mm Width 1500 mm Thickness 350 mm Plate thickness (top) 50 mm solid material with 300 mm ribs Working height approx. 800 mm - manually movable with measuring arm , measuring range X=1490 mm, Y = 1000 mm, Z = 1250 mm - with 3-axis digital display Grundig MZ 1030 - machined side surface at 90 angles to the table surface, 2000 x 350 mm - 5 pieces height-adjustable feet Space requirements L x W x H 2000 x 1500 x 2500 mm Weight approx. 2600 kg good condition; used

Stainless steel ball valve, 2 pieces, for use with pneumatic valve actuators PAGUS DN15 R1/2 F03/F04 drive: 9 x 9 mm Adapter: 14 x 14 mm Flange: 45 x 45 mm Material: Stainless steel (1.st 4408) New Dimensions(one ball valve): 75 x 50 x 80 mm

Stainless steel ball valve PAGUS DN20 PN64 installation length: 102 mm Connection flange: Ø 50 mm Material: stainless steel used, tested ! Dimensions: 195 x 50 x 95 mm

FES valve made of stainless steel, with threaded ring FLUX-GERÄTE GmbH FES valve: 10-001 14 192 pump diameter: Ø 41 mm threaded ring: 10-001 14 329 male thread: S 57 x 4 used, tested ! Dimensions: 82 x 72 x 112 mm

FES valve made of stainless steel, with threaded ring FLUX-GERÄTE GmbH FES valve: 10-001 14 192 pump diameter: Ø 41 Thread valve outlet: G 1/4 Threaded ring: 10-001 14 329 male thread: S 57 x 4 used, tested ! Dimensions: 92 x 72 x 112 mm

FES valve made of stainless steel, with threaded ring FLUX-GERÄTE GmbH FES valve: 10-001 14 192 pump diameter: Ø 41 mm Thread valve outlet: G 1/4 Threaded ring: 10-001 14 325 male thread: G 2 used, tested ! Dimensions: 92 x 72 x 105 mm

FES valve made of stainless steel, with threaded ring FLUX-GERÄTE GmbH FES valve: 10-001 14 192 pump diameter: Ø 28 mm ( welded-in reduction ) threaded ring: 10-001 14 329 male thread: S 57 x 4 used, tested ! Dimensions: 82 x 72 x 113 mm

Stainless steel ball valve, 1-piece, reduced passage, 6 pieces SERTO SO BV 58D00-1/2 068.8061.080 DN15 PN130 installation length: 65 mm width across flats: 28 mm connection thread: G 1/2 inch reduced passage: Ø 9.2 mm Material: Stainless steel (1.4408 ) New ! Dimensions ( single ball valve ): 135 x 31 x 71 mm Dimensions ( packaging ): 205 x 160 x 95 mm

Stainless steel ball valve, 3-part, full bore, with welding ends MECAFRANCE, MF DN40, PN40 installation dimensions: approx. 65 mm pipe inner diameter: Ø 30 mm length hand lever: 180 mm Material: stainless steel used, tested ! Dimensions: 290 x 61 x 95 mm

Stainless steel ball valve, ball valve, 3 parts, full passage MECAFRANCE, MF DN25, PN40 installation dimensions: 85 mm thread: G 1 ( inch ) length hand lever: 160 mm material: stainless steel ( 1.4408 ), seal of the spindle: PTFE used, tested ! Dimensions: 203 x 63 x 95 mm

Stainless steel ball valve, ball valve, 3 parts, full passage MECAFRANCE, MF DN40, PN40 installation dimensions: 110 mm thread: G 1 1/2 ( inch ) length hand lever: 200 mm material: stainless steel ( 1.4408 ), seal of the spindle: PTFE used, tested ! Dimensions: 265 x 79 x 180 mm