700 hf used for sale

pressure: 100 t chamfer lenght: 3140 mm distance between columns: 2700 mm column arm: 420 mm dayligth: 470 mm stroke: 200 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 100 mm/sec table width: 60.0 mm table height: 960 mm oil volume: 150 L 0: 300 bar controlled axis: 8 Anzahl Number of working hours: 47.800 h total power requirement: 12.5 KW weight of the machine ca.: 7150 kg range L-W-H: 4295 x 2285 x 2635 mm maintained condition () with approx. 47.800 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) swiveling operation - front left Tool & program library - CNC-controlled back gauge adjustment (X1+X2 axis) Adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop fingers (R1+R2) Adjustment range .. 250 mm - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device f ...

Description: Maximum tonnage: 1000kN CN AMNC 4 AXES Equipped with high speeds bending length 3110mm Clearance between uprights 2705mm Gooseneck depth 420mm Motor power 17kW Maximum stroke: 200mm throat: 420 mm, Max. pressing force: 10 to, bending length: 3,110 mm, number of controlled axes: 4, total power requirement: 17 kW, weight approx.: 15,000 kg, Approx. Onsite Dimension. (l x w x h): 4,500 x 2,000 x 2,700 mm

Description: Nominal force: 1 700 kN Beam width: 4 230mm Table width: 180mm Work surface height: 960mm Inlet: 450mm Actuator travel: 180mm Goose neck: 410mm Distance between end plates: 3760mm Max. pressure: 308 Bar Oil content: 150L Number of cycles: 4 Motor power hating: 11KW Pump activity: 20,7 n3/rev. Approachspeed: 100mm Working speed: 1>, 8 Retract >,80 throat: 410 mm, bending length: 4,230 mm, stroke: 180 mm, stroke speed -forwards: 100 mm/min, table surface area l x w : 4320x180 mm, total power requirement: 11 kW, weight approx.: 12,500 kg, Approx. Onsite Dimension. (l x w x h): 5,500 x 2,400 x 2,920 mm

saw blade protection: bei sägeblattdurchmesser 450 mm bis zu 125 mm, Approx. Onsite Dimension. (l x w x h): 1,400 x 800 x 700 mm, weight approx.: 150 kg

Description: Technical data Saw blade projection for saw blade diameter 450 mm to 125 mm Collet opening 130 mm Main saw motors 18 kW each Scoring saw motors 2.2 kW each W.02 number : 9105 QUICK CLAMPING DEVICE 'POWER-LOC' FOR HS Patented quick clamping system with high axial clamping force. Simple operation, working without without compressed air. W.04 Number : 9115 QUICK CLAMPING DEVICE 'POWER-LOC' FOR VS Patented quick clamping system with high axial clamping force. Simple operation, working without compressed air. Translated with www.DeepL.com/Translator (free version) cutting height: max 125 mm, main saw blade: 450 mm, main motor: 18 kW, scoring saw: 2,2 kW, Approx. Onsite Dimension. (l x w x h): 1,400 x 800 x 700 mm, weight approx.: 150 kg

4 radios incl. accessories

Press brake AMADA HFE 220-3 Number of controlled axes / CNC controlled axis: 7 Condition good, ready to use, visit under electricity possible / Condition: good, in use, can be seen under power in Poland Pressure / Pressure: 2200 kN / 220 ton Bending length / working range: 3100 mm Distance between stands / distance between columns: 2700 mm Stroke / stroke: 200 mm Delivery speed / downwards speed: 1-100 mm/s Working speed / working speed: 1-10 mm/s Retraction speed / backwards speed: 1-100 mm/s Dimensions Machine / Machine's dimensions: 4.3 x 2.3 x 3.1 m Weight / Weight: 14 ton Machine has: new safety cards from Pilz, new tool clips, new keyboard of control, new stop finger Machine has: new safety cards by Pilz, new tool clamps, new CNC cover, new back gauge fingers

Built in: 2004 Rebuilt: 2017 Equipment: stitching unit for Ferag UniDrum; working condition

Waterjet cutting system mobile Manufacturer Schmidt, Krantz & Co GmbH / Woma Maximator WS103 HFA-HD-Aggregat Maximator waterjet cutting system Waterjet cutting with 2,500bar Foerder power 2.3l/min Cutting head handbetaed, manufacturer Woma Weight 1,000KG External hydraulics with max 350 litres of foerder power required, not included!

Stitching Machine

Press brake: Amada HFE 170-3 Year of construction / Year: 2000 CNC 8 axis: 2Y + 2X + 2Z + 2R Pressure / Pressure: 170 ton Bending length : 3000 mm Stroke / stroke max. 200mm Weight / weight: 11.6 ton

Longitudinal saw Irion Cutting length approx. 3 m Stop adjustable for cutting width by handwheel Saw blade diameter 550 mm Saw with hydraulic feed Saw drives up, drives through from front to back, lowers and goes back under the table

- Updated CNC ? Task 84 Titano plus, year 2016 - Pneumatic tie downs - Open Height: 0 mm - Hole: 0 mm - Backgauge movement: 0 mm - Table width L -R: 0 mm - Inclination of beam: 0 mm - Operating hours: 0 - Type: 0 - Pressure force: 100 t - Bending length: 3.100 mm - Axes: 7 - Working area: 0 mm - Distance between uprights: 0 mm - Returning speed: 0 mm/seg - Frame type: 0 - Working speed: 0 mm/seg - Locking speed: 0 mm/seg - Throat: 0 mm - Control: CNC TASJ 84 Titano plus 2016 - Stroke max: 0 mm - Oil tank capacity: 0 l - Power: installed max: 0 kW - Weight: 6.750 kg - Dimensions (long x wide x high): 3.750 ? 1.960 ? 2.650 mm

pressure: 15 t stroke: 160 mm press capacity: 147,15 kn Pressure power: 382,2 bar column daylight: 555 mm : 80 tank capacity: 1,5 l distance between columns: 134 mm weight of the machine ca.: 134 kg dimensions of the machine ca.: 825 x 600 x 1880 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We can offer Barmag FDY lines, winder model: ACW-5T, 1380mm/12 ends, hot godets model HF6, All ground floor equipments, just dismantled into warehouse.very good condition.Serious cintact us.

AMADA HFE 170-3 L CNC press brake was built in France in 2000. The machine designed for bending workpieces with a maximum length of 3100 mm, has seven numerically controlled axes (Y1, Y2, X1, X2, R, Z1, Z2) and 170 tonnes of press force. This allows for very high machining accuracy and, thanks to the deflection arrow compensation function, the desired angle is present along the entire length of the bent sheet. All machining parameters are programmed on the intuitive and easy-to-use AMADA CNC control located on the arm. The press was used for 15656 hours (5.5 years of operation at 8 hours per day). The total weight of the press brake is 12400 kg. Technical data of the AMADA HFE 170-3 L press brake - CNC controller: AMADA - maximum press force: 170 t (1700 kN) - number of numerically controlled axes: 7 (Y1, Y2, X1, X2, R, Z1, Z2) - maximum workpiece length: 3100 mm - deflection  ...

Press force: 130T Stroke: 350 mm 4 axis Weight:8860 kg

year of issue: 2009 Bending stick length: 3100 mm press force: 100 to

Folding length : 2000 mm 50 Ton Machine is in good condition

working time: about 48000 hours Bending length: 2600 mm Downforce: 80 to Control: Operator 2000 (Y, X, R, Z1, Z2)

Amada HFE 220-3 CNC Hydraulic Press Brake 220 Ton 3000 mm bending length 8 axis Machine is in good working condition Working hour : 17700 Tools are included

Force 170 T Bending length 3000 mm Distance between posts 2700 mm CNC AMNC Throat 420 mm Vertical stroke 350 mm Engine power 16.5 kW Length x width x height 4533.0 × 2650.0 × 3140.0 Weight 12750 kg

Amada HFT 130-3L Press brake cnc/nc Amada HFT 130-3L 2007r 2007

CNC SPINNING LATHE MANUFACTURER: M+M MODEL: HF450TT/2S SERIAL NUMBER: 26-2453-00 YEAR: 2000 CONTROL MANUFACTURER AND MODEL: Tracktronic Z-AXIS CENTER HEIGHT: 419mm DISTANCE BETWEEN CENTERS: 1200mm Z -AXIS TOOLING ADAPTER: DIN 55027/ Size 15 Z-AXIS DRIVE POWER: 80kW Z -AXIS DRIVE ZF REDUCTION RATE: 1:4 Z-AXIS DRIVE SPEED: 0-1000 RPM step less variable X - SLIDE TRAVEL: 500mm X - SLIDE FORCE: 100kN X - SLIDE VELOCITY: 400mm/min Y - SLIDE TRAVEL: 275mm Y - SLIDE FORCE: 100kN Y - SLIDE VELOCITY: 400mm/min TAILSTOCK TRAVEL: 600mm TAILSTOCK CLAMPING FORCE: 80kN EJECTOR TRAVEL: 450mm COOLANT: yes POWER 3PHASE / 50-60 Hz / 200 - 500 Volts: 3PH/60Hz/480V existing SPECIAL FEATURES OR ADDITIONAL ITEMS: POWER RATING 204 HP (152 Kw), CONTROL VOLTAGE 110VOLT / 24 VOLT DC MACHINE WEIGHT: 22000 kg CONDITION: EXCELLENT - VERY LIMITED USE

Synchronized electronic press brake Amada HFE M2 220/4 L Numerical control 8 axes with 2 sheet metal attendants 75 kg each managed by CNC

Used Schiavi HFB 100 - 30 Press brake cnc/nc 3 meters 100 tons. 7 axes in very good condition

Capacity 6100 x 220 tons Y1, Y2, X1, X2, R1, R2, Z1 and Z2 CNC controlled Amada quick change system

never used System • Dimension mm 1700 x 1050 x h 1350 • Vertical Box Motion system • Power 400 Volt 50 / 60 Hz • Air supply 6 Bar Technical • Max Film mm up to 720 • Max Speed 25 ppm • Max Jaws mm up to 310 • Max Length Pack mm up to 400

This AMADA HFB 125 Bending machine was made in 1999 in France. It is equipped with an Amada Operatour control unit and has 8 axis. The machine has a bending length of 3000 mm.

This AMADA HFT 50-20 Bending Machine was manufactured in 2009 in France. It has a maximum press force of 500 kN, a maximum stroke of 200 mm and a foreseen power of 6 kW. In total is weighs 4.7 tons. This press brake has operated 11,377 hours so far. Check photo gallery for more details. Contact us anytime for further questions!

This AMADA HFT50-20 (2007) Bending machine was manufactured in 2007 in France. It is equipped with a bending force of 50 tons and a bending length of 2085 mm. Distance between uprights is 2665 mm and the vertical stroke at 200 mm. The machine counter shows 8337 hours.

Capacity: 250 - 400 ton V ? Ring nominal force: 20 - 200 ton Counter ram nominal force: 10 - 100 ton Ram stroke: 30 - 200 mm V-Ring stroke: 40 mm Counter ram stroke: 40 mm Max. die size: 765 x 760 x 610 mm Number of strokes: 40 s.p.m. Approach speed: 120 mm / sec Return speed: 135 mm / sec Working speed: 5 - 50 mm / sec Die Weight total: 2400 kg

Travel X/Y: 500 mm/200mm, max. speed: 4000 rpm. Max. Workpiece weight: 60kg, max. workpiece diameter/length: 225mm/20mm, table dimensions X/Y: 600mm/200mm. Dimensions X/Y/Z: 2800mm/2850mm/1650mm, weight: 1800kg. Loose contact on the magnet, machine is used with a sine table.

Working width/ height: 180/ 250mm, feed rate: 0.5-6m/min, connected load: 6.4kW, length: 2500mm, width: 1950mm, height: 2500mm, weight: 3t, including documentation, without accessories or spare parts.

TO WHOM IT MAY CONCERN ; WE VE 4 SETS USED GEA WESTFALIA HFO SEPARATORS OSD 35 AT OUR STOCK . SEPARATORS HAS ALSO CONTROL PANELS SEPARATOR DETAILS ON BELOW TYPE. : OSD 35 -136-067/35 SERIAL NO. : 9052-289 / 9052-288 / 9052-293 / 9052-206 YOB. : 2010 BOWL SPEED : 8200 SOLID kg /dm3 : 1.4 EX STOCK . READY TO TRANSPORT IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

220 ton x 4000mm

Machine type: Workshop press Manufacturer: RHTC Model: 50 TON HF2 Year of construction: new Offer type: new machine Specifications: Version: manual / 2 columns Compressive force: 50 t Working width: 750 mm Table: 750 x 336 mm Piston stroke: 160 mm Drive: manual and foot operation Weight: 340 kg This is a new machine offer. We therefore ask for your understanding that no demonstration is possible. We would be pleased if our offer finds your interest. If you have any questions, please do not hesitate to contact us. Errors, changes and prior sale excepted.

Machine type: Workshop press Manufacturer: RHTC Model: 30 TON HF2 Year of construction: new Offer type: new machine Specifications: Version: manual / 2 columns Compressive force: 30 t Working width: 565 mm Table: 565 x 255 mm Piston stroke: 160 mm Drive: manual and foot operation Weight: 165 kg This is a new machine offer. We therefore ask for your understanding that no demonstration is possible. We would be pleased if our offer finds your interest. If you have any questions, please do not hesitate to contact us. Errors, changes and prior sale excepted.

Machine type: Workshop press Manufacturer: RHTC Model: 15 TON HF2 Year of construction: new Offer type: new machine Specifications: Version: manual / 2 columns Compressive force: 15 t Working width: 560 mm Table: 560 x 214 mm Piston stroke: 160 mm Drive: manual and foot operation Weight: 117 kg This is a new machine offer. We therefore ask for your understanding that no demonstration is possible. We would be pleased if our offer finds your interest. If you have any questions, please do not hesitate to contact us. Errors, changes and prior sale excepted.

Pressbrake / Press brake AMADA HFE M2 1003 Bending length 3100mm Pressure / Druk 100 ton CNC 4 axis / CNC 4 axes Year of manuf. / Year of construction 2012.10 Condition / Condition: very good, ready for operation / very good, ready for immediate use Bending tools not included / without bending tools

Incl workbench size approx. 400x70x95cm

Equipped with base: 60x50x85cm

- Table surface: 1 880 x 500 [mm] - maxi grinding length: 1 200 [mm] - maxi grinding width: 550 [mm] - maxi height table and spindle center: 775 [mm] - maxi weight on the table under magnetic plate: 1 600 [kg] - magnetic plate dimensions: 1 200 x 500 [mm] - Spindle rotation speed: 1 400 [rpm] - Grinding wheel maxi dimensions: 400 x 100 x 27 [mm] - Spindle power: 18 [KW] - Dimensions: 5720 x 3630 x 2390 [mm]

WALDRICH SIEGEN HFB-200 CNC Horizontal Boring & Mill MC Built 1978 / 2007 X=15.000, Y=5.000, Z=1.500, W=1.200mm Spindle diam. 200mm ISO 50+60, 90kW SIEMENS 840 D ATC 90 Table 5.200x5.200mm, X travel 3.300mm max. loading 100 Ton Rotation 360.000° Floorplates 6.000 x 10.000mm Hydrostatic Many heads This machine was used in final cutting and boring, drilling of big vessel engine cylinder blocks in STX Engine. It can be done the straight and inclined direction drilling &boring. It means the spindle head can be tilted. It is very high accuracy machine. This machine is in assembled condition but not under power

HOLTEC HFT 21 packet cutting drip saw automatic feed – year of manufacture 1986 – German production – electric roller feed Technical parameters: - engine power 11 kW - guide length 1700 mm - package width 1300 mm - package height 1300 mm - cutting length max 4500 mm - roll width 1300 mm - spacing between rolls 900 mm - roll diameter 160 mm - height of rollers from the base 730 mm - total length 9400 mm Transport dimensions 650 x 200 x 256 cm weight 2000 kg

bore capacity in steel (diameter): 100 mm arm length: 3000 mm workpiece height max.: 2500 mm bore capacity in cast iron: 120 mm core boring capacity in St 60 - reboring: 170 mm threading: M120 x 2 diameter of quill: 100 mm spindle taper MT: 6 turning speeds: 18-1800 U/min Feed: 0,037-2 mm/U surface area: 1550x3150 mm total power requirement: kW weight of the machine ca.: 14 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity 220 ton Lenght 3000 mm Number of axes 8