70 k used for sale

Flame cutting machine, torch, oxy-fuel cutting machine, cutting torch, welding torch, hand cutting torch, welding set -Manufacturer: Auka Rhöna, burner set in a tin box -Burner sizes: 2-4 / 4-6 / 6-9 mm -Cutting torch: -Accessories: see pictures -Dimensions case: 450/190/H55 mm -Weight: 2.9 kg

Roller feed KAISER ZR 12 Belt width - 120 mm Feed length 100 mm Feed angle - adjustable - 90 - 180 degrees Tech. Condition - good, complete With pneumatics. Spare parts Btto 250 kg

Key data: 200 mm, 250 mm

Saw blade length 400 mm Power 0.53 / 0.78 kW Cutting speed approx. 15 / 30 m/min Vise opening width 190 mm Cutting area approx. approx. 200 mm approx. flat 240 x 190 mm

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist, spur gear hoist -Manufacturer: Yale, chain hoist , spur gear hoist -Load capacity: 1/2 ton -Chain length: 3.36 m -Quantity: 1 piece -Transport dimensions: 360/165/H250 mm -Weight: 13.1 kg

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Manufacturer: Yale, lever chain hoist -Load capacity: 3/4 ton -Chain length: 6 m -Quantity: 1 piece -Transport dimensions: 610/160/H150 mm -Weight: 11.7 kg

Korsch EK II single station eccentric tablet press, maximum tablet diameter 50 mm, maximum depth of fill 40 mm, Maximum pressure 120 kN. capacity up to 3600 tablets per hour using a single-tip tooling, machine net weight approx. 600 kg

Equipment: Precision Six-Jaw Chuck 1. Cylindrical grinding device Partial Setup Coolant system Instruction manual

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Manufacturer: Yale, lever chain hoist -Load capacity: 3/4 ton -Chain length: 5 m / 5.3 m -Quantity: 1 pieces -Price: per piece -Transport dimensions: 600/160/H150 mm -Weight: 11.1 kg

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Manufacturer: BKS, lever chain hoist -Load capacity: 3/4 ton -Chain length: 2.97 m -Quantity: 1 piece -Transport dimensions: 620/140/H140 mm -Weight: 9.3 kg

Key data: 6 mm

Type : K 30 – 120 Specifications: Sheet thickness 6 mm at 400 N/mm² 4 mm at 600 N/mm² Cutting length 200 mm Angle adjustment from 30 - 120 ° Drive power approx. 4 KW

Holset / KBB MR5-3 turbocharger suitable for MaK 8M25 Engine in good condition with reports available

Used freezer cell KOMA, type: - Large freezer cell for 55 to 60 rack trolleys - down to -25°C - Cooling capacity: 25.1 kW - Condition: very good - Location: Germany Viewing possible on request.

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Manufacturer: Yale, Lever chain hoist -Load capacity: 3/4 ton -Chain length: 2.54 m -Quantity: 1 piece -Dimensions: 600/130/H150 mm -Weight: 8.9 kg

Steam generator, evaporator -Vaporizer: Manufacturer KED, Kurt Ehemann/Type electric vaporizer -Number: 5x evaporators available -Price: per piece -Total dimensions: Ø 330 x 575 mm -Weight: 35 kg/piece

Manometer, test manometer, saw tension gauge -Manometer: Saw tension gauge -Type: 0 to 5000 kgs/cm² -Mounting: see photos, bore Ø 16 mm -Dimensions: 70/60/H160 mm -Weight: 1.0 kg

Safety relay, safety control, emergency stop switch, switching device, undervoltage relay, safety switching device, time relay, multifunction relay -Manufacturer: Klöckner Moeller, time relay multifunction relay -Type: TE-68 TE 68 -Number: 1x relay available -Dimensions: 80/25/H100 mm -Weight: 0.1 kg

Bottle washer, Fabr. Krones, type: Lavatec KESK-212/22-80, 22 bottles/row, with 80mm Cell division, plastic cells, with attached control cabinet in stainless steel, built in 1999, L: 7,955 mm, W: 4,216 mm, H: 3,270 mm, already dismantled and stored

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø47-55 mm, thread M60 see photos -Grindstone: Dorfnerwerk Type 5A 120-JOT8-UEH 400 x 20 mm -Transport dimensions: Ø 430 x 80 mm -Weight: 26.4 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø47-55 mm, thread M60 see photos -Grindstone: 400 x 40 mm, unfortunately without type designation -Transport dimensions: Ø 400 x 85 mm -Weight: 31.1 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø 62-69 mm / Left thread. -Grinding wheel: Ø 450 x 40 mm -Transport dimensions: Ø 450 x 140 mm -Total weight: 30 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone, 2 pieces -Mounting: Hole shaft cone Ø 50-60 mm -Grinding wheel: Ø 225 x 40 mm -Shipping/Price: complete -Dimensions each: Ø 225 x 90 mm -Weight: 10.4 kg/piece

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø 32-35 mm -Grinding wheel: Ø 210 x 40 mm -Transport dimensions: Ø 210 x 70 mm -Total weight: 4.3 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone, 2 pieces -Mounting: Hole shaft cone Ø 44-55 mm -Grinding wheel: Ø 270 mm, see photos -Shipping/Price: complete -Dimensions each: Ø 270 x 80 mm -Weight: 9.7 kg/piece

RAFAMET KCI 320/400N CNC vertical turret lathe manufactured in 2011 in Poland, can perform complex production programmes on large-size workpieces, thanks to one turning head and three milling heads set at different angles. The machine, with its compact frame structure made of high-quality grey cast iron, is distinguished by its high geometric stability, high rigidity and excellent vibration damping. The CNC vertical turret lathe KCI 320/400N performs precision turning, milling, drilling and boring of cylindrical, conical and curved surfaces with the aid of the applied heads. One of them is a special milling head (offset), used to perform drilling and milling operations with the position of the tool axis offset from the spindle axis in a direction parallel to the slide travel plane. On the other hand, the turning head allows to mount CAPTO turning tools in horizontal and vertical socke ...

Measuring machine, manual Erichsen cupping testing machine, cupping testing machine, sheet metal testing machine -Manufacturer: Klingenthal -Type: 05 -Sheet metal testing machine: Erichsen cupping, up to 2.0 mm -Accessories: see photos -Dimensions: 460/360/H335 mm -Weight: 20.5 kg

Transport trolleys, platform trolleys, transport trolleys, table trolleys, assembly trolleys -Transport trolley: Table trolley with 2 shelves, solid design -Load capacity: kg -Edition: Screen printing plates -Chassis: 4 swivel castors with brake -Dimensions: 1600/745/H1155 mm -Weight: 140 kg

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist, spur gear hoist -Manufacturer: Yale, chain hoist spur gear hoist type VS -Load capacity: 250 kg -Chain length: 3 m -Quantity: 1 piece -Transport dimensions: 350/180/H120 mm -Weight: 4.9 kg

KG 50 Year of construction 2023 Condition new from stock Description cable shredder,cable granulator Technical specifications Shredder power 380 V 4 KW Total power 5.18kW Range 3 - 30mm Weight 515KG Can be inspected in Hungary 8000. Available immediately from stock.

Kaeser SK26 Air compressor Serial: 2610494 Air compressor, 15Kw, 7.5Bar, rate motor speed 3000/min, 3Ph

Pull-wire emergency switch, emergency stop switch, pull-wire emergency switch -Manufacturer: Kiepe, pull-rope emergency switch -Type: SEB 00? see photos -Dimensions: 240/130/H150 mm -Weight: 5.3 kg

fixed center, fixed punch center, fixed Morse taper, fixed centering center, centering centers -Fixed centering tip: 3 pieces -Mounting: Met. cone 80 mm see photos -Shipping/Price: complete -Transport dimensions: 400/250/H80 mm -Total weight: 33.5 kg

STOKKERMILL K750 cable granulator-separator machine on order Manufacturer: STOKKERMILL (Made in Italy) Size: 120x120x180 cm Weight: 750 Kg Power: 7,5 Kw Capacity in input: 90-110 kg/h Table dimensions: 250x800mm Range of diameters: 1 a 35 mm Description Wire shredder for electric cables e-scrap K750 – A concentrate of techncology. Dry densimetric table cable shredder for the recycling of copper electrical wires. Wire shredder for electric cables K750 is the last model of the manufacturer Stokkermill Recycling Machinery in the segment of small solutions for the recycling of electrical cables and wires. Thanks to the accurate engineering research Stokkermill is able to offer a "small but great" machine at an affordable purchasing price with the lowest maintenance cost. Both the sizes of the mill, with 3 rotating and 2 stationary blades, and the dry densimetric t ...

Electric motor, three-phase motor -Manufacturer: VEM, electric motor type KPR 63 G 6 -Power: 0.25 kW -Speed: 900 rpm -Shaft: Ø 14 x 30 mm -Design: B3 -Protection class: IP 54 -Dimensions: 210/122/H1700 mm -Weight: 7.8 kg

Kenplaat mixing tank Stainless 1500l mixing tank, top mounted motor, level detection, side bottom discharge

Kronen KUJ Dicer Stainless machine, can be used for dicing, slicing and strip cutting, V cuts veg from 2 to 12mm and dices from 3mm to 20mm, up to 3000Kg per hour depending on product, with manual, mobile, 3Ph

amount: 1 STK height: 450 mm external diameter: 340 mm Filter cartridge/3-5µm 340 x 450 mm - H 34 2240/40 KIT MANN FILTER Oil filter element Mann filter element for oil of the highest quality for wire erosion, die sinking and spark erosion drilling. The Mann + Hummel H 34 2240/40 KIT oil filter element reliably removes dirt and solid particles such as dust, metal abrasion, oil, carbon, soot, etc. It offers protection and is used for the filtration of engine, hydraulic and gear oil. Technical data Height: 450 mm Outer diameter: 340 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Image processing control unit, camera control -Manufacturer: Vision Device, camera controller for 2 cameras -Type: unfortunately no further type designation -Individual components/connectors: see photos -Dimensions: 200/145/H110 mm -Weight: 1.4 kg

Kolbus CASERMAKER DA 232 Year: 2004 Serial Nr.: 236 Transport feed Hopper feed of pre-cut boards Hot melt glue Copilot system with touchscreen Auto splice and waste cutter Automatic lubrication Max size 405 x cover 560, 110 x 155 mm • Max cover thickness 4 mm

More details upon request

Fiber optic measuring amplifier, fiber optic sensor, fiber optic amplifier -Manufacturer: Keyence, fiber optic amplifier with accessories -Type: FS-N41C -Voltage: 10...30 V DC -Transport dimensions: 120/120/H30 mm -Weight: 0.1 kg

Welding iron -Welding bar: for welding plastics, from mask manufacturing machine -Thermal panels/air nozzles: 2 each -Dimensions: see photos -Number: 3x hangers available Price: per piece -Dimensions: 240/100/H55 mm -Weight: 0.7 kg/pc.

Camera-based code readers, uEye camera, industrial camera, high-performance camera -Manufacturer: Keyence, Industrial camera, 16x speed, 2-megapixel camera (B/W) -Type: CA-H200MX -Dimensions: 115/70/H60 mm -Weight: 0.4 kg

The KEBA keypad HT511-221/ENGEL/50200/19 - 2-stage enabling button - comes from an ENGEL ERC 34-1-E Handling from 2007. The serial number is 50200-01062. The device is ready for connection with a coupling plug.

The KEBA keypad HT501-221/ENGEL/24244/18 - 2-stage enabling button - comes from an ENGEL ERC 24 Handling. The serial number is P21305-02216. The device is ready for connection with coupling plug incl. soft case.

Camera-based code readers, uEye camera, industrial camera, high-performance camera -Manufacturer: Keyence, Industrial camera, 16x speed, 5-megapixel camera (B/W) -Type: CA-H500MX -Dimensions: 115/70/H60 mm -Weight: 0.4 kg

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable -Type: DST 3 -Connector: 6-core cable -Transport dimensions: 480/300/H130 mm -Weight: 2.1 kg

The KEBA keypad HT501-221/ENGEL/24244/18 - 2-stage approval button - comes from an ENGEL ERC 24 Handling. The serial number is P21305-02213. The device is ready for connection with coupling plug incl. soft case.

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable -Type: DST 3 -Connector: 6-core cable -Transport dimensions: 520/240/H140 mm -Weight: 2.1 kg

SEW Eurodrive KHF67/R DV132S4/BMG/TH/VR/AV1H Geared Motor 230/400 V 1430/135 r/min 390 Nm Weight: 90.5 kg More centrifugal pumps new and used - you can find them in our shop! International shipping costs on request!

Conveyor Belt / Conveyor different lengths, different widths, Condition: as it is or made to order