131,092 used machines on RESALE, but how to find them? Machine Search
Rear silencer, exhaust system, muffler, silencer, charger carburetor, radiator, coolant cooler -Manufacturer: AVA, water cooler for BMW 3 Series unused OVP -Type: BW2081 -Dimensions: see photos -Carton dimensions: 660/140/H430 mm -Weight: 4.6 kg
Inv. Num. : 4368 Type: Comact Scan 2M Producer: ATOS Created: 2013 Parameters: Software: ATOS v7.5 Stack height: 1.8 mm Machine arm: 0.9 mm Swivel head: Foba Superball M-1 Notebook: Dell Precision M4700 Equipment: 1x Silver License Key 1x Remote Control 1x original notebook 1x bag with PC 1x Stand 2x Suitcase 3x Folders
clamping force: 1300 kN injection volume: -- cm³ screw diameter: 45 mm platen size: 470 x 470 mm Condition: used, Specification: Horizontal injection moulding machine, Type: Allrounder 470 S 1300-350 Injection unit: - Screw diameter: 45 mm - Centring ring diameter: 125 mm - Shot weight max.: 210 g (PS) - Injection pressure: 1,840 bar Clamping unit: - Clamping force: 1300 kN - Opening stroke max.: 850 mm - Mould installation height: min. 275 mm - Mould mounting platens: 470 x 470 mm - Operating hours approx.: 91,000 - Core pulls: 1x - Valve gate: 1x pneumatic - Hot runner control points: 12x - Temperature control unit interfaces: 6x (20 mA) - Conveyor belt in the machine - Selector unit. available - Release for high temperature up to 450°C - Communication card for ProSeS interface available - Robot interface available. Technical pr ...
three-phase motor, electric motor -Manufacturer: ADDA, electric motor type 100LB-4 -Power: 3 kW -Speed: 1400 rpm -Shaft: Ø 28 x 60 mm -Design: B3/B14 -Protection class: IP 55 -Dimensions: 360/200/H250 mm -Weight: 22.6 kg
Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: Nebelmeyer, milling chuck SK40 -Type: Mü 45 SN 8 004 - M 16 -Mounting: Ø 33 mm -Versions: see photos -Dimensions: Ø 65 x 150 mm -Total weight: 1.4 kg
Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder -Milling holder: SK40 2 pieces -Mounting: Ø 32 mm -Versions: see photos -Price/Delivery: complete -Dimensions: Ø 63 x 150 mm -Weight: 1.0 kg/piece
live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: ABW, live center -Type: ZNB 204 -Recording: MK4 -Dimensions: Ø 100 x 215 mm -Weight: 3.5 kg
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK6/5 -Recording: MK6 -Holder tool: MK5 -Dimensions: Ø 63/220 mm -Weight: 3.4 kg
tool holder, milling holder, milling tool, long milling arbor, arbor holder, cutter head holder, cutter head holder -Milling holder: cutter head holder SK50 -Mounting: Ø 22 mm / M10 -Dimensions: see photos -Dimensions: Ø 98 x 554 mm -Weight: 19.3 kg
Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: ABW, thread cutting chuck holder MK4 -Type: GBLK4 -Bore: Ø 14 mm -Number: 3x cutting chuck available -Price: per piece -Dimensions: Ø 32 x 170 mm -Weight: 1.9 kg/piece
Key data: 1300 , 40
Screw diameter: 40 mm Injectable volume: 182 mm Injection pressure: 2120 mm Passage between columns: 420 x 420 mm Opening stroke: 500 mm Core: 1 Blower: Robot Interface
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK5/3 -Dimensions: Ø 44/80 mm -Weight: 0.6 kg
Key data: 3200 , 700 , 60
Screw diameter; 60 mm Injectable volume: 792cm3 Injection pressure: 2500 bar Column width: 720 x 720 mm Minimum mould thickness: 300 mm max: 700 mm Aperture stroke: 700 mm Cores: 3 Robot Interface: YES Options with ARBURG robot
Screw diameter; 55-35 mm Injectable volume: 558 - 139 cm3 Injection pressure: 2380-2500 bar Column width: 630 x 630 mm Mould thickness min: 300 mm max: 600 mm Aperture stroke: 600 mm Cores: 2 Robot Interface: Yes Options: Rotating base: Arburg 243849 year: 2012
Printingmachine - Two Colour (perfector) Make Aurelia Model 702P Elite Year 1985 ? Maximum sheetsize 720 x 1020 mm Dampening Alcohol fiilm dampening with Miniweb chilling pump Perfecting 2/0 - 1/1 Details high pile delivery Available Direct
Key data: 510 mm, 510 mm, 510 mm
Inv. Num. : 7409 Type: ARROW 500 Producer: CINCINNATI MILACRON Created: 1996 Parameters: Control system: ACRAMATIC A 2100 Number of stacking positions: 21 Work table length: 700 mm Work table width: 520 mm Maximum table load (uniform): 350 kg Maximum vertical spindle speed: 6000 1/min X-axis travel: 510 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Cone: CAT 40 Machine height: 2650 mm Machine length: 2700 mm Machine width: 2000 mm Machine weight: 3050 kg Equipment: Tool Holder
Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier -Tool carriage: support carriage support carrier -Tool holder: Ø 32 mm -Dimensions: see photos -Dimensions: 460/190/H205 mm -Weight: 21.6 kg
Key data: 300 mm
Cutter diameter: 300 mm Max. notching width: 350 mm Max. notching depth: 110 mm Max. profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Pneumatic Workpiece Clamps Minimum Quantity Spraying Device Manual feed Weight: approx. 280 kg
Planetary mixer, vessel and stirrer made of stainless steel, two vessels with a volume of 60l each.
D and D Stainless cutter Stainless guillotine, mounted on conveyor, previously used for cutting cakes and honeycomb, conveyor dimensions 2200mm x 640mm, adjustable dwell and cutting time, variable speed, 3Ph
Alimex Paddle Mixer M 400 Year of manufacture: 2021 / new machine Volume: 400 liters Max. filling: 300 kg Speed: 1 forward speed and 1 reverse speed each Power: 4.4 kW / 400 Volt Alimex Paddle Mixer M 400 Year of manufacture: 2021 / new machine Volume: 400 liters Max. Loading: 300 Kg Speed: 1 forward speed and 1 reverse speed each Power: 4.4 kW / 400 V
Electric motor, three-phase motor -Manufacturer: ABM Greiffenberger, electric motor type 3 DF 1/132 Sb-2 -Power: 9.2 kW -Speed: 2840 rpm -Shaft: Ø 38 x 80 mm -Design: B5 -Protection class: IP 54/55 -Dimensions: 450/300/H250 mm -Weight: 43 kg
Edge banding, edge trimming. Veneer roll -Edge tape: edge banding approx. 62 rolls -Type: various designs, see photos -Price/Sale: complete -Dimensions: 1120/630/H900 mm -Weight: 277 kg
Used decanter made by Alfa Laval, model: UVNX 314. Two motors: 7,5 kW and 3 kW. Parts in contact with the product in stainless steel. Max drum speed 3250 rpm. Documentation available. The machine was used for edible oil.
Size LxWxH 4749x1060x 1376 mm Weight 3200 kg Main drive size 11-45 kw Back drive size 5.5-15 kw
Grinding wheel mount, standard flanges, special flanges, grinding wheel flange -Grinding wheel mount: Mounting diameter: Ø 76 mm -Shaft: Perforated shaft cone Ø 45-58 mm -Number: 3x mounting flanges available -Price: per piece -Dimensions: Ø 148 x 55 mm -Weight: 3.9 kg/pc.
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 45-58 mm -Type designation: 407x10-100x127 015 322 0020 -Quantity: 1x mounting flange available -Dimensions total Ø 180 x 105 mm -Weight: 6.5 kg
Suspension clamp, clamp sleeve, sliding gate sleeve, cable clamp, cable trolley, cable trolley component, cable holder, cable trolley -Cable trolley: Cable trolley with polyamide rollers -Type: Round 10-16 mm -Number: 1 cable trolley available -Dimensions: 80/80/H93 mm -Weight: 0.1 kg
Mill, Use Machine Type : B 315 U Manufacturer : Alpine Material : Mild steel
Three-jaw chuck, three-jaw lathe chuck -Manufacturer: AROWA, three-jaw chuck chuck size Ø 200 mm -Passage: Ø 55 mm -Bolt circle: Ø 175 mm / M10 -Accessories: incl. 2nd set of interchangeable jaws -Dimensions: Ø200 x 105 mm -Weight: 13.8 kg
Eccentric press vineyard type AR160 tons With protective shield. YOC 1971 2 rotational speeds via mechanical gearbox Switchable. Central lubrication. Low-wear steep-threaded coupling. Table dimensions : 800x1000 mm Visits : possible at any time. Total weight approx. 10.5 tons
Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control, converter, controller -Manufacturer: Power Automation, Servo Controller -Type: MI305 -Dimensions: 300/115/H250 mm -Weight: 3.8 kg/piece
CNC control, control rack, electronic module -Manufacturer: Power Automation / Innovance Technology, Control -Type: Replacement device ArtNo. 181998 -Individual components: see photos -Dimensions: 255/330/H140 mm -Weight: 5.7 kg
CNC control, control rack, electronic module -Manufacturer: Power Automation / Innovance Technology, CNC control -Type: PA8000 LW -Dimensions: 330/250/H130 mm -Weight: 5.9 kg
Multi-spindle drilling machine make : Burkhard und Weber / Arboga With interchangeable table Dimensions : LxW 800 x 800 Equipped with 10 spindles, drilling diameter 13.5 mm Cam derailleur, automatic and set-up mode. 2 Coolant pumps . Propulsion : electro-hydraulic. Very powerful, it can be powered with 14 active spindles at the same time. become. Total weight: approx. 8.0 tons. (Forklift loading by GEDE possible)
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø mm -Mounting: Hole shaft cone Ø 40-48 mm -Type designation: not available -Dimensions total Ø 180 x 85 mm -Weight: 6.8 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø mm -Mounting: Hole shaft cone Ø 38-48 mm -Type designation: not available -Dimensions total Ø 180 x 85 mm -Weight: 7,3 kg
USED in working order HMI for Husky PET and conventional injection molding machines All Husky models manufactured between 1998 and 2005 Brand Xycom Automation Model 9960 Part number 726619 Voltage 100-250v Frequency 50 and 60Hz Made in USA
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 45-59 mm -Type name: 508x10-100x127 / 508x10-80x127 -Dimensions total Ø 190 x 100 mm -Weight: 7.7 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø mm -Mounting: Hole shaft cone Ø 38-49 mm -Type designation: not available -Dimensions total Ø 180 x 85 mm -Weight: 6.6 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø mm -Mounting: Hole shaft cone Ø 34-43 mm / M50 -Type designation: not available -Dimensions total Ø 180 x 80 mm -Weight: 7 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø mm -Mounting: Hole shaft cone Ø 46-59 mm / M50 -Type designation: not available -Dimensions total Ø 180 x 80 mm -Weight: 7,1 kg
In-store oven Miwe Aero 8.0604 with proofer - Digital Miwe FP control - for 8 trays 60x40 cm - with proofer - for 16 trays 40x60 cm - Steam Destroyer - 400/230V 3 / N / PE / 50 Hz - 15.4 kW -Electric Dimensions: 90 cm wide 100 cm deep 210 cm high
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve/adapter sleeve MK4/3 -Dimensions: Ø 38 x 330 mm -Weight: 1.6 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 30-39 mm -Type designation: not available -Dimensions total Ø 180 x 75 mm -Weight: 5.9 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 50-60 mm -Type designation: not available -Dimensions total Ø 180 x 90 mm -Weight: 8 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: holder Ø 213 mm -Mounting: Hole shaft cone Ø 56-59 mm -Type designation: not available -Dimensions total Ø 260 x 120 mm -Weight: 14.3 kg
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 49-64 mm -Type designation: not available -Dimensions total Ø 210 x 125 mm -Weight: 10.9 kg
maximum number of results exceeded
please refine your search
