126,706 used machines on RESALE, but how to find them? Machine Search
Ref.Nr 00682 Designation of the machine grinding machine / calibration machine Manufacturer Ferrari & Cigarini s.r.i. Model Calibratrice Built in 2012 Current Use To Grind Flow Surface or reduce the height of the workpiece 67.9 kW 400 V- 50 Hz 3 + 6 Bar 4700 kg Delivery date by appointment
Description suction quantity 132 [m3/h] max suction pressure ± 100 [mbar rel.] Motor 3.3 KW
Komori GL 40 L 16,500 sheets per hour Plate format: 800 x 1030 mm Maximum paper size: 720 x 1030 mm Blanket size: 920 x 1040 mm Maximum print format: 710 x 1020 mm Stacking height feeder: 1150 mm Paper thickness (skeleton): 0.06–1.0 mm IR dryer Stacking height delivery: 1150 mm KID: Color zone pre-profiling PCC: Prepress interface PDC-SG: Spectral Density Control Display: Extended with infrared dryer Automation: Semi-automatic plate changing (SAPC) Cleaning by spray jet with solvent under pressure: Paint application roller Dampening roller Inspection of the vibrating rollers Continuous feeder Communication via intercom Located: Europe Eastern
Description Rotary vane pressure vacuum pump Rietschle KTA 80 .1 YOC 2006 max. delivery quantity 80 [m3/h] max. pressure ±600 [mbar rel.]
; Gross weight [kg]: 1775; Engine: 4TNV98CT-IYE; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy; Water Tank Volume [l]: 210
; Gross weight [kg]: 1395; Engine: 4TNV88-BIB; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Housing; Water Tank Volume [l]: 175
; Gross weight [kg]: 4520; Engine: Volvo TWD1645GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 897
; Gross weight [kg]: 13000; Engine: DC16 320A 02/63; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy; Water Tank Volume [l]: 2500
; Gross weight [kg]: 13000; Engine: DC13 320A 02/62; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super silent Canopy; Water Tank Volume [l]: 2500
Description Rotary vane vacuum pump Becker KVT 3.140 from year of construction 2011, completely revised June-2014, since then stored – robust and completely oil-free vacuum pump – with simple construction, direct drive and only one shaft – guarantees longevity and low maintenance and operating costs – integrated intake filters and regulating valves – problem-free installation of accessories – optional corrosion protection – low noise emission – low heat radiation Technical data – Frequency: 50/60 Hz – maximum pumping speed: 129/154 m³/h – max. vacuum: 100/200 mbar abs. – motor power: 3.3 /4.40 kW
; Gross weight [kg]: 5500; Engine: DC 09 320 02/61; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy; Water Tank Volume [l]: 1200
Description Hand-held battery-operated scrubbing machine with roller technology used for basic cleaning, wet cleaning, maintenance cleaning and polishing of flat floors up to 1900m²/h." Power requirement 220Volt 50Hz
Weibert WJ-K315 Format circular saw Format sliding table: 2550mm Engine power: 4 KW (5.5 hp), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm swivel: 90°-45° WJ-800100
; Gross weight [kg]: 4950; Engine: Cummins QSZ13-G3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant Heater and Battery Charger; Water Tank Volume [l]: 775
Brand Engine CUMMINS Model KTA 38 M2 Power 1300 hp RPM 1800 rpm Serial Number 33167700 General condition Low hours excellent condition Options Flywheel housing SAE 0 Flywheel Governor Exhaust system Turbo Cooling system Mechanical Turbocharged and aftercooled Sea water pump Starter Panel Water Pump Weight (kg) 4300 Dimensions (cm) 215 x 146 x 208
Processing plant Manufacturer: Koruma Type: Disho A140/200 No.: 4,209 Built: 1988 with user manual no vacuum, no double jacket with control cabinet LWH: 1400 x 850 x 1450 mm
KIMLA BPF 2131 CNC router was built in 2014 in Poland by POLCOM Przemysław Kimla. The machine, dedicated to both small and medium-sized businesses, is the perfect choice for precision machining of a wide range of materials. All machining processes, i.e. milling, cutting and engraving, are performed on a large work table by means of a powerful, high-speed spindle. The offer also includes a set of tool holders. The KIMLA CNC milling machine weighs 3100 kg. Technical data of the KIMLA BPF 2131 milling machine - machined materials: mild metals, wood, wood-based materials, plastics, etc. - CNC controller - work table dimensions (L x W): 3100 x 2100 mm - air pressure: 8 bar - power: 14 kW - power supply: 400 V; 50 Hz - weight of the BPF 2131 machine: 3100 kg
Description: 5 new transformers Type : OIL transformer Execution : Hermetics Make : Schneider Built: 2016 Condition: New Rated power: 1360 KVA Medium voltage: 11 KV +- 2 x 3.5% Low Voltage: 380 V Solar Transformers Switching group: DYN 11 Frequency: 50 Hz Cooling type : ONAN Total weight: 4345 Kg Other sizes and voltages also available from 100 KVA to 3500 kva . Brp2ucps All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT . Nationwide delivery included. For further questions, contact i.m. Mon to Sat 8 a.m. to 10 p.m.
Freshly overhauled DC motor Baumüller/Krämer+Grebe Type: GNF 180 MN No.10404901 400V 173 kW 3100 rpm Excitation: 320V with speedometer
Key data: 1550 mm, 3 mm
Machine Type: Guillotine Shears Manufacturer: KRAMER Type: TM1a Year of Make: 1987 Condition: used Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference M-KRA-1025-1 DESCRIPTION We offer you a used guillotine shears from the manufacturer Kramer. Expected to be available from 10/07/2025 Cutting width max. 1550mm Cutting capacity max. 3.25mm Back gauge 550mm Weight 2065kg Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!
Emulsion fission system, oil-water separation system (for the de-oiling of condensation in compressors) The cost-effective and permanently reliable The solution to the problem is usually the oil/water Separation for dispersed condensates. that cleaned water complies with the legal Rules on channel discharge
; Gross weight [kg]: 4100; Engine: Volvo TAD1345GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 515
Engine serial nr.: NYJ00480, Generator set serial nr.: K7F00641, Generator serial nr.: 74B0080; Gross weight [kg]: 16080; Engine: Caterpillar 3516B; Accessories: Control Panel
Type Cutters Height 1900 Width 700 mm Length 1300 mm Weight 270 kg Voltage Electrical: 400V 50Hz 3N Installed Power 11 kw Main material Stainlees Steel Cutter Type Emulsifier Knife shaft revolutions 2900 rpm
used
Qty. 1 Second-hand complete 12-Hi reversing cold rolling mill incl. sand blast line Mfc.: Kobelco Type: 12-Hi reversing Built: 1986 Strip width: 900 – 1250 mm Thickness: Entry: 3.2 mm Exit: 0.4 mm Rolling speed: 120/300 m/min.
Mechanical shut-off valve KRAFT 100 mm diameter AluHand lever We have three pieces of this model in stock, along with many other pipe valves, inlet valves, flaps, pipe crossovers for a wide range of applications. We look forward to hearing from you!
Centrifugal pump Manufacturer: Hans Schuy GmbH Type: KRP50/832107/6286 Year of construction: 1988 Power: 3.8 kW LWH: 440 x 270 x 400 mm
; Gross weight [kg]: 2035; Engine: Hyundai P086TI-1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 185
Brüel & Kjær Vibration Testing System 4812 + 4801 Shaker Specifications – Exciter Head 4812 • Max. dynamic force: 445 N (100 lbf) with Body 4801 • Current consumption: 23 A RMS with cooling / 11.5 A without • Resonant frequency: 7.2 kHz • Travel: 12.7 mm continuous / 14 mm max • Acceleration limit: 981 m/s² • Bolt Torque Limit: 3.4 Nm • Dimensions: Ø 235 mm × 178 mm • Weight: 8 kg • Material: hard anodized aluminum Specifications – Exciter Body 4801 • Power supply: 380 V ±10% or 440 V ±10%, 3-phase, 50 Hz • Cooling: Air-cooled (integrated fan) • Installation height (without head): 370–405 mm • Additional height due to head: +50 to +130 mm • Weight: 75–80 kg Description & Use: Condition: Used (see pictures). Hint: For detailed technical data and processing instructions, we strongly recommend consulting the or ...
Centrifugal pump Manufacturer: Hans Schuy GmbH Type: KSP50/6399/772097 Year of construction: 1990 Power: 2.05 kW very good condition LWH: 460 x 240 x 400 mm
Centrifugal pump Manufacturer: VEB Kyffhäuserhütte Artern Type: KSP 65/180-1,3 Item #: 98605 Year of construction: 1987 Power: 3.8 kW standing on feet very good condition LWH: 560 x 250 x 450 mm
; Gross weight [kg]: 4600; Engine: Hyundai DP158LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 775
; Gross weight [kg]: 6185; Engine: Hyundai DP222LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1090
; Gross weight [kg]: 2364; Engine: Hyundai P086TI; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 224
Machine name: Injection moulding machine used Manufacturer: Ferromatik Milacron (Klöcker) Type: FX50 R 35 Year of Make: 1991 Operating hours: 2000 h Drive motor:15 kW Dimensions: L 4300 x W 1400 x H 2200 mm Curb weight: 3400 kg Tech. Documentation: Yes Remark: General data: Dry running rate: 40 min, Pump drive: 15 KW, Total connected load: 25.7, Oil tank capacity: 180 L Injection unit: Screw diameter: 35 mm, Injection pressure: 1730 bar, Stroke: 116 cm3, Screw stroke: 120 mm, Moulded part weight max.: 99 g, Injection flow max.: 505 g/s, Injection capacity calcane: 15 KW, Plasticising flow: 29 g/s, Screw length: 22 LID, Screw speed max.: 430 min, Screw torque max.: 360 Nm, Installed heating capacity: 10.7 kW, Number of heating zones: 5, Nozzle press force: 65 kN Clamping unit: Clamping force: 500 kN, Tool opening distance: 350 mm, Tool installation height min.: 200 mm, Plate spa ...
Presona LP 85 VH2 cross-tying baler, built in 2018 Specifications: Manufacturer: Presona Sweden Type LP 85 VH2 Year of manufacture 2018 Drive power 2 x 45 kW Operating hours 40,350 Effective operating hours approx. 22,000 Press force pre-press 28 t Press force main press 85 t Insertion shaft 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight 450 - 650 kg Theoretical volume: 1200 cbm/h Throughput at 30-100 kg/cbm: 13-30 t/h Tying 5-fold vertical, 3-fold horizontal Oil tank capacity 2000 L Transport dimensions press 10400 x 2400 x 2800 mm (LxWxH) Weight approx. 27000 kg The press was dismantled from ongoing operations. A spare parts package is included. The technical documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subje ...
1 of used film-only multi-packer, make KHS/Kisters, type SP A-H (Advanced, High-speed), with ST-A 1000 shrinktunnel, new 2015. Siemens S7, Indramat MI-Technik servos, automatic film splicer. Operating side: right. Used in a 60.000 cph line (+30% overspeed). Set for standard beverage cans (66 mm) packing them as 2x2=4, 3x2=6, 4x2=8, 4x3=12, 5x2=10 and 5x3=15. Quick change-over machine.
maximum number of results exceeded
please refine your search
