Complete manufacturing lines used for sale (6)

Venjakob year of manufacture 1999 Spray guns 4 Water based paint and lacquer and also UV paint acid curing paint? – Not possible now, but can be done, if we change pump, tubes and nozzles Paint recycling - yes Is it possible to apply bets”? Water based? – yes, water based Are the work pieces stackable directly after they come out from the line? (Are they dry so they can be stacked?) – Yes, if we use UV- water based paint but when using normal water based paint or lacquer components must be dried in a shelf What type of products do you run in the line? What materials? – MDF, melamine surfaced doors, components etc. and solid wood components (mainly birch) What are the dimension limitations for the work pieces? – width min/max 20-1200 mm, lenght min/max 350-2750 mm, thickness max 50 mm Spraying machine Venjaob HGS-Duo Venjakob VEN SPRAY DUO Lacquering line sand paint IR UV dry ...

- Total installed power 48.70 kW. - Composition: - Input table with 6 work fields for preparing packages. - Milling unit composed of 3 motorized mats for moving the packages of parts and a main carriage for cross-cutting and gluing. - Diameter of the cutters 250 mm. - Milling unit power 11 kW - 2880 rpm. - Cut-off saw diameter of 250 - 350 mm. - Scoring disc diameter 115 mm. - Pre-pressing and cutting unit. - Final pressing unit. - Minimum dimensions of wooden pieces 150 x 15 x 30 mm. - Maximum dimensions of wooden pieces 1400 x 80 x 150 mm. - Maximum board length 6000 mm. - IMPORTANT: The bag aspirations and suction pipes shown in the photographs are NOT included. - This machine is currently disassembled. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified a ...

- Forming and pressing line for the production of 3-layer chipboards. - Maximum net dimensions of board 29355 x 2500 mm. - Net thickness of the boards from 4 mm to 40 mm. - Approximate board density 700 kg/m³ (for 16 mm thick board). - Production capacity: 29.40 m³/hour (for 29355 x 2500 x 16 mm boards). - Includes: • Queue preparation and management system. • 2 particle gluers for the different mixtures. • SCHENK forming system: year of manufacture 1988 (updated in 2001), with 3 forming stations (for the top, bottom and infill layers), length 28000 mm. • DIEEFFENBACHER continuous pre-press with cut-off station: year of manufacture 1989 (updated in 2001), maximum pre-pressing speed 350 mm/sec, length 28000 mm. • Acceleration conveyor belt: length 35000 mm. • DIEEFFENBACHER HPOG 80/26.200/35 continuous 2-plate hydraulic press: year of ...

- Rotary drum debarker for wood logs. - Robust construction supported on wheels. - Evacuation of bark through longitudinal grooves in the drum. - Drum length approx. 17000 mm. - Drum diameter approx. 3100 mm. - Includes inclined loading hopper with drag belt. - The outbound conveyor belt is NOT included. - This machine has been stopped since 2018. At the time of the strike it was working properly. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-43986-3

Complete overhauled Amandus Kahl pellet press. The C35-780 pellet press itself has recently been overhauled; Full documentation of all new parts is available, one of which can be seen in the photos. The last 2 pictures of the Amandus Kahl pellet press in the factory were taken before overhauling and disassembling for sale. Specifications: Brand and type: Amandus Kahl C35-780 pellet press Amandus Kahl C35-780 pellet press with 110 kW electric motor Specifications: Brand/type: Amandus Kahl C35-780 Version: pellet press with base plate Motor power: 110 kW Year engine: 2024 Engine condition: virtually unused Press components overhaul year: 2024 Sawdust capacity: 2.5 – 3 tons/hour Biomass capacity: 3 tons/hour Bran capacity: 3.5 – 4 tons/hour Straw capacity: 2 – 2.5 tons/hour Features: New 110 kW electric motor Electric control cabinet with emergency stop Full electrical ...

Number of machnines: 4 StControl: Siemens Tool changer: 1 PosPlant Consists of 4 MachinesSoraluce FR 9000ISoraluce RR 9000IISoraluce FP 8000Soraluce PM 6000Workpiece Setup StationsReplacement PalletsAutomatic Tool Supply System (WBG)Automatic Pallet SystemPallet Storage RackThe technical data is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively.About UsMore than 400 of our own machines in stockOver 15,000 m² of warehouse space, 70-ton crane capacityMore than 10,000 accessories for your workshopIf you want to sell machines, production lines, or your business,please contact us.Further offers can be found on our website.Viewings are possible by appointment.We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software s ...