a f used for sale

3 Qty.1 Second-hand Tube Expander Unit Built: 2012 Model: ABO Tube diameter: 500 mm-2540 mm

Machine name: Paddle dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Year of construction: 2002 Speed: 107 rpm Material: Stainless steel Drive motor: 5.5 KW Version: EExdellCT4 Total capacity: 235 liters Wetted parts: stainless steel 1.4571 Gearbox:Helical gear motor Equipment: Double jacket, mechanical seal, wave heating Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Tech. Documentation: yes available Note: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame, Maierkopf HWR 225 Condition: Used very good Price: on request

1 ALLIANCE sample high temperature jet dyeing machine, type Colora HT10 capacity 4 to 10 kg (according to the weight and composition of the fabrics)  year 1999 maximum dyeing temperature 140 ºC machine equipped with filter COMEUREG Microprog 40 dye cycle controller winch is ABB inverter controlled circulation pump is ABB inverter controlled with addition vat machine has worked very few hours and is in pristine condition

Safetech ST-Alarm-V2 Safety Weighing Cabin The latest generation of safety weighing cabins, the ST1 series, stands out characterized by an optimized design, especially with regard to personal protection for Working with toxic and active substances. All cabins are equipped with an alarm system and two alarm sensors. The sensors measure the flow velocity on the right and left side of the working opening. As soon as the flow velocity falls below a limit value, both an audible and a visual alarm are triggered. The key advantages at a glance: Unique directional airflow guidance through BAFFLE technology (patent pending) Virtually turbulence-free balance environment Suitable for the latest generation of microbalances Cabin design also enables pipette handling Alarm system with two sensors and data recording Vibration-free due to independent filter unit Easy to cle ...

Type: LABELING MACHINE Applicable industries: production facilities, food and beverage factories, retail, others Packaging type: box, bag, bag on any flat surface Packaging material: plastic, paper, metal, glass, wood Automatic Quality: Automatic DrivenType: Electric Voltage: 220 V/50 Hz weight: 84 KG Key selling points: Easy to use Core components: PLC, pressure vessel, gearbox, motor, motor, bearing, gearbox, pump Marking accuracy: ±1 mm Labeling Speed: Standard Model: 30~60pcs/min Outer diameter of the label roll: 300 mm Inner diameter of the label roll: 76 mm Machine Material: Aluminum Alloy, Iron

FOR SALE... NEW ORIGINAL ABB VTR 254 BEARINGS 34100-32100 SETS AT TURKEY... TO WHOM IT MAY CONCERN; --WE VE NEW UNUSED ORIGINAL 11 SETS ABB VTR 254 BEARINGS 34100 & 34200 AT OUR STOCK. --BESIDES WE VE 9 SETS SPARE PARTS HZTL 431301R1 AT OUR STOCK AT SPECIAL WOODEN BOXES. PLS FIND DETAILED LIST ON PICTURES ALL PARTS READY TO TRANSPORT. IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Injection pump from a Liebherr excavator Operating hours approx. 2,000 hrs pump was upgraded to electric Storage device is replaced. Pump is fully functional Special price

Post driven tools from a Traub CNC lathe VDI 40 As well as some measuring geraete for Traub Rest according to photos Special price

Additional options New/unused EPA marked Yes Engine Mitsubishi S12R-PTA 1425 kVA generator power Generator Mecc Alte ECO43-2LN/ CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 13,170 kg Dimensions (Lxwxh) 750x230x250 m Country of production Netherlands Additional Tank, Battery, Control Panel Other information

Digital charging grate 24Volt 140 Ampere! Very strong charging for large batteries! Charging for forklift battery suitable for 12 cells 24 Volt 140 Ampere good condition More used loaders 24Volt, 48Volt, 80 Volt from 55 amperes to 200 amperes at the camp, please ask. Special price

colstress holder SK50 with inner suit thread In a suitcase with collets according to photos Special price Lid Hermle Weiler Meuser Kunzmann Wanderer Ruhla Weipert Wohlenberg

Praezision clamping tool Kombi plug-on pins BestNo. 1052-018 2 stub SK60x40x27 Unused and ovp 1 x as good condition Only against bid! Special price

1 Post Saegeblaetter (8 Stueck) for Kaltenbach All Saegeblaetter either re-ground or Unused. 1 square diameter 560mm 5 stub diameter 500mm 2 square diameter 400mm Hole in the middle 50mm

AMOT valve, 6 units, unused

A C H T U N G_____S o n d e r p r e i s ! ! ! TIG Welding Device Manufacturer Artec fully ready for use with all the no-fable lifts. Can also be used as an electrode device. Welding current 350 ampere DC, no alternating current! Weight approx. 200kg Geraet under electricity ready for use Immediately available Lorch Dalex Messergrießheim Cloos Special price

Three T-slot plates of a copy-fraes machine from Lid are offered. The T-slot plates can be mounted as a cross table. Scope of delivery only according to photos, without spindles. If you are interested, please request more photos. Further spare parts of lide e.g. towing table of a KF3 pre-wheels. Please ask. Special price Lid cabinet tool cabinet

Hydraulic bottles Jack stamping trolley lifter for trucks and commercial vehicles. Manufacturer Weber Hydraulics Lifting capacity 20to Building height 240mm Lifting distance 155 mm Threaded length 110 mm Total length extended and thread turned out 505 mm Diameter piston rod 60 mm Unused lifter from Bundeswehr bestaenden, without oil filling and without pump ingestion rod. 12 stueck available, price per piece. Special price

SULAK BTS 01 ALPHA glass beveling machine was manufactured in 2014 in the Czech Republic. The easy-to-use glass grinding machine is designed for levelling and grinding flat or rounded edges of, among others, glass and mirrors. The machining of workpieces with a thickness of 3 to 12 mm is performed with water cooled diamond discs and polishing discs. Depending on the design of the diamond disc, the processed glass edges can have a trapezoidal profile, a flat profile or a C profile. The total weight of the machine is 280 kg. Technical data of the SULAK BTS 01 ALPHA glass edging machine - minimum glass size (L x W): 200 x 200 mm - maximum glass thickness: 12 mm - minimum glass thickness: 3 mm - spindle speed: 2800 rpm - number of spindles: 1 - power supply: 3x 400 V; 50 Hz - power: 1.6 kW - dimensions (L x W x H): 3060 x 750 x 1700 mm - BTS 01 ALPHA machine weight: 280 kg

Brettbesäumer Autojet used Cutting heights 18 - 100 mm, 3 variable axes – 2 variable stems – Re./Li. Additional bushing. Build 3/94 - New laser measurement with PC/software/PC cabinet from Installation 5/2007 A cost-effective solution for a fast trimming machine with modern laser measurement. - Continuous capping with length stops for the cap lengths - Zero cross-cut saw - Addition of swivel saw for tip capping on the opposite side. The waste is disposed of. -Transverse measuring conveyor The boards are conveyed by a measurement curtain in transverse passage. -Laser measurement State-of-the-art surveying with 15 lasers from above. Of course, programs can be stored in all variety, depending on length and width, separation, sharp-edged or forest edge can be mapped in many ways in the program. - Alignment table A computer calculates the ideal orientation of the boa ...

Additional options New/unused EPA marked Yes Engine Mitsubishi S16R-PTA2 2100 kVA generator power Generator Mecc Alte ECO46-1 l/4 CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 20,100 kg Dimensions (Lxwxh) 900x280x348 m Country of production Netherlands Additional Tank, Battery, Control Panel Other information Available with soundproof canopy as well.

Additional options New/unused EPA marked Yes Engine Mitsubishi S16R-PTAA 2250 kVA generator power Generator Mecc Alte ECO46-1 l/4 CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 21,100 kg Dimensions (Lxwxh) 900x280x348 m Country of production Netherlands Additional Tank, Battery, Control Panel

Additional options New/unused EPA marked Yes Engine Mitsubishi S16R2PTAW Generator power 2500 kVA Generator Mecc Alte ECO46-1.5 L CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 21,300 kg Dimensions (Lxwxh) 900x280x348 m Country of production Netherlands Additional Tank, Battery, Control Panel

FOR SALE NEW UNUSED 4 PCS ALFA LAVAL HEAT PAC EHM 40KW TO WHOM IT MAY CONCERN ; WE VE 4 PCS-NEW UNUSED ALFA LAVAL HEATPAC EHM 40KW AT OUR STOCK. HEATPAC IS 440V YOB 2013 PLS FIND SPECT AT PICTURES IF YOU'VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

CLIMAVENETA AWR-MTD2-XE.0031MS Brand:CLIMAVENETA Type:AWR-MTD2-XE.0031MS Stock number:M23-4626 Cooling capacity:9.2 kW Application:Cooling / Heating Number of fans:2 Refrigerant:R410A Refrigerant Content:3,5 kg Voltage:220 Volts Power consumption:5,19 kW Dimensions:900 x 420 x 1240 mm Weight:155 kg Year: New/unused Number in stock:3 piece(s) Price:Quotation request Description: New unused air-cooled Climaveneta water chiller/heat pump with a scroll compressor, water pump and expansion vessel. This machine is equipped with a separate control unit. Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. (Heating: Q= 12,3kW at +40/45°C and +7°C). Visit our website: used-refrigeration

Features and advantages of the classifier mill ACM: • Grinding and classifying in one machine. • Excellent selectivity, steep particle size distribution. • Infinitely adjustable fineness. • Flow-optimized, conical classifier wheel guarantees product without oversize grain and low wear compared to cylindrical classifier wheels. • Cool and gentle grinding due to high air flow. This makes the ACM ideal for processing temperature-sensitive products. • Deflection area in the grinding chamber lid: classifier gap flushing not required. • Low noise emission. • Very good running characteristics due to the belt-driven grinding disc. Bzc3pyxj32 • Easy to maintain: motors and bearings easily accessible. • The lid lifting device allows quick access to the grinding and viewing zone for cleaning and retrofitting. • Extremely compact and space-saving design. • Option ...

NOE Alu L A lightweight system that can be used to work independently of the crane. The NOEalu L convinces as a real hand formwork, due to its low weight, high flexibility and durability. The low weight of 21 kg/m² Ensures long-term productive Work, even without a crane. The sturdy construction will meet the to cope with the stresses of everyday construction site life. Flexible thanks to a wide, Vertical or horizontal table assortment. The Alulock connects the various components of the system as reliable as it is escaped. The individual panels allow a concrete pressure of up to up to 60 kN /m². NOE Alu L A lightweight system, for work without crane. The NOEalu L convinces as an Hand formwork, due to low weight, high flexibility and durability at the same time. The low weight of 21 kg/m² ensures a permanently productive work, even without a crane ...

The AMTEC VERTIwrap is a sorting module weight tester. Width 220 mm, weight range 5-999 g e = 1, 5 g. The machine is available and can be viewed like in Meersburg, Baden-Württemberg.

Mower containers and mulchers Working width 1.50 m, 3-point attachment cat. I/II, for PTO 540 rpm. Capacity approx. 2500 ltr. Equipment: Height-adjustable front wheels, support roller, height-adjustable rear landing gear. (3 hydraulic connections required (dw/ew). Lighting system according to StVZO. For mowing and/or scarifying (scarifying knife optional required) of grassy areas. The mown material - including horse droppings and leaves - can be picked up and then transported away at the same time. Required tractor power: 26 kw / 35 hp. High stability during the tipping process and problem-free road transport due to rear landing gear. Emptying height max. approx. 2.20 m (factory specifications). Age-related wear and tear and paint defects/rust present, but still operational. Alternatively, we also offer Reiser mowing containers with a working width of 1.30 or 1.50 m as well as a W ...

Size max 320 x 250 mm min 160 x 120 mm Pile height 50 mm Infeed height max 850 mm min 350 mm Speed max 50-100 m/min ; working condition

CANON OCÉ ARIZONA 460XT large format printer built in Canada in 2013, is designed to provide the user with near photographic quality of prints with excellent text clarity. To make this possible, the CANON inkjet printer uses a piezoelectric method, during which special crystals change their shape and volume under tension and pressure on a membrane, and then splash under high pressure onto the printed surface. The use of this technology results in excellent image sharpness, density and uniformity, both while printing on a roll media and on a flat substrate. The OCÉ ARIZONA 460XT UV flatbed printer has an extra large work table with a vacuum system, with which oversized media with a maximum size (L x W) of 3060 x 2510 mm are held stationary to ensure accurate registration of multiple prints. Printing of large-format media uses a piezo head configured for CMYK + WHITE colour support, w ...

Line boring machine Ayen with 32 mm grid Bahvy3bjt2 with attacks Pneum.. Holders Motor 0.55 kW L x W x H: 250 x 80 x 200 cm Weight 420 kg Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Qty. 1 Second-hand bar and wire rod production plant Mfc.: Sarralle, Danieli, ABB, Indar Built: 1990’s, 2000, 2005, 2007, 2010 Revamped: 2008 Capacity: 1,100,000 T/annum Entry material: Scrape Semi product: Billets Size: 130x130 mm or 140x140 mm Length: 8 – 13 m Reinforced Bars: Dia.: 8 - 40 mm Length: 6 – 12 m Rebars: Dia.: 8 - 16 mm ID: 850 mm OD: 1100 – 1250 mm Height: 800 mm Wire Rod: Dia.: 5.5 – 14 mm Scope of supply: Scrap Transportation Machines EAF Ladles Furnace Continuous Caster Billet Reheating Furnace 23 Rolling Mills (Dia. 8-10 mm) 21 Rolling Mills (Dia. 12-32 mm) Wire Rod Mill Flying Shears (2) Spooler Line Cooling beds (2) Cranes Transformes Spare Parts

Cake cutting table for trays 400x600mm universal tray lock ruler cake cutting templates Pneumatic knife PM10 works on compressed air 2 types of blades

P74 - used appr. 18 m³ / 18,000 litres polyester tank / GRP-tank, aboveground, on 3 steel bases, in good condition. volume: appr. 18 m³ / 18,000 litres material: polyester / GRP length: appr. 5.80 m height: appr. 2.40 m total diameter: appr. Ø 2.00 m Aboveground storage tank, round shape, resting horizontally on 3 steel bases, dome on the front side, several in- and outlets. The container can be used as a storage tank for many different media such as water, liquid food, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as a rainwater collection tank etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold b ...

We offer a retractable gravity conveyor for sale. It has minimum dimensions 2218 mm 8735 mm max. Width 760mm Technical data: Length retracted: 2218 mm Length extended: 8735 mm Width: 760mm Height: adjustable from 730-1040mm Rows of rollers: 67 units maximum load capacity: 400kg / M Net price: â?¬2295 / piece Number available: 12 pieces

We offer a retractable gravity conveyor for sale. It has minimum dimensions 2218 mm 8735 mm max. Width 610mm Technical data: Length retracted: 2218 mm Length extended: 8735 mm Width: 610mm Height: adjustable from 730-1040mm Rows of rollers: 67 units maximum load capacity: 400kg / M Net price: â?¬2050 / piece

Siebmaschine, Fabr. AZO, Type M 425