a f used for sale

BITZER / ALFA LAVAL L7SW1S12PP Product number:M19-4335 Cooling capacity:930 kW Refrigerant:NH3/R717 Refrigerant Content:80 kg Voltage:400 Volt Motor power:250 kW Dimensions:9.000x3.000x2.600 mm Weight:13.500 kg Year:2014 Number in stock:2 piece(s) Price:Quotation request Very nice and young Bitzer water-cooled ammonia water chiller(s) built in a machine-room container with mechanical cooling. This Bitzer chiller consists of a frequency controlled Bitzer screw compressor (brand Danfoss), WEG electric motor 250 kW, horizontal oil separator, oil cooler, combined economiser/liquid separator, Alfa Laval plate heat exchanger evaporator, Alfa Laval plate heat exchanger condenser, Grundfos speed controlled pumps and a control cabinet with Siemens PLC and touch screen. The above mentioned capacity is at +18/12°C in/out and a flow rate of 143,7 m3/h. and a cooling water supply +4 ...

We´re offereing successfully since many years twin-screw compounding extruders >> NEW segmented screws and cylinders, LD ratio due to your request Side-feeders, vacuum ports and accessories Please contact us for further information

new compoundng extruders

System: pressure booster pump needed Manufacturer: Allweiler Type: LV 50/4 / diameter. 170 Model: U2. 6 d-W1 Year of construction: 1999 Flow rate: 40 m, m³/h H: 154 m n: 2900 1/min P: 26 kW

Sell used hydraulic power units 5. 3 with 11 kW electric motor- 2 with 4 kW electric motor- Price per PCs. Motors from ASEA Sweden

System: Used piston - diaphragm pump Manufacturer: Abel Type: HMD-G-20-0125 Year of construction: 2001 Series: HM Machine number: 5100074 Material: GG Capacity: 18 m m³/h Delivery pressure: 15 bar Speed: 131 U/min Temp: MAX 100 ° C Operating voltage: 380 V Frequency range: 50 Hz Motor: 11 kW Protection class: IP55 Flanges: DN 80 Dimensions: 1.70m L x 1.30m W x 1.60m H Miscellaneous: forced ventilation 230/400V, 0.11 kW

AGFA ADC Compact with: Readout unit/ID tablet Workstation complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient use.

Oil drip pan 1080 litres Oil collecting tray with feet made according to RAL RG 616, content 1080 litre, material S235JRG2, painted,. Dimensions: Height 750 mm, length 1200 mm, Width: 1200 mm incl. test certificate Year 2012, unused

ABB electric motor System: electric motor Condition: pre-owned Manufacturer: ABB Product code: 3GJP181410-ADG Year of construction: 2008 IP: 55 KW: 22 Speed: 2938/RPM HZ: 50 Weight: 200 kg

Weibert WJ-ASA Professional Extraction system Power of the motor: 4 KW Suction power: 3900 m, m³/h Chip bags: 2 x 200 l Dimensions 580 x L. B. 1300 x h 2200 mm Driving device Connector 2 x 120 mm WJ-ASA Professional Special price: NET 890,-

<b>Features:</b> Used pallet roller conveyor from Pack & Roll GmbH Fuesse to order separately Geraeuscharm Condition: fully functional with traces of use Ideal for fast material transport Professionally dismantled and packaged Color: Silver Drive: Gravity Total 14.58m plug available <b>Technical data: </b> Dimensions of the roller conveyor Total quantity in stock: approx.: 14.580mm Length per segment: 3645mm Total width: 1150mm One brake roller is available per segment Diameter of brake roller: 90mm <b>Details of the role</b> Clamping length: 1055mm Diameter approx.: 60mm Axis distance: 130mm, adjustable Material: steel, galvanized <b>Information on the framework</b> Height: 80mm Width: 40mm <b>Pallet roller conveyor</b> The roller conveyor is ideal in the picking zone for int ...

The blowers are fully incorporated into a soundproof cover with base frame, safety valve, check valve and mounting parts. The motor can be installed according to customer specifications. The stage will be overhauled on request.

2,57:1

2,91:1

Attachment: eccentric screw pump used Manufacturer: Allweiler Series: AED 1E 4250 Year of construction: 2000 Working temp.: approx. 20 ° C Viscosity at tA: approx. 500 mpa.s Density at tA: approx. 1.0 kg / m³ Pressure in the pressure connection: 2-6 bar Speed: 62-310 1/min Flow rate: 30-180 m, m³/h Engine capacity: 45.0 kW

Agfa Aphis Board for new PCI. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don`t hasitate to contact us. Still in operation: No Available: Ja

Spinner für Agfa Avantra 30 ,30.000 RPM, refrushed 2012, with waranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don`t hasitate to contact us. Available: Ja

Spinner für Agfa Avantra 30 ,30.000 RPM, refrushed 2012, with waranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don`t hasitate to contact us. Available: Ja

Used parts ex ISEKI TG 5390 AHL. 28 kw/40 hp turbo diesel, hydrostat drive 3-stage, 4-wheel drive, front power lifter, cabin, lawn tyres. Info and offers on request. We do not send package deals, lists and do not respond to anonymous messages - please give full name and place of residence as well as tel. no. for inquiries. For viewing appointment sat is required! ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

<br>Spinner for Agfa Avantra 44s, 20,000 RPM, refurbihed 2013, with warranty. We have all spareparts for Agfa Avantra 25/30/44, AccuSet... on stock. Don't hasitate to contact US.<br><br><br>

<br><br><br>Still in operation: Yes<br>Available: immediately

1 of used swing-top bottling line. Originally used for filling beer (2°C) in 330 ml printed/sleeved glass bottles (D 60 mm x H 230 mm) with swing-top closures, at a speed of ± 1.900 bph. Additional size-parts included for 500, 750 und 1.000 ml bottles. Last used for bottling liquors. Wired for 415V/50Hz. Line hardly used and hence in excellent condition! Line consists of:Bottle feed table with 5 rows of stainless steel slat, stainless frame, with inliner and variable speed drive, new 2006. 1 lot interconnecting empty- and full bottle conveyors, stainless steel slat and frame, new 2006. 1 rinser/filler monobloc, make Cime Careddu (Italy), type DPS 9-8, new 2006, 9-head rotary rinser, no-bottle/no-spray, 8-head rotary counter-pressure filler with double pre-vac (built-in vacuum pump), height adjustable min/max 180 – 350 mm, diameter min/max 50 – 90 mm, CIP to drain, with Telemecaniq ...

8-color web width 342,6 mm 9 print clambs, 8 for water colour 1 UV glue clambs for packing-Monofolie up 30µ for printing of pressure-sensitive label material bis 200µ Ceramik-Aniloxcylinder, for 120/18 bis 140/10 140/17, 160/15, 180/12, 95/15, 200/5, 255/10, 300/10, 315/11, 345/8, 500/17 Inking roller for full-size inking with cutting for slitting etc. Still in operation: Yes Available: sofort

AGFA Avantra 30 with short Developer in great condition. Resolution: 1200, 1800, 2400 and 3600 dpi - max. image area: 75,4 x 63,5 cm. Available: now

AGFA Motor for the cutter of SelectSet 5000. Including Belt. Available: now

AGFA Cutter for SelectSet 5000. Including Belt, Stillage and Knife. Available: now

AGFA AccuSet 800 in great condition with Agfa Viper Rip, Resolution: 1200, 1800 and 2400 dpi - System includes all componentes: Accuset, Supply- & Takeup-Cassette, Apis-Cable, CDs, Software and Dongle. Including Techkon Densitometer for film. Just send us a mail and you will get more info and photos Available: now

AGFA Laser for SelectSet 5000 including PowerSupply. The Laser is tested and working - see picture. We can send you the original picture in high resolution where you can see clearly the Laser running. Available: now

AGFA Laser for SelectSet 5000. The Laser is tested and working - see picture. We can send you the original picture in high resolution where you can see clearly the Laser running. Available: now

Complete System - still in production - Avantra 44 with 3600 dpi - AgfaLine 44 - short Online Processor - Agfa PDF-Rip - Agfa PrintDrive Series 3 Available: after 10.07.2011

Motor for Avantra25 - see all details in the picture. The Motor is out of a well working Avantra25. Available: on stock

Motor for Avantra25 - see all details in the picture. The Motor is out of a well working Avantra25. Available: on stock

Cooling Unit for Avantra25 - see all details in the picture. The Unit is out of a well working Avantra25. Available: on stock

- agregat card ARB 425 - analog output card ARB ARB 390 - output card ARB 409 - base board card SN. 193170 + SN 143537 ARB 729 + SN 173858 - panel card ARB 256, ARB 414 - control card ARB 692 - CPU card ARB 726, ARB 251 - diagnose card ARB 389 - disk controller card ARB 500 - input card ARB 254, ARB 705 - injection control card ARB 460, ARB 328, - elektronic card ARB 252, ARB 255, ARB 380 - inside press card ARB 259 - base board card ARB 372, ARB 523 - motor control card ARB 307, ARB 440 - 24V card ARB 381 - proporcional valve card 0 811 405 047, ARB 330 - memo card ARB 339, ARB 508, ARB 526 - heating control card ARB 365, ARB 404, ARB 530 ARB 640, ARB 730, yPIII - distributor card ARB 511, ARB 534, ARB 538, ARB 539 - video card ARB 258, ARB 535 - amplifier card, modul card - rectifier - transducer card ARB 302, ARB 399, ARB 733 - power supply Deutronic ED-60 -  ...

Transport Motor for Avantra25 - see all details in the picture. The Motor is out of a well working Avantra25. Available: on stock

Supply-Cassette for Avantra25 - see all details in the picture. The Cassette is out of a well working Avantra25. Available: on stock

Takeup-Cassette for Avantra25 - see all details in the picture. The Cassette is out of a well working Avantra25. Available: on stock

Panel for Avantra25 - see all details in the picture. The Panel is out of a well working Avantra25. Available: on stock

Laserset for ProSet9400 - see all details in the picture. The Lasers are out of a well working ProSet. Available: on stock

Powersupply for AccuSet - see all details in the picture. The Powersupply is tested and is out of a well working AccuSet. Available: on stock

hydraulic internal clearing machine in good operational condition Clearing stroke:1.500mm Tension: 16,000 KG â?¢ the drawing head shot in the drawbridge:85mm Through-hole in the clamping table: 120mm Workpiece diameter: max. 750mm (due to the machine body of the tool feeder) Cutting speed: hydraulically infinitely adjustable from 1 m/min to 6m/min Return speed: hydraulically infinitely adjustable from 5m/min to 30m/min Dimensions of the machine: (bx t x h) approx. 6,600 mm x 800 mm x 1,500mm (without working area) Power supply / connection power: 380Volt 50 HZ /8.0 KW Accessories / Optional equipment: â?¢ the machine has an electrical control for clearing lifting movement â?¢ the machine has an integrated cooling cutting system â?¢ the machine has a flanged machine bed with a manual tool feeder The machine is ideal for the produ ...

Very good metal separator / metal separator for the separation of all metals (including stainless steel, VA) from a material flow. Can be used before or after a NO-ne ate separator (eddy current separator) or as a stand-alone machine. Separation of all metals from approx. 1 mm grain size. Meaningful use for metal contents up to 60% metal content. Unique flap technology (flipper), no compressed air required. The machine is immediately ready for operation, can be inspected and tested. On request also with camera! If the machine is too small, we build it larger. This is our demo machine. Maximum throughput depends on the material and purpose. Price matter of negotiation!

Takeup-Cassette for all AccuSets - see all details in the picture. The Cassette is tested and is out of a well working AccuSet. Available: on stock

Output-Motor for AccuSet, the Motor is located before the TakeupCassette - see all details in the picture. The Motor is tested and is out of a well working AccuSet. Available: on stock

Supply-Cassette for all AccuSets - see all details in the picture. The Cassette is tested and is out of a well working AccuSet. Available: on stock

M. No.: 2277

PUR bag melter for processing from 2 to 3 kg PUR-DIN aluminium foil bags, Technical description: Hose connections, temperature controller PT100, 2 internal heating circuits, storage tank approx. 2.8 kg volume for bag change, 1 gear pump 7.3 cc drive via three-phase motor, glue stop shut-off direction, level monitoring for the Bag change with optical and acoustic signal, electronic Control with larsicht input (multilingual), weekly timer, digital inputs and outputs for integration to the mother machine, melting capacity adhesive-dependent, temperature reduction, Operating voltage 400 V Including - Hot glue hose length 3.5m i.D.10mm - Application head large glue outlet 5.6mm probe Pt100 - Homag cover plate QA65 with hose aging re - Switching amplifiers - Teflon probe S-506

Supply-Motor for AccuSet, it is the complete unit for an easy change - see all details in the picture. The Motor is tested and is out of a well working AccuSet. Available: on stock

Cutter for AccuSet - see all details in the picture. The Cutter is tested and is out of a well working AccuSet. Available: on stock