70 k used for sale

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Number: 2x hose package available -Price: per piece -Length: 6.3 m -Weight: 5.4 kg

-Lifting tipper König -for König and Diosna Kessel -Weight 950 kg -Height: 235cm

Overview of equipment: - Workpiece support scissor design with roller support, 1000 mm extendable - Infeed ruler automatically adjustable - Fixed stop side left - Inlet interlock pneumatically controlled - Upper pressure via driven composite V-belt - Height adjustment electric - Workpiece transport device via transport chain with rubber support - Release agent spray unit top/bottom - Joint milling unit 2 x 3 kW - Gluing part A20 with 2 rollers, consisting of workpiece preheating, Quickmelt application unit with quick clamping system, 2-roll magazine, pressure zone C (auto-adjustable, with 1 pre-press roll and 6 repress rollers) - Cross-cut unit HL84 0.8 kW, with autom. Adjustment chamfer/straight as well as pneum. Adjustment flush/protrusion caps - Pre-milling unit 1.5 kW, pneum. Adjustment of bündi/protrusion milling machines - Mould milling unit FK11 with autom. Adjustme ...

Hydraulic pump, oil pump, gear pump, vane pump, hydraulic power unit -Manufacturer: VEM, hydraulic unit from Dorstener APE80-3050 press brake -Drive: VEB Type KMER 132 AC P 7.5 kW 1435 rpm -Flow rate: l/min -Operating pressure: bar -Dimensions: 720/340/H335 mm -Weight: 87 kg

Extruder 65/22D. Battery head 3.7 ltr. Locking plates 600 x 600 mm. Clamping force 630 kN. New Beckhoff control system installed in 2019. Available immediately from stock

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Basis: Kellenberger Kel-Varia UR175-1000 Schleifkopf UR mit T1-T2-T3 Grundausstattung: -T1 500mm Schleifscheibendurchmesser -T2 400mm Schleifscheibendurchmesser -B-Achse hochauflösend -Marposs Messeinrichtung zur Werkzeugvermessung -Werkzeugvermessung -Aktive Längspositionierung -GAP an T1 berührungslos -Reitstock mit Handrückzug -Werkstückspindelstock MK5 mit Kurzkegelaufmahme DIN 55026 -Innenschleifeinrichtung riemengetrieben Optionen gegen Aufpreis: - neuer Werkstückspinde ...

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN32 -Width: 180 mm -Nominal pressure: PN10 -Dimensions: 180/140/H210 mm -Weight: 6.1 kg

Vacuum pump, rotary vane pump -Drive: 1.6 kW -Flow rate: m³/h -Max. pressure: mbar -Speed: 2850 rpm -Inlet: Ø 43 mm -Outlet: Ø 43 mm -Price: per piece -Quantity: 1 available -Dimensions: 360/220/H215 mm -Weight: 20 kg

grinding diameter: 350 mm grinding length: 600 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø : ±10 ° longitudinal feed of the table: 1100 mm table speeds: 0,02-6 m/min : 130 kg cross travel: max. 270 mm : 130 inkl. Spannung kg : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,05 t dimensions of the machine ca.: 4 x 2 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service  ...

1 x Steam turbine generator 3817 KW KKK Siemens CFR5 G6b 5,000 KWe x 1,500 rpm 50 Hz 6,300 V for sale in operational condition Turbine Manufacturer KKK Siemens Model CFR5 G6b Steam pressure fresh [bar] 64 Dampfdr. Ed. [bar] 8.5 Generator Manufacturer INDAR Model BZK-710-S/A-4 P Generator [KW] 5.000 Turn around. [per min] 1,500 Frequency [per sec] 50 Voltage [V] 6,300 Current [A] 458 Scope of delivery: The system has been completely dismantled and is complete including the control system. Technical documentation: available Spare parts / tools: not available The plant was dismantled in working order. Last major overhaul: unknown Sales are "as is" or after prior inspection by a company engaged by us on request

Three-phase motor, electric motor -Power: 5.5/8/22 kW -Speed: 740/975/1475 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 750/510/H390 mm -Weight: 275 kg

Power cables, solar cables, fiber optic cables, fiber optic cables, data cables, LAN cables -Manufacturer: Lapp Kabel, Unitronic data cable -Type: Unitronic LiYCY 8x2x0.5 ROHS -Length: 75 m -Price: complete -Dimensions roll: Ø 700 x 490 mm -Weight: 36 kg

Manufacturer: Karl Klink Model: RKW 25-3800-520 Weight: 50t Year of construction: 1990 Machine no.: 3048 & 3047 General / technical data: Chain broaching machine for continuous outdoor clearing Pulling force: 25.000kg Cutting speed: 7.2 / 8.1 / 9.6m/min Maximum tool length: 3520mm Passage width: 520mm Tool carrier clamping surface: 3520 x 460 mm Dimensions: 12.300 x 6.400 x 4650mm Power Supply: 380V 50Hz/110kW Accessories/ Special equipment: - 6 tool carriers for tool change - Machine documentation Remark / General The machines are in good condition. The machines are dismantled with us in the Bearing. The total volume of the plant comprises several trucks (approx. 70 tons per machine). The machines have produced connecting rods for passenger car diesel engines. Chain scrapers are designed for use in mass production. The continuous ( ...

Converters for bottle vibrators, vibrating bottles, internal vibrators, concrete vibrators -Frequency converter: dimensions 550/480/H260 mm -Vibrating bottle: length 450 mm -Hose length: 10 m -Weight: 98 kg

Kroll heating mobile as hall heating, years of construction 194/95, see picture type plate

Fieldbus, Profibus, PLC control, automation technology, controllers and regulators, bus coupler, logic bus terminal -Manufacturer: Beckhoff, TwinSAFE Logic bus terminal -Type: KL 6904 -Nominal voltage: 24 V DC -Dimensions: 24/68/H100 mm -Weight: 0.2 kg

Electric motor, three-phase motor -Manufacturer: VEM, electric motor type KMO 56 K 4 -Power: 0.12 kW -Speed: 1360 rpm -Shaft: Ø 11 x 20 mm -Construction: B3 -Dimensions: 153/110/H145 mm -Weight: 4 kg

Cold room with two doors for blast freezer and freezer. Panel thickness 100mm Mass: Length 600 cm. Width 300 cm. Height 260 cm. Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 NT Year of construction 2003 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Side sweat monitoring - Foil holding plate Pwq9ya - Control: Siemens S7-300 - Operating terminal with Sütron BT20 - Welding punch with replaceable welding strip - Side welding wheel-knife combination, can also be exchanged for a knife system - Processable films PE and PO - Year of construction 2003 - Shrink tunnel Kallfass Standard - Gripper section with inline belt - Curved band can be ...

Lever measuring device, dial gauge, measuring probe, measuring probe, centering device, centrizer, 3D probe, probe insert -Measuring range: 1mm -Reading: 0.001 mm -Scale: 0-100-0 -Tolerance marks: adjustable -Price: per piece -Number: 4 pieces -Dimensions: 135/65/30 mm -Weight: 0.2 kg

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 Year 2006 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Control: Siemens S7-300 - Operating terminal with Siemens touch panel - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel knife system - Processable films PE and PO - Year of construction 2006 - Kallfass Compact 450 SO shrink tunnel - Gripper section with inline belt - Book magazine on gripper section - Ionization for blocking loose leaves - Cur ...

Inv. Num. : 6295 Type: HX-360-W3/OT/LT+VT1/800x1150x650 Producer: KRAINTEK Generated: 2020 Parameters: Basket size: 470x850x310 mm Basket capacity: 70 kg Height: 3450 mm Depth: 8277 mm Length: 11640 mm Weight: 15000 kg

Electric motor, three-phase motor -Manufacturer: VEM, electric motor type KRA 132 3/4 -Power: 7.5 kW -Speed: 1450 rpm -Shaft: Ø 32 x 80 mm -Construction: B3 -Protection class: IP44 -Dimensions: 525/340/H265 mm -Weight: 80 kg

Length measuring system L-40NC suitable for Kaltenbach circular saw KKS 450 (please request KKS 450 separately) Directly from the customer used from CH-Oberrohrdorf available.

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Kessler, DC motor -Type: GM50/60/1/U -Max. Speed: 3200 rpm -Power: 16 kW -Voltage: see photo nameplate -Shaft: Ø 55 x 100 mm -Construction: B3 -Dimensions: 1010/570/H520 mm -Weight: 610 kg

Level sensor, Sensor, probe, immersion probe, float switch, magnetic switch, magnetic float switch -Manufacturer: KSR Kuebler, Magnetic Float Switch -Type: ARV1.5 -VSS/R-L1.650/12-V44A-adjustable -Immersion depth: approx. 1650 mm -Dimensions: 1785/75/90 mm -Weight: 1.4 kg

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellows coupling -Manufacturer: KTR-Rotex, claw coupling type GS -Shaft: Ø 28/Ø 38 mm -Price: per piece -Number: 13 piece -Dimension: Ø 65 x 88 mm -Weight: 0.6 kg/piece

CENTRO DI LAVORO KIA V25- ANNO 2005, CNC FANUC 0i-MB PALLET:2 UTENSILI SORAGE: 16 STAZIONI MANDRINO BT30 Giri/min: 10000 TABELLA:500X300X500 FULL DI MANUALI E ATTREZZATURE. MACCHINA MOLTO VELOCE e veloce da equipaggiare. COLLEGATA ALL'ALIMENTAZIONE IN PRODUZIONE.

Throughput depends on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 40 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 150 Length: 150 Height: 180

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellows coupling -Manufacturer: KTR-Rotex, elastic claw coupling type GS -Shaft: Ø 28/28 mm -Price: per piece -Number: 2 piece -Dimension: Ø 65 x 88 mm -Weight: 0.5 kg/piece

Set-top model Complete stainless steel body and working table Adjustable blade tensioner Caver safety switch Cover safety saw Length is adjustable thanks to the standard joinery System cutting thickness property Maintenance-free compact design Machine dimensions in cm: Length: 100 Width: 90 Height: 190 Electric power: 2.5kW

Pressure press Korrex Nuremberg Korrex Nuremberg , completely overhauled with 3 sets of paint rollers. Electric paint trituration , Washing doctor blade .

Electric motor, three-phase motor -Manufacturer: Katt, electric motor type FK 4 a -Power: 5 kW -Speed: 2920 rpm -Shaft: Ø 38 x 70 mm -Protection class: IP 54 -Construction: B14 -Dimensions: 410/290 / H210 mm -Weight: 44 kg

Dial indicator, dial gauge, probe, probe, centering device, centrizer, 3D probe, probe -Measuring range: 0-3 mm -Reading: 0.01 mm -Scale: 0-50-0 -Tolerance marks: adjustable -dimensions: 95/55/H25 mm -Weight: 0.1 kg

Veneer assembly machine model FWL 1200, Joining, gluing, thread and white gluing

fuel pump, supercharger carburettor -Kyosan Denki: Type 10-2 -Price per piece -Quantity: 2 pieces -Dimensions: 200/100/H170 mm -Weight: 0.7kg/pcs

Level limit switch, level measuring device, sensor, switch, level transmitter -Pepperl+Fuchs Part No.: 103375 -Dimensions: 130/120/H30 mm -Weight: 0.2 kg

Brake shoe set, wheel brake, brake set -Manufacturer: Knott, wheel brake type 16-1369 -permitted Weight: 450kg - Bolt circle: Ø 100 mm -Price per piece - Quantity: 17 pieces -Dimension: Ø 185 x 195 mm -Weight: 9.1kg/pcs

Brake shoe set, wheel brake, brake set -Manufacturer: Knott, wheel brake type 16-1369/1 -permitted Weight: 450kg - Bolt circle: Ø 112 mm -Price per piece - Quantity: 49 pieces -Dimension: Ø 185 x 195 mm -Weight: 9.1kg/pcs

Used head machine KÖNIG, Type: Mini Rex Futura -Overhauled- - Head machine / dough divider: KÖNIG Mini Rex Futura TR/G-FS - Warp knitting roller: SKG54 and AKG70 (20 - 135g) - 2 rows - new tapes - new Teflon - Wear parts renewed (completion 15 January 2023) - 6 months warranty - Condition: Very good, ready for immediate use Suitable for wheat and rye doughs (up to 40% rye content). Visits and test runs are possible by arrangement.

Connection line, connection cable, cable line, socket cable, socket line -Manufacturer: Festo, socket cable unused Ovp -Type: KMYZ-9-24-2,5-LED-PUR-B -Mat no.: 193786 -Number: 4x available -Price: per package -Dimension package: 200/180/H10 mm -Weight: 0.1 kg/piece

Veneer assembly machine model FW 1100,

KORRADI UW 10 with Heidenhain equipment, details see pictures, immediately available

turning diameter: 555 mm turning length: 1500 mm turning diameter over slide: 290 mm 3-jaw-chuck diameter: 315 mm make: Röhn control: Monforts MTCK quick change tool holder: Multifix C steady: turning speeds: 2-2800 U/min transmission ratio: 3 face slide travel: 235 mm spindle passage: 70 mm tailstock quill taper MT: 5 total power requirement: kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2,9x1,6x1,8 m About usmore than 400 machines in the warehouse over 12000 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4 column truck / bus lift WITH INTEGRATED LIGHTS Lift is already dismantled, ready to load on truck. We can organize it transport inside EU. We can organize it 4-column: yes width between the columns 335cm length lanes 800cm

Manual slicer with integrated packaging module KUCHLER S.A.M. 300 psh + foil machine + packer Specifications: Type slicer: SAM 300 Psh T Type film dispenser: SAM IL - 4 - 220 Airless Type Packer: SAM T 26 230 volts / 50 Hz / 3.24 A Year of construction: 2010/2011 Film size: 21 x 26 & 21 x 22 cm several layers on top of each other can be welded Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 300 mm Stainless steel knife, Teflon coated Luminous flux Function tested, machine immediately ready for use! Condition, see original pictures! If you have any questions, email or call.

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Kromschroder, gas pressure switch -Type: DG500U-6T -Control range: 100-500 mbar -Pmax.: 600 mbar -Dimensions: 75/75/70 mm -Weight: 0.3 kg

Transformer, transformer, converter, three-phase autotransformer, converter, voltage transducer, current converter -Manufacturer: Ritz, voltage converter -Type: KSER 104/1 -Price: per piece -Number: 2 piece -Dimension: 75/105/H140 mm -Weight: 2.5 kg/piece

Polycarbonate, plexiglass, acrylic glass, acrylic glass -Plastic panels: transparent -the panels are covered on both sides with protective film -the panels can be cut with guillotine shears -the panels are flexible but not suitable for bending -Length: 3000 mm -Width: 2000 mm -Thickness: 2 mm -partly slight damage to the edges -Number: 20x pieces available -Price: per piece -Weight: 14.5 kg/piece

Dimensions (LxWxH) approx. 2,600 x 1,000 x 1,600 mm Weight approx. 1,300 kg machine number 833, Digital display chalice PICO Version A 23, Clamping length approx. 2000 mm, clear width in the passage (portal) 740 x 320 mm