130,399 used machines on RESALE, but how to find them? Machine Search
; Gross weight [kg]: 1650; Engine: Iveco NEF45TM3.S500; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and Battery charger, Including: sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 185
Koelle Edge Planer Model FKF 51 Built in 1993 max material thickness 45 mm, Machine size L 304 x W 65 x H 87 cm, Joining head with carbide reversible knife mobile Weight approx. 360 kg The machine is in good condition, ready for use. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12
; Power [PS]: 68; Gross weight [kg]: 1176; Engine: Cummins 4BTA3.9-G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 87
; Gross weight [kg]: 1034; Engine: Cummins 4B3.9-G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55
Eccentric shaft for hot forging press K8548 6300T Weight, kg 27 800
Drive gear for hot forging press K8548 6300T Weight, kg 15 700
Driven gear for hot forging press 6300T Weight, kg 1300
; Gross weight [kg]: 1195; Engine: Perkins 1103A-33TG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : 125A - 63A - 32A - 16A; Water Tank Volume [l]: 87
- Make: Copper mill - Type: Vuin-plus 600 - Year of construction: 1991 - Working width: 600 mm - Working height: 250 mm - Working height 4-sided: 200mm (up to 250 mm possible) - Number of working shafts: 5 (+2 chamfer units at the top) - Wave arrangement: bottom-up-right+left-down - Lower and upper knife shaft with 4-reversible Leitz Sinus knives - Right and left planer head with 4 reversible blades - Lower fifth shaft for saw blades, profiles, plaster shaft, etc. - Spindle diameter: X-X-40-40-40 mm - Motor power(s): 11-15-11-11-11 kW - Chamfer motors top: 2 x 1.85 KW - Feed speeds: 4-30 m/min - Feed motor: 4 kW - Driven rollers in the table: 3 - Top feed rollers: 4 - Pull-out transport rollers: 2 - Table height constant: approx. 900 mm - Weight: approx. 3800 kg
Clutch hub for hot forging press K8548 6300T Weight, kg 7100
Refrigeration dryer Manufacturer: KAESER Type: TE 121 Year of Make: 1999 Rated motor power: 2.1 kW Maintenance carried out by Kaeser.
Used Glatt mixer for powders in bins. Type: Kontainer Mischer. Year of construction 1996. Leg spacing: 105 cm Paw length: 100 cm.
; Gross weight [kg]: 2350; Engine: Iveco NEF67TM7.S500; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including: sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 224
- Robot Kuka KR 8 r1420 arc HW AS NEW CONDITION - controller KR C4 compact Mmxwykv - custom metal base This KUKA KR 8 R1420 arc HW robot was manufactured in 2016. Originating from Germany with a load capacity of 8 kg and a reach of 1421 mm, it weighs 179 kg and is powered by the compact KR C4 controller.
Roller table for transferring crates or trays or similar
; Gross weight [kg]: 2482; Engine: Cummins 6CTAA8.3-G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 63A - 32A; Water Tank Volume [l]: 224
cutting diameter: 305 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The Kaeser ASV60 is a high-quality rotary screw vacuum pump designed for efficient and reliable vacuum generation in industrial applications. Engineered for continuous operation, this unit delivers stable vacuum performance with low energy consumption and minimal maintenance requirements. Built with robust components and advanced screw technology, the ASV60 ensures long service life and dependable operation even in demanding production environments. Key Features: Rotary screw vacuum pump technology Designed for continuous industrial operation High efficiency and energy-saving performance Low noise and vibration levels Reliable and low-maintenance design Integrated control system
Sheet metal splitting and cut-to-length line for processing sheet metal coil material Max. width: 1,250 mm Min. width: 250 mm Sheet thickness steel up to 400 N/mm²: 0.4 – 1.25 mm Sheet thickness stainless metals up to 550 N/mm²: 0.4 – 0.9 mm Sheet thickness aluminium and copper: 0.5 – 1.5 mm Min. sheet cutting width: 60 mm /15 mm from coil outer edge Max. cutting speed: 30 m/min adjustable Cutting accuracy: Class "m" DIN/ISO 2768 (± 0.8 mm/m) Current: 3PH 400-488V AC/n/PE-11kW/16A (300mA fuse) Compressed air: 25 l/min (short-term)-6 bar dry and filtered Dimensions: 1.6x2.5x1.3 m Weight: 1.5 t
Distance between centers: 1000 mm, Height of points: 230 mm, Main engine power: 9.2 Kw, Working wheel dimensions (od x id x width): 500x80x203.2mm, Ø max to be rectified: 460 mm, Tailstock cone: MORSE 4, Workpiece head cone: MORSE 5, Max. Z axis travel : 1115 mm, Max. X axis travel: 260 mm, Approximate dimensions (length x width): 440x370 cm, Approximate Weight: 4700 Kg
KOMA CDS SunRiser refrigeration and proofing machine Internal dimension length 340cm x width. 240cm x H 250cm External dimensions length 350cm x width. 260cm x H 270cm
; Gross weight [kg]: 803; Engine: Perkins 404D-22TG; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : 32A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55
Width 78 cm Year of construction 2006 Round Stack Feeder RFH-82 Upstream knife shaft 6 fold pockets in the parallel fold section Automatic folding pocket adjustment Automatic folding roller adjustment Downstream knife shaft 2 folding swords in the crossfold section 1 more fold pocket after the 1st cross break Noise Insulation Hood without display partially overhauled (new folding rollers) Machine condition: cleaned and checked Price on request. We deliver and install worldwide!
; Gross weight [kg]: 13396; Engine: Cummins KTA50-G23; Accessories: Battery, Control Panel, Including: Coolant heater and battery charger
; Gross weight [kg]: 16583; Engine: Cummins KTA50-G23; Accessories: Battery, Control Panel, Including: Coolant heater and battery charger
used
Table clamping surface: 750 x 450 mm Travel x/y/z: 600/400/600 mm Spindle mount: SK 40 ISA small/large distance table/spindle: 90/690 mm Spindle speeds: 50 - 8000 rpm Number of tool locations: 24 pieces electr. Connection: 380 V, approx. 15 kVA kW Space requirement: 2500 x 2500 x 2800 mm Weight: 3200 kg
Magnetic table 455 x 170 mm Digital Water tank Pulling device Wet grinding device
Nominal force, tf 1000 The slider does not reach BDC, mm 12.5 Slider stroke, mm 600 Frequency of continuous strokes, min-1 12...18 Highest frequency of single strokes, min-1 9...13 Closed height, mm 1500 Adjustment of closed height, mm 400 Slider dimensions, mm from left to right 4500 front to back 2500 Dimensions of the die plate, mm from left to right 4500 front to back 2500 Main drive electric motor power, kW 200 Overall dimensions, mm from left to right 6745 front to back 5400 height above floor level 9360 Weight kg 320000
; Gross weight [kg]: 12692; Engine: Cummins KTA50-G23; Accessories: Battery, Control Panel, Including: Coolant heater and battery charger
NNP cooking kettles Stainless, cooking and mixing system on skid, two 350L mixing tanks, with Alfa Laval GM1 centrifugal pump and Randolph 600 series peristaltic pump, jacketed tanks, adjustable temperature and variable speed pumps, 3Ph
; Gross weight [kg]: 9613; Engine: Cummins KTA50-G3; Accessories: Battery, Control Panel, Including: Coolant heater and battery charger
Case Maker Co-pilot system with touch screen for automatic size setting, menu guided make-ready and fault indication. Twin board pre-loading conveyors Twin board magazine feeders Central soft spine feeder with double reel holder for auto-splice and cutter for waste Magazine feeder of pre-cut cloth with miss control Mobile hot-melt gluing unit Heated glue application roller with scraper roller Cloth cylinder with grippers & exchangeable plates for rubber pad Counter shingle delivery with roller conveyor External glue application adjustment Glue viscosity device for automatic water supply control Pressing roller for crease-free cover to board application Single case request for operator set-up Variable DC drive Automatic lubrication Including accessories & manuals.
Traglsat: 7000kg Load center of gravity: 600mm Battery: 80V SN: T322080279
Processing plant Manufacturer: KORUMA Maschinenbau (Neuenburg) Year of construction: 1987 with processing vessel (diameter: approx. 300 mm) with 2 feed tanks, 1 of which is double-jacketed (diameter: approx. 150 mm each) with scraper agitator with sight glasses with temperature gauge with control cabinet & control mounted on a stainless steel frame very good condition LWH: 1100 x 750 x 1450 mm
Kannegiesser belt conveyor GF 6250-680/600 RA1103 Make: Kannegiesser as good as new, exhibition machine Year of construction 2014 Conveyor length (FL): 6,250 mm Belt width (GB): 600 mm Nominal/outer width (NB): 680 mm Constant conveying speed: v=0.5 m/sec. Electrical data: 380V 0.25kW without control/connections to upstream and downstream conveyors Scope of delivery: without supports and side guides (please enquire if required) Optional: Supports Side guides on one or both sides Frequency inverter for stepless speed control Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2014 condition: as good as new (used) Conveying length in mm: 6250 Nominal / outside width in mm: 680 Belt width in mm: 600 Driven: YES Engine type: Nord KW: 0,25/S1 Ampere: 0,9 Conveyor speed m / s: 0,5 scope of delivery: without supports and side guides ...
Key data: 660 mm, 3000 mm, 440 mm
Sine 330/3000 D Well-maintained conventional lathe without mounted lathe chuck but with standard accessories The construction follows the classic design however, is based on a heavy, one-piece cast machine bed. How in the case of heavy lathes here, too, the adhesion between the engine and spindle via a manual Multi-plate clutch. With integrated Features such as the removable bed bridge, rapid traverse and a Taper turning device. WORKSPACE Workpiece length 3000 mm Turning diameter over bed 660 mm Circumferential Ø over support 440 mm Turning diameter without bridge 900 mm Bridge length 320 mm Bed width 400 mm TRAVELS X-axis travel 368 mm Travel Z1 axis 230 mm Swivel range upper slide 45° MAIN SPINDLE Spindle speed 25 1/min - 1600 1/min Spindle bore 105 mm Spindle holder D1-8 RUSH COURSE Rapid traverse X-axis 2000 mm/min Rapid traverse Z-axis 4000 mm/min ...
Working width: 2800 mm Roller width: 3000 mm Number of rollers: 2 Stück Supporting roller - dia: 340 mm Roller covering - soft rubber: 75 Grad shore Swimming roll - dia: 270 mm Roller covering - ebonit: 100 Grad shore Pressure line: 15 N / mm Pressure total: 16 to Cloth guiding system for woven fabrics: geb. Breitstreckwalze Liquor trough with guide roll: + Verdrängerkörper Drive side: rechts Operting side: links Drive shaft: dia 80 mm Hydraulic unit for separately pressure: Links-Mitte-Rechts total power requirement: 12 kW weight: 4000 kg range L-W-H: 3,6 x 2,2 x 2,8 mm • new control system from Küsters - delivered in 2008, • with quick cleaning, • without being overhauled, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 24191 Specifications: - Welding current max 250 A 30% ED - 180 A 60% ED - 140 A 100% ED - Welding current adjustable in 8 stages - 30 A / 15 V - 300 A / 30 V - 4 roller wire feeders infinitely adjustable - 2 stroke + 4 stroke regulation - Weld seam lengths - time setting - Hosepack air-cooled approx. 3 m - Ground cable -Reducer - Connection 400 V - Space requirement approx. W 550 x H 1090 x D 950 mm - Weight approx. 140 kg
Working width: 3400 mm Roller width: 3600 mm Number of rollers: 2 Stück Supporting roller - dia: 340 mm Roller covering - soft rubber: 75 Grad shore Swimming roll - dia: 270 mm Roller covering - soft rubber: 75 Grad shore Pressure line: 50 N / mm Pressure total: 18 to Clouth guiding system for knitted fabrics: geb. Breitstreckwalze Liquor trough with guide roll: + Verdrängerkörper Drive side: rechts Operting side: links Drive shaft: dia 80 mm Hydraulic unit for separately pressure: aus Edelstahl main drive motor: 15 kW total power requirement: 20 kW weight of the machine ca.: 6 t range L-W-H: 4,0 x 2,2 x 1,9 mm • 2-Bowl-Finishing-Padder with Supporting roll and S-Roll • driven expander in front of the squeezing nip, with adjustable guide roll for adaption of the enlacement at the expander roll. • Liquor trough pneumatically lift- and lowerable, with 1 guide roll at trough ent ...
Used KEMPER Lifting Kneader, Type: F 50 SL -Refurbished- - For 50 kg flour or 80 kg dough - Engine remounted - Clock new - Switch new - V-belt new - Control system attached to the machine or wall-mounted on request - Condition: Very good, ready to use Including delivery within Germany Visits and test runs are possible by arrangement.
; Gross weight [kg]: 1500; Engine: Kohler KDI2504TCRCAC-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 250
Perforating machine, espcially great for embroidery card punching Make Walter Kroll Model 900 Year 1960´s Working width 900 mm Tools 1 tool for Embroidery cards with 2 mm holes with 5 mm distance and 4 rows in 1 punch, 1 tear perforation tool with 1 mm holes Details this Hydraulic driven machine does have a mechanical "computer" that has so called tabs that can be put on/off and adjusted. this determines the pulling distance, also they are exchangable for another program that you can make yourself from a threaded rod. Available direct
Offer 24103 Specifications: - Working range of the axes - X / Y / Z 450 / 400 / 420 mm - Table size 850 x 250 mm - Max. distance from spindle to table 400 mm - Working spindle speeds horizontal 30 - 1275 rpm - Working spindle speeds vertical 66 - 2840 rpm - Feeds X – Y and Z axis - Rapid traverse - Drive 400 V / 3.2 kW - Space requirement approx. W 1400 x H 1800 x D 1400 mm - Weight approx. 1400 kg
; Gross weight [kg]: 1500; Engine: Kohler KDI2504TCRCAC-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : Coolant heater and battery charger; Water Tank Volume [l]: 250
; Gross weight [kg]: 1550; Engine: Deutz TD2.9L4-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : Coolant heater and battery charger; Water Tank Volume [l]: 250
Catalog No. : 7654 Type: MT 50 Producer: KOVOSVIT Made in: 2001 Characteristic: Control system: Siemens Sinumerik 810 D Maximum-turning length: 1500 mm Turning diameter over bed (max): 500 mm Workpiece weight: 350 kg Total power demand: 30 kVA Weight: 2500 kg Equipment: Chip conveyor Tailstock Knife head
Used continuous cutter SEYDELMANN, type: K206 DC8 -in used condition- - Speed variably adjustable and freely programmable - 2 speeds for reverse gear 80 and 160 rpm - Lifting tipper for 200 litre wagons - Head with 6 blades - Completely made of stainless steel - Separate Micro 114 control system in VA - Condition: used, technically tested, ready for immediate use Service: - Regular maintenance - Lubrication of the main shaft - Replaced fan bearings for cooling - Inspection of the main engine - Electrical inspection - The bearings of the main shaft are in good condition Specifications: Bowl volume: 200 litres Power: max. 100 kW Machine dimensions: 2,850 x 2,950 x 1,500 mm Control dimensions: 1,200 x 500 x 1,900 mm Weight: approx. 3,000 kg Inspection and test run possible on request.
maximum number of results exceeded
please refine your search
