4527 offers

maximum number of results exceeded > 1000
please refine your search

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-kr KR 407-8 Seoul, Seoul South Korea
Seller: BMJ KOREA

HF Induction Bending Machines and machines 5.High Frequency Induction Bending Machine Make:Hankook(Korea) Capacity: 63mm?508mm Size: 24,000mm(L)x16,000mm(W)x3,000mm(H) 6. High Frequency Induction Bending Machine Make:Hankook(Korea) Cap': 75mm~1219mm Size: 30,000(L)x12,000(W)x5,000(H) 77. High Frequency Induction Bending Machine Make:Hankook(Korea) Bending Radius: 2,000mm Working Pipe Length: 9,000mm Arm Length: Max 5,300mm Outer radius: Max 609mm Driver Unit: mortor 15kw,11kw Oil Cooler(Water Chiller) High Frequency Induction Heater: 300KW Water Cooling System:Pump: 3.7kw, Air Tank Air Dryer  ...

Category: 106: presses
New in: 1959
Price: request quote
Location: Lager Ennepetal
Seller: Wirths GmbH, Werkzeugmaschinen

pressure: 125 t stroke: 50 mm no. of strokes: 60 - 180 Hub/min table-size: 1000 x 500 mm dimension of ram: 1000 x 500 mm distance between columns: 1100 mm distance between columns: 350 mm ram adjustment: 0 - 60 mm number of connecting rods: 2 Stück tool shank hole (depth x diameter): 100 x 60 mm total power requirement: 25 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 8 x 2 x 3,4 m Along with the machine we supply an Alba feeding line with decoiler, leveler and roll infeed. Line can work on material 300 x 3 mm. Speed of press is adjustable by a PIV gear box.

Category: 1200: machines and plants for process engineering
New in: 2011
Price: request quote
Location: Land-kr KR 407-8 Seoul, Seoul South Korea
Seller: BMJ KOREA

Fin tube production plant(?31.8) for Heat Exchanger Tube Product:?15.88~?31.8mm Make:Korean Manufacturing Year:2011 1.Heat treatment furnace Make:Oksan(Korean) Year:2011 ·Cap':200ton/ch ·Heating Time:14hr/ch Material :steel Furnace Size:7,000×7,700×20,000mm(L) ·Furnace Cap': Inside:7,700× 8,000×22,000mm(L) Loading Cap'(Car Frame):220ton(ch) Driving Cap:350ton/ch ·Furnace Temp': Max':1,000? Operating Temp':Room Temp'~800? ·Burner(LNG or LPG): 11ea×2rows 360,000kal/hr ·Rail:56m ·Turbo Blower 2. Compressor Make:Yujin(Korean) Year:2011 (1)Screw Air Compressor(3set) Cap':12.8CMM Motor:75kW  ...

Category: 305: peripheral equipment (e.g. heating,cooling,drying)
New in: 2017
Price: request quote
Location: NORTEC Showroom
Seller: NORTEC MASCHINENTECHNIK GMBH

Air volume: 30 m³/h temperature max.: 150 ° C material hopper volume: 60 l dew point of the dry air: -70 ° C blower power: 0,4 kW heating capacity: 2 kW connected load: 4,5 kW dimension L x W x H: 1.000 x 660 x 1.700 mm weight: 98 + 65 kg supply voltage: 400V/ 50 Hz painting: Edelstahl / ENGEL grün techn. data : according to the data sheet: Condition : as good as new: : Mobile dehumidifying dryer, equipped with: - 80 l stainless steel hopper + visualized temperature display - hopper supporting frame with wheels - insulated suction box fair unit as well The technology used for this series of dryers is based on the X DRYER: this means high performance with efficiency up to -70°C D ...

Category: 1200: machines and plants for process engineering
New in: 2015
Price: request quote
Location: Land-kr KR 407-8 Seoul, Seoul South Korea
Seller: BMJ KOREA

Aluminium Melting furnace (200ton/day) Make: Seongwon(Korea) Yer: 2015 25ton/Charge Fuel: Bunker-C Capacity: 4ton/Hr Outlet temp.: 720? Burner: 200×10?kcal/Hr Blower: 90?/min Auto Door 1-2 Continuous casting machine Make: Seongwon(Korea) Yer: 2015 Ingot Case: 200units Material: FCD-25 angle: 30? Detaching Hammer: Air type Conveyor: 152.4(mm)(pitch) Distributor: 10holex?50(mm) Cooling water: 50ton/Hr Control Panel 1-3 Continuous casting machine x 2sets Make: Seongwon(Korea) Yer: 2015 Ingot Case: 265units Material: FCD-25 Angle: 30? Detaching Hammer: High pressure Air Conveyor: 152.4(mm)(pitch)  ...

Category: 305: peripheral equipment (e.g. heating,cooling,drying)
New in: 2017
Price: request quote
Location: Lager NORTEC
Seller: NORTEC MASCHINENTECHNIK GMBH

Air volume: 3,0 - 10,0 m³/h temperature max.: 20 - 180 ° C material hopper volume: 12,0 l heating capacity: 1,05 kW control: SPS dimension L x W x H: 332 x 307 x 635 mm weight: 24 kg supply voltage: 230V/1Ph 50-60Hz painting: Standard dew point of the dry air: -70 ° C techn. data : according to the data sheet: : Small big dryer, particularly suitable for the treatment of technical polymers. Compact, practical and highly performing thanks to its zeolite double tower equipment. Also working with non-dried circuit compressed air. For mounting directly onto feeding zone of IMM. - 30 Liter insulated Hopper - Dew Point -55°C - Max. temperature 180°C - Anti-stre ...

Category: 1401: shelves
New in: 2015
Price: 9.500 €
Location: Land-de DE Vogtland
Seller: Alexander von Westernhagen

2-storey compartment floor racking, approximately 92 fields, surface approx. 10 m x 9 m, F.X. Rauscher, the shelves depth 80 cm - used -: Price from site: â?¬9.500.-(net), including dismantling etc.! Beautiful, high-quality connectors! Manufacturer: F.X.. Rauscher Type: compartment floor rack system Year of constr.: 2015 Load main roads and byways: 350 kg Maximum field load / floor: 1.900 kg Floor load capacity: Ground width 970 mm = 100 kg (only a couple in the row behind the stairs) Ground width 1,270 mm = 150 kg (main) The shelves depth: 80 cm approx. 7 floors per box on the 2 floors = total approximately 644 shelves some with hardwood floors Pro level app ...

Category: 305: peripheral equipment (e.g. heating,cooling,drying)
New in: 2016
Price: request quote
Location: Lager NORTEC
Seller: NORTEC MASCHINENTECHNIK GMBH

Air volume: 120 m³/h blower power: 2,1 kW : 2 Stck/ pices Temperature range: 70 - 150 °C dew point of the dry air: -75 ° C connected load: 9,2 kW adapter Ø: 50 mm supply voltage 3x400 V, with neutral wire (N) 50 c: range L-W-H: 491 x 861 x 1.276 mm weight of the machine ca.: 170 kg Condition : fair machine: Techn. Data : according to the data sheet: : The technology used for this series of dryers is based on the X DRYER: this means high performance with efficiency up to -70°C Dew Point. The special thermodynamic design uses zeolite with low energy consumption and high throughput efficiency. A powerful microprocessor controls the SINCRO range. The SX dryers use solid state relays ...

Category: 706: beverage machines
New in: 2016
Price: request quote
Location: Land-de DE 44265 Dortmund, Rankenweg 6
Seller: Ebert Technologie GmbH

2 pieces of fill hight controls for cans Made: HEUFT Year: 2016 and 2010 Type: Spectrum TX including pusher

Category: 305: peripheral equipment (e.g. heating,cooling,drying)
New in: 2017
Price: request quote
Location: Lager NORTEC
Seller: NORTEC MASCHINENTECHNIK GMBH

Air volume: 0,5-3,0 m³/h temperature max.: 20 - 180 ° C material hopper volume: 1,5 l heating capacity: 0,45 kW control: SPS dimension L x W x H: 230 x 213 x 478 mm weight: 7,6 kg supply voltage: 230V/1Ph 50-60Hz painting: Standard dew point of the dry air: -70 ° C techn. data : according to the data sheet: : Small big dryer, particularly suitable for the treatment of technical polymers. Compact, practical and highly performing thanks to its zeolite double tower equipment. Also working with non-dried circuit compressed air. For mounting directly onto feeding zone of IMM. - 30 Liter insulated Hopper - Dew Point -55°C - Max. temperature 180°C - Anti-stress  ...

Category: 706: beverage machines
New in: used
Price: request quote
Location: Land-de DE 44265 Dortmund, Rankenweg 6
Seller: Ebert Technologie GmbH

2 pieces of inkjet Printer, date coder, inkj Jet coding machine. Made: Videojet Year: 2014 Type: 1650 UHS (Ultra High Speed) with Touch Screen

Category: 305: peripheral equipment (e.g. heating,cooling,drying)
New in: 2017
Price: request quote
Location: Lager NORTEC
Seller: NORTEC MASCHINENTECHNIK GMBH

Air volume: 2,0-6,0 m³/h temperature max.: 20 - 180 ° C material hopper volume: 4 l heating capacity: 0,45 kW control: SPS dimension L x W x H: 276 x 269 x 548 mm weight: 14,0 kg supply voltage: 230V/1Ph 50-60Hz painting: Standard dew point of the dry air: -70 ° C techn. data : according to the data sheet: : Small big dryer, particularly suitable for the treatment of technical polymers. Compact, practical and highly performing thanks to its zeolite double tower equipment. Also working with non-dried circuit compressed air. For mounting directly onto feeding zone of IMM. - 30 Liter insulated Hopper - Dew Point -55°C - Max. temperature 180°C - Anti-stress s ...

Category: 1300: other machines and plants
New in: 2017
Price: 42.300 €
Location: Land-de DE 28865 Lilienthal, Beim Neuen Damm 21
Seller: Bremer Werk für Montagesysteme GmbH

CNC four rolls - round bending machine Manufacturer: Prinzing Type: RBA 60/53 Year of constr.: 2017 Hours of operation: 300 Operating speed: 0-20 m / min OW-HW-UW-AW roll diameter: 60-70-70-70 mm Sheet thickness mild steel: 1 mm Workpiece width max: 500 mm Tube diameter min/max: 180/640 mm Dimensions (Lxwxh): 3200 x 1225 x 2230 mm Weight: 1200 kg Surface hardened rolls HP version with servo-drives High restraint Feed table with siding and sheet feed Hand control panel: Siemens HT8 CNC automated: Non-system Siemens like SINUMERIK

Category: 301: injection moulding machines
New in: 1997
Price: request quote
Location: Complast - Pegnitz
Seller: Complast Gmbh

screw size:25 mm injection shot weight in Polysterol:54 g clamping force:350 kN : INJECTION UNIT: screw size:25 mm max. swept volumne:60 cm³ injection shot weight in Polysterol:54 g/PS injection pressure:1.890 bar : CLAMPING UNIT: closing pressure:35 t tie bar distance:280 x 280 mm mould hight - min.:180 mm opening stroke:350 mm : CONTROL: microprocessor control:NC4 screen text:deutsch Manual:deutsch : EQUIPMENT: robot interface:nein core pull:1 x without hopper / without water distributor: : OTHER DATAS: pump drive power:7,5 kW total connection power:13,8 kW total weight:1.800 kg :3,0 x 1,1 x 1,7 m Terms of payment: 100 % prior to delivery

Category: 107: sheet metal working
New in: 2017
Price: 42.300 €
Location: Land-de DE 28865 Lilienthal, Beim Neuen Damm 21
Seller: Bremer Werk für Montagesysteme GmbH

CNC four rolls - round bending machine Manufacturer: Prinzing Type: RBA 60/53 Year of constr.: 2017 Hours of operation: 300 Working speed: 0-20 m / min Rollers diameter OW-HW-UW-AW: 60-70-70-70 mm Thickness mild steel: 1 mm Workpiece width max: 500 mm Pipe diameter min/max: 180/640 mm Dimension (Lxwxh): 3200 x 1225 x 2230 mm Weight: 1200 kg Rollers surface hardened HP version with servo-drives High restraint Feed table with siding and sheet feed Manual control panel: Siemens HT8 CNC automated: Siemens SINUMERIK

Category: 106: presses
New in: 1967
Price: request quote
Location: D - 77815 Bühl
Seller: Hans Klein Werkzeugmaschinen-Handel GmbH

pressure: 42 / 60 t stroke: 6 - 60 mm no. of strokes: 50 - 250 Hub/min table surface area: 440 x 590 mm distance between columns: 460 mm ram surface: 320 x 320 mm ram - range of adjustment: 80 mm distance table - lower edge of ram: max. 350 mm hole in the table: 120 x 160 mm ram hole: ø 40 x 75 mm total power requirement: 4 kW weight of the machine ca.: 2,5 t dimensions: 1,54 x 1,25 x 2,25 m Accessories: decoiler, feeder

Category: 701: basic foodstuffs and animal feeds machines
New in: used
Price: request quote
Location: Land-de DE 26871 Papenburg, Helgenstr. 25
Seller: Maschinen und Mühlenbau Benker

Lödige mixer complete stainless steel 1200 litres Heated jacket very good condition Standing on steel construction approx. 1500 mm high

Category: 106: presses
New in: 2000
Price: request quote
Location: Land-de Germany, 72501 Gammertingen
Seller: Pressen HAAS GmbH

Pressure: 80 ton Ram stroke adjustable: 13 - 80 mm Ram adjustment: 80 mm Shut height (stroke down, adjustment up): 383 mm Table surface area : 1.250 x 890 mm Ram surface area: 1.250 x 630 mm Hole in table: 1.120 x 220 mm Number of strokes: 30 - 350 s.p.m. Table height over floor: 950 mm Required power: 32,5 kW Weight of machine approx.: 16 ton

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-de DE
Seller: EnTeHa GmbH & Co.KG

Preliminary information: stock no. 4657: 1 used Rapid radial drilling machine Make DONAU, mod. DR 28 Z with drilling head adjustment 600 mm work range: table 1200 x 500 mm

Category: 106: presses
New in: used
Price: request quote
Location: Land-de Germany, 72501 Gammertingen
Seller: Pressen HAAS GmbH

Pressure: 32 ton Ram stroke adjustable: 6 - 50 mm Ram adjustment: 50 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 450 mm Table surface area : 440 x 420 mm Ram surface area: 360 x 310 mm Hole in table: 200 x 100 mm Number of strokes: 125 - 625 s.p.m. Table height over floor: 850 mm Required power: 4 kW Height over floor approx.: 2.100 x 1.550 x 2.500 mm Weight of machine approx.: 4 ton

Category: 110: accessories for machine tools
New in: used
Price: request quote
Location: Land-de DE 64625 Bensheim
Seller: EnTeHa GmbH & Co.KG

No. 4648: 1 used Coolant reservoir with paper band filter and high pressure pump (approx. 40 bar) make KNOLL / ALLWEILER (STAMA), type KTS - 25-50-T new in 1994 with stainless steel tank approx. 600 l work range: Filtervliebreite approx. 700 mm Power: 5.5 kW Accessories: Engine KNOLL ALLWEILER filters PF 100 CVS (BJ. 1991) Other: stainless steel tank approx. 1570 x 800 x 500 mm Overall - dimensions 1800 x 850 x 1200 mm Weight 200 kg (estimated)

Category: 106: presses
New in: 1981
Price: request quote
Location: Land-de Germany, 72501 Gammertingen
Seller: Pressen HAAS GmbH

Pressure: 40 ton Ram stroke adjustable: 8 - 50 mm Ram adjustment: 50 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 820 mm Table surface area : 810 x 450 mm Ram surface area: 720 x 350 mm Hole in table: 600 x 110 mm Number of strokes: 100 - 1.000 s.p.m. Table height over floor: 1.030 mm Required power: 19,5 kW Weight of machine approx.: 6,8 ton

Category: 1502: diesel forklift trucks
New in: 2018
Price: 20.000 €
Location: Land-dk DK 8800 Viborg, Morsøvej 10
Seller: MerchantSumborg AS

With a maintenance free AC motor, a large torque with a fantastic gradeability, powerful traction it ensures a smooth running even on the most rough roads and at the same time ensures a high level of comfort for the user. Max-8 is a multifunctional forklift with full free lift, that can lift up to 3,5 tonnes. Capacity 3500 kg. Power type Diesel Lift height 4500 mm. Closed height 2,20 m. Fork lenght 1220 mm. Manufacturer Ep Equipment Engine Mitsubishi S4S Motor Type of mast Triplex-Mast with full free lift Emission class EURO IIIA Emission Attachment Sideshift Fuel tank 75 liter please contact us for further information!

Category: 106: presses
New in: 1975
Price: request quote
Location: Land-de Germany, 72501 Gammertingen
Seller: Pressen HAAS GmbH

Pressure: 45 ton Ram stroke adjustable: 8 - 60 mm Ram adjustment: 60 mm Shut height (stroke down, adjustment up): 350 mm Free frontal opening L-R: 450 mm Free lateral opening F-B: 270 mm Table surface area : 430 x 490 mm Ram surface area: 375 x 300 mm Hole in table: 180 x 150 mm Number of strokes: 80 - 400 s.p.m. Table height over floor: 850 mm Required power: 4,8 kW Dimensions L x W x H: 1.400 x 1.300 x 2.150 Weight of machine approx.: 3 ton

Category: 201: saws
New in: 1990
Price: 65.000 €
Location: Land-at AT 1010 WIEN, RENNGASSE 9/9
Seller: Heindl Handels GmbH

Complete line of Sash gang saw EWD HDN 600 Well maintained high performance FRAME SAW. Frame width 710 x 735 mm. Stroke 600 mm. Speed 310 rpm. Fully hydraulic with automatic overhang adjustment. Water cooling system, Hydraulic saw tensioner and saw back. Drive motor and countershaft. Electric control cabinet with control. Mass balancer (for vibration compensation!) Splitting Wedge Type AVER, with Hydraulic Drive .; in very good condition, Year of manufacture 1990 Best condition with remote control wagon WEISS, round wood feeder with master turner, sawmill mechanization, cross conveyor etc .. in excellent condition, built 1990 (full service every year!) -running manufacturer servi ...

Category: 101: boring mills and machining centers
New in: 2004
Price: request quote
Location: D-59302 Oelde
Seller: Stiens Werkzeugmaschinenhandelsgesellschaft mbH

x-travel: 630 mm y-travel: 500 mm z-travel: 500 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: 1 - 10.000 min/-1 power capacity - main spindel: 13 / 9 kW tool taper: SK 40 max. Torque: 83 / 57 Nm work table:: table surface area: 800 x 500 mm number of T-slots: 5 T-slot - distance: 100 mm max. table load: 500 kg max. workpiece height: 240 mm table height over floor: 850 mm Tool-Presetter:: number of toolpositions: 24 pos. Max. mould width: 80 / (140) mm max. tool length: 300 mm max. tool weight: 7,0 kg max. total weight: 72,0 kg feeds:: rapid traverse: 30 m/min feed speeds: 0 - 30.000 mm/min feed power: 6 kN total power requirement: 17 kVA weight of the ...

Category: 702: breadmaking and confectionery machines
New in: 2000
Price: request quote
Location: Land-de DE Bayern
Seller: In.Ha.TEC Vertrieb & Service UG

Used dough extrusion machine KEMPER, type: Concorde BST - Edelstahlverkleidet - dough strand 4, 5 cm high x 12, 5 cm wide - oiling with blower - belt - year: 02 / 2000 tour and test run like available on request.

Category: 104: grinding machines
New in: 2002
Price: request quote
Location: Staufenberg 2
Seller: HD Werkzeugmaschinenhandel GmbH

grinding diameter: mm grinding length: mm centre height: mm total power requirement: kW weight of the machine ca.:19 t dimensions of the machine ca.: m A well-preserved CNC-EXTERNAL cylindrical grinding MACHINE with gantry loader Grinding machine Weight approx. 19 t Dimensions: Width: approx. 3m, length: approx. 4.70 m, height: 2.30 m Loading portal wide approx. 2m, long approx. 10 m, high approx. 2,80 m

Category: 702: breadmaking and confectionery machines
New in: 2008
Price: request quote
Location: Land-de DE 64832 Babenhausen, Industriestr. 11
Seller: bak-tec GmbH

Double spiral mixer with bottom outlet Interactive system 4016 - automatic mixing system -for max. 200 kg dough per batch suitable -reinforced gearbox of 250 kg model installed -ideal for strong pretzel doughs as well as for soft dough with high water insertion -with floor drain on conveyor belt (onward transport to the left and right) -2x lateral Sancassiano high conveyor belt (right & left possible) -Sancassiano star hopper STL20/15 (pros scoop in 15 kg servings) -Siemens S7 control with touch panel -Dough rest on feeder belts for 15 minutes -Communication with metering equipment possible -Connection: 37 kW, 75 A, 400 V, 50/60 Hz, 3 Ph -Dimensions of the entire system: Width ...

Category: 107: sheet metal working
New in: 1998
Price: request quote
Location: Hamburg-Barsbüttel
Seller: SALING Werkzeugmaschinen GmbH

table length:3050 mm table width:1525 mm burner heads:1 laser capacity in Watt:2500 X-axis :3050 mm y-axis:1525 mm z-axis:100 mm table load:805 kg Layer accuracy X-Y:+/- 0,01 mm Layer accuracy Z:+/- 0,01 mm repeatability X-Y-Z:0,005 mm material thickness:structural steel 20 mm material thickness:stainless steel 12 mm material thickness:Aluminium 8 mm dimensions of the machine ca.:7250 x 2875 mm weight of the machine ca.:15400 kg 1 used Laser cutting machine MAZAK SUPER TURBO ST-X510 HI-PRO Superc incl. SICAMW programming software & MAZATROL L-PLUS control Machine description according to MAZAK Optonics for MAZAK ST-x510champion Economical solution with proven reliability PROCESS: 2D, HYBRID  ...

Category: 706: beverage machines
New in: 1987
Price: request quote
Location: Land-de DE 91347 Aufseß, Im Tal 70b
Seller: Aufsesser Brauerei

Sale box-Tower stacker: Box-either 4, 5 or 6 high. Stainless steel execution. Rugged, sturdy construction. Built in approx. 1987

Category: 208: lacquer machines
New in: 2004
Price: request quote
Location: Land-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: Heesemann Cefla Türenlackieranlage, Type: Cefla Robot, Year: 2004, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 3-80, Working widht max mm: 1300, Spraying line: yes, work piece cleaning: yes, work piece detection: yes, Conveyour system: Band, Spraying stations: 1, Fast exchange system spray gun carrier: yes, Laquer circles: 4, Laquer system - airless: yes, Laquer system - airmix: yes, by rollers: yes, by scraper: yes, Dry exhauster: yes, Jet dryers (number): Hochtrockner, Sanding machines (number): 1, Brushing machine: no, Design sanding machine no 1: Querband/Längs/längs, Dust exhaust (number): yes, UV dryers -  ...

Category: 834: post press: perfect binders
New in: 2009
Price: request quote
Location: Land-ch CH 9240 Uzwil, Sternenstrasse 4
Seller: MJS-LINE GmbH

Power : 170 bonds with an operator Format (cm): max. 380 mm long, max. 350 mm high, 36 mm thick Equipment / Additional information: Power requirements 380 V three-phase, 50 Hz, 2.44 kW (incl. Dust extraction) Space consumption approx 2 m2 Slot capacity: up to 0.8 mm deep and up to 36 mm (not adjustable) Glue pot and rolles easy to remove Paper dust extraction Controlled 32 l container capacity, interval circuit of the machine Heated cancel angle

Category: 204: grinding machines
New in: 2003
Price: request quote
Location: Land-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: Heesemann, Type: LSM 8, Year: 2003, Control: Heesemann , Monting of the machine: Quer /lang/lang/Bürste, Sanding width mm: 1350, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Band 1 Leistung kW : 13/17, Belt 1 shoe unit: yes, Band 1 Schleifbandgeschwindigkeit m/s : regelbar, Belt 2 shoe unit: yes, Band 2 Kombiaggregat Walze/Schuh: no, Band 2 Leistung kW : 17, Band 2 Schleifbandgeschwindigkeit m/s : regelbar, Year :2003

Category: 1401: shelves
New in: 2005
Price: request quote
Location: Land-de DE 53879 Euskirchen, An der Vogelrute 15
Seller: Montageservice Heindrichs

For sale is a barely used storage Paternoster by 2005. The machine has 12 shelves which can be loaded with 120 kg each. A shelf is equipped with 4 ausziebaren drawers and all others with a lower shelf. The mezzanine can be removed with higher goods. The overall dimensions of the machine is 2560mm / 1160 + 110mm electronic W/D/H / 2600mm. The specialist Interior measure floor W/D/H 2200 mm / 408 mm / 300 mm. On a surface of 2, 97 m², up to 21, 54 m 2 of automatic storage area can be generated with this machine. Gladly we make you an offer

Category: 103: milling machines
New in: 2000
Price: request quote
Location: D - 49779 Niederlangen
Seller: Heinz Sanders GmbH

pressure:16 t throat:300 mm stroke:300 mm diameter of piston:80 mm rod diameters:56 mm insertion height:max. 500 mm Table dimensions:660 x 380 mm table height:900 mm oil volume:145 l noise level:73 dB(A) safety distance:119 mm total power requirement:7,5 kW weight of the machine ca.:2,4 t dimensions of the machine ca.:2,0 x 1,0 x 2,6 m Pusher speed rapid traverse: 223mm / sec Tappet speed low pressure: 110mm / sec Pusher speed high pressure: 23mm / sec Tappet speed retraction: 215mm / sec Pestle: 500 x 300 mm - Safety control PILZ system family PSS 3056 - complete technical documentation including belt system Product: ABS Type: WV SRF 300/60 ES Year of construction: 2000 - Feed PLC controlle ...

Category: 102: lathes
New in: 2004
Price: request quote
Location: Land-de DE
Seller: Spantech GmbH

CNC turning / milling center Manufacturer: Gildemeister Type: GMX 300 year: 2004 Control: Siemens 840 d Powerline Rotary diameter over bed: 640 mm Swing over cross slide: 640 mm Longitudinal travel: 1585 mm power: 37/22 kW Speed range from - to: 5000 RPM Turning/milling spindle RPM: 12.000 rpm Main spindle spindle diameter: Röhm 250 mm 3 jaw Chuck counter spindle spindle diameter: Röhm 250 mm 3 jaw Chuck Tool Magazine: 120: additional magazine about the counter spindle: 3 tool stations Max d 88 m x 600 mm = lg. Facilities: Tool carrier above: - with turning and Milling spindle as the motor spindle. Recording HSK 63A DIN 69893: tool carrier ...

Category: 204: grinding machines
New in: used
Price: request quote
Location: Land-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: Arminius Fräs und Kantenschleifmaschine, Type: SP 12, Program: yes, Axis control: no, Work piece width min-max mm: 60-500, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 100, Sanding hight mm: 120, Surface sanding units: 1, Profile sanding units: 2, Phase units: 2, Monting of the machine: Fräsen/Schleifen von oben/gerade schleifen/Phase/Phase/Bürste/Bürste, Unit 1 tiltable: yes, Unit 1 Kw: 2,2, Unit 2 slewable: no, Unit 2 Kw: 2,2, Unit 3 slewable: no, Unit 3 Kw: ca.2,0, Unit 4 slewable: yes, Unit 4 Kw: ca 1,0, Unit 5 slewable: yes, Unit 5 Kw: ca. 1,0, Unit 6 slewable: Bürste, Unit 6 Kw: Bürste, Shoes electr. controlled: yes, Constant table hight: y ...

Category: 1403: other storage equipment
New in: 1998
Price: 39.500 €
Location: Land-de DE Sigmaringen
Seller: Alexander von Westernhagen

2-storey warehouse stage (Gallery, stock level), 500 kg / m2, approx. 542 m 2 per level, total 1.084 m 2 - used -: Price from site: â?¬39.500.-(net), plus dismantling etc.! Manufacturer B & W - shelves J. Schärer, 01982 GroÃ?räschen Year of construction: 1998, self-supporting Length: 54,05 m Width: 10.03 m Level 1st floor 542 m2 Level 2nd floor 542 m2 Total space on the Plains: 1084 m2 Weight / m ² 508 kg / m ² (safety factor of 1.5) Height bottom 3 m and 6.3 m Height of the upper edge of the 3.3 and 6.6 m Steel makers double I-beam 300x150mm, 52 units per floor (104 total) Distance from beam to beam 1,050 mm C-profile 300 x 10 ...

Category: 208: lacquer machines
New in: 1990
Price: request quote
Location: Land-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: Bürkle, Type: DALD 1300, Year: 1990, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 250, Operating side: links, Working height: ca.900, Widht of roller coater: 1350, Widht of metering roller: 1350, Attachment bracket roller: yes, rbakel: no, Work piece thickness max mm: 5, Feeding speed min/max: 5-25, Hight adjustment by engine: no, Year :1990

Category: 101: boring mills and machining centers
New in: 2002
Price: request quote
Location: Land-nl NL 4761 Zevenbergen, Campagneweg 10
Seller: Mamach Machinehandel BV

CNC Heavy Duty, High Precision, Vertical Boring and Turning Mill Max. turning diameter 1250 mm Max. turning height 800 mm Max. workpiece weight 4000 kg C-Axis minimum index angle 0,0001° Spindle taper ISO 7/24 No.50 Type of tool holder MAS BT 50 Tool magazine capacity 16 CNC Control Fanuc Series 18T

Category: 201: saws
New in: 1995
Price: request quote
Location: Land-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: Hüllhorst, Year: 1995, Type: Kranzprofilsäge, Control: Ferrocontroll, Cutting depth mm: 250, Working hight mm: 120, Feeding speed max m/min: 60, Feeding speed continous adjustable: yes, Slewing range degrees: +45-45, Work piece length max mm: 4500, Kw Leistung Sägemotor: ca.4, Loading stations: yes, Waste conveyor: no, Saw Blade Diameter mm: 500, Length to slide in mm: 5000, Drill head vertical controlled: yes, Spindles: 8, Drill head vertical controlled spindles: yes, Collet chuck: yes, Optimisation: yes, Maschine vorführbereit: yes, Year :1995

Category: 903: machines for soil cultivation, sowing and harvesting
New in: 2005
Price: request quote
Location: Land-at AT Werkstättenring Süd Objekt 836, 1300 Schwechat
Seller: Karner & Dechow Industrie-Auktionen Ges.m.b.H.

Rotor-Mulcher spearhead 460 Serial. 1051846285, work-B approximately 4,600 mm, year 2005, weight: 2,260 kg, note to the State: div. Rust all-round device, paint damage, abrasions around object as well as div. wear and tear Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note  ...

Category: 212: peripheral equipment (e.g. heating, conveying, drying)
New in: 2004
Price: request quote
Location: Land-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: Bürkle , Type: ALP, Year: 2004, Lifting power kg: 1500, Length mm: 3000, Width mm: 1400, Lifting hight approx. mm: 1400, Total hight mm: 320, Safety strip: yes, Carriage: no, built-on roller conveyor: yes, Total power kW: ca.4, Anlage demontiert: yes, Year :2004

Category: 1501: electric forklift trucks
New in: 2006
Price: request quote
Location: Land-at AT Werkstättenring Süd Objekt 836, 1300 Schwechat
Seller: Karner & Dechow Industrie-Auktionen Ges.m.b.H.

Model unknown, BJ probably 2006, hours unknown, with 2 sliding doors, as well as in-service rear cargo area, with trailer coupling, exclusive charging station Note to the State: div. dents all around vehicle, paint damage, vehicle heavily used, driver's seat ripped Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hid ...

Category: 201: saws
New in: 1984
Price: request quote
Location: Land-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: Doppelgehrungssäge, Type: DKG 400 A, Year: 1984, Control: Hand / Teilautomatik, Pneumatical clamping system: yes, Saw blade tiltable up to °: 45-90, Cutting hight max mm: ca. 70, Cutting lenght max mm: 2500, Power saw engine kW: 3, 100 Hz, Width adjustment manually: yes, Width adjustment by engine: yes, Action controlled: yes, Saw blade diameter max mm: 300, rotations controlled: 4500, Exhaust diameter mm: 100, inkl. Bohrstation, Year :1984

Category: 833: post press: gatherers
New in: 2016
Price: request quote
Location: Land-de DE 50933 Köln, Eupener Str. 135-137
Seller: PP LION GMBH

FKS Duplo iSaddle 40/40 with DKT-200 Ref.Nr: 2585 manufacturer FKS model Duplo iSaddle 40/40 with DKT-200 year built: 2016 condition: very good price: on technical request spezification: â?¢ 4 pieces gathering tower with 10 stations DSC 10 / 60i â?¢ 1 piece transfer modules left with manual loading station LUL-H â?¢ 3 pieces bridge between towers â?¢ 1 pc PC controller â?¢ collecting 1 piece, creasing and plow folding modules DBMS-F2 â?¢ 1 piece saddle stitching station with 2 Hohner stitching heads DBMS-S â?¢ 1 piece front trimmer DBMS-T â?¢ 1 piece of head and foot trimming DKT-200 â?¢ ...

Category: 204: grinding machines
New in: 1994
Price: request quote
Location: Land-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: Heesemann, Type: Profilklotzeinschleifgerät PWST, Bauyeshr : 1994, Control: hand, Sanding belt hight: 80, Tischlänge mm : 800, Work piece hight min - max mm: 80, Control panel on top: yes, radius sanding device: yes, Profilwerkzeug-Formschleifmaschine PWS-T <CRLF>für das massgenaue Schleifen der Konturen vorgearbeiteter<CRLF>Profilwerkzeuge, bestehend aus<CRLF>über Getriebemotor oszillierend,<CRLF>Profilwerkzeuge auf Kreissegment schwenkbar gelagert.<CRLF>, Year :1994

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-uk UK DN10 Doncaster, unit 4, west stockwith business park,
Seller: UFM

100Kg stainless high speed mixer, with timer

Category: 204: grinding machines
New in: 1995
Price: request quote
Location: Land-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: Bütfering, Type: Vega 213 CE, Year: ca.1995, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 2, Sanding belt dimensions: ca.2120 X 1350, Table hight adjustment by engine: yes, Rollers: 1, Rubber roller: yes, Band 1 Leistung kW : 12 gleich und gegenlauf, Band 2 Kombiaggregat Walze/Schuh: 15, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: 6-20, Feeding engine kw: 1,2, Intermediate sanding of lacquer: no, Vacuum table: yes, Segment sanding shoe: yes, Bürstaggregat : yes, Durchmesser/ Bürstenbesatz: 125, Year :ca.1995

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)