4470 offers

maximum number of results exceeded > 1000
please refine your search

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-de DE 68199 Mannheim, Altriperstr. 31
Seller: Jens Kürschner Maschinenhandel

Rapid radial drilling machine Danube DR 32 45-2240 Rev/min 1.5/2,2KW 4 feeds 0.075 0.15 0.30 0.45 mm / Rev The offer is aimed exclusively at Gewrbtreibende in the sense of § 14 BGB No sales to private!

Category: 102: lathes
New in: 2014
Price: request quote
Location: Weltweit
Seller: Stiens Werkzeugmaschinenhandelsgesellschaft mbH

turning diameter: max. 200 mm turning length: max. ca. 390 mm control: C 200 4D sl (840 D sl) Main spindle:: Max. rpm: 5.000 min/-1 power capacity - main spindel: 20 / 24 kW max. Torque: 135 / 190 Nm spindle diameter in front bearing: 110 mm spindle bore: 85 mm spindle passage: 65 mm usable bar diameter: 65 mm spindle nose: D 140 ISO 702/1 C-Axis: 0,01 ° max. chucking diameter: 175 mm Subspindle:: Max. rpm: 5.000 min/-1 power capacity - Sub spindle: 20 / 24 kW max. Torque: 135 / 190 Nm spindle diameter in front bearing: 110 mm spindle bore: 85 mm spindle passage: 65 mm usable bar diameter: 65 mm spindle nose: D 140 ISO 702/1 C-Axis: 0,01 ° max. chucking diameter: 175 mm Milling Spindle:: ...

Category: 1009: excavators
New in: used
Price: 2.900 €
Location: Land-de DE 88374 Hoßkirch, Hubertushöhe 1
Seller: BECHINGER S.A.R. GmbH

Excavator buckets / rock bucket, very stable, unused The geometry corresponds to a Fang, the tooth holder / cutting edge is rounded, this high performance, grave. Bucket width: 1500 mm Bucket volume: 1 m 3 (piled) base plate for quick coupler: 520 mm (width) x 640 mm (depth) Excavator size: 18-30 to use weight

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 89 €
Location: Land-it IT Italy, 25011 Zona Industriale di Calcinato
Seller: Surplex GmbH

Weight approx.: 10 kg Dimensions (l x w x h) approx.: 350 x 350 x 700 mm Description: Pressure 115-150 bar, flow rate 5.5 - 7.3 l/min, consumption 2200W, cold water, see photos

Category: 102: lathes
New in: 2007
Price: request quote
Location: Land-de DE Offenburg
Seller: Andreas Zobel Werkzeugmaschinen

Clamping fixture main and sub spindle double foot switch with protection cover for main and sub spindle tool holder CAPTO C5 for Rotary Milling spindle chain tool magazine with 40 spots increase the possible Indexing B-axis to 0,0001° I/F for high pressure coolant system 70 bar compressed air exhaust system for Chuck (HS) and tool cutting (turning-milling spindle) chip conveyor part catcher part conveyor belt AGW revolver 2 bar loader interface tapping without Compensating Chuck transformer Knoll high pressure system

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 89 €
Location: Land-it IT Italy, 25011 Zona Industriale di Calcinato
Seller: Surplex GmbH

Weight approx.: 10 kg Dimensions (l x w x h) approx.: 350 x 350 x 700 mm Description: Pressure 115-150 bar, flow rate 5.5 - 7.3 l/min, consumption 2200W, cold water, see photos

Category: 101: boring mills and machining centers
New in: 2009
Price: request quote
Location: Land-de DE Offenburg
Seller: Andreas Zobel Werkzeugmaschinen

spindle unit with Tool holder BT40 Tool magazine with 61 spots Workpiece measurement Renishaw taster direct measuring system in the X -, Y - and Z-axis chip conveyor I/F for coolant system and Knoll load monitoring function Knoll high-pressure system documentation (if applicable)

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 89 €
Location: Land-it IT Italy, 25011 Zona Industriale di Calcinato
Seller: Surplex GmbH

Weight approx.: 10 kg Dimensions (l x w x h) approx.: 350 x 350 x 700 mm Description: Pressure 115-150 bar, flow rate 5.5 - 7.3 l/min, consumption 2200W, cold water, see photos

Category: 102: lathes
New in: 2011
Price: request quote
Location: Land-de DE Offenburg
Seller: Andreas Zobel Werkzeugmaschinen

2-axis CNC lathe chuck set 8 " high pressure coolant pump 5 bar hinge belt conveyor discharge right

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 89 €
Location: Land-it IT Italy, 25011 Zona Industriale di Calcinato
Seller: Surplex GmbH

Weight approx.: 10 kg Dimensions (l x w x h) approx.: 350 x 350 x 700 mm Description: Pressure 115-150 bar, flow rate 5.5 - 7.3 l/min, consumption 2200W, cold water, see photos

Category: 102: lathes
New in: 2015
Price: request quote
Location: Land-de DE Offenburg
Seller: Andreas Zobel Werkzeugmaschinen

4-axis universal lathes with driven tools Y and C axis chuck set 10 " chip conveyor eject to the right coolant pump with increased pressure (5 bar) Bar loader interface, part catcher, signal lamp, milling of pockets and Islands High speed cycles

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 85 €
Location: Land-de DE Germany, 79677 Schönau
Seller: Surplex GmbH

Weight approx.: 15 kg Dimensions (l x w x h) approx.: 700 x 200 x 120 mm Description: Diameter from 1.5 mm with spare head piece various plate mounts for grinding devices plishing pins

Category: 107: sheet metal working
New in: 2012
Price: request quote
Location: Land-de DE 61352 Bad Homburg, Spessartstr. 40
Seller: tuerer machinery brokers & consulting

REF.-No. 00474 Designation of 3D water jet machine plant manufacturer flow Model M4-4020b Year 2012 Workspace 4000 x 2000 mm dynamic waterjet XD - phases and 3D cuts up to 55 ° without taper - cut 2D and 3D components with tight tolerances at high speeds laser pointer laser unit with a clearly visible Red Cross to align and Positioning Flow Hochdruckpume 50i-S - 4150 bar / 37kW (50PS) / 3.8 l / min High pressure pump H50i-S Dynamic waterjet XD Cooling system Abrasivbehälter flow UltraPIerce drilling of glass and stone revisions invested: X axis spindle 6878 euro servo motors actuator Aug made new 2016 5540 euro technical condition good deadline for agreement in the short ter ...

Category: 108: welding machines
New in: used
Price: request quote
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Wire electrode, SG2 welding wire, welding wire -Grossrolle Wire thickness 1.2 mm Wire electrode high-alloy, chemically resistant -4x rolls available Price per package -Weight 12 kg

Category: 301: injection moulding machines
New in: 2011
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

Angel e-max 310/100 / electric motor / in perfect technical condition Year of construction: 2011 Injection unit: Screw diameter: 35 mm Shot weight: 140 g Injection pressure: 2000 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 100 t Tie bar distance: 460 x 410 mm Clamping plate sizes: 650 x 600 mm Ejector: electric Clamping unit: knee lever Control: CC 300 - touch screen Additional equipment: Machine in perfect condition, as new Year of construction: 12.2011, the machine was purchased but in 2012 Machine is completely electric, works very quiet, power-saving High speed machine Steueurng with core pulling Control with Heiskanälen Air valve x 1 Paralle ...

Category: 706: beverage machines
New in: used
Price: request quote
Location: Land-de DE
Seller: VBW Asset Trade Weihenstephan GmbH

Capacity: 120 - 250 hl/h Measuring range: 020 °Plato (ultra sonic) CO2-content: 3 - 5,5 g/l Operation / control: Fully automatic / Simatic S7 equipment: Carbonation pump, membran water degassing unit, chiller, high pressure pump, plug-in construction with 2x 6 static mixer, original wort content is adjusted via original wort measurement (ultrasound) and soft controller

Category: 301: injection moulding machines
New in: 2002
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

De MAG Ergotech El Exis E 60-200 / electric machine Year of construction: 2002 Injection unit: Screw diameter: 30 mm Shot weight: 100 g Injection pressure: 1911 bar Dispensing volume: 106 cc Clamping unit: Clamping force: 60 t Tie bar distance: 370 x 370 mm Clamping plate sizes: 600 x 600 mm Ejector: electric Clamping unit: knee lever Control: NC 4 Additional equipment: The high-speed, energy-saving and quiet working machine EUROMAP 12 Robot interface Hydraulic core pulling x 1 Air valve x 2 Injection unit cured - bi Central lubrication system Parallel movements Dimensions: Weight: 6500 kg Length/width/height: 4.2 x 1.4 x 1.9 m Price: On request

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

doughhopper contains ca. 300 kg dough \r\ntransport high ca. 1900 mm\r\n

Category: 303: blow moulding machines
New in: 2005
Price: request quote
Location: Land-de DE
Seller: GloCon TST GmbH

Premium stretchblow machine for production of approx.28.000 PET-beverage bottles/hour, in excellent, impeccably maintained condition (maintenance log), inspection date on agreement. Set up to blow preforms with PCO1881-neck finish. Has been upgraded with AIRBACKplus® air recovery systems in 2014 to reduce high-pressure air also resulting in reduced kWh-consumption and downsized compressor.

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

doughhopper contains ca. 600 kg dough\r\ntransport high ca. 1900 mm\r\n

Category: 1014: formworks
New in: used
Price: 14 €
Location: Land-at AT 5202 Neumarkt am Wallersee
Seller: Berger International

Safety railing clamp for screwing Safety on every structure These tried-and-tested systems give your site crew optimum protection and make a significant contribution to a smooth workflow. When the crew are properly protected, they work safely, which also means more rapidly and thus more efficiently – for your success. Doka handrail posts provide comprehensive safety • against fall hazards • on the structure and the formwork • thanks to their high quality (hot-dip galvanised) • conform to EN 13374 Class A Convenient and easy to mount Multi-functional as they can be used in many different situations ? maximum safety with easy assembly ? no squared timber waste

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

doughhopper contains ca. 600 kg dough\r\ntransport high approx. 1900 mm\r\n

Category: 101: boring mills and machining centers
New in: new
Price: 2.285 €
Location: Land-de DE
Seller: Czech Industrie Service

Gr. Bohrlstg. in St: 25 mm Gr. Gewindeschneidlstg. in St.: Max 12 M Table size: 400 x 320 mm Speed range: 80 - 1600 rpm - infinitely variable Spindle retainer: MK 3 Stroke: 110 mm Throat depth: 230 mm Spindle nose - foot distance: 1180 mm Column diameter: 100 mm Total power consumption: 0.7 KW / 1.3 KW / 400 V Machine weight: 250 kg Machine dimensions: 820 x 530 x 1715 mm Equipment / Accessories: Thread cutting function Digital speed display stepless speed control Keyless chuck 3-16 mm processed baseplate Pole-reversible motor high concentricity accuracy less than 0.02 mm precisely adjustable drill depth stop Working table on rack and hand crank height adjustment ro ...

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

running time variable 13 - 26 Min.\r\ninfeed low, outfeed high\r\n11 tiers, distance between the tiers approx. 200 mm\r\ngap between the tiers approx. 145 mm\r\nAshworth stainless steel belt, type: Omni - Grid 100\r\nbelt cleaning at the outfeed by presure air\r\nonly used approx. 4 h for trials \r\nmotors/gearbox are new or reconditioned, belt is new\r\n

Category: 102: lathes
New in: 2001
Price: request quote
Location: Land-de DE 75446 Wiernsheim, Rolf-Scheuermann-Str. 46
Seller: Wietec Björn Wied

used Cincom M216 installation 2003 with FMB barloader minimag 3200 Built in 2003 Facilities: â?¢ High pressure pump CL1 70 bar, 4 outputs â?¢ Spindle flushing, revolver with innercooling â?¢ Optional long parts with various pipes â?¢ Workpiece conveyor belt â?¢ Warning light yellow â?¢ LNS chipconveyor â?¢ Fire extinguisher Kraft & Bauer â?¢ Drill bit breakage detection â?¢ JBS flex. guide bush system â?¢ channels for barfeeder: D07/D13/D16 â?¢ Tool holder: â?¢ 3 x double drill holder VDF401 â?¢ 2 x drill holder VDF201 â?¢ 6 x drill sleeve/Collet holder â?¢ 2 x live tools in Z axis MSE106 â?¢ 1 x live tool in X-axis MST406 â?¢ 2 x turnin ...

Category: 101: boring mills and machining centers
New in: 2006
Price: request quote
Location: Nordrhein-Westfalen
Seller: Stiens Werkzeugmaschinenhandelsgesellschaft mbH

x-travel: 835 mm y-travel: 510 mm z-travel: 510 mm control: 840 D ShopMill Siemens Main spindle:: turning speed range - main spindle: max. 12.000 min/-1 power capacity - main spindel: 14 kW tool taper: SK 40 max. Torque: 100 / 74 Nm work table:: table surface area: 1.000 x 560 mm max. table load: 800 kg number of T-slots: 5 T-slot - width: 14 mm T-slot - distance: 100 mm Tool-Presetter:: number of toolpositions: 20 pos. tool taper: SK 40 max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 250 mm feeds:: rapid traverse ( X / Y / Z ): 30 m/min feed speeds: 1 - 20.000 mm/min total power requirement: 35 kVA weight of the machine ca.: 4,5 t dimensions of the ma ...

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-it IT 37066 Sommacampagna, Via Colombo 3
Seller: Officine Meccaniche Astra srl

Divider rounder Heavy duty, high output divider rounder machine with 6 rows, suitable for dividing and rounding dough, which undergoes further processing to obtain round, moulded, pita, pizza bread, hamburger buns and finger rolls

Category: 101: boring mills and machining centers
New in: 2000
Price: request quote
Location: Nordrhein-Westfalen
Seller: Stiens Werkzeugmaschinenhandelsgesellschaft mbH

x-travel: 600 mm y-travel: 560 mm z-travel: 560 mm control: Sinumerik 840D Siemens Main spindle:: turning speed range - main spindle: 1 - 8.000 min/-1 power capacity - main spindel: 13 / 20 kW max. Torque: 124 / 191 Nm Tool bore: SK 40 tool clamping: 12 kN pallet changer:: numbers of pallets: 2 pos. size of pallet: 400 x 500 mm max. palett load: 600 kg number of T-slots: 7 T-slot - width: 6x 14H12 / 1x 14H7 mm table turning speeds: max. 25,7 min/-1 tension force: 80 kN B-Axis: 0,001 ° tool magazin:: number of toolpositions: 40 pos. tool taper: SK 40 max. tool diameter: 90 mm max. tool-dia with free toolbox: 160 mm max. tool length: 350 mm max. tool weight: 10 kg max. total weight: 200 kg ...

Category: 702: breadmaking and confectionery machines
New in: 2012
Price: request quote
Location: Land-de DE 64832 Babenhausen, Industriestr. 11
Seller: bak-tec GmbH

Head machine Dough dividing and moulding machine Execution: From / SKG63 + RK64 Control: Plc, digital Warranty: 6 months on parts Head machine Dough dividing and moulding machine Execution: From / SKG63 + RK64 Control: SPS, digital The FUTURA version of the mini Rex has two different large stamp bars, with one machine you can cover a huge weight range. Advantages: - Hourly capacity: up to 4,000 pcs/h with 33 strokes/min - extended weight range by 2 off cradle stamp sizes - best work results over infinitely adjustable work eccentric - roller catchment funnel with approx. 15 kg dough capacity - 2-row operation - Industrial SPS-control with quick access buttons - plasti ...

Category: 103: milling machines
New in: used
Price: used machinery auction RESALE 280 €
Location: Land-de DE Germany, 79677 Schönau
Seller: Surplex GmbH

Weight approx.: 40 kg Dimensions (l x w x h) approx.: 570 x 250 x 370 mm Description: 10 places, 9 of them equipped with high-speed spindle, end mill, quick-action button, cutter head Face milling cutter

Category: 1014: formworks
New in: new
Price: 29 €
Location: Land-at AT 5202 Neumarkt am Wallersee
Seller: Berger International

EuroProp 20-350 eco, galv., new low dead weight allows for speedy work and conserves energy prop retains its value for many years thanks to high-quality production and galvanisation reliability in many applications due to high load capacity up to 36.7 kN optimised thread pitch allows for quick and safe release of fixed prop safe working conditions thanks to handtrapprevention and anti-drop-out latch Certificated EN 1965, produced in Europe.

Category: 1900: general inventory
New in: 2003
Price: used machinery auction RESALE 250 €
Location: Land-de DE Germany, 79677 Schönau
Seller: Surplex GmbH

Weight approx.: 50 kg Dimensions (l x w x h) approx.: 1200 x 800 x 700 mm Description: Working pressure 150 bar, permitted operating overpressure 165 bar, current type 400 V, 50 Hz

Category: 1014: formworks
New in: new
Price: 27 €
Location: Land-at AT 5202 Neumarkt am Wallersee
Seller: Berger International

EuroProp 20-300, galv., new low dead weight allows for speedy work and conserves energy prop retains its value for many years thanks to high-quality production and galvanisation reliability in many applications due to high load capacity up to 36.7 kN optimised thread pitch allows for quick and safe release of fixed prop safe working conditions thanks to handtrapprevention and anti-drop-out latch Certificated EN 1965, produced in Europe.

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 120 €
Location: Land-de DE Germany, 79677 Schönau
Seller: Surplex GmbH

Weight approx.: 60 kg Dimensions (l x w x h) approx.: 1200 x 800 x 900 mm Description: 1 x IGS ME-85.50, high-performance industrial vacuum cleaner, protection class IP-54, contents up to 60 l, air volume 6830 l/min, 1 x WEIDNER FLORIDA 2183, with accessories

Category: 702: breadmaking and confectionery machines
New in: 1992
Price: request quote
Location: Land-de DE
Seller: Peter Heidenreich Maschinenhandel

Many thanks for your interest on our second hand machines, please find follow our offer: Consistings off: manufacturer: Hastamat Type: R 250 (vertical form fill and seal machine VFFS ) YOM: 1992 /max foil: 520mm format size: wide 50-220 mm, length 60-350mm over all high: 2400mm different: 3 Formatsätze / 3 format sizes available scale manufacturer: Hastamat Type: 2 Rinnen Linearscale YOM: 1990 weigh range: max. 1000g, min. 15g. Output: up to 70/min. volume of Funnel: 3500ml different: Infeed belt, discharge belt We offer this machine in 'as is' condition, without warranty.

Category: 1900: general inventory
New in: 1979
Price: used machinery auction RESALE 90 €
Location: Land-de DE Germany, 49459 Lembruch
Seller: Surplex GmbH

Weight approx.: 120 kg Dimensions (l x w x h) approx.: 1400 x 650 x 1200 mm Description: 80 V, 6 kW, 18.1 l/min, 120 bar, max. temperature 155° C, incl. extension hose and hose with lance, 10 m each

Category: 1402: other machines for mechanical handling
New in: new
Price: 990 €
Location: Land-at AT 3130 Herzogenburg
Seller: IPV GmbH

New gas pressure regulator, Itron, DN50, RR16-50-54-12N-SL-IZN.1 Manufacturer: Itron Type: RR16-50-54-12N-SL-IZN.1 - DN50, PN16 - W DSO 35 mbar - 250 mbar Condition: The gas pressure regulator was purchased from a spare parts warehouse of a company and is still in its original packaging Dimensions: 43cm x 40cm x 85cm high Weight: 46 kg

Category: 103: milling machines
New in: used
Price: used machinery auction RESALE 350 €
Location: Land-de DE Germany, 79677 Schönau
Seller: Surplex GmbH

Weight approx.: 40 kg Dimensions (l x w x h) approx.: 130 x 430 x 150 mm Description: Jaw width 125 mm, clamping width 190 mm, in 4 detends

Category: 1402: other machines for mechanical handling
New in: new
Price: 990 €
Location: Land-at AT 3130 Herzogenburg
Seller: IPV GmbH

New gas pressure regulator, Itron, DN80, RR16-80-82-12N-SL-IZN.1 Manufacturer: Itron Type: RR16-80-82-12N-SL-IZN.1 - DN80, PN16 - W DSO 35 mbar - 250 mbar Condition: The gas pressure regulator was purchased from a spare parts warehouse of a company and is still in its original packaging Dimensions: 43cm x 40cm x90cm high Weight: 63 kg

Category: 1900: general inventory
New in: 1996
Price: used machinery auction RESALE 350 €
Location: Land-de DE Germany, 79677 Schönau
Seller: Surplex GmbH

Weight approx.: 90 kg Dimensions (l x w x h) approx.: 1050 x 1400 x 1400 mm Description: Combustion chamber dimensions 250 mm wide, 140 mm high, 400 mm deep, furnace control CONTROLER C 19, including 1 table with chamfering belt and immersion basket

Category: 107: sheet metal working
New in: 2004
Price: request quote
Location: Land-cz CZ 60200 Brno, Janska 12
Seller: AMARON s.r.o.

Press force: 100 T Stroke length: 40 mm Number of strokes - Idling: Single stroke 150-350 z / m Ram adjustment: 30 mm Table mounting surface: 1240 x 2020 mm Plate holes: 800 x 400/800 x 160/800 x 160 mm Side post passage: 730 mm Motor power: 4P x 22 KW Machine weight: 18000 kg Accessories: Decoiler Forklifts Noise barrier Fence Drawing documentation Manuals Lubrication (Lubricatino) Clutch and brake Dry clutch Disc brake

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 180 €
Location: Land-de DE Germany, 42719 Solingen
Seller: Surplex GmbH

Weight approx.: 16 kg Dimensions (l x w x h) approx.: 500 x 600 x 500 mm Description: TOP Condition Testet Processor: Intel Core i7-3770 Clock Speed: 3,4 GHz Chipset: Ivy Bridge DRAM Controller Southbridge: Panther Point LPC Controller Storage/HDD: - RAM: 8GB DDR3 1600 Network: RJ-45 WiFi: - DVD Writer: yes Graphics: Ivy Brdige Graphics Controller Sound: Panther Point High Definition Controller Modem: Panther Point HECI Controller Interfaces: LAN (RJ-45), 2x USB 3.0, 10x USB 2.0, 2x PS2, Micro-In, Audio-Out (front+hinten), Line-In, 1x DVI, HDMI, Smartcard Reader Information: BIOS password not available. Password protected. BIOS must be flashed

Category: 1406: conveyor belts
New in: 1999
Price: 970 €
Location: Land-de DE 97084 Würzburg, Gattingerstr. 11c
Seller: Dr. Sonntag Industriebedarf u. Logistikplanung

Belt conveyor make BEUMER Length: 1760 mm Width (outer width): 550 mm Belt width: 500 mm Speed v = 0.93 m/s with recording attachments for support or suspensions Drive: drum motor high guide 120 mm from top edge of belt without posts option 2 supports each €69.00 = € 138.00

Category: 703: meat and fish processing machines
New in: used
Price: 50 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Category: 101: boring mills and machining centers
New in: 2004
Price: request quote
Location: Land-de DE 78267 Aach, Im Hirtenstall 16
Seller: Martin Beschle Werkzeuge & Maschinen GmbH

Vertical - CNC machining center HERMLE C 800 U With train control HEIDENHAIN TNC 430 Year of construction: 2004 traverse paths: X 800 Y 600 Z 500 Speed range: 0 - 16,000 rpm continuously (SK 40) with the following accessories: Solid angle table 1000 x 560 mm clamping surface Turn adjuster integrated in the left part of the wall with collet Chuck and tailstock Vertical tool changer with 30 magazine places (SK 40) 1 high-speed spindle 50000 RPM 1 high on spindle 70000 RPM Prepared IKZ Chip conveyor 3D measuring probe Renishaw MP 10 Tool breakage detection Electronic Handwheel Electronic heat compensation Y/Z axis Oil mist extraction Chip washing gun Ethernet interface Ful ...

Category: 1300: other machines and plants
New in: used
Price: 350 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Category: 106: presses
New in: 1974
Price: request quote
Location: Land-De Germany, 50937 Köln
Seller: Gewerbe Dmitri Perfilov

Nominal capacity, t. 63 Nominal capacity by each position, t. 20 Max. stroke of cushion, mm: 18 - 56 Ram stroke, mm: 280 Distance between uprights, mm 2200 Stamping position: 12 Distance between position, mm 180 Table dimensions, mm 2200 Number of positions with Cut pos. 12 Adjustment of tool holder in Ram, mm 50 Closed high, mm 430 mm Shut height, mm 710 mm. Weidth of coil, max., mm 280 Max. Ø stamppcs., mm: 140 - 200 Motor, kW: 20 Press dimensions: 4500 x 3500 x 4300 mm. - Subject to prior sale -  ...

Category: 1404: containers
New in: 2005
Price: 4.200 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Category: 402: packing machines
New in: 2000
Price: 345.000 PLN
Location: Land-pl PL 42-60 Tarnowskie Góry, Nakielska 35
Seller: Tiger Job Sp. z o.o.

VERTICAL PACKING MACHINE HSV 101 S FLEXIBLE along with the conveyor can be compensated with dildo Decentralized drive and flexible control of the machine is welding torch system The device is completely decentralised structure drive A wide range of packaging and bulk products easy control and programming A wide range of optional equipment easy replacement of the tube with flange by means of clamps quick change clamping units Effectively set the cut as a sign of low energy consumption 100 memory settings automatic centring film Self diagnostics A wide range of moulding packaging System easy to connect film Materials combined hot such as PP, paper, PE, etc. Thermoplastic materials su ...

Category: 1403: other storage equipment
New in: used
Price: request quote
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)