800 ton used for sale

Travel X/Y/Z: 1600mm/1000mm/1100mm, workpiece carrier (pallets) X/Y: 800mm/800mm-1000mm, change time: 38s, table rotation range: 360°, max. table load capacity: 2000kg, feed rate: 10m/min, rapid traverse: 15m/min, spindle power: 32kW, tool positions: 50, spindle taper: ISO50, speed: 4500rpm. Machine dimensions X/Y: 5800mm/5200mm, weight: approx. 25000kg. Documentation available. An on-site inspection is possible.

General SKU347X811 LocationBarneveld CEcheck Main Features MaterialStainless steel Surface0.5 m2 Sizes diameter800 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,5 m² Number of sieve decks:1 Sieve sizes810 mm With covercheck Inletø 200 mm Outletø 215 mm Drive vibro motorcheck Motorcheck 380 V With extra sieve decks11 (150 µm: 300 µm: 315 µm: 2x 1,00 mm: 1,30 mm: 1,40 mm: 2x 2 mm: 2 x 3 mm) 3 mm MaterialStainless steel 1.4404 (316L) Information MakeRitec Year of construction1994 Mounted on stainl. st. framecheck With switchcheck Floor space1,20 x 1,00 m Total height1,25 mVibro sieves-Sieves > Vibro sievesBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlan ...

Key data: 3200 kN, 309 g/PS, 50 mm

Production Line Manufacturing Coffee Capsules NESPRESSO Consisting of the following components: Pos. 01) Injection moulds for capsules, manufacturer: FOSTAG AG 1.0 pcs tool with 16 cavities 1.0 pcs tool with 32 cavities Pos. 02) Two-component injection moulding machine, Bcobrsw Nriue Rvf Nyju Manufacturer: ARBURG, Type: 720A3200-800, Year of manufacture: 2017 The capsules are made as falling parts.

General SKU311X478 MakeRiera Nadeu LocationBarneveld CEcheck TypeRina 700F 800X400 PI Main Features MaterialHastelloy Motor37 KW Inlet diameter100 mm Specified Features - Peeling centrifuge Peeler centrifugecheck Basket sizesø 800 mm Max. loading weight125 kg Motor37 kW (400 V, 1480 rpm, (Ex)) Max. basket speed2150 rpm Hydraulic operatedcheck With hydraulic unitcheck InletDN100 Solids outletDN150 Liquid outletDN100 MaterialStainless steel 2.4602 (Hastelloy C-22) Information No.10573 / P19 / 00718 Year of construction2020 Mounted on foundation platecheck Floorspace2,626 x 2,250 m Total height1,930 m Weight8900 kg Extra SpecificationsProduct density 1250 kg/m3, G force 2000 G, :Peeling centrifugesRiera NadeuCentrifuges > Peeling centrifugesBrand > Riera Nadeu What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to ...

General SKU410X1241 LocationBarneveld CEcheck MakeAzo Main Features MaterialStainless steel Motor0.15 KW Inlet diameter800 mm Specified Features - Bag dump station MaterialStainless steel 1.4301 (304), Stainless steel 1.4541 (321) Bag dump stations Hopper sizesø 800x600 mm Inlet800x500 mm Outletø 600 mm With vibro motor0,15 kW (400 V, 2650 rpm) Information TypeET 800 H VR No.1394703-01 Year of construction2018 Floorspace1,20x1,00 m Total height1,20 m Weight350 kg Extra SpecificationsBagdump station, volume 200 l., with vibro sieve, 2x sieve deck, nylon, : perforation 0,3x0,3 mm and 0,5x0,5 mm :Bag dump stationsAZODosing units > Bag dump stationsBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnev ...

CNC vertical machining center Type: MCV 800 QUICK Manufacturer: MAS Year: 2018 Control: Heidenhain TNC 620 X: 800 mm Y: 500 mm Z: 550 mm Table: 1000 x 500 mm Max table load: 600 kg Spindle speed: 12000 rpm Spindle cone: ISO 40 Tool magazine: 24 positions Workpiece + tool probe Heidenhain TS/TT 460 Central automatic lubrication Cooling through the spindle center (20 Bar). Machine in good condition, under powet Find more here - / Contact us at -

Key data: 4 , 10

Oil-lubricated piston compressor Cooling: Air-cooled design Drive: direct-driven piston compressor Including 270 litre container (painted) Performance data Volume flow 504 l/min Operating pressure max. 10 bar Nominal power motor 4.0 kW Installation data Ambient conditions min. / max. 0 / 40 °C Sound level 79 dB(A) Voltage / Phases / Frequency 400/3/50 V / Ph / Hz Dimensions and weight Length x width x height 1940 x 820 x 1600 mm Weight 150 kg Compressed air outlet coupling Capacity compressed air tank 270 lt

Key data: 1000 , 3420 , 110

DEMAG SUMITOMO ERGOTECH 1000 T Injection Molding Machine - Year 2001 Machine with very low working hours Type: 1000-8000 NC4 Clamping Force: 1000 T / 10 000 KN Screw Diameter: 110 mm Theoretical Injection Volume: 3801 cm³ Injection weight. : 3420 gr Opening Stroke: 1250 mm Daylight : 2450 mm Distance Between Tie bar : 1400 x 1120 mm Platen Dimensions: 1950 x 1670 mm Mold tickness min/max : 500 /1200 mm Total Installed Power: 110 kW Oil Capacity: 2000 L Dimensions: 13.2 m x 3,20 m x 2,90 m Weight: 63 tons Machine sold with a STAR robot

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

General SKU397X1141 MakeDSP TypeEF800 No.WS-153 Mach.No.WS-153 Year of construction1999 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Surface0.5 m2 Specified Features - Nutsche filter MaterialStainless steel 1.4571 (316Ti) Nutsche filtercheck Nutsche filter/dryercheck Filter surface0.5 m2 Capacity400 l Vessel sizesø 800 x 620 mm Vessel can be tiltedcheck Top connectionscheck Liquid outletcheck With jacketcheck Max. temperature165°C Cake capacity400 l Information LocationBarneveld Mounted on wheelscheck Floorspace1,52 x 0,8 m Total height2 mNutsche filtersDSPFilters > Nutsche filtersBrand > DSP What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the ma ...

General SKU397W1234 MakeMinox LocationBarneveld CEcheck TypeMTS-V2-800/1 Main Features MaterialStainless steel Surface0.5 m2 Sizes diameter800 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,5m² Number of sieve decks:1 With covercheck InletDia. 100/200 mm OutletDia. 300 mm Drive vibro motor2x 0,22 kW, 230-240/380-415 volt, 1500 rpm MaterialStainless steel 1.4301 (304) Information No.X10695 Year of construction2020 Mounted on mild steel framecheck Floor space1,40x1,00 m Total height0,50 m Weight180 kg Extra SpecificationsWithout sieveVibro sievesMinoxSieves > Vibro sievesBrand > Minox What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ...

General SKU397W1235 LocationBarneveld CEcheck MakeMinox TypeMTS-V2-800/1 Main Features MaterialStainless steel Surface0.5 m2 Sizes diameter800 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,5m² Number of sieve decks:1 OutletDia. 300 mm Drive vibro motor2x 0,22 kW, 230-240/380-415 volt, 1500 rpm MaterialStainless steel 1.4301 (304) Information No.X10696 Year of construction2020 Mounted on mild steel framecheck Floor space1,40x1,00 m Total height0,40 m Weight190 kg Extra SpecificationsWithout sieve and coverVibro sievesMinoxSieves > Vibro sievesBrand > Minox What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This WAGNER WDE 800x2000 was manufactured in 2010. A robust horizontal turning machine, it offers reliable performance for various machining tasks. Ideal for those looking to enhance their turning capabilities. Contact us for more information.

B&A REF: 9271 TON:800 SCREW DIAMETER: 110MM SHOT WEIGHT: 4720 STROKE VOLUME: 5160CM3 INJECTION PRESSURE: 1620AR PLATEN SIZES: 1550 X 1400MM DBTB: 1100 X 950MM MIN MOULD HEIGHT: 400MM MAX MOULD HEIGHT: 1100MM MOULD OPENING STROKE: 1080MM MAX DAYLIGHT: 2180MM EJECTOR STROKE: 350MM CONTROLS: TACTUS CORE PULLING: 3 AIR VALVES: 4 MOTOR: 37 + 37 HEATING CAPACITY:37 KW ROBOT : STYRAM S10-L SERVO SCREW DRIVE: ELECTRIC

General SKUR1215 LocationBarneveld MakeDiosna (D) Main Features MaterialStainless steel Volume800 Ltr. Motor55 KW Specified Features - Universal mixer MaterialStainless steel 1.4401 (316) Universal mixercheck Capacity800 ltr. Vessel sizesdia. 1200x700mm With covercheck Inletdia. 250mm (1x) dia. 20mm (1x) dia. 100mm (1x) dia 50mm (1x) dia. 32mm (2x) Pneumatic operated outletcheck Outletdia. 200mm With motor55 kW 400 volt (Ex) Rotor speed127 rpm With lump breakercheck With motor13 / 16 kW 400 volt (Ex) Rotor speed1435 / 2930 rpm Information TypeP-800B Mach.No.294-009 Year of construction2004 Mounted on framecheck With switchgearcheck Floorspace2,7x1,9 M Total height2,9 M Weight5000 Kg ATEX compatiblecheckUniversal mixersDiosnaMixers > Universal mixersBrand > Diosna What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compa ...

This 5-axis DMG MORI CTX beta 800 TC was manufactured in 2014. It features a main spindle speed of 5,000 RPM and a sub spindle speed of 6,000 RPM, along with a 30-piece tool magazine. Ideal for complex turn-mill operations, consider the opportunity to buy this DMG MORI CTX beta 800 TC turn-mill centre. Contact us for further details regarding this machine.

General SKU418S1034 MakeMVG-Metallbau- und Vetriebs- GmbH Type8000304 Machine number22569/91116 Year of construction1991 Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure jacket3.5 Bar Main Features MaterialStainless steel Volume427 Ltr. Surface2.84 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel trayscheck Heating surface2,84 m² Drying chamber capacity427 Ltr. Drying chamber sizes670x950x670 mm Max. temperature95 °C Number of trays5 Tray sizes600x945x25 mm Distance between the trays95 mm With 1 doorcheck With vacuum pumpcheck Motor2,2 kW 220-380 Volt MaterialStainless steel Information LocationBarneveld With switchgearcheck Floorspace1x1,5 M Total height1,9 M Weight1450 KgTray dryersMetallbau- und VertriebsDryers > Tray dryersBrand > Metallbau- und Vertriebs What you can expect from Foeth: -- Machine is in working ...

This 5-axis DMG MORI Beta 800 TC was manufactured in 2015. It features a Siemens sl Operate 3G control, a counter spindle with a C axis, and dual chucks on both main and counter spindles. Equipped with a 48-tool HSK 63A chain magazine and a coolant system capable of 8/20 bar, its ideal for complex turn-mill operations. Consider the opportunity to buy this DMG MORI Beta 800 TC turn-mill centre. Contact us for more information about this machine.

SIPA Band Saw Model 800 TOP made of steel: - upper spoke flywheel, full lower flywheel - Motor 4 kW / 5.5 HP, 380 volts - with upper and lower blade guide - tilting table

This DMG ecoMill 800v was manufactured in 2016. It features an impressive X-axis travel of 800 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1100 x 560 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMG ecoMill 800v vertical machining centre we have for sale. Contact us for further details.

This 3-axis KOVOSVIT MAS MCV 800 QUICK was manufactured in 2018. It features an X-axis travel of 800 mm, Y-axis travel of 500 mm, and Z-axis travel of 550 mm. The machine includes a robust table size of 1000 x 500 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the KOVOSVIT MAS MCV 800 QUICK vertical machining centre we have for sale. Contact us for further details.

General SKU203S014 MakeFilmac srl S/L Filtration (It) LocationBarneveld CEcheck TypeFiltropressa BC-800.40(35).25 Pressure Working pressure16 Bar Main Features MaterialPolypropylene Pressure16 Bar Surface33.6 m2 Specified Features - Filterpress Filter presscheck Filter surface38,3 m² Recessed chamber platescheck Number of platens35 Internal platen sizes740x740 mm External platen sizes800x800 mm Platen thickness60 mm With membranes on platenscheck Cake capacity191,6 Ltr. Central inletdia. 80 mm Connectionsdia. 80 mm With outlets on platenscheck Hydraulic closingcheck With hydraulic unitcheck Motor14,4 kW 230/400 Volt MaterialPolypropylene Information No.91137 Year of construction2000 With switchgearas is Floorspace5x1,6 m Total height2 m Weight4500 kgFilterpressesFilmacFilters > FilterpressesBrand > Filmac What you can expect from Foeth: -- Machine is  ...

This 3-axis MIKRON VCP 800W Duro was manufactured in 2004. It features a Heidenhain iTNC 530 control system, with X, Y, Z travels of 800 mm, 650 mm, and 500 mm respectively. The machine includes a high-velocity spindle capable of 20,000 rpm and a 30-position tool magazine. Ideal for precision machining, consider the opportunity to buy this MIKRON VCP 800W Duro vertical machining centre. Contact us for more information about this machine.

x-travel: 700 mm y-travel: 350 mm z-travel: 450 mm table surface area: 940 x 510 mm spindle taper: SK 40 spindle turning speed range: 32 - 1600 U/min feed - longitudinal/cross: 8 - 400 mm/min feeds vertical: 4 - 200 mm/min total power requirement: 4,5 kW weight of the machine ca.: t dimensions of machine L x W x H: 1,85 x 1,62 x 1,83 m Accessories: vertical head with quill retraction, univ. table, counter bearing, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-axis MCM CLOCK 800 MP4 was manufactured in 2000. It features a Fanuc 16 I control, X-axis travel of 700 mm, Y-axis travel of 700 mm, Z-axis travel of 800 mm, and a B-axis rotation of 366°. Equipped with a high-speed spindle at 20,000 rpm and a high-pressure system at 65 Bar. It includes a chip evacuator and a tool magazine with 72 positions. Contact us for more information about this machine.

Key data: 800 kN

Arburg 420C 800-250 Year of Make: 1999 Injection unit: Screw diameter: 35mm Injection weight: 121 g Spray pressure: 1820 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Very good technical condition Machine has produced injection molded parts for the medical industry - pure production conditions Euromap 12 Robot interface Core train control Hardened injection unit - Bimetal Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participa ...

Tool milling machine MAHO MH 800 -Travel X/Y/Z 700-350-450mm -Table surface 940x510mm -Spindle holder SK 40 -Spindle speeds 32-1600 rpm -Automatic longitudinal/transverse feeds -Automatic feed / vertical milling head -Coolant device -Various tool holders -More technical data / See photos Dimensions: LxWxH 1.9x1.7x1.9 meters / Weight: 3500Kg Errors / input errors excepted Hjbkn Ausvbrf Ae S Tsl

WEILER Intern 800R Ladder & Pull Spindle Lathe -Turning diameter over bed 300mm -Turning diameter over support 150mm -Turning length 800mm -Spindle bore 42mm -Speed range 40 - 2000 rpm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK 3 -Drive power 3KW -Multifix with inserts -Three-jaw chuck 160mm -Lining protection -Swarf back wall with work light -Interchangeable wheels -Drill chuck -Rod passage 42mm -Tool cabinet -Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 750Kg

Arburg 420C 800-250 with the Wittmann W721 robot Year of Make: 2004 Injection unit: Screw diameter: 30 mm Injection weight: 89 g Spray pressure: 2470 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 2 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Built-in system for printing quality control from the Kistler brand sensor - measurement of tool pressure Original Tool Crane Robot Wittmann W721 Year of Make: 2007 4-axis robot: 3 axes are driven by servo motors (electric); Axis C Travel in axes: X-550, Y-1200, Z-1250 Touch control panel Robot with adapter Pu ...

Key data: 800 kN

Arburg 420C 800-250 with the Anvil+Langbein sprue picker Year of Make: 1999 Injection unit: Screw diameter: 40 mm Injection weight: 158 g Spray pressure: 1390 bar Dosing volume: 188 ccm Clamping unit : Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Control with air valve Core train control Hardened injection unit - Bimetal Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On  ...

Arburg 1200T 800-150 / Vertical injection moulding machine with the rotary table Year of Make: 2005 Injection unit: Screw diameter: 25 mm Injection weight: 45 g Spray pressure: 2500 bar Dosing volume: 54 ccm Clamping unit: Clamping force: 80 t Spar spacing: 0x0 mm Size of the clamping plates: 1200 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Air Valve x 6 Hydraulic core pull x 6 Control with hot runners Hardened injection unit - Bimetal Rotary table diameter: 1200 mm Kistler Sensor - Tool Pressure Control Machine has been serviced by the authorized service Arburg in Germany Dimensions: Weight: 7400 kg Length/Width/Height: 3.92x1.61x3.78 m Drive: Pumps/motor: 22 kW Heating capacity: 9.4 kW Total power: 31.4 kW All offered machines are started by our service technicians before they are sold. It is possibl ...

Key data: 800 kN

Arburg 420S 800-350 Year of Make: 2003 Injection unit: Screw diameter: 50 mm Injection weight: 250 g Spray pressure: approx. 1300 bar Dosing volume: 288 cc Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air Valve x 1 Core train control Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Integrated original Arburg sprue picker on the side Dimensions: Weight: 3800 kg Length/Width/Height: 4.06x1.39x2.12 m Drive: Pumps/motor: 18.5 kW Heating capacity: 10.2 kW Total power: 28.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or ...

Arburg 420C 800-250 Year of Make: 2004 Injection unit: Screw diameter: 30 mm Injection weight: 89 g Spray pressure: 2470 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Hardened injection unit - Bimetal Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 1300 kN

Arburg 520S 1300-800 / Machine in very good technical condition Year of Make: 2008 Injection unit: Screw diameter: 50 mm Injection weight: 359 g Spray pressure: 2000 bar Dosing volume: 392 ccm Clamping unit: Clamping force: 130 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Euromap 67 Euromap 12 Robot interface Air Valve x 2 Hardened injection unit - Bimetal The machine was regularly serviced by the authorised service Arburg in Germany Dimensions: Weight: 6450 kg Length/Width/Height: 4.81x1.57x2.19 m Drive: Pumps/motor: 30 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or ...

Key data: 2000 kN

Arburg 570H 2000-800 e² / Hybrid machine / Production line with the Arburg Multilift Select robot Year of Make: 2011 Injection unit: Screw diameter: 50 mm Injection weight: 359 g Spray pressure: 2000 bar Dosing volume: 392 ccm Clamping unit: Clamping force: 200 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 2 Control with hot runners x 12 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Central lu ...

CNC Vertical Machining Center "BRIDGEPORT VMC 800" With track control Heidenhain TNC 410 Year of Make: 2000 Travels: X 800 Y 500 Z 500 Speed range: 0 – 10,000 rpm infinitely variable With the following accessories: Rigid angle table 1000 mm x 500 mm clamping surface Vertical tool changer with 20 magazine positions ( SK 40 ) Full protection cabin with sliding doors and interior lighting Various tool holders SK 40 Electronic handwheel Coolant device with reinforced pump 20 bar Chip conveyor Operating instructions

Cylindrical grinding machine manufactured in 2022. This ELMAG CG 800 features a maximum grinding diameter of 200 mm and a grinding length of 800 mm. It is equipped with a robust headstock spindle and transverse feed guide, ensuring precision in grinding operations. If you are looking to get high-quality grinding capabilities, consider the ELMAG CG 800 machine we have for sale. Contact us for further details.

Veneer technology Wolkenstein veneer assembling machine LZM-LA SE 800 ex location for sale.

6 feeders, Hand feeder, Cover feeder, Stitching unit, 2x 52/8 stitching heads, Trimmer, Spare knifes, books tools and standard parts Machine nr: 08.004

Key data: 5000 mm, 8000 mm, 4000 mm

Berthiez Vertical Turning Lathe • Year of manufacture: 1982 • CNC type: older system (CNC axes) Dimensions and Working Parameters • Table diameter: 5000 mm • Maximum turning diameter: 8000 mm • Maximum turning diameter at center: 5000 mm • Maximum workpiece height: 4000 mm • Ram travel (T): 3600 mm • Saddle travel (TA): 650 mm Speed and Power • Table rotation range: 0.6 – 60 rpm • Table motor power: 140 kW • Maximum load on hydraulic support: 160 t • Ram feed speed: 400 mm/min • Saddle feed speed: 2500 mm/min • Spindle rotation for milling: 0.01 – 0.50 rpm • Positioning speed: 0.001 – 0.50 rpm Tool Carriages 1. Hand-Operated (Primary) Carriage • Kulannum section size: 360 × 360 mm • Axial travel (CA): 2500 mm • Horizontal travel (CB): 3400 mm • Tilt range (E-F): 15° – 45° 2. Side Tool C ...

Overview This microbrewery had to cease operations in recently. The original plan was to continue operations, but as this did not happen for various reasons, the entire equipment is now being sold as a whole. Equipment Steam generator with gasoil burner and its tank. Three-phase mill for grain grinding. 800-liter brewhouse with steam jacket consisting of boiler, filter tank, lung, liquor tank, tubular cooler, accumulated osmotized water tank, and 3 necessary pumps for its operation. Industrial osmosis and descaling equipment. 4 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1000 liters. 3 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1300 liters. 1 cooling system for fermenters with temperature control panel by PLC. 1 cleaning pump. 1 transfer pump. Several hoses necessary for transfers and packaging. 1 atmo ...

Manufacturer: Keyence Model: IM-8000 Type: Image Dimension Measurement System Software Version: B-13.0.0.28-11.07-20.07.09.01 / A2.05-A1.27-A3.03-9B.06-9B.06-02.01-03.02 Sensor: 20-megapixel CMOS Stage Size: 300 x 200 mm Measurement Capacity: Up to 300 features in a single measurement cycle Condition: Used, fully functional Find more here - / Contact us at -

CNC vertical machining center Type: VCE 800 Pro Manufacturer: GF Mikron Year: 2016 Control: Heidenhain TNC 620 X: 800 mm Y: 500 mm Z: 540 mm Table: 910 x 500 mm Max table load: 1100 kg Max spindle speed: 10000 rpm Tool magazine: 24 positions Machine weight: 5000 kg Cooling and air through the center of the spindle. Tool probe Chip conveyor Machine in good condition, under power Find more here - / Contact us at -

Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1475 mm Free frontal opening L-R: 3700 mm Free lateral opening F-B: 2300 mm Table surface area : 3600 x 2200 mm Slide area: 3500 x 2070 mm Die cushion capacity in table: 150 ton Die cushion stroke: 250 mm Die cushion pad area: 2780 x 1570 mm Ejector in ram: 60 ton Ejector stroke in ram: 150 mm Number of strokes: 7 - 21 s.p.m. Required power: kW Height over floor approx.: 9510 mm Weight of machine approx.: 260 ton

pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.