a f used for sale

For sale is a completely overhauled turbocharger from the manufacturer ABB, model TPS57E01. This turbocharger has an operating time of 0 hours since its complete overhaul, so it is in mint condition. The internal reference number or SAP no. is 1114381o and the serial number is HT433332. The spare part number is 363927. Please check that this spare part number matches the one you need. If there is a discrepancy, we unfortunately cannot guarantee the correct functionality of the turbocharger for your specific application. However, we are able to make the necessary adjustments to modify the turbocharger for your specific needs. The TPS57E01 model has a rated speed of 40200 rpm and is cooled by oil. The year of manufacture and the nominal power in kW are not available (nv). This turbocharger has an old design with a V-clamp on the exhaust side. As a special offer, we offer a special ...

For sale is a completely overhauled turbocharger from the renowned manufacturer ABB, model TPS57E01. This turbocharger has an operating time of 0 hours since its complete overhaul and is therefore in excellent condition, almost as good as new. The internal reference number or SAP no. is 1114382o and the serial number is HT838533. The spare part number is 300746. We kindly ask you to check that this spare part number matches the one you need. If there is a discrepancy, we unfortunately cannot guarantee the correct functionality of the turbocharger for your specific application. Nevertheless, we are able to make the necessary adjustments to modify the turbocharger for your specific needs. The Model TPS57E01 was manufactured in 2011, has a rated speed of 40200 rpm and is cooled by oil. Please do not hesitate to contact us with any questions or for more information. We look forward ...

Axles: 6 Type: S3Q883-1-1 Load: 3kg Range: 677mm Year of construction: 2004 Condition: used spare parts carrier Accessories: Cable, handheld MCP 4, control, adept CIP 2

Alimak TPL 2000D Transport Platform  Brand ALIMAK HEK Type TPL 2000D Year of construction 2014 Serial number 50229 Weight 1850kg Overall dimension L 1500mm Overall dimension W 3200mm Power connections: 400 V, 50 Hz, 3 Ph.; Nominal power: TP 2x3.8 kW, MH 2x7.6 kW; Nominal current: TP 15.4 A, MH 30.4 A; Connected load: TP 10.8 kVA, MH 21 kVA; Fuse: 32 A Payload (kg) 2000 Number of people max. (including payload) TP Mode 7 Number of people - MH mode 0 Lifting speed (m/min) Operating mode TP 12 Lifting speed (m/min) MH Mode 24 Max. lifting height (bound) 100 m Max. distance (m) 7.5 Max. overhang (m) 4.5 Max. height of 1st guying (m) 6 Mast type triangular 350, tubular steel  More items - new and used - can be found in our shop! International shipping costs on request!

System: Used decanter / centrifuge Manufacturer: Alfa LAval Model: full coat screw centrifuge Type: AVNX 937 (or NX 4550) . No.: 501.8151.1994 B.: 1994 Drum inner diameter: 450 mm L/D = 5/1: Material: Stainless steel

For sale is a completely overhauled turbocharger from the renowned manufacturer ABB, model TPS57E01. This turbocharger has an operating time of 0 hours since its complete overhaul and is therefore in excellent condition, almost as good as new. The internal reference number or SAP no. is 1108217o and the serial number is HT451218. The spare part number is 325766. We kindly ask you to check that this spare part number matches the one you need. If there is a discrepancy, we unfortunately cannot guarantee the correct functionality of the turbocharger for your specific application. Nevertheless, we are able to make the necessary adjustments to modify the turbocharger for your specific needs. The Model TPS57E01 was manufactured in 2002, has a rated speed of 40200 rpm and is cooled by oil. Please do not hesitate to contact us with any questions or for more information. We look forward  ...

For sale is a completely overhauled turbocharger from the renowned manufacturer ABB, model TPS57E01. This turbocharger has an operating time of 0 hours since its complete overhaul and is therefore in excellent condition, almost as good as new. The internal reference number or SAP no. is 1108217o and the serial number is HT453586. The spare part number is 325766. We kindly ask you to check that this spare part number matches the one you need. If there is a discrepancy, we unfortunately cannot guarantee the correct functionality of the turbocharger for your specific application. Nevertheless, we are able to make the necessary adjustments to modify the turbocharger for your specific needs. The TPS57E01 model has a rated speed of 40200 rpm and is cooled by oil. The year of manufacture and the nominal power in kW are not available (nv). Please do not hesitate to contact us with any q ...

For sale is a completely overhauled turbocharger from the renowned manufacturer ABB, model TPS57E01. This turbocharger has an operating time of 0 hours since its complete overhaul and is therefore in excellent condition, almost as good as new. The internal reference number or SAP no. is 1108218o and the serial number is HT453186. The spare part number is 325767. We kindly ask you to check that this spare part number matches the one you need. If there is a discrepancy, we unfortunately cannot guarantee the correct functionality of the turbocharger for your specific application. Nevertheless, we are able to make the necessary adjustments to modify the turbocharger for your specific needs. The Model TPS57E01 was manufactured in 2002, has a rated speed of 40200 rpm and is cooled by oil. The nominal power in kW is not available (nv). Please do not hesitate to contact us with any ques ...

For sale is a completely overhauled turbocharger from the renowned manufacturer ABB, model TPS57E01. This turbocharger has an operating time of 0 hours since its complete overhaul and is therefore in excellent condition, almost as good as new. The internal reference number or SAP no. is 1108218o and the serial number is HT450595. The spare part number is 325767. We kindly ask you to check that this spare part number matches the one you need. If there is a discrepancy, we unfortunately cannot guarantee the correct functionality of the turbocharger for your specific application. Nevertheless, we are able to make the necessary adjustments to modify the turbocharger for your specific needs. The TPS57E01 model has a rated speed of 40200 rpm and is cooled by oil. The nominal power in kW is not available (nv). Please do not hesitate to contact us with any questions or for more informat ...

CNC WORKING CENTER type ALBERTI EDIT 3000 composition : 1. boring unit ( axe X and Y ) , vertical nad horizontal independent mandrins 2. vertical router 3. horizontal router CNC 90 by TPA volt. 380/50

Alimak TPL 2000D Transport Platform  Brand ALIMAK HEK Type TPL 2000D Year of construction 2013 Serial Number 50138 Weight 1900kg Overall dimension L 1500mm Overall dimension W 3200mm Power connections: 400 V, 50 Hz, 3 Ph.; Nominal power: TP 2x3.8 kW, MH 2x7.6 kW; Nominal current: TP 15.4 A, MH 30.4 A; Connected load: TP 10.8 kVA, MH 21 kVA; Fuse: 32 A Payload (kg) 2000 Number of people max. (including payload) TP Mode 7 Number of people - MH mode 0 Lifting speed (m/min) Operating mode TP 12 Lifting speed (m/min) MH Mode 24 Max. lifting height (bound) 100 m Max. distance (m) 7.5 Max. overhang (m) 4.5 Max. height of 1st guying (m) 6 Mast type triangular 350, tubular steel  You can find more transport platforms - new and used - in our shop! International shipping costs on request!

GS14 - used approx. 100 m³ / 100,000 litres double-walled steel tank, heating oil tank, firefighting water tank, water cistern. In good condition, aboveground tank on two mounted steel consoles, storage tank, water tank, former oil tank, steel tank painted in green. capacity: approx. 100 m³ / 100,000 litres material: steel tank, double-walled, DIN6616/2 dimensions: Ø 2.9 m x approx. 15.8 m long weight: approx. 17.0 t manufacturer: Kraemer Apparatebau other: 2 entry shafts Upon request the tank can be repainted for additional charge. The container is used, has been emptied and professionally cleaned inside. According to the age there are traces of use. This steel tank / container can be used as a storage tank for many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask u ...

For sale is a completely overhauled turbocharger from the renowned manufacturer ABB, model RR131-14. This turbocharger has an operating time of 0 hours since its complete overhaul and is therefore in excellent condition, almost as good as new. The internal reference number or SAP no. is 1107605o and the serial number is HT497310. The spare part number is 547404. We kindly ask you to check that this spare part number matches the one you need. If there is a discrepancy, we unfortunately cannot guarantee the correct functionality of the turbocharger for your specific application. Nevertheless, we are able to make the necessary adjustments to modify the turbocharger for your specific needs. The model RR131-14 was manufactured in 2008, has a rated speed of 75000 rpm and is cooled by water. The nominal power in kW is not available (nv). Please note that there is a small damage to the  ...

For sale is a completely overhauled turbocharger from the renowned manufacturer ABB, model RR131-14. This turbocharger has an operating time of 0 hours since its complete overhaul and is therefore in excellent condition, almost as good as new. The internal reference number or SAP no. is 1104951o and the serial number is HT408414. The spare part number is 228455. We kindly ask you to check that this spare part number matches the one you need. If there is a discrepancy, we unfortunately cannot guarantee the correct functionality of the turbocharger for your specific application. Nevertheless, we are able to make the necessary adjustments to modify the turbocharger for your specific needs. The RR131-14 model has a rated speed of 75000 rpm and is cooled by water. The year of manufacture and the nominal power in kW are not available (nv). Please do not hesitate to contact us with any ...

For sale is a completely overhauled turbocharger from the renowned manufacturer ABB, model RR131-14. This turbocharger has an operating time of 0 hours since its complete overhaul and is therefore in excellent condition, almost as good as new. The internal reference number or SAP no. is 1112574o and the serial number is HT456448. The spare part number is 243318. We kindly ask you to check that this spare part number matches the one you need. If there is a discrepancy, we unfortunately cannot guarantee the correct functionality of the turbocharger for your specific application. Nevertheless, we are able to make the necessary adjustments to modify the turbocharger for your specific needs. The RR131-14 model has a rated speed of 75000 rpm and is cooled by water. The year of manufacture and the nominal power in kW are not available (nv). Please do not hesitate to contact us with any ...

Alimak TPL 2000D Transport Platform  Brand ALIMAK HEK Type TPL 2000D Year of construction 2015 Serial number 50386 Weight 1850kg Overall dimension L 1500mm Overall dimension W 3200mm Power connections: 400 V, 50 Hz, 3 Ph.; Nominal power: TP 2x3.8 kW, MH 2x7.6 kW; Nominal current: TP 15.4 A, MH 30.4 A; Connected load: TP 10.8 kVA, MH 21 kVA; Fuse: 32 A Payload (kg) 2000 Number of people max. (including payload) TP Mode 7 Number of people - MH mode 0 Lifting speed (m/min) Operating mode TP 12 Lifting speed (m/min) MH Mode 24 Max. lifting height (bound) 100 m Max. distance (m) 7.5 Max. overhang (m) 4.5 Max. height of 1st guying (m) 6 Mast type triangular 350, tubular steel  You can find more transport platforms - new and used - in our shop! International shipping costs on request!

The fan speed is refurbished, can be supplied as a complete unit.

FOR SALE... FOR SALE ALFA LAVAL MIB 303S 13/33 YOB 2011 AT TURKEY TO WHOM IT MAY CONCERN; WE VE USED ALFA LAVAL MIB 303S 13/33 YOB 2011 AT STOCK READY TO SHIPMENT IF YOU INTEREST PLS LET ME KNOW Capt. Ayhan Ugurluba Best regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 .aliagamarine.com TURKEY

82MW ISO rated combined cycle power plant. The plant’s main equipment is composed of a Rolls Royce Trent 60 DLE Gas Turbine (also known as the SGT-A65), a Nooter/Eriksen HRSG, and a Siemens SST-300 Steam Turbine. These are below; 1. Rolls Royce USA, manufactured Trent 60 (SGT-A65) Gas Turbine Generator Set; · Manufactured in 2016, delivered in August 2017. Never used. · 65.9 MW(e) ISO · 43.8% Gross efficiency / 8,228 kJ/kWh Heat Rate · DLE Dry Low Emissions with ≤ 25 ppmvd at 15% O2 on fuel gas · Cold start to full power in under 10minutes · 50Hz, but easily convertible to 60Hz · Engine still preserved in original shipping container · An aero derivative gas turbine 2. HRSG is licensed by Nooter Eriksen USA; 3. Siemens Steam Turbine Generator SST-300 C2S/C160; · Manufactured in 2016 · Output 15.75MW ISO · Speed 7059 RPM · Admi ...

Technical data: -Clip device -Glass Strip saw blade diameter approx. 300 mm -Pneum.. Material clamping - powered 400 V - Working pressure 7 bar -Air consumption per operation approx. 1.6 L / stroke -with: - Removal - roller conveyor with controlled positioning - level stop 3000 mm -Feed - roller 3000 mm - e - foot switch - regulator - space about B 4200 x H 1700 X 900 mm -Weight approx. 600 kg

The fan speeds are reconditioned, can be supplied as a complete unit, performance data according to customer specifications.

ALMiG Direct 75 Screw Compressor The DIRECT 37 - 315 series is designed in such a way that it can be operated extremely economically in any kW class due to its unique design concept and can thus be used in a variety of ways. These fixed-speed compressors are particularly suitable for use as base-load compressors. Separation system - highest compressed air quality through proven multi-stage separation Air Control P - the intelligence of the compressor; thinks, monitors, documents. There are hardly any limits to communication about the possible connection to it.  Drive system - highly efficient, reliable direct drive Compressor - powerful, excellent efficiency Radiator unit - large radiators for the lowest compressed air outlet temperatures and optimum coolant temperatures System fans - powerful, efficient, powerful Drive motor - robust drive motor designed for reserve ALMiG D ...

ALMiG Gear 132 Screw Compressor The screw compressors of the GEAR series are particularly suitable for very high compressed air requirements.  The maintenance- and service-friendly drive concept of the GEAR compressors includes a robust drive motor with strong power reserves. The highly efficient gearbox works with minimal slip, high operational reliability, is almost loss-free with an efficiency > 98% and protects the drive. In addition, highly efficient separation of the coolant enables a minimum residual oil content of only 2–3 mg/m³. Due to the encapsulated design of the gearbox set, these systems are suitable for use under the toughest operating conditions. Ideal for very high compressed air requirements Robust drive unit with strong power reserves Virtually loss-free concept with efficiency > 98% Maintenance- and service-friendly drive concept  ALMiG Gear 132  Yea ...

Mesh belt for AUMA / Rotocure new and unused Length: 14100mm Width: 2250mm

Sharping machine for endless abrasive belts. The subsequent endless abrasive belts be sloping ground at the various stations. At the last station of the contact cement is then applied.

The fan speeds are reconditioned, can be supplied as a complete unit.

The fan speed is refurbished, can be supplied as a complete unit.

Transformer station transformer engmx

Areva Teleperm XS Control Cabinet Standard body technology For the construction of Teleperm XS systems, Control cabinets of type SC 9422 (2200 x 900 x 400 mm deep), protection class IP30, are used. The cabinet is equipped with cable interceptors with umbrella rail. The cabinet is designed for seismic loads. Cable entry and power supply is generally done from below. In the standard cabinet, the subracks are mounted in the middle area. To the left and right of this are areas for mounting cabinet connection elements and transceivers. Terminals are used to connect peripheral cables. Other connection technologies such as Maxi-Termi-Point are also possible. Field cables are to be shielded with wires twisted in pairs. Buses are implemented inside a cabinet via conventional cables, outside the cabinet via fiber optics. Teleperm XS is suitable for systems with surface earth ...

Label Flexo Printing Machine Max speed 150 m/min Unwinder + E&L web guide Ø 1000 m, max. weight 300 kg Printing units 7, gearing 1/8”CP Between station 1 and 2, there is a turner bar equipped with web guide Max. web width 413 mm Max. print width 407 mm (16”) Printing cylinders 16 x 12,625” (320,662 mm), 16 x 14,125” (358,77m mm) Anilox cylinder 4 x 255 l/cm volume 4,5 cm³/m² 6 x 140 l/cm Lateral register: ± 5 mm Longitudinal adjustment: Unlimited at all printing and die cutting stations, choiceectable from mobile control console, smallest adjustment 0,05 mm. Web inspection : Tecscan web inspection system Drying: Optimized hot air drying Laminating station Station 8 is a laminating station that consists of a foil unwinding unit, where web guiding ensures the foil is directed straight to the adhesive station. Following  ...

Price on request. FCA free loaded in our warehouse. One second hand Siemens Twin AFA 46 condensing steam turbine manufactured in 2009 for sale. turbine: Siemens type: Twin AFA 46 el. power: 3.300 KW running hours: steam consuption: steam inlet pressure: 26 bar inlet steam temperature:400°C manufactured: 2009 generator: AVK powerrating: 4.125 KVA volts: 6.300 volts Hz: 50 Hz price on request: Stromerzeuger-Discount Kürtener Straße 13 D-51465 Bergisch Gladbach Mobile: 0049/1635263546 Telefon: 0049/ 2202 2492256 Fax: 0049 2202 2492257 Email: info@stromerzeuger-discount.de

Brand new compressor wheel and turbine housing For sale is a fully overhauled turbocharger from the renowned manufacturer ABB, model RR131-14. This turbocharger has an operating time of 0 hours since its complete overhaul and is therefore in excellent, quasi-new condition. The internal reference number or SAP no. is 1104951o. The serial number is not available (nv). The spare part number is 228455. We ask you to check that this part number matches the one you need. If there is a discrepancy, we unfortunately cannot guarantee the correct functionality of the turbocharger for your specific application. Nevertheless, we are able to make the necessary adjustments to modify the turbocharger for your specific needs. The RR131-14 model has a nominal speed of 75000 revolutions per minute and is cooled by water. The year of manufacture and the nominal power in kW are not available (nv).  ...

Ladies and gentlemen, We have following oil transformers in stock from years 2006 to 2015 in top condition. SERVICES: 100KVA to 3500KVA VOLTAGE: 6KV to 33 KV to 400 V or 690 V 1000 kva 20/0.4 KV 1250 kva 20/0.4 KV 1600 kva 20/0.4 KV 2000 kva 20/0.4 KV 2300 kva 12/0.4 KV 2300 kva 20/0.4 KV 2500 kva 15/0.4 also 20/0,4KV 22KV 3500 kva 30/0.4 KV 3500 kva 20/0.4 KV Other sizes and voltages also available from 100 KVA kva up to 3,500. All transformers are in mint condition and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery inclusive. Any further questions can be reached Mon to sat 8 am to 10 pm.

Feeder Maber Coater 1 Oven 1st of 10 m and 6 m of coolers and 1 burner New transition system Maber Coater 2 Oven 2nd of 31 m and 6 m of coolers and 3 burners New transitiion system Stacker sizes 1140 x 960 mm.

For sale is a fully overhauled turbocharger from the renowned manufacturer ABB, model RR131-14. This turbocharger has an operating time of 0 hours since its complete overhaul and is therefore in excellent, quasi-new condition. The internal reference number or SAP no. is 1104951o and the serial number is HT468043. The spare part number is 228455. We ask you to check that this part number matches the one you need. If there is a discrepancy, we unfortunately cannot guarantee the correct functionality of the turbocharger for your specific application. Nevertheless, we are able to make the necessary adjustments to modify the turbocharger for your specific needs. The RR131-14 model was manufactured in 2005, has a rated speed of 75000 revolutions per minute and is cooled by water. The nominal power in kW is not available (nv). Please do not hesitate to contact us with any questions or  ...

Manufacturer: ASEPTO GmbH Year of construction: Fully Refurbished2021/2022; overhauled with ne controls and PLC Capacity: up to 6000 l / h (for milk desserts) with APV Gaulin Homogenizer as a high-pressure pump, capacity: 7,000 l / h Complete documentation and controls available

1300 KW KK&K CFR3 G5A tandem condensing steam turbine 40 bar inlet pressure from 1997 with 50.000 running hours in very good working condition for sale. Scope of supply: controlpannel, turbine with generator, documents. turbine: KK&K type: CFR3 G5A el. power: 1300 KW steam inlet pressure: 40 bar manufactured: 1997 generator: AEM type: SE 500 M4 powerrating: 1830 KVA volts: 400 volts Hz: 50 Hz price on request: Stromerzeuger-Discount.com Kürtener Straße 13 D-51465 Bergisch Gladbach Mobile: 00491635263546 Telefon: 0049 2202 2492256 Fax: 0049 2202 2492257 Email: info@stromerzeuger-discount.de

different Stapling and stitching machines Agrafix - Hohner - Berhmer - Grapha, in good condition, available immediately

Riveting machine (2 heads) Arno Model 105 Year 1980 Head distance 30 - 450 mm Available direct

Vibrorinne MATEC vibrating mesh drive 4 4 kW, 3 x 400 V 50 Hz Pan nominal width 600 mm Gutter inner width 500 mm Trough depth 260 mm Extra deep OK built channel 480 mm Gutter length approx. 11'000 mm Transport speed nominal approx. 17 m / min Year 2018 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Reinbacker- rope turning lathe chuck up your part- twin routers transverse your material as lathe slowly rotates your material several passes give you a straight or tapered spiral like a rope turning or straight or spiral flutes

Used Kiener Skinetta ASK 450 Overwrap / bundle machine Manufacturer: Kiener Skinetta GmbH ( Germany ) Type: ASK 450 Year: -83 / -89 Control panel Multi-tier Speed: up to 25 cycles / min. Leaflet feeding unit Infeed conveyor: 1200 mm x 180 mm Steel rod conveyor 1000 mm x 450 mm Film width: 40 - 450 mm Film material: PE,PP Sealing width: max 450 mm Sealing height: max 290 mm Power: 380 v., 5 kW Air: 6 bar Heat blower 4 pcs Overall dimensions: 1300 mm x 110 mm x 1900 mm Weight: 300 kg

Stock# U2310 Used stainless steel two-stage piston homogenizer manufactured by Tetra Pak (Sweden) model Tetra Alex 20. Capacity up to 5000 l/h at 160 bar pressure. Number of pistons: 3. Piston diameter: 50 mm. Piston material: stainless steel. Main drive: ABB electric motor 30 kW, 400 V, 50 Hz, 1475 rpm, IP55. Hydraulic drive: 0.25 kW, 400 V, 50 Hz, 1410 rpm, IP55. Cooling water requirements: 130 l/h. Stainless steel covers included. Weight: 1355 kg.

Control Fanuc ... i Series Turning diameter ... 600mm Turning length ... 330mm Inclined bed Spindle bore ... 61mm Turret Circumferential diameter over bed ... 600mm Circumferential diameter via support ... 400mm Axis X ... 205mm Axis Z ... 340mm Rapid traverse of the X axis ... 30m/min Rapid traverse of the Z axis ... 36m/min Spin speed... 0-6000 rpm. Max. spindle torque ... 127Nm Main engine power ... 11/15kW Doosan Robot Cell Assembly: 2x LYNX 2100A + ROBOTEC APC7 (Fanuc AM-100 iC6L) - The machines are supplied with chucks and pliers - High pressure cooling 20bar - Arm for picking up workpieces (Ø65 x L130 mm, weight 3 kg) - Automatic door opening - Spindle bladders for cleaning the clamping jaws - Oil separator - OIL SKIMMER - Tool Load Monitor (works with X-, Z-axis and S-spindle) - Workpiece conveyor The machine is in good condition, possible to test un ...

New water jet cutting machine Make: aps Type: 3D 5-axis 301508 Little hours Conversion to pure water operation possible Year: new -Latest generation of control -Latest servo drives -Latest CAD-CAM software -Latest high pressure pump 22 kW -Latest Abrasivausrüstung with cutting head, Abrasivdosierer and storage containers Work area: L: 3000 mm x B: 1500 mm x H: 800 mm Dimensions: L: approx. 5000 mm, B: approx. 3500 mm, H: approx. 3200 mm Z-axis: optional with collision protection Cutting speed: up to 10 m / min. Positioning accuracy: ± 0.1 mm (500 mm travel) Repeatability: ± 0.05 mm Die heads: 1 x Abrasivschneiden or 1 x pure water cutting Electrical connection: 3 x 400 V, 50/60 Hz.; 35 A slow Compressed air connection: approx. 20 NL/min at 6 bar Water connection: depending on the used high pressure pump High pressure pump: 22 kW Pres ...

New water jet cutting machine Manufacturer: aps Type: Jetcut integral 2030 Little hours Conversion to pure water operation possible Year: new -Latest generation of control -Latest servo drives -New high pressure pump 22 kW -New Abrasivausrüstung cutting head, Abrasivdosierer and reservoir workspace: 2000 mm x 3000 mm Dimensions: L: approx. 4600 mm, B: approx. 2900 mm, H: approx. 1500 mm Z-axis: 180 mm, full servo axis, optionally with collision protection Cutting speed: up to 15 m / min. Positioning accuracy: ± 0.1 mm Repeatability: ± 0.05 mm Die heads: 1 x Abrasivschneiden or 1 x pure water cutting Electrical connection: 3 x 400 V, 50/60 Hz.; 35 A slow Compressed air connection: approx. 20 NL/min at 6 bar Water connection: depending on the used high pressure pump High pressure pump: 22 kW Pressure: depending on the used high pressure pu ...

AGIE AGIECUT CLASSIC 2S wire EDM machine built in 2004 in Switzerland is used for the production of, among others, precision dies, tools and punches. Workpieces with a maximum weight of 450 kg are machined using electrical erosion, which can achieve complex shapes in even the hardest materials. This process is performed in a dielectric-filled work tank using a wire with a maximum diameter of 0.33 mm, which is threaded through a special AGIEJET system. The workpieces machined in this way do not require any other secondary processes such as polishing to be undertaken. The AGIECUT CLASSIC V2 wire EDM machine also features an intuitive CNC control with many useful functions. It is possible to purchase the dedicated cooler shown in the photos at an additional cost – price negotiable. The AGIE EDM machine weighs 2580 kg. Technical specifications of the AGIE AGIECUT CLASSIC 2S EDM machi ...

ALEXANDERWERK ROLLER COMPACTOR, MODEL WP 120 Year of construction: 2016 The WP 120 Pharma was specially designed by Alexanderwerk for use in pharmaceutical research and development areas. Designed as a mobile unit, meets the demand for mobility and flexibility in R&D and pilot plant. The control system and the operating unit are integrated in the machine. Process parameters determined for a later production scale can be easily transferred to larger machines. Due to its modular design, the process technology of the WP 120 Pharma can be completely disassembled without special tools; the modular design also guarantees fast changing and cleaning of all working tools and meets the requirements for flexible production. Machinery size Weight (incl. control system): approx. 825 kg Dimensions (HxWxD): approx. 1,635 mm x 1,450 mm x 924 mm Production Minimum product quantities:  ...

Screw cylinder 90 mm