a f used for sale

Thermostat, sensor -Adjustment range: -10...+12 -Weight: 0.7 kg

Thermostat, sensor -Adjustment range: -10...+12 -Number: 2x available -Price: per piece -Weight: 0.7 kg

Allweiler feed pump type SNF 280 ER46U4-W33 in new condition for sale. Technical data can be found in the attached data sheet.

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Power: 0.55 kW -Input: 200-240 V 50/60 Hz 7.4 A -Output: 0-240 V 0-400 Hz 3 A 1.1 kVA -Number: 2x available -Price: per piece -Dimensions: 126/68/H140 mm -Weight: 0.8 kg

Airpower Europe APD 060 090 F05/F07-V14-H MD 7Nm/bar Pneumatic swivel actuator double-acting Valve monitor - Feedback box Model LSB 02-M2 IP 67 230 V Outer D 185 mm Inside D 155 mm Thickness 4 cm Outer steel

Respiratory protection filter -Clean AIR: basic 2000 -P SL R Art. No.: 80 00 10 -Price: per piece -Number: 17 pieces -Dimensions: Ø 131/54 mm -Weight: 0.1 kg/piece

AVK rotating frequency converter 50 to 60 Hz with AVK generator DKBN120K/490-12TS and AVK motor DKMBN 120L/400-10TS for sale used in working condition. You can also purchase only the generator or engine (on request). Frequency converter from 1986, complete with motor (50 Hz) and generator (60 Hz). Motor: 345 kW x 1,500 rpm, 400 V/50 Hz Generator: 400 kVA x 1,500 rpm, 380 V/60Hz Year of construction: 1986 Weight [kg]: 7.952 Dimensions LxWxH [cm]: 475x110x160 Generator AVK DKBN120K/490-12TS Manafacture: AVK Model No.: DKBN120K/490-12TS Type: air-cooled AC generator Serial Number: 5639822 Engine DKMBN 120L/400-10TS Manafacture: AVK Model No.: DKMBN 120L/400-10TS Type: AC motor Serial Number: 5639825

The filter press was revised and checked by our workshop in 2023. Machine name: Chamber filter press Manafacture: Passavant Type: AX1200 Year of construction: 1989 / 2023 Design: Bridge spar press Filter pressure: 15 bar Press capacity: Approx. 2200 litres Procedure: Closed Filter area: Approx. 155 m2 Plates format: 1200 x 1200 mm Number of plates: 62 Panel material: Polypropylene Plate transport: Automatic Plate package length: Approx. 4200 mm Cake thickness: 30 mm Dimensions: L 7600 x W 1600 x H 2250 mm Note: Workshop revised in 2022 Accessories: A control cabinet and a hydraulic system Condition: Used good Price: On request

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN50 -Width: 230 mm -Nominal pressure: PN16 -Dimensions: 230/165/H370 mm -Weight: 11.1 kg

Respiratory protection filters -Art. No.: 500 01 67 A2B2-P3 -Price: per piece -Quantity: 8 pieces -Weight: 0.5 kg/piece

Respiratory protection filter -PAPR-A1B1E1P3 -Price: per piece -Number: 2 pieces -Minimum purchase: complete -Weight: 0.2 kg/piece

Dust filter system in very good condition Year of manufacture : Unknown Power : 0.75kW (fan) / 0.18kW (cleaning motor) Voltage : 220-380V Capacity; Unknown 8 (estimated approx. 1500m³/h) Approx. 2.5m high and 1m long (exact dimensions can be determined on request)

Forklift battery charger, industrial charger, forklift battery charger, industrial charger -Power: 24 volts -Power: 65 A -Connection: 230 volts -Dimensions: 480/450/H785 mm -Weight: 70 kg

Four-jaw chuck, 4-jaw chuck -Mouth size: Ø 200 mm -Passage: Ø 57 mm -Thread: Ø152 / Pitch 4mm -Weight: 19 kg

Agilent G 1321A Fluorescence Detector Ex Monochromator range 200 – 700 nm Em Monochromator range 280-900 nm Wavelength characteric Repeatability +/- 0.2 nm Accurcacy +/- 3 nm Flow cell 8μl Analog Output/Recorder/Integrator 100mV or 1 V Communications: CAN, GP-IB, RS 232; LAN Remote: ready, start, stop and shut down signals

Tool holder, milling holder, milling tool -Number: 4x holder SK40 -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -is only sold complete -Weight: 5 kg

Tool holder, milling holder, milling tool -Number: 8x SK50 mounts -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -is only sold complete -Weight: 32 kg

Flange bearing -Bore: Ø 20 mm -Mounting hole: Ø 12 mm -Bore distance: 64 mm -Dimensions: 130/130/H50 mm -Number: 16x available -Price: per piece -Weight each: 1.7 kg

Clip outlet for clipping machine FCA 3430-18 Poly Clip Item number : 157124 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36

Tool holder, milling holder, milling tool -Number: 5x SK50 holders -different recording sizes see pictures -Reducing sleeves, cutter head, shell end mill -Sale: only complete -Weight: 19.7 kg

Tool holder, milling holder, milling tool -Number: 2x adapter mounts SK50/SK45 -Number: 22x SK45 holders -different designs -Drill chucks, flat chucks, reducing sleeves, cutter heads, shell end mills -Sale: only complete -Weight: 90.2 kg

for 25 hp tractors ,normal PTO 540 rpm ,instruction manual , replacement catalog ,

Tool holder, milling holder, milling tool -Number: 5x SK45 holders -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 14 kg

Tool holder, milling holder, milling tool -15x recordings: SK40 -Adapter -Take: SK40 -Tool holder: 3x MK1/1x MK2/3x MK3/8x MK4 -Total length: mm -Sale: only complete -Weight: 23 kg

Tool holder, milling holder, milling tool -Number: 9x SK50 mounts -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 34 kg

Tool holder, milling holder, milling tool -Number: 4x holder SK50 -different designs -Adapter to: MK1/MK3/MK4/MK5 -Sale: only complete -Weight: 11.8 kg

Tool holder, milling holder, milling tool -Number: 15x SK50 mount -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 50 kg

Tool holder, milling holder, milling tool -Number: 25x SK50 mounts -various: versions -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 100 kg

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1405 rpm -Shaft: Ø 28 mm -Design: B3 -with extra cooling fan -Protection class: IP 55 -Dimensions: 410/260/H195mm -Weight: 20kg

Qty. 1 Second-hand filtration line Mfc.: Schenk, Anton Paar, Alafa Laval, Gross, Niwa, Pro-Wam Built: 1992 – 2014 Capacity: 250 hl/h

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 450 mm -Flange: Ø 172 mm -Hole circle: Ø 135 mm -Through hole: Ø 80 mm -Weight: 80 kg

Qty. 1 Second-hand homogenising chamber furnace Mfc.: Schmitz + Apelt LOI Type: Chamber furnace – GDKV 195/267/770/1280 Built: 1996 Stopped: 2019 Heat treatment of Al profiles! Operation temp.: 160 – 270 °C Max. temp.: 300 °C Natural Gas heated Scope of supply: Frame of the furnace Heating facility Air circulation facility Entry & Exit furnace doors Separator slide Measurement & Control device

Film thickness control system -Manufacturer: LITOMAT -Type: AIS-AR-1016 -Number: 1x available -Price: per piece -Dimensions: 145/165/H75 mm -Weight 0.6 kg/piece

Frequency converter, frequency converter, drive inverter, controller, variable speed drive -Power: 16 A -Input: 220V -Output: 3x 0-220 V -Output frequency: 0-100Hz -Quantity: 1 piece available -Dimensions: 300/270/H110 mm -Weight: 4.2kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Power: 16 A -Input: 220 V -Output: 3x 0-220 V -Output frequency: 0-100 Hz -Number: 1x converter available -Dimensions: 300/230/H110 mm -Weight: 3.6 kg

• For brochures, leaflets • Horizontal extension arm type 150, length 245 mm • Leaflet size: length max. 55 mm, width 50-105 mm • Speed max. 115/min, max. 20,000 leaflets/h • Adjustable amount of leaflets to be dispensed • Control unit VS-2002 right • Double-sheet detector • Fill level control magazine • Control via 18-pole plug-in coupling • Electr. connection 90-240V/50-60Hz

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 380 V 50 Hz -Output: 165 V 300 Hz -Power output: 25 kVA -Dimensions: 800/400/H320 mm -Weight: 224 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 195 mm -with: T slot 10 mm -Thread intake pitch: 3 mm -Weight: 5.7 kg

Filter system, clean air filter -Built-in, adjustable fan -Aluminum case -Volume flow rate: 1060 m³/h -Number: 3x blowers available -Price: per piece -Dimensions: 560/1160/H340 mm -Weight: 20 kg

max. film width: 355 mm max. speed: 0 /h serial no.: 8518 voltage: 100-240 V frequency: 50-60 Hz weight: 150 kg dimensions of press (L x W x H): Belichter 75 x 85 x 100 cm dimensions of press (L x W x H): RIP 70 x 50 x 70 cm repeating accuracy: +/- 25 µm RIP included up to 3000 dpi Red laser diode max. page width 355 mm max. 200 lpi screen ruling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. film width: cm max. speed: /h serial no.: 55C P0009 inlet width: 55 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. film width: 356 mm max. speed: 338 qcm/min Dimensions (L/W/H): 85x75x100 cm repeating accuracy: 25 µm material: Materialvorrat 76 m weight: 162 kg max. exposure length 2000 mm Resolution max. 2400 dpi red laser diode 670-680 nm point sizes 20-35 µm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

NH fuse -NT 4 -1000 A 500 VAC -Price: complete -Number: 2 pieces -Weight: 4 kg

Frequency converters, frequency converters, drive converters, controllers, variable speed drives, servo drives -Manufacturer: ABB, frequency converter type ACS101-K25-1 -Operator panel: ABB ACS100-PAN -Input: 200-240 VAC 50 / 60Hz -Output: 0 ... 300 Hz 1.4A -Dimension box: 200/180 / H100 mm -Weight: 1 kg

fixed point, fixed center point, fixed morse taper, fixed centering point, centering points -Manufacturer: WMW ABW, fixed center point -Adjustment: Morse taper MK5 -Number: 9x center points available -Price per piece -Dimensions: Ø 46/200 mm -Weight: 1.9 kg / pc.

face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: ABW, face driver -Type: MS6 -Mount: MK6 / M42, see photos -Total dimensions: Ø 108 x 278 mm -Weight: 7.9 kg

Altronic Surface Coating Swiss manufacturer As good as new, very precise system ca 300 Bh Year of construction 2009 New price of the system 334.000,- € lt invoice / without commissioning was developed for the solar industry to apply wafer-thin coatings of sulfur to solar modules, here it was important to achieve exact distribution, and it had worked. equipped with 9x linear vibrators type E-PLF-0.65-IP54 Total dimensions of the coating system: 180 w x 220 t x 210 h Dimensions: approx. 130w x 160 cm incl. control and adjustment table, possibly a belt conveyor is also available Shipping: 650,00 International shipping only on request, not EU can be very different, will be billed exactly

Description: AHT MIAMI FREEZER 250 Model: MIAMI 250 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 2300/2500 mm Depth (inside / outside): 720/850 mm Height (front/external access): 770/830 mm Volume (net): 850 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami 250 AHT is refurbished, freezer line is tested and cleaned internally and externally. Ready to use.

SOUND TOP ENERGY 250 – COSTAN + MIAMI 250 AHT ADVS Built-in refrigerated wall suitable for placement above freezers. Increase in sales space while maintaining the same footprint on the ground. Used and REFURBISHED product. Latest generation products, LED lighting and years of production from 2016. Dimensions: Length: 250cm Depth: 110cm ( included the freezer Miami 250 ) Height: 230cm Technical details: Equipped with Automatic Defrost Inverter. R290 Propane Gas. LED Lighting. Plug-in with Shuko plug. Operating temperature: BT -18C° / -25C° | TN +2C° / +6C° Net capacity: 1450 Lt. ( total capacity Sound Top 250 + Miami 250 ) Power input: 220 Volt. All the items are sold refurbished, tested and ready for use.

Description: AHT MIAMI FREEZER 185 Model: MIAMI 185 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 1770/1850 mm Depth (inside / outside): 830/990 mm Height (front/external access): 770/830 mm Volume (net): 650 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami 250 AHT is refurbished, freezer line is tested and cleaned internally and externally. Ready to use.