used Shrinking units for sheets for sale

Shrink sleeves tunnel, for shrinking sleeves. completely overhauled! YOC 2002 Manufacturer: ARCOR GmbH, Power up to 6000 units per hour. If you have any further questions, please do not hesitate to contact us

Packaging machine Beck Fitpacker Junior FJ 1040 U - Used equipment built in 1995 - small repairs necessary The Fitpacker Junior has a high packing performance and can process products of different lengths in disorder. A programmable logic controller is located at the top of the control cabinet and is easy to handle via a logical user interface. The packer also has a feeding system, which is especially suitable for line operation. Machine changeover times are kept short by a digital operating concept and an adjustable shape shoulder. The control cabinet can be opened and swivelled so that optimal access is guaranteed in the event of maintenance and downtimes are reduced. The film roll holder is mounted at an ergonomically reasonable working height. Working speed: Actual production speed and effective net output depend on format, Type and composition of products and can ...

Item condition: Top maintained Availability: as of now 20 packs/min Standard basic equipment - KV 600 HP online Direction of movement of the packaging line from left to right; Right-hand side Inlet and outlet belt belt, built-in: - for the automatic transfer of goods in line - Equipped with separately switched drive motors - If required, with laterally adjustable guides Film roll holder for top and bottom film: - Motor-driven support bearing block - Max. film roll diameter: 250 mm - Controlled film take-off - Centrally adjustable side guides of the film rolls Permanently heated transverse welding system: - working pneumatically; Air consumption approx. 140 NL/min. at 6 bar, dry and oil-free Machine: - Siemens S7; Simatic Touch Panel - Display of operator information, machine status and error messages - 2-fold piece counter; Hour meter Control panel - Control co ...

Mobile semi automatic L-Shrinking machine incl. tunnel, suitable for single or multiple products. The shrinking process of the film can be realised at the same time as the cutting process and is achieved by circulating hot air around the packaging.

Power: 30 cycles / min. Set up to handle the following formats: 6 x 0.5l shrink pack (3 six-packs on tray) 6 x 1,0l shrink pack (2 six-packs on tray) 6 x 1,5l shrink pack

Condition: Used Capacity: 300 - 600 packs /h Product length: min. 110 mm / max. 630 mm Product width: min. 25 mm / max. 410 mm Product height: min. 5 mm / max. 380 mm Tunnel dimensions: width x height in mm 850 x 450 Power consumption: 17 kW

Machine: Foil shrink tunnel of lime barrel for product packaging Product no.: 5201 Manufacturer: Kallfass Type: Super Wrap 650 Year: 2010s Description: Used film shrink tunnel / film packaging machine from the manufacturer Kallfasss in very good condition. 4 are available. Please inquire directly here: Paptec Reuter Industrieservice GmbH Hermann - Metzger - Strasse 1/2 88045 Friedrichshafen Germany Phone: +49 (0) 7541 592768 +49 (0) 7541 978868 10 - 14 Whatsapp: +49 151 65188844 Fax: +49 (0) 7541 5927 69 E-mail: infopaptec.com

Kallfass Universa 400 with shrink tunnel, SlipTorque roller belt and conveyor belt Kallfass Universa 400 built in 2005 The system is immediately available. The price of the complete system includes the Universa 400, the Schlichter shrink tunnel, a SlipTorque roller belt and a conveyor belt. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - Metronic embossing system - Control: Siemens S7-300 - Siemens Touch TP277 operator terminal - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel-knife system - Processable films PE and PO - Year of construction 2005 - Simple shrink tunnel DS-600 with switchable rotating bars - Conveyor belt 1000 x 400mm - SlipTorque roller conveyor 2 ...

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 Year 2006 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Control: Siemens S7-300 - Operating terminal with Siemens touch panel - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel knife system - Processable films PE and PO - Year of construction 2006 - Kallfass Compact 450 SO shrink tunnel - Gripper section with inline belt - Book magazine on gripper section - Ionization for blocking loose leaves - Cur ...

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 NT Year of construction 2003 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Side sweat monitoring - Foil holding plate Pwq9ya - Control: Siemens S7-300 - Operating terminal with Sütron BT20 - Welding punch with replaceable welding strip - Side welding wheel-knife combination, can also be exchanged for a knife system - Processable films PE and PO - Year of construction 2003 - Shrink tunnel Kallfass Standard - Gripper section with inline belt - Curved band can be ...

Meurer Machine type: CM/HBB40-T80 Built :2000 V:400/230 Kw:19

automatic, angle welder CMW/AL 80/60 with shrink tunnel CMS 60 - used - : Prices from location: 5.950.-€ (net) Manufacturer: Meurer Automatic angle welder CMW/AL 80/60 with shrink tunnel CMS 60 Year of construction 1996 Machine No.: 4.0514.04.96 Type plate shrink tunnel: Type: CMS 60 Angle welders: CMW/AL 80/60 The product may have the following maximum dimensions: 80 cm x 60 cm x 20 cm height. Output: Average 3000 pieces/hour The first part of the machine welds the film and the second part (the shrink tunel) makes the film smooth. Depending on the characteristic and size of the items, you can adjust the speed, quality of the welding and smoothness of the film. The control module and placed over the infeed belt (left part of the machine). Condition: good, but existing errors: Film processing must be accompanied manually because a spare part for automation is not av ...

Mobile strech bander suitable for grouping + banding of folding boxes asn. Output: up to 40 bundles / min. PLC: Siemens S5.

Pester PEWO pack 250 compact HS and Therm 250 - Balcony construction with free access to the work area Film storage - Thorn bearing with pneumatically opening spring pressure brake Closing unit Closing unit -Closing beam driven by servo motor and crank drive Sealing unit - low-wear sealing system thanks to steel sealing beams with precise temperature monitoring Plant features: - Operating side on the right - Lauer PCS control panel (standard) - Standard cladding in acrylic glass - Machine design degree of protection IP54 - Control cabinet for pack Compact - Voltage 3x400V+N+PE, 50 Hz/60 Hz - Control Elau PacDrive MAX-4 - Traffic light display in three-colour standard version - Electric standard version - Pneumaticstandard version - Pluggable proximity switch IFM (standard) - Model PEWO-therm III 250 mounted in line - For thermal side shrinkage ...

Pester Pewo Pack 450 more information on request

Pester Pewo pack 450 compact

Film wrapping machine with infeed conveyor, stacking device, outfeed conveyor with 90° curve and other outfeed conveyor 90° to the machine. PLC: SCHNEIDER. Output: 60 bundles/min.

Foil shrink gun Shrink gunHand shrink gun Manufacturer Ripack Type 2000 Functioning: The packaged goods to be packed are, for example, coated with a polyethylene film as a shrink hood. After overputting, the film is heated with the Ripack 2000 hand-shrink gun. As a result, the film surch shrinkage forms to the packaged goods. A slipping on the pallet is prevented daurch! The goods are thus also protected against contamination and moisture. Special price

composed of: Belt infeed belt: • Type: FAG 500-1500 • Width 500 mm • Barrel length 1,500 mm • Speed approx. 25m/min • Working height 850+-50 mm • Power approx. 0.5 kW Film welding machine: • Type: SWS 5020 • Machine size (LxWxH): 2103 x 15653 x 1410 mm • Max product size (lxW): unlimited x max 480 mm • Welding punch width: 500 mm • Passage height: 220 mm • Conveyor belt speed: 35m/min • Film width: max. 650/650 mm • Film diameter max 300 mm • Connection 16A connector, 3ph 380 V • Transverse welding servo motor • Longitudinal welding pneumatic • Working height 850 mm Shrink tunnel: • Type: STA-45 30 • Dimensions: 1.840L x 1080 W x 1250 H mm • Tunnel opening: 1200 L X 450 W X 300 H mm • Product size max: 1700 L x 400 W x 250 H mm • Conveyor belt speed 10-40/min • Weight 520 kg • Working height 850 mm • C ...