70 k used for sale

bore capacity in steel (diameter): 25 mm throat: 240 mm bore stroke: 110 mm turning speeds: 125 - 2850 U/min : 310 x 320 mm distance drilling head - clamping area: max. 650 mm total power requirement: 0,75 / 400 kW / Volt weight of the machine ca.: 0,175 t dimensions: 0,95x0,8x1,75 inkl. Tisch m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 3754; Engine: Caterpillar C13; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : Caterpillar PL444 cellular radio system; Water Tank Volume [l]: 721

; Gross weight [kg]: 2924; Engine: Caterpillar C13; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 721

; Gross weight [kg]: 3886; Engine: Caterpillar C13; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 721

Cooling capacity: 3000 kcal/h coolant: dest. Wasser tank: 7,7 l volume capacity: 3 l/min operating pressure: 3,25 bar connected load: 0,5 kVA connected load frequency: 380 V • water circulation for destilled water or for water with anti-freeze and anti-corrosion protection, new-valued, was only used for testing purposes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Power [PS]: 71; Gross weight [kg]: 1250; Engine: Caterpillar C3.3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 219

; Power [PS]: 71; Gross weight [kg]: 992; Engine: Caterpillar C3.3; Accessories: Tanker, Battery, Control Panel, Stahldach, Caterpillar DE88GC Generator Set specifically designed for stand-by duty.; Water Tank Volume [l]: 103

; Gross weight [kg]: 1020; Engine: Kubota V2203M; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Sockets 400V: 1x63A, 1x32A, 2x 16A, Sockets 230V: 3x 16A CEE, 1x 16A Schuko; Water Tank Volume [l]: 150

thickness of jaw: 200 mm clamping range: 210 mm clamping height: 55 mm weight: 34,5 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 130 mm turning length: 700 mm turning speeds: 115 - 1620 U/min centre height: 125 mm spindle bore: 27 mm tailstock quill taper MT: 2 tailstock quill stroke: 40 mm metric threading: 0,2 - 3,5 mm thread - inch: 8 - 56 inch. thread - module: 0,2 - 12,5 mm swival range +/-: Oberschlitten 45 ° connected load frequency: 400 V total power requirement: 0,75 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,41 x 0,61 x 0,41 m Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways by adjustable strips - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled. The data for ...

bore capacity in steel (diameter): 40 mm throat: 370 mm bore stroke: 200 mm spindle taper MT: 4 MK table:: 580 x 460 mm column diameter: 160 mm turning speeds: 75 - 2020 U/min feeds: 0,1 - 0,2 - 0,3 - 0,4 mm/U total power requirement: 1,5 kW weight of the machine ca.: 700 kg. range L-W-H: 1,1 x 0,6 x 2,35 mm • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Power [PS]: 87; Gross weight [kg]: 1500; Engine: Iveco FPT F36TE1PV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets:, CEE 32A 400V 5P, CEE 16A 230V 3P, , Prices when changing alternator options may differ from the price online.; Water Tank Volume [l]: 160

; Gross weight [kg]: 3500; Engine: N67TM7; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy, - Stage V version available: Deutz TCD7.8 - Genset 220 kVA St5 SuperSilent- DPX-21006 + €44.000, -; Water Tank Volume [l]: 500

; Gross weight [kg]: 2420; Engine: NEF45TM2A; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy, -Deutz TCD4.1 - Genset 110 kVA St5 SuperSilent- DPX-21004 + €23.500, -; Water Tank Volume [l]: 360

-Noise rating: 55 dB at 7m; Gross weight [kg]: 3400; Engine: NEF67TM3A; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 500

turning diameter over bed: 250 mm turning diameter over slide rest: 130 mm turning length: 700 mm turning speeds: 115 - 1620 U/min centre height: 125 mm spindle bore: 27 mm tailstock quill taper MT: 2 tailstock quill stroke: 40 mm metric threading: 0,2 - 3,5 mm thread - inch: 8 - 56 inch. thread - module: 0,2 - 12,5 mm swival range +/-: Oberschlitten 45 ° connected load frequency: 400 V total power requirement: 0,75 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,41 x 0,61 x 0,41 m Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways by adjustable strips - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled. The data for ...

Thickness: 16 x 16 mm number: 4 Stähle weight: 3 kg dimensions: 300m x 200 x 50 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mm y-travel: 300 mm z-travel: 400 mm table-size: 1320 x 360 mm spindle taper ISO: 40 spindle turning speed range: 58 - 1800 U/min total power requirement: 4 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,1 x 2,1 x 1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

-Noise rating: 55 dB at 7m; Gross weight [kg]: 3400; Engine: NEF67TM3A; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 500

EU STAGE 5 Compliant, 50/60 Hz switchable frequency via terminal link, 550 kVA Prime power, Spark arresting silencer; Gross weight [kg]: 6740; Engine: Perkins 2806J-E18TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets CEE-Form:, 2x 16A (1ph+N+E), 2x 32A (3ph+N+E), 1x 63A (3ph+N+E), 1x 125A (3ph+N+E); Water Tank Volume [l]: 1125

; Gross weight [kg]: 3651; Engine: Perkins 1206J-E70TTAG; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets: 125A, 63A, 32A (2x), 16A (2x single phase), Including: Coolant heater and battery charger; Water Tank Volume [l]: 822

; Gross weight [kg]: 735; Engine: Perkins 404J-22G; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 56

faceplate diameter: 3200 mm swing diameter: 3500 mm turning height: 2200 mm Control: Typ 840 D sl total power requirement: 51 kW weight of the machine ca.: 86 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 4200 kN injection volume: 572 - 1716 cm³ screw diameter: 90 mm platen size: 1040 x 1040 mm closing stroke: 620 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 250 mm roll length: 500 mm rolls drilled: Kernbohrung nip adjustment: mechanisch drive power:: kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 4103; Engine: Perkins 1706J-E93TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets: 125A, 63A, 32A (2x), 16A (2x single phase), Including: Coolant heater and battery charger; Water Tank Volume [l]: 667

; Gross weight [kg]: 2527; Engine: Perkins 1204J-E44TTAG2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 518

; Gross weight [kg]: 18290; Engine: Caterpillar 3516B HD; Accessories: Control Panel, Caterpillar 3516B HD Genset from the official CAT Rebuild Program., Engine is completely rebuild by CAT or even unused/surplus., All other components are usually new., Comes with the standard CAT factory warranty.

x-travel: 4700 mm y-travel: 1000 mm z-travel: 1000 mm control: HEIDENHAIN TNC355 table-size: 5000x1000 mm T-slots: 7x mm turning speed range: 2800 U/min feed: 6-5000 mm/min rapid traverse: 15000 mm/min spindle motor: 30,00 kW spindle taper: SK 50 Table load: 10.000 kg Main drive: 40 PS weight of the machine ca.: 27,00 t dimensions of the machine ca.: m With HEIDENHAIN TNC 355 control. Machine can be inspected under power. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3100 mm swing diameter: 3600 mm turning height: 3600 mm control: Fagor 8035 table load: 35 t turning speeds: 0,32 - 40 U/min max. ram stroke: 3000 mm table load: 35 t turning speeds: 0,32-40 U/min total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Power [PS]: 1360; Gross weight [kg]: 6985; Engine: Caterpillar C32; Accessories: Control Panel, Caterpillar C32 Genset from the official CAT Rebuild Programm., Engine is completely rebuild by CAT or even unused/surplus., All other components are usually new., Comes with the standard CAT factory warranty.

; Gross weight [kg]: 10083; Engine: Caterpillar C32; Accessories: Tanker, Battery, Control Panel, Stahldach, Incl. Coolant Heater and Battery Charger; Water Tank Volume [l]: 1000

; Gross weight [kg]: 1615; Engine: Caterpillar C4.4; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 250

; Gross weight [kg]: 1213; Engine: Caterpillar C4.4; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 166

max. wheel diameter: 275 mm gear width: 55 mm max. module: 6 min. module: 1,5 control: Sinumerik 840C tooth width: 5,5 mm spiral angle: 0/60 ° max. number of teeth: 120 min. number of teeth: 5 transmission ratio max.: 1:10 transmission ratio min.: 1:1 spindle speeds: max. 110 mm blade head turning speeds: 20-110 1/min total power requirement: 100 kW weight of the machine ca.: 16700 kg dimensions of the machine ca.: 5200x2300x2400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: unbkt l coolant: unbkt pressure: unbkt t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 5255; Engine: Cummins QSZ13-G10; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 800

; Gross weight [kg]: 1500; Engine: Deutz TD2.2L3-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 150

; Gross weight [kg]: 1600; Engine: BF4M 2011; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 175

; Gross weight [kg]: 1250; Engine: F3M 2011; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 125

number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of controlled axis: unkt. workpiece weight: unbkt kg throat: unbkt. mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

external diameter: 762 mm internal diameter: 304,8 mm width: 36 - 42 - 64 mm Unused grinding wheels Ø 762x304,8 mm! 2x36 mm width Norton 1x64 mm width Norton 1x42 mm width Krebs 4x64 mm width Krebs The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 1550; Engine: Deutz F4M 2011; Accessories: Tanker, Battery, Control Panel, Stahldach, Straßenzulassung, - Super Silent Canopy, - Stage V version available: DPX-21001 + €5.500; Water Tank Volume [l]: 175

dimensions: 670 x 430 x 870 mm : 670 x 430 mm semi-autom. working: SEMI-AUTOMATIC band length preselection via POTI Band voltage manually via coupling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mm cutting range round: 115 mm cutting range square: 105 mm cutting length min.: 730 mm cutting range flat: 70 x 240 mm cutting lenght max.: 4000 mm saw blade turning speeds: 1250 / 2500 U/min table rotating: 180 ° stroke: 120 mm feed stepless: 0 - 500 mm/min coolant: capacity 45 degrees: square: 95 mm capacity 45 degrees: flat: 50 x 200 mm cutting speed: 1250 / 2500 m/min weight of the machine ca.: 1,1 t dimensions of the machine ca.: 5,00 x 1,30 x 2,00 m - Fabr. - No.: 28232 und 28233 - pneunatic clamping head - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3.400 mm y-travel: 1.250 mm z-travel: 2.000 mm Control: TNC-430PA table-size: 4.700 X 1.200 mm V- travel: 500 tool taper: ISO 50 milling head -swivable: 0.001º/0.001º Grad main drive: 37 kW Chip coveyor: inkl handwheel: HR-410 Tools changer: 60 pos. milling head: Automatic Head 45º weight of the machine ca.: 35 t - Automatic Head 45º INCLUDED - Automatic Head 45º 0.001º/0.001º - Head 45º Max. Speed 3.000 rpm - 45º Head Taper ISO-50 - Twist Head Contiuous INCLUDED - Twist Head Max Speed 3.000 rpm - Twist Head Taper ISO-50 - Ram with Quill - Quill Diameter 150 mm. - Quill Taper ISO-50 - Pick up station AITEK for 45º and Twist Heads - Rotary Table ZEATZ Ø 1200 INCLUDED - RENISHAW MP 16+SP2/1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 1600; Engine: Deutz TCD2.9L4-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Sockets: (400V) 125A, 63A, 32A, 16A, Sockets: (230V) 4x 16A; Water Tank Volume [l]: 250

; Gross weight [kg]: 8380; Engine: KTA38-G14; Accessories: Battery, Control Panel, Including : coolant heater and battery charger