a e used for sale

Three-phase motor, electric motor -Power: 4 kW -Speed: 1440 rpm -Shaft: Ø 28 x 35 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 385/300/H230 mm -Weight: 52 kg

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 920 rpm -Shaft: Ø 28 x 60 mm -Design: B5 -Protection class: IP 54 -Dimensions: 385/276/H250 mm -Weight: 32 kg

Electric motor, three-phase motor -Power: 0.3 kW -Speed: 1330 rpm -Construction: B14 -Protection class: IP 65 -Dimensions: 247/140/H200 mm -Weight: 7 kg

Alfa-Laval evaporator for blast freezer or freezer. Make Alfa-Laval with 3 fans 560mm, 12 mm fin spacing, Type: ILBEH563GD, Hot gas defrosting, New unused.

Electric motor, three-phase motor -Power: 0.25 kW -Speed: 670 rpm -Shaft: Ø 19 x 40 mm -Design: B3 -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 280/205/H150 mm -Weight: 7.5 kg

radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: 0.37 kW -Speed: 2800 rpm -Max. volume flow: m³/h -Max. pressure: Pa -Inlet connection: Ø 190 mm -Outlet connection: Ø 190 mm -Impeller: Ø mm -Dimensions: 700/580/H560 mm -Weight: 37 kg

Key data: 2613 , 3194 , 6300

2613 KW KKK condensing steam turbine Twin AFA46 GT6 from 2004 in good condition, used for sale. Manafacture: KKK Model: AFA 46 GT6 Type: Steam Condensation Serial Number: 4.746.137 Power [KW]: 2.613 Pressure inlet [bar]: 29 Temperature inlet [°C] 360 Pressure outlet [bar]: -0.8 Year of construction: 2004 Weight [kg]: – Dimensions LxWxH [cm]: – More information here: stromerzeuger-discount.de/angebote/dampfturbinen/2610-kw-kkk-twin-afa4 6-gt6/

Three-phase motor, electric motor -Power: 1.3 kW -Speed: 2810 rpm -Shaft: Ø 23 x 50 mm -Construction: B14 -Protection class: -Dimensions: 280/255/H208 mm -Weight: 20 kg

Compact cascade extruder - 1x extruder with 80 mm screw diameter - 1x extruder with 70 mm screw diameter - Vacuum degassing or atmospheric - Control cabinet / control for both extruders - Extrusion nozzle

Compounding - granulation line, consisting of: Extruder twin screw synchronization, drive 31 kW Segment screws and barrels, water-cooled Screws 2x Ø 35 mm – 44 L/D 1x degassing zone (atmospheric) 1x degassing zone (vacuum) 1x side dosage Screen changer double piston type K-SWE 101 with hydraulics Switchboard Water bath, granulator, etc. optionally also available on request.

Three-phase motor, electric motor -Power: 4 kW -Speed: 1425 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 -Dimensions: 395/300/H225 mm -Weight: 41 kg

Electric motor, three-phase motor -Power: 15 kW -Speed: 1455 rpm -Construction: B5 -Dimensions: 660/350/H420 mm -Weight: 112 kg

Three-phase motor, electric motor -Power: 9.2 kW -Speed: 2840 rpm -Shaft: Ø 38 x 80 mm -Construction: B5 -Protection class: IP55 -Dimensions: 450/295/H250 mm -Weight: 43 kg

X/Y/Z axis travel (mm):750 x 500 x 400 U/V axis travel (mm):770 x 520 Work tank dimensions (W x D x H, mm):1264 x 973 Max. workpiece weight (kg):1500 Distance from floor to table top (mm):1000 Machine dimensions (W x D x H, mm):2100 x 2860 x 2390 Machine weight (kg):5600

Three-phase motor, electric motor -Power: 0.25 kW -Speed: 1400 rpm -Shaft: Ø 14 mm -Design: B3 -Protection class: IP 33 -Dimensions: 260/220/H240 mm -Weight: 12 kg

Fixed stop side on the left. Brief description of the equipment: - Fixed stop side left - Workpiece transport device - Upper pressure - Control Power Control PC22 - Release agent spraying unit - Joining milling unit, 2 x 3 kW - Gluing part A20 Basic for rolls up to 3 mm and strip goods up to 20 mm, with melting unit with granulate container and quick-clamping system - Cross-cut unit, 2 x 0.8 kW, with pneum. Dissimulation - Lubricant spray agggregat - Pre-milled aggreagt 1.5 kW, pneum. adjustable - Mould milling unit FK13, 2 x 0.4 kW - Universal milling unit 4 kW, controlled, with infinitely variable axis - Multi-plastering device MN21 autom. - Finishing unit FA11, with finishing device, detergent application and buffing unit, pneum. adjustable -Noise protection - Free space for additional processing units Further equipment information: - Machine stand throughout f ...

Electric motor, three-phase motor -Power: 0.55 kW -Speed: 2840 rpm -Shaft: Ø 14 x 30 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 215/175/H150 mm -Weight: 4.2 kg

electric motor, three-phase motor -Manufacturer: Schorch, electric motor type KA3280M-BB024-050 -Power: 1.1 kW -Speed: 2850 rpm -Shaft: Ø 19 x 40 mm -Design: B3 -Protection class: IP 54 -Number: 25x available -Price: per piece -Dimensions: 275/156/H205 mm -Weight: 10 kg

Cool Guntner Type: S-CPGHN 080.2F/210-AU2/18P. E Fin spinning: 10 mm Fans: 2x800 mm Dimensions: 400x170x140 mm Refrigerant: CO2 Volume: 99.8 l Quantity in stock: 2 Reference number: CH 405 Condition: Used in good condition

electric motor -Power: 0.37 kW -Speed: 1500 rpm -Shaft diameter: 14 mm -Design: B3 - Protection class: - -Dimensions: 240/186/H175 mm -Weight: 12 kg

electric motor, three-phase motor -Power: 1.1 kW -Speed: 2800 rpm -Shaft diameter: 19 mm -Design: B5 -Protection class: IP 44 -with brake -Dimensions: 375/200/H215 mm -Weight: 26 kg

Three-phase motor, electric motor -Power: 0.25 kW -Speed: 870 rpm -Shaft: Ø 19 mm -Construction: B3 -Protection class: IP 55 -Dimensions: 270/155/H190 mm -Weight: 8.1 kg

Electric motor, three-phase motor -Power: 0.8 kW -Speed: 1440 rpm -Shaft diameter: 24 mm -Construction: B5 -Protection class: IP 33 -Dimensions: 310/200/H250 mm -Weight: 21.8 kg

three-phase motor, electric motor -Power: 2.2 kW -Speed: 930 rpm -Shaft: Ø 28 mm -Design: B3 -Protection class: IP 44 -Brake: 220 Volt -Quantity: 1 piece available -Dimensions: 470/270/H205 mm -Weight: 39 kg

power capacity: 5,5 kW volt: 380 V ampere: 11,6 A weight of the machine ca.: 0,05 t dimensions of the machine ca.: 0,6x0,3x0,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electric motor, three-phase motor -Power: 0.75 kW -Speed: 2770 rpm -Shaft diameter: 20 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 315/160/H200 mm -Weight: 8.15 kg

electric motor, three-phase motor -Power: 1.1 kW -Speed: 920 rpm -Shaft diameter: 24 mm -Bolt circle flange: Ø 165 mm -Flange: Ø 200 mm -Design: B5 -Protection class: IP 54 -Dimensions: 315/200/H205 mm -Weight: 15.5 kg

electric motor, three-phase motor -Power: 0.12 kW -Speed: 680 rpm -Shaft diameter: 14 mm -Design: B3 -Protection class: IP 33 -Price: per piece -Quantity: 6 available -Dimensions: 235/190/H135 mm -Weight: 7.7 kg

Electric motor, three-phase motor -Power: 5.5 kW -Speed: 1430 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: -Price: per piece -Number: 1x available -Dimensions: 400/340/H350 mm -Weight: 52 kg

Shell end mills, shell mills, milling cutters -Number: 8 pieces finishing cutter/roughing cutter -Socket: Ø 40 mm -Various diameters: 120-125 mm -Different producers -Price: complete -Weight: 22 kg

Shell end mills, shell mills, milling cutters -Number: 18 pieces finishing cutter/roughing cutter -Socket: Ø 40 mm -Various diameters: 100-125 mm -Different producers -Price: complete -Weight: 57.6 kg

Shell end mills, shell mills, milling cutters -Number: 9 pieces finishing cutter/roughing cutter -Socket: Ø 32 mm -Various diameters: 76-100 mm -Different producers -Price: complete -Weight: 13.3 kg

Shell end mills, shell mills, milling cutters -Number: 12 pieces finishing cutter/roughing cutter -Socket: Ø 32 mm -Various diameters: 75-110 mm -Different producers -Price: complete -Weight: 21.3 kg

Shell end mills, shell mills, milling cutters -Number: 28 pieces finishing cutter/roughing cutter -Socket: Ø 22 mm -Various diameters: 49-80 mm -Different producers -Price: complete -Weight: 10.5 kg

Three-phase motor, electric motor -Power: 9.2 kW -Speed: 2840 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: IP 55 -Dimensions: 450/295/H250 mm -Weight: 43 kg

Key data: 500 mm, 3 0, 3500 kg

Travel X 500 mm / Y 350 MM / Z 300 mm Water bath machine Automatic wire threading incl. radiator

Offer 23291 Specifications: End processing machine for pipes with six-fold turret - tool holder Tube diameter 6 - 40 mm Max. forming length 100 mm Drive 400 V / 7.5 kW Space requirement approx. W 1200 x D 2100 x H 1500 mm Weight approx. 1400 kg

Three-phase motor, electric motor -Power: 45 kW -Speed: 2955 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 770/540/H510 mm -Weight: 300 kg

Electric motor, three-phase motor -Power: 1.5 kW -Speed: 1420 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: IP 55 -Dimensions: 360/260/H200 mm -Weight: 32 kg

Electric motor, three-phase motor -Power: 0.75 kW -Speed: 1400 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: EX -Dimensions: 315/260/H200 mm -Weight: 24.6 kg

Electric motor, three-phase motor -Power: 0.75 kW -Speed: 1380 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: EX -Number: 1x available -Price: per piece -Dimensions: 280/245/H200 mm -Weight: 22 kg

Electric motor, three-phase motor -Power: 0.55 kW -Speed: 1420 rpm -Shaft: Ø 14 mm -Construction: B5 -Protection class: IP 33 -Dimensions: 250/230/H160 mm -Weight: 11 kg

Electric motor, three-phase motor -Power: 1.1 kW -Speed: 1410 rpm -Shaft: Ø 18 mm -Construction: B3 -Protection class: EX -Dimensions: 390/210/H340 mm -Weight: 49 kg

Three-phase motor, electric motor -Power: 3 kW -Speed: 1430 rpm -Shaft: Ø 32 mm -Design: B5 -Protection class: IP 44 -Dimensions: 445/252/H320 mm -Weight: 50 kg

Electric motor, three-phase motor -Replacement motor: for pressure blower -Power: 3.0 kW -Speed: 2800 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: - -Dimensions: 390/320/H320 mm -Weight: 24 kg

Electric motor, three-phase motor -Power: 15 kW -Speed: 2910 rpm -Shaft: Ø 42 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 580/350/H395 mm -Weight: 95 kg

Three-phase motor, electric motor -Power: 11 kW -Speed: 2905 rpm -Shaft: Ø 42 mm -Construction: B35 -Protection class: IP 54 -Dimensions: 580/420/H350 mm -Weight: 110 kg

VM PLC CONTROLLED POWDER COATING RECIPROCATOR The powder coating reciprocator is designed for automated painting applications. It ensures perfect coating of the work pieces passing in front of it by moving the spray guns up and down in a single axis. It moves in one axis along the vertical guide column, providing maximum performance under daily working conditions withstanding continuous load. The brake drive motor and gearbox have been choiceed to ensure the reciprocator’s long life and performance under heavy working environment conditions. The mechanical system design with chain or belt provides silent and vibration-free vertical movement. Perfect coating is achieved with easy adjustment of stroke and speed. RECIPROCATOR CONTROL UNIT • Remote control panel 7" 65K color hand touch LCD screen, • Two reciprocators can be controlled independently from the same display, � ...

Three-phase motor, electric motor, geared motor -Power: 3kW -Speed: 950 rpm -Shaft: Ø 28 mm -Construction: B3 -Number: 1x available -Dimensions: 460/260/H335 mm -Weight: 42.8 kg

Three-phase motor, electric motor -Motor: is unused -Power: 160 kW -Speed: 2960 rpm -Shaft: Ø 65 mm -Protection class: IP 54 -Construction: B35 -Dimensions: 1190/920/H730 mm -Weight: 730 kg