a e used for sale

Rubber protective mats, conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Ammeraal Beltech, conveyor belt type Peflex ESF 3/1 A21 015 beige M1 FG -Product No.: 15-01737 item 513334 -Width: 50mm -Length: 20000mm -Thickness: 1mm -Number: 6x conveyor belt available -Price per piece -Transport dimension: Ø 170 x 50 mm -Weight: 0.9 kg/pc.

Rubber protective mats, conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Ammeraal Beltech, conveyor belt type Peflex ESF 3/1 A21 015 beige M2 FG -Item: 513334 -Width: 50mm -Length: 50000 mm -Thickness: 1mm -Number: 1x conveyor belt available -Price per piece -Transport dimension: Ø 240 x 50 mm -Weight: 1.9 kg/pc.

thermal switch, circuit breaker, electric circuit breaker, thermal switch, temperature switch, thermostat controller -Manufacturer: AEG, thermal switch thermostat controller unused original packaging -Type: EGO II K 662 980 599 -Voltage: 16(4)A/380V -Number: 2x controller available -Price per piece -Dimensions cardboard: 140/85/H40 mm -Weight: 0.1 kg/pc.

Scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift table, flat form lift table -Manufacturer: Edmolift, scissor lifting table flat-form lifting table type TUB 600 and agg -Load capacity: 600 kg -Platform: approx. 1450 x 900 mm - Dimensions retracted: height 85 mm -Dimension extended: height 800 mm -Lifting time: approx. 13 seconds. -Quantity: 1x lifting table available -Price per piece Transport dimensions: 1480/930/H260 mm -Weight: 212 kg with pallet

Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, -Manufacturer: Pilz, power supply power supply type P10 APS -Power supply: ELBA-electric type euro power ESPS835515/X -Card block: Phoenix Contact SKBI 64/H15- -Dimension: 120/70/H190 mm -Weight: 0.5 kg/pc.

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type KAF37 DRS71S4BE05HR/MM03/AMA6 i = 106.38 -Drive motor: with frequency converter MM03D-503-00 -Speed: 13 - 2.6 rpm -Power: 0.37/0.075 kW -Hollow shaft: Ø 30 x 120 mm -Protection rating: IP54 -Quantity: 2x geared motor available -Price per piece -Dimensions: 490/290/H190 mm -Weight: 26 kg/pc.

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type KAF37 DRS71S4BE05HR/MM03/AMA6 i = 44.46 -Drive motor: with frequency converter MM03D-503-00 -Speed: 31 - 6.3 rpm -Power: 0.37/0.075 kW -Shaft: Ø 25 x 50 mm on both sides -Protection rating: IP54 -Quantity: 1x geared motor available -Price per piece -Dimensions: 470/290/H210 mm -Weight: 26kg

Screw jack, linear drive, linear gear, lifting gear, screw jack, spindle drive, electric actuator, valve drive, actuator, servomotor, screw jack, lifting drive -Spindle lifting gear: from double mitre saw elumatec DG 204 -Manufacturer gearbox: Atlanta, type 539 05 040 i 4 -Engine manufacturer: SEM, type DPM30E4 36 V 0.18 kW -Dimensions: 450/320/H130mm -Weight: 9.5 kg

Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane drive, crane undercarriage, trolley -Manufacturer: Abus, electric chain hoist with powered chassis -Chain hoist: Abus type GM4- load capacity 1000 kg -Main stroke: 5 m/min -Fine stroke: 1.3 m/min -Chain length: 3.3 m -Electric chassis: Abus EF14 -Carrier width: max. 340 mm -Dimensions: see photo technical drawing -Electrical accessories: connection cable see photos -Transport dimensions: 900/700/H340 mm -Weight: 63 kg

Condensate drain, pressure reducing valve, condensate drain, valve, check valve, control valve -Manufacturer: Bekomat Ecoair, condensate drain type KA02 ACO AO / AK 05 -Voltage: 230 VAC/50 Hz Temperature: 1 °C/ 60 °C -Nominal pressure: max. 16 bar -Quantity: 3 available Price: per piece -Transport dimensions: 220/140/H150 mm -Weight: 1.6 kg/pc.

gear motor, electric motor, servo gear motor -Manufacturer: SEW-Eurodrive, servo gear motor type RF27 CMP63M/KY/AKOH/SM1 -Gearbox:Type RF27 455 rpm i 6.59 -Motor: Type CMP63M/KY/AKOH/SM1 -Power: 3.30 Nm -Speed: 0 - 3000 rpm -Shaft: Ø 25 x 50 mm -Dimensions: 465/140/H170 mm -Weight: 10.5 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Schmalz, vacuum pump type EVE-TR 4 AC3 -Drive: 0.18 kW / 2800 rpm -Suction capacity: 4.1 m³/h -Suction pressure: -850 mbar -Quantity: 1 vacuum pumps available -Price: per piece -Dimensions: 220/155/H175 mm -Weight: 7.5 kg

Plasma cutting machine, plasma cutter for plasma cutting system, plasma/oxygen cutting system, servo motor, gear motor -Manufacturer: CR Electronic SRL / Power Automation, servo drive for plasma/oxygen cutting system -Cutting system: Type OXY 5.1 - 25 -Servo motor: Power Automation type PAT3-0190-60-560-B-S4-SRM50 -Individual components: see photos -Number: 2x drive unit available -Price: per unit -Dimensions: 475/240/H140 mm -Weight: 12.4 kg/pc.

Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane undercarriage, crane undercarriage, trolley -Manufacturer: Abus, electric chain hoist without hand control -Type: GM5 load capacity 1000 kg -Main stroke: 6.0 m/min -Fine stroke: 1.5 m/min -Chain length: 3.5 m -Transport dimensions: 570/390/H330 mm -Weight: 46 kg

for glass scale, scale, digital display, measuring rod, length measuring system, linear scale, fluorescent display, glass scale, scale, length measuring device, linear scale, positioning display, digital scales, digital scale -Manufacturer: RSF Elektronik, digital display from coordinate measuring machine Stiefelmayer C 100 413514 -Type: Z 735M -Dimensions: 275/120/H170 mm -Weight: 3.4 kg

Frequency converter, frequency inverter, drive converter, controller, variable speed drive, converter, inverter -Manufacturer: Schneider Electric, frequency converter Altivar 630 -Type: ATV630D90N4 -Power: 90 kW -Input: 380-480V / 50/60Hz / 156 A -Output: 380-480V / 0-500 Hz / 173 A -Number: 2 frequency converters available -Price: per piece -Dimensions: 800/290/325 mm -Weight: 55 kg/piece

Frequency converter, frequency inverter, drive converter, controller, variable speed drive, converter, inverter -Manufacturer: Schneider Electric, frequency converter Altivar 630 -Type: ATV630D55N4 -Power: 55 kW -Input: 380-480V / 50/60Hz / 97.2A -Output: 380-480V / 0-500 Hz / 106 A -Quantity: 1 frequency converter available -Price: per piece -Dimensions: 800/290/325 mm -Weight: 54 kg/piece

Frequency converter, frequency inverter, drive converter, controller, variable speed drive, converter, inverter -Manufacturer: Schneider Electric, frequency converter Altivar 32 -Type: ATV320U30N4B -Power: 3 kW -Input: 380-500V / 50/60Hz / 11.1A -Output: 380-480V / 0-599 Hz / 7.1 A -Number: 2 frequency converters available -Price: per piece -Dimensions: 320/60/H230 mm -Weight: 2.1 kg/piece

Frequency converter, frequency inverter, drive converter, controller, variable speed drive, converter, inverter -Manufacturer: Schneider Electric, frequency converter Altivar 32 -Type: ATV320U11N4B -Power: 7.5 kW -Input: 380-500V / 50/60Hz / 5 A -Output: 380-480V / 0-599 Hz / 3 A -Quantity: 1 frequency converter available -Dimensions: 320/45/H230 mm -Weight: 1.7 kg

Servo motor, electric motor, DC motor, servo geared motor, synchronous motor -Manufacturer: SEW-Eurodrive, servo geared motor with brake -Type: WF37 CMP50M/BK/DI/PK/AZ2Z/SD1 -Motor: Speed: 4500 / max: 9000 rpm -Gearbox: i= 18.94 -Shaft: Ø 20 x 40 mm -Protection class: IP65 -Brake: 2.4 Nm -Technical data: see photo of the nameplate -Number: 7x geared motors available -Price: per piece -Dimensions: 455/180H170 mm -Weight: 10.5 kg/pc.

Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: Schneider Electric, Power Supply -Type: ABL 2REM24045H -Input: 100-120V/200-240V -Output: 24V / 100W -Number: 2 modules available -Price: per piece -Dimensions: 165/100H40 mm -Weight: 0.5 kg/pc.

Servo motor, electric motor, DC motor, stepper motor, compact asynchronous motor -Manufacturer: SEW Eurodrive, DC geared motor type ECG-A2M-09-A-K0 -Voltage: 24V -Translation: 9 -Shaft: Ø 16 x 25 mm -Technical data: see photo of the nameplate -Quantity: 42x motors available -Price: per piece -Dimensions: 230/50/H50 mm -Weight: 1.3 kg/pc.

Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed, lowering column -Manufacturer: Nucleus, Absen column 35 for ultrasonic welding machines -Eco FR361101 -Servo motor: Dunkermotoren GR 42x40, voltage 24 V -Receiver: Shaft Ø 20 x 18 mm see photo -Number: 4x lowering unit available -Price: per piece -Dimensions: 250/220/H85 mm -Weight: 2.3 kg/pc.

Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, fixings, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: 10 pieces, for machine tools and systems -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 440/210/H255 mm -Total weight: 24.4 kg

Servo motor, electric motor, DC motor, stepper motor, compact asynchronous motor -Manufacturer: SEW Eurodrive, DC geared motor type ECG-A2M-09-A-K0 -Voltage: 24V -Translation: 9 -Shaft: Ø 16 x 26 mm -Technical data: see photo of the nameplate -Quantity: 1x motor available -Dimensions: 230/48/H48 mm -Weight: 1.2 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter -Manufacturer: Alada Electric, frequency converter -Type: ALD2000V ALD2400V02D2/P04D0R1 -Input: 3PH 380V 50/60 Hz -Output: 3PH 380V V2.2/P4.0kW 0.1-320Hz -Number: 1x inverter available -Dimensions: 140/70/H155 mm -Weight: 0.9 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter -Manufacturer: Alada Electric, frequency converter -Type: ALD2000V ALD2400V01D5/P02D2R1 -Input: 3PH 380V 50/60 Hz -Output: 3PH 380V V2.2/P2.2kW 0.1-320Hz -Number: 2x inverters available -Price: per piece -Dimensions: 140/70/H155 mm -Weight: 0.9 kg/pc.

Wire electrode, aluminum welding wire, aluminum welding rod made of aluminum-magnesium alloy -various manufacturers: -7x Elisental 1.2 mm SG-AlMg5 -1x MTC 1.0 mm AlMg5 -6x ALCAN 1.2 mm S-ALmg 5 -1x Thyssen 1.2 mm AlMg4.5Mn -Weight: 7 kg/roll Price: per piece

General SKU311X477 MakeEllerwerk Type936H cGMP No.02.059 Year of construction2002 LocationBarneveld Main Features MaterialStainless steel Motor18.5 KW Inlet diameter50 mm Specified Features - Peeling centrifuge Peeler centrifugecheck Capacity96 l. Basket sizesø 900 x 400 mm Wall thickness13 mm Max. loading weight150 kg Motor18,5 kW, 380/400 volt, 1470 rpm Max. basket speed1600 rpm With scrapercheck With hydraulic unitcheck Motor0,75 kW 380 V 1390 rpm InletDN 80 Solids outletDN 150 Liquid outletDN 100 MaterialStainless steel 2.4605 (Alloy 59) Information Mounted on foundation platecheck Floorspace2,37 x 1,85 m Total height2,90 m Weight7880 kg CEcheck Extra Specifications Application: Filtration (not sedimentation) Centrifugal factor at max speed: 1280 g Max loading (permissible drum load): 150 kg Filter area: 1.13 m² Max product temperature: +80 °C ...

Saw blade diameter vertical: 550 mm Saw blade diameter horizontal: 500 mm Max. profile height: 250 mm Max. feed: 830 mm Digital angle displays for material stop and tilting of both sawing units Pneumatic material tensioners Minimum quantity spraying device Hydropneumatic saw blade feed via 2-hand operation Weight: 1,000 kg

-Metal Detector -Manufacturer: S+S Separation and Sorting Technology GmbH - Type: Ecoline 750/300/100 -Mains voltage: 230 / 115 VAC - Frequency: 50/60 Hz

cutting diameter: 305 mm capacity 90 degrees: flat: 350 x 200 mm capacity 45 degrees: round: 250 mm capacity 45 degrees: flat: 230 x 200 mm capacity 60 degrees: round: 175 mm capacity 60 degrees: flat: 170 x 100 mm cutting speed: 18 - 110 m/min vice: max. 350 mm dimensions of saw-band: 3370 x 27 x 0.9 mm engine output: 1.5 / 1.8 kW weight of the machine ca.: 880 kg range L-W-H: 1700 x 2200 x 2000 mm Equipment: - robust, electro-hydraulic fully automatic band saw - user-friendly controls - Mitre cuts left to 45 . possible in automatic mode - Mitre cuts up to 60° . only possible in semi-automatic mode - Hydraulic power unit with automatic . pressure cut-off when idling - Stationary base frame with large chip drawer and automatic cooling system - infinitely variable saw blade speed adjustment (ESC) - rotating chip brush - remnant min. 80 mm - operating instructions (PDF) The data for  ...

Overview This filler was manufactured in 2016 by CIMEC and comes with an Arol crown capper. The filler has an output of 1,800 bottles per hour, processes bottle sizes from 0.33 l to 0.75 l and is in very good condition. The machine can be viewed in person at any time. Technical details  Filler | CIMEC | AM DPS 9-8-1C | 2016 Output: 1,800 bottles/hour Number of rinsing nozzles: 9 Number of filling valves: 8 Bottle sizes included: 0.33 l - 0.75 l (with other set also 0.5 l) Electrical power: 6 kW, 400V, 50Hz Dimensions Width: 1,400 mm Length: 3,200 mm Complete length with labeler: 8,800 mm Operating hours: 1,370 hours Complete documentation available Capper | Arol | TSI-Eagle C | 2016 Pitch diameter: 410 mm Number of heads: 1 Type of closure: Standard crown cork Complete documentation available

AVIAN Engineering Grinder G46/ 60, refurbished 2003 Consisting of :- Driven Infeed Pinch Rollers Main Motor 20 kW Blower Motor 2 kW Rotary Blade 6pcs Stationary Blade 4pcs Through-Put 300 KG/H Cutting Chamber 620 x 460 mm Hopper Opening 620 x 500 mm, With Blower Good Production Condition. EXW our Warehouse Enger, Germany

Size: 2000 x 950 mm Equipments: Electric Modular Dryer Forced Hot Air System dimension 3800 x 1250 x 2170 mm POWER 15 kW 27 A weight 650 KG

An automatic single-head underfloor saw Emmegi including a chip extraction system is available. Cutting angle: 90°, feed travel: 0mm-1000mm, positioning accuracy: +/-0.5mm, saw blade diameter: 500mm, motor power: 6.6kW, weight: approx. 1000kg. An on-site inspection is possible.

Fan / blower from ABB Solyvent-Ventec design 90 degrees m³/min 367 mm Water column 800 Power kw 75 Suction diameter 550 mm Output 480 x 360 mm Good condition, test run carried out

General SKU300U900 MakeDott. Bonapace LocationBarneveld CEcheck TypeMC-50 Main Features MaterialStainless steel Specified Features - Powder filler MaterialStainless steel 1.4401 (316) Powder fillercheck Information No.01/04 Year of construction2004 With switchcheck Floorspace0,65x0,33 m Total height0,39 m Weight70 kg Extra Specifications50 cycles, Multigel vibrator unit, type MC100, 230 volt comes with :various plates. Powder fillersGeneric medicinesDott. BonapacePackaging machines > Powder fillersIndustries > Pharmaceutical > Generic medicinesBrand > Dott. Bonapace What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Brand SEW Eurodrive Type R07 DR63L4 TF AND8 Voltage Volt 3 fase 400 volt Force KW 0,25 KW Rotational speed RPM 405 RPM Shaft size mm Units in stock 1 Length 35.00cm Width 18.00cm Height 15.00cm

Brand SEW Eurodrive Type RF07 DT56L4/AND8 Voltage Volt 3 fase 400 volt Force KW 0,12 KW Rotational speed RPM 284 RPM Shaft size mm 20 mm Flens pasrand 80 mm Units in stock 1 Length 30.00cm Width 20.00cm Height 10.00cm All employees speak Dutch, German, and English. Prices are exclusive of VAT. Shipping is possible (for an additional charge). (Changes and errors in technical data, information, and prices as well as prior sale are reserved.)

Carriage length: 3200 mm; Cutting width at the width stop: 1300 mm; Cutting width at cut-to-length fence: 3200 mm; Cutting depth: 145 mm; Scorer: no; Height adjustment saw blade: electric; Swivel adjustment saw blade: electric; Width stop adjustment: electric; Adjustment of cut-to-length stop: manual; Display Saw Blade Angle: Digital Display; Display cutting height: -; Display Width Stroke: Digital Display; Display cutting ruler: Scala; Saw blade diameter: 450mm; Speeds: 4; Motor power: 5.5kW; Suction port: 80 and 120mm; Machine length: 4000mm;

Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed, lowering column -Manufacturer: Nucleus, Absen column 35 for ultrasonic welding machines -Eco FR361101 -Servo motor: Dunkermotoren GR 42x40, voltage 24 V -Receiver: Shaft Ø 20 x 18 mm see photo -Dimensions: 270/230/H85 mm -Weight: 2.5 kg

General SKU020A140 MakeAlfa Laval TypeContherm 6x4 No.HC-288 Year of constructionunknown Mounted on framecheck Main Features MaterialStainless steel Motor4 KW Surface0.4 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel Scraped surface heat exchanger(1x) Heating surface0,37 M2 (4 Square Feet) Cylinder sizesdia. 152mm (6 Inch) With jacketcheck Motor4,0 KW, 380 Volt With variable speed drivecheck Information LocationBarneveld Floorspace1,2x0,9 M Total height1,8 M Technical specs Extra informationcylinder size: 152 mmDiscountScraped surface heat exchangersAlfa LavalDiscountHeat exchangers > Scraped surface heat exchangersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in  ...

General SKU034G143 LocationBarneveld MakeAlfa Laval TypeContherm 6x3 No.HC-4844 NCC + HC-1802 NCC Material Product contact materialStainless steel Pressure Working pressure20 Bar Working pressure jacket17.2 Bar Main Features MaterialStainless steel Motor7.5 KW Surface0.279 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel Scraped surface heat exchanger(1x) Heating surface0,279 m2 each With jacketcheck Motor2x 7,5 KW, 415 Volt Speed177 Rpm Information Year of construction1992 / 1982 Mounted on framecheck With switchcheck Floorspace1,3x1,0 M Total height2,0 M Technical specs Extra informationworking pressure 20 bar (300 PSI) / 31 bar (450 PSI): jacket working pressure 15,5 to 17,2 barDiscountScraped surface heat exchangersAlfa LavalDiscountHeat exchangers > Scraped surface heat exchangersBrand > Alfa Laval What you can expect from  ...

EPPENDORF 5702 Laboratory Centrifuge with A-4-38 Rotor Model No.: 5702 Type: Non-Refrigerated Centrifuge Dimensions: 24x58x32 cm Maximum g-force: 3000 rcf Speed Range: 100-4400 RPM Power: 240 V, 50/60 Hz, 200 W Oscillating bucket rotor A-4-38 4 cylindrical pods of 85 ml With 2 adapters 5702724009 for 4 tubes with a diameter of 17.5mm (9 to 15ml) With 2 adapters 5702719005 for 4 tubes with a diameter of 13.5mm (2.6 to 7ml) Tested at 3500 RPM Year of Manufacture: 2006

General SKU031H069 MakeAPI Schmidt-Bretten TypeSigma X49 SCL No.PA-087714 Year of construction2005 LocationBarneveld Pressure Working pressure10 Bar Main Features MaterialStainless steel Surface146.8 m2 Size length1100 mm Sizes width400 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4301 (304) Plate heat exchangers(1x) Heating surface146,8 m2 Capacity142/143 Ltr Number of platens360 Plate sizes± 1100x400mm Connections4x dia. 100mm Max. temperature100 Degr. C. Capacity900 KW Information Floorspace2,5x0,8 M Total height1,6 M Weight1500 KG Extra Specificationssealing material NBR Technical specs Extra informationindicated size is platen size, capacity is 900 KWDiscountPlate heat exchangersApi SchmidtDiscountHeat exchangers > Plate heat exchangersBrand > Api Schmidt What you can expect from Foeth: -- Machine is in working condition -- A ...

General SKU031H071 MakeAPI Schmidt-Bretten TypeSigma X49 SBL No.PA-90136 Year of construction2006 LocationBarneveld Pressure Working pressure10 Bar Main Features MaterialStainless steel Surface90.2 m2 Size length1100 mm Sizes width400 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4404 (316L) Plate heat exchangers(1x) Heating surface90,2 m2 Capacity86/87 Ltr Number of platens222 Plate sizes± 1120x400mm Connections4x dia. 100mm Max. temperature100 Degr. C. Capacity700 KW Information Floorspace1,7x0,6 M Total height1,6 M Weight875 KG Extra Specificationssealing material NBR Technical specs Extra informationindicated size is platen size, capacity is 700 KG: platen sizes: 400 x 1120 mmDiscountPlate heat exchangersApi SchmidtDiscountHeat exchangers > Plate heat exchangersBrand > Api Schmidt What you can expect from Foeth: -- Machine is i ...

General SKU345S750 MakeNantong sunshine graphite equipment technology TypeHeat exchanger No.2016458 Year of construction2016.6 LocationBarneveld Pressure Vacuum possiblecheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes3.2 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Surface1.95 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface1.95m² Tube capacity4,6Ltr. Tube diameter±10mm Tube length±700mm and ±200mm Max. temperature-30/200°C Shell capacity3,3Ltr. Shell length710mm Max. temperature-30/200°C Shell connectionsDia: 45mm (2x) Cover connectionsDia: 80 (2x) MaterialGraphite Information Floorspace0,45x0,4m Total height2,15m Weight250kg CEcheckCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat e ...

General SKU212U086 MakeAlfa Laval LocationBarneveld CEcheck Type3H-C-1T Pressure Vacuum possiblecheck Working pressure shell10 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface98 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4404 Heat exchangerspiral Horizontalcheck Heating surface98 m² Tube capacity705 Ltr. Number of tubes:1 Wall thickness tubes2 mm Max. temperature0/100 °C Shell capacity1255 Ltr. Wall thickness shell2 mm Max. temperature0/100 °C Shell connectionsDN250, DN100 Cover connectionsDN100 (2x) Capacity830.8 kW Information No.21965 Year of construction2002 Mounted on legscheck Floorspace1,85x1,3 m Total height1,85 m Weight4100 kgCatalysts & fillersFeed additivesPaper & otherSolventsS ...

General SKU338T911 MakeSchrader apparatebau GMBH LocationBarneveld Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell10 Bar Vacuum possible shellcheck Working pressure tubes100 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface2.75 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4571 (316Ti) Heat exchangercheck Verticalcheck Heating surface2,75 m² Tube capacity24 Ltr. Number of tubes:14 Tube diameter25 mm Tube length2500 mm Wall thickness tubes1,6 mm Max. temperature140 °C Shell capacity34 Ltr. Shell diameter218 mm Shell length2500 mm Wall thickness shell4 mm Max. temperature140 °C Shell connectionsDN 40 (2x), R3/8 Cover connectionsDN 25 (2x) Information No.2180 Year of construction1996 Floorspace0,5x0,5 m Total height3, ...