a f used for sale

Manufacturer: Membranenpumpe schwere Ausführung, FREETEXT1: zu hochviskoser<CRLF>Lacke,

Manufacturer: Bauknecht ATB, Type: 0V16/220, Model: 904431, Serial number: 738256, mH/Hz: 100 Hz, Output DC Volt: 3 x 220 V, Imax= Ampere: 16 A,

Manufacturer: WP-ARO, Type: 666120/240/C, Year: Membranenpumpe, Control: B1050623, Year :Membranenpumpe

Manufacturer: Homag, Type: Motorhalterplatte mit pnematischen ein und Ausrücken, From machine: Homag FÜL 526,

Manufacturer: Cefla, Type: Rollgang angetrieben, Working widht mm: 135, Total hight mm: 920, Adjustable: yes, Roller pitch mm: ca.220, Stop straightedge: yes, Feeding speed min-max m/min: 3-5, Drive adjustable: yes, Working widht mm: 135, Drive power kW: ca.0,5,

Manufacturer: Atlas Copco, Type: GA 45, Year: 1991, Volume flow m³/min: 5,94, Drive power kW: 45, Drying unit: yes, Compressed air min/max bar: 10, Year :1991

Manufacturer: Atlas Copco, Type: GA 55, Year: 1991, Control: Atlas Copco, Schraubenkompressor: yes, Running idle houres: 69200, Volume flow m³/min: 7,5, Verdichtungsenddruck bar 1: 12, Hauptläuferdrehzahl U/min 1: 2850, Antriebsleistung kW 1: 55, Year :1991

Manufacturer: Rapid, Type: Astglochbohrmaschine, Number of drilling spindles: 3 Spindeln Schnellkwechsel, Aperture/throat mm: 600, Units - total: 1, Main engine kW: 0,75, Drill feed - pneumatically: hand, Milling spindles vertical: 80 mm,

Manufacturer: Venyeskob, Type: Rollbahn nicht angetrieben, Length-width mm: 980 X 1400 X 920, FREE TEXT: Maschine wird gereinigt und Lackiert,

Manufacturer: Airlesspumpe B & M, Type: BMP 1132, Year: 2004, Kolbenpumpen gesamt: 1, Transmission ratio: 32:1, Volumenstrom Doppelhub ccm 2: 72, Volumenstrom Doppelhub ccm 2: 72, Compressed air bar max: 256, Pneumatic pump: yes, Wandhalterung: yes, Year :2004

Manufacturer: Berges Umrichter , Type: ACM-D2 11,0kw, Serial number: I 95072401, mH/Hz: 0-50 Hz/380 Volt,

Manufacturer: Comil, Type: Astro 700, Year: ca.1990, Hochschränke und Hänger: 680, Work piece width min-max mm: 300 - 2500, Min.-max. workpiece length in mm: 300 - 1300, Min.-max. workpiece height in mm: 800, Working width min min mm: yes, Hydraulical/pneumatical: yes, Min.-max. pressing length in mm: 1300, Cylinder horizontally: no, Pre-assembling conveyor: 22,5, Feeding speed continous adjustable: jyes, Discharge belt roller conveyor height: 7, Machine rigging: 2860, Press power kg /cm²: 7500, Year :ca.1990

Manufacturer: Schaltschrank Ersatz, Type: Inkl. aller Komponenten im Schrank,

Manufacturer: Homag , Type: KAL 310/8/A20/S2, Year: 2005, Control: PC 22, Work piece width min-max mm: min 55/100, Min.-max. workpiece height in mm: 12 - 60, Min-max feed m/min: 18 - 24, Einlauflineal gesteuert: yes, Premilling: 2 x 3kW, Application of separation agent: yes, Coil magazine: 2, Mitre stations: Fase / Gerade, Pre-milling: 2 x 1,5 kW, Bevel milling: FK 13 - 8Fach, radius milling: 4 kW, Corner tracing type: MN 21, Flat scraper: FA 11, Bonding part EVA: A 20, Top pressure belt/roller: Band, Work piece refeeding: vorinstalliert, FREE TEXT: Frreiplatz, Year :2005

Manufacturer: Hebrock, Type: AKV 2001 DK, Year: 1997, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-45, Min-max feed m/min: 8, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Pre-milling: Radius, Corner tracing type: yes, 1 motor: yes, Radius scraper: yes, Bonding part EVA: yes, FREE TEXT: Zustand sehr gut, Year :1997

Manufacturer: Hebrock, Type: AKV 88 F, Year: 1997, Control: hand, Glue application: no, Edgeband thickness max mm: 3,0, Edgeband height max mm: 50, Edgeband thickness max mm: 3,0, Glue system granulate/cartridge: Wärmedusche, Feeding speed min-max m/min: 0-7, Mitre stations: yes, FREE TEXT: Elektronische Eintellung der Kantenlänge, Year :1997

Manufacturer: Adam Bodenabsetzer, Type: Aufrichter, Year: ca.1998, Control: keine, Corpus length max mm: 1200, Working hight mm: 950, Hydraulical: Motorisch, Belt width: 600/1300, Total power kW: ca.5, Year :ca.1998

Manufacturer: Biesse, Type: Arrow ATS BAZ 3, Year: 2003, Control: Biesse, Working range X: 3000, Working range Y-axis: 1500, C axis: no, Pendulum processing: yes, Number of milling spindles: 0, Number of tool changers: 1, Number of tools per tool-magazine: 8, Vertical drills-X: 20, Drill vertical Y: 15, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, 2 station allocation: yes, Saw unit: yes, Year :2003

Manufacturer: Berkmann <CRLF>Zuluft und Abluft<CRLF>Spritzstand, Year: 2009, Control: yes, Heizmedium : Gas, Heat recovery: yes, Electronic control board: yes, Number of spray booths: 1, Number of evaporation booths: 1, Abluftventilator m³/h: 14000, Underfloor exhaustion: yes, Supply air system: yes, Dachausführung: yes, Zuluftgerät kW Leistung 1: 232, Exhaust air device: yes, Ex-installed lamps: yes, Heat recovery: yes, Rückwärmezahl %: 38, max. Wärmerückgewinnung kW: 77, Overall heating output: 160, Year :2009

Manufacturer: Giardina 3 D UV-Trockner, Type: GST 1400/3 Albatros, Year: 2005, Work piece width min-max mm: 100-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-60, Number of lamps: 3, kW power 1 lamp: 12, Lampen gerade eingebaut: yes, Adjustable: yes, Position of lamps: gerade, Power per lamp watt UV: 80, od distance mm: 120, Conveyor lenght mm: 3500, Feeding speed m/min: 2-7, Drive power kW: 1,5, Electrical power consumption kW: 44,1, Year :2005

Manufacturer: Technigraf , Type: Aktiprint S, Year: 2002, Work piece width min-max mm: 1300, Number of lamps: 2, Lampen gerade eingebaut: 2, Power per lamp watt UV: 2 x 120, Working hight approx mm: 5 - 35, Conveyor: PTFE Band, Through running hight mm: 20, Year :2002

Manufacturer: Comil, Type: Astro 700, Year: 1990, Work piece width min-max mm: 680, Min.-max. workpiece length in mm: 300 - 2500, Min.-max. workpiece height in mm: 300 - 1300, Working widht max mm: 800, Hydraulical/pneumatical: yes, High / low pressure: yes, Min.-max. pressing height in mm: 1300, Pre-assembling conveyor: no, Feeding speed max m/min: 22,5, Glazing tape: jyes, Connected load in kW: 7, Machine height mm: 2860, Machine width mm: 7500, Year :1990

Manufacturer: Astra Aspirazioni Due, Year: 2015, Volume flow rate m³/h: 24000, Filter surface in m²: 180, Qty. filter hoses: 84, Hose diameter in mm!: 200, Length of filter tubes: 3400 mm, Number of filter filter gallerys: 1, Required space L x W x H mm: 1890x7550, Weight approx. kg: 2300 + 1050 (ventilator), Year :2015

Manufacturer: Hübner Airlessgerät, Type: HP 4/32 RF, Transmission ratio: 30:1, Volumenstrom Doppelhub ccm 2: 27, Volumenstrom Doppelhub ccm 2: 27, Fördermenge: 27 m³, Luftverbrauch bei 6 bar: 8, Compressed air bar max: 256,

Manufacturer: Homatic, Type: Ausgangskarte 16x220V, Model: 2us ohne RC-Glied, Serial number: 2-083-01-5203, Nur Abholung : 350,

Manufacturer: Homag, Type: Eingabeeinheit mit LCD Anzeige und Tastatur, Model: 2-083-02-7107, Serial number: 2-083-02-7208, SN number: 2-083-02-7106, Year: 1992, Year :1992

Manufacturer: Homatic, Type: Streckenprozessor 4 Achser, Model: Rev 5 , Serial number: 2-083-02-7013, Year: 10.10.1995, Year :10.10.1995

Manufacturer: Winkelübergabe mit pnematischer Aushebung, Working length mm: 1000, Working widht mm: 980, Ex-schutz: yes, UV-Band: 200, Total hight mm: 80, Working length mm: 1000, Engine power kW: 0,5, Belt control: Riemenaushebung für Transportrichtung links und rechts/Aushebung 1800 mm länge,

Manufacturer: Homag, Type: 2 Achser HC 010 o.Analogeingang, Model: 2-Achser F.mini-Controller Rev, Serial number: 2-083-02-8071,

Manufacturer: Homag 16/E 1.0A HC 010, Type: Ein und Ausgangskarte , Serial number: 2-083-01-5423,

Manufacturer: Homag, Type: Homatic Steuerung Ausgangskarte, Serial number: 2-083-01-5408, Imax= Ampere: yes, Motor: gebraucht,

Manufacturer: Homatic, Type: Ausgangskarte, Model: ohne RC Glied, Serial number: 2-083-01-5203,

Manufacturer: Heesemann, Type: Bürstenwalze Anderlon, Year: aus MFA 8, Widht of roller coater: 1400/150, Year :aus MFA 8

Manufacturer: Weeke, Year: 1999, Type: aus Weeke BP 195, Motor mit Getriebe: yes, aus Maschine: 195 Weeke, I-KL: 7,5-10, Motor mit Getriebe: yes, Baugrösse L x B x H mm: Werkzeugaufnahme HSK 63 F/18000-24000 Umin/12 KW Spindel, Year :1999

Manufacturer: Wild, Type: Abstapelautomat, Year: 2001, Control: Bürkle, Work piece width min-max mm: 500-1250, Min.-max. workpiece length in mm: 500-3000, Min.-max. workpiece height in mm: 3-25, Vacuum feeding: yes, Longitudinal feeding: yes, Stacking pattern, double-row: mehrspurig, Stack height in mm: 1000, Cycles approx.: 6, Removal of protective boards: yes, Erection in a pit: no, Drain roller operation: yes, Year :2001

Manufacturer: Horstmann Antriebstechnik, Type: HD 541 Statomat, Serial number: 511114,

Manufacturer: Homag Anschlaglineal gesteuert, Type: aus KFL 10, FREITEXT1: Pneumatisch gesteuert, FREITEXT2: 8 fach Revolver, FREITEXT3: 10 mm Schiene, FREITEXT4: mit Befestigung Kettenbahn,

Manufacturer: Lackaufheizer EX Ausführung, Year: 2000, FREETEXT1: geeignet für 200 Liter Fässer, FREETEXT2: Heizung Elektrisch, FREETEXT3: fahrbar auf Rolle, FREETEXT4: Durchmesser 650 mm, FREETEXT5: Höhe 1000 mm, Year :2000

Manufacturer: Rippert, Type: Abdunstwand, Year: 1990, Control: hand, Filter surface in m³: ca.1800 X 2200 X 300, Exhaust air m³/h: 5000, Exhaust air m³/h: 5000, Year :1990

Manufacturer: Abdunstwand , Type: Rippert mit Rohrventilator, Channel width in mm: 3200 mit Rippe und 1000 ohne, Channel height in mm: 2000,

bore capacity in steel (diameter): 40 mm throat: mm bore stroke: mm total power requirement: 4 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1 t Stroke: 315 mm table surface area: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Arminius, Type: ST 2, Year: 1991, Control: Hand, Table length: 2000, Work piece hight min-max mm: 10-60, Feeding speed min-max m/min: 5-25, Controllable slewable: yes, Number of sanding units: 2, 1st sanding motor controlled and tiltable: Schleifscheiben Typ Arminius, Power kW: 1,1, 2nd sanding motor controlled and tiltable: Schleifscheiben Typ Arminius, Power kW: 1,1, Power kW: 1,1, Power kW: 1,1, Control panel at bottom: yes, Hight adjustment by hand wheel: yes, Year :1991

• Nominal cooling capacity 5600-6000 kcal/h Temperature difference input-output 5°C Volume flow max. 20-24 l/min Thermoplastic tank 39 l Mobile Drive 230V/50-60Hz/2.33 kW

General2-axis universal turning machine with - partiall hollow clamping device (hydr.) inner draw tube Ø 52 mm - C-axis and spindle brake (hydr.) - 12 stations circle revolver Sauter reception acc. VDI 30, DIN 69880-30 with tool drive Connection/drive acc. DIN 5480 Direct measuring system, glas scale in X-axis - tailstock; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTransverse stroke190 mmLongitudinal stroke525 mmClamping chuck diameter max.210 mmWork spindle (left)Spindle noseFlat flange Spindle bore73 mmDiametre of spindle nose140h5 mmSpindle diametre on front bearing100 mmMain drive 1Drive power (100% DC)13 kWSpeed range20 - 6000 rpmTorque (100% DC)171 NmC-Axis Speed-300 rpmTorque of C-Axis (holding torque)192 NmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools12 Speed max.-500 ...

General2-axis universal turning machine with - partiall hollow clamping device (hydr.) inner draw tube Ø 52 mm - C-axis and spindle brake (hydr.) - 12 stations circle revolver Sauter reception acc. VDI 30, DIN 69880-30 with tool drive Connection/drive acc. DIN 5480 Direct measuring system, glas scale in X-axis - tailstock; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTransverse stroke210 mmLongitudinal stroke525 mmClamping chuck diameter max.210 mmMain drive 1Drive power (100% DC)13 kWSpeed range20 - 6000 rpmTorque (100% DC)171 NmC-Axis Speed-300 rpmTorque of C-Axis (holding torque)192 NmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose140h5 mmSpindle bore73 mmSpindle diametre on front bearing100 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools12 Speed max.-500 ...

Working width: 1.100 mm Number of sanding units: 2 st. Workpiece thickness max.: 150 mm sanding belt measurements: 1.110 x 1.900 mm Motor roller: 15 kW Motor pad: 11 kW Feed motor: 1,5 kW Feed speed: 3 - 15 m/min. Overall size: 1.750 x 2.210 x 2.280 mm Weight: ca. 3.300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 13 mm weight of the machine ca.: 8 t distance between columns: mm total power requirement: kW dimensions of the machine ca.: m motorized limit stop cutting crack adjustment cutting angle adjustment foot switch Technische Daten / technical details: Schnittlänge / max. cutting length 3050 mm Schnittleistung / cutting capacity 13 mm Hinteranschlag / limit stop 1000 mm Antriebsleistung Motor/ drive capacity motor 22 kW Gewicht der Maschine ca. / weight 8000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tom Chandley BOMK4MTU3 Oven and proofer Serial: 10837 Stainless, 15.5Kw, Three deck oven with proofer, adjustable temp and timer controls, chamber size 900mm x 700mm x 180mm, stone based, mobile, 3Ph