126,684 used machines on RESALE, but how to find them? Machine Search
Machine name: Dissolver Manufacturer: Schneider Maschinenbau Gmbh Type: SHDC15 KWFU Ex Year of construction: 2010 Speed: 150 - 1500 rpm Material: Stainless steel Engine drive: 22.55 kW Design: Explosion protection: II 2 / 3 D c T120°C Total capacity: approx. 900 liters 900 liter container Parts in contact with the product: Stainless steel Equipment: Hydraulically extendable Dimensions: Machine height approx.: 3100 mm, (upper part extended) Length, with container, approx.: 2200 mm, width with collet approx.: 1800 mm, pliers open Weight, without container, approx.: 1600kg Foundation load approx.: 6000 kg/m3 Empty weight: 1600 kg Tech. Documentation: Yes in PDF Accessories: Stainless steel mixing tank, Dissol glare: diameter 450 mm, Frequency converter Condition: Used Price: On request
Collar shelving, single-sided, 3 m height, low-1, 20 m, 750 kg per arm - Neuware -: Price from site including loading! 1 shelf unit with 4 stand EUR1.295.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: Shelf stand on one side approx. 3,000 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 750 kg each arm / 2250 kg per stand with 4 studs per arm tier 4 x 750 kg = 3,000 kg with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us!
; Gross weight [kg]: 532; Engine: Caterpillar C1.5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 55
Collar shelving, single sided, 4, 16 m high, 1, 20 m arms, 750 kg per arm - Neuware -: Price from site including loading! 1 shelf unit with 4 stand EUR1.450.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: Shelf stand on one side approx. 4160 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 750 kg each arm / 2250 kg per stand with 4 studs per arm tier 4 x 720 kg = 3,000 kg with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us!
Air-operated airless pump on pump trolley The T2001 piston pumps are robustly designed air-driven airless pumps designed for pumping, decanting and painting with multiple guns. The parts that come into contact with the material are made of stainless steel, carbide, PTFE or PE. An ATEX approval for use in potentially explosive atmospheres completes the picture and makes the pumps versatile. Below you will find the advantages at a glance: - Minimal pulsation for uniform material flow during conveying and spraying - Versatile use due to stainless steel, carbide, PTFE or PE in the material area - Suitable for liquid solvents and water-based materials - Easy commissioning due to self-priming system - Maintenance-free device, no lubrication required - Integrated safety valve in accordance with accident prevention regulations - Mobile versions on pump trolleys - ATEX approval E ...
Collar shelving, single-sided, 3.5 m height, 1, 20 m arms, 750 kg per arm - Neuware -: Price from site including loading! 1 shelf unit with 4 stand EUR1.350.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: Shelf stand on one side approx. 3500 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 750 kg each arm / 2250 kg per stand with 4 studs per arm tier 4 x 750 kg = 3000 kg with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us!
Te Koop: Koltek manifold: Three-way valve met air motor. Type 50 DH-53 2 duims met 3 aansluitingen.
KÄRCHER ROBO 30 pipe boring machine for pipes, flat material and profiles With this machine, tubes, flat material or profiles can be cut very quickly and accurately in a single pass. can be drilled or milled at an angle or at an angle up to 50° in such a way that filling rods or filling tubes up to 1" can be drilled or milled can be plugged through. With the standard additional clamp for the jaw chuck, you can not only cut pipes, but also transport flat material or other profiles with the feed and at the desired angle up to over Make 50° single-sided holes or through holes. The clamping jaws in the self-centering vice have a recess at the top for flat material. We are unrivalled when it comes to converting to another material! The feed is positioned at 0.1 mm with the counter with absolute or chain gauge. With the ROBO 30, you don't need to set limit switches or cams for ...
I am selling a Combined Machine Sliding Table Saw with Scoring + Milling Machine Manufacturer: FELDER Austria Model: KF700S. Built in 2011. Cutting length 3200mm. Saw blade and milling swivel 0-45° manual Saw blade and milling digital height adjustment Digital display of rip fence and working heights Insertion of the main saw blade and scoring machine from the aluminium format table. Main motor sliding table saw 3.0 KW / (3200/4500/5800 rpm adjustable) Scoring motor sliding table saw 0.75 KW Main motor milling machine 5.5 kW Tools, options, and accessories on the pictures included in the price. Very good condition. Available soon. Incl. full documentation and CE certificate.
Type: K728-1xx Model: 720-12-4-4 YOB: 1997 Performance: 18,000 bottles/h Running direction: clockwise feeding: straight parallel Aggregates: Agg 1 PWL 370, AGG 2 PWL 300 Bottle table: cam Guiding: infeed 2 x, 1 x discharge Label L =: min. 40mm, 130mm Bottle diameter: min. 50mm, 110mm Bottle height (H): min. 150mm, 350mm Voltage: 230/400 V Electricity: 3PH/PEN Nominal frequency: 50 Hz Control voltage: 24 V Label: Body, back, neck Machine dimension: L = 2, 40m x W = 2, 30 m without partly overlapping of the unit and discharge extension.
Technical details: - Spindle diameter: 400 mm - Max. diameter of milling tool: - Mechanical spindle height adjustment with analogue scale - Foldable rolling table - Rolling table travel max. 1,430 mm - Table length: 800 mm - Table width: 385 mm - with eccentric pressure apparatus - 1 x extraction nozzle milling machine, diameter 160 mm - 1 x suction nozzle saw, diameter 80 mm - Max. diameter of saw blade: 400 mm - Saw blade shaft diameter: 30 mm - 1 x saw blade QW 2020 x 400 x30 mounted - 1 x splitting wedge mounted - 2 x engine brake installed - With aliminium length stop (length 3,000 mm) Engine data milling unit: - Voltage: 400 V - Current: 15 A - Frequency: 50 Hz - Power: 7.5 kW - Speed: 2,850 rpm Engine data sawing unit: - Voltage: 400 V - Current: 4.8 A - Frequency: 50 Hz - Power: 2.2 kW - Speed: 2,760 rpm Dimensions (LxWxH): 2,000 x 1,530 x 1,61 ...
Te Koop: Pneumatic of acuator ven keystone. Model: 790-036
Capacity , ton: 800 Stroke, mm: 320 Strokes/min: 20 Shut height, mm: 900 Bed to ram adjustment stroke, mm: 320 Bed dimensions, mm: 2500x1600 Main drive motor power, kW: 75 Overall dimensions, mm: 4220x3500x8356 Weight, ton: 96,6
Bone Band Saw KOLBE K330 Specifications: Type: Kolbe K 330 400 V / 50 Hz / 1.5 kW / 3.4 A Year of construction: 2008 Max.: 260 mm Cutting height passage max.: 310 mm Table dimensions: W59 x D76 cm Machine dimensions: H161 x W72 x D80 cm Band saw size: 2490 x 16 mm Weight: approx. 155 kg Equipment: Device completely stainless steel Stainless steel base Work table can be folded out for easier cleaning (optional equipment!) Material pusher (removable) Side guide (removable) including 5 pieces of new saw blades Left-hand delivery Protection Engine Brake Function tested, machine ready for immediate use Stock machine, immediately available! Condition & accessories see original pictures. If you have any questions, email or call. 03423-706493
Vacuum pump Manufacturer: Kinney Type: KT-505 LP Status: used; ready for operation
Kolbus Perfect Binding Line, Equipped With: Gathering Machine: Kolbus ZU 804, AGE: 2006, Basic Frame with 21 Gathering Stations, 20 Standard Feeders, 1 Hand Feeding Station, Book Block Feeder, ZA 800 Stacker Delivery, AGE: 2006, Kolbus VA 422 End Sheet Unit, AGE: 2006, Air Center Becker CS ZU804/01 Vacuum Unit, AGE: 2006, Reject Unit AS 841 To The Right, Integrated Jogging Station, Transfer Channel As Connecting Unit To The Binder. Perfect Binder: Kolbus KM 473, AGE: 2006, 32 Clamps, Hand Feeding, Co-Pilot System Monitor, Main Milling Station, Equalized Milling Station, Notching Station, Micro-Notching Station, Brushing Station With Roller Brush, 2 x Pre-Melters LH 370, AGE: 2006, Nordson PUR Spine Gluing System, Hotmelt Spine Gluing Unit, Hotmelt Side Gluing Unit, Gauzing/Lining Station, IR Heating At Curve, Scoring Station For 4 Scores, 2 Pressing/Nipping Stations, Stream Cover Feeder ...
Te Coop: SMC luchtsturingskleppen ECC 512 M met 10 aansluitingen by blok
Te Coop: SMC luchtsturings kleppen VFS 2110 met 10 aansluitingen by blok
automatic baler Manufacturer: PAAL Type: KONTI 275 C Year of construction 1996 specifications: Press force: 65 t Specific pressing force: 7.88 kg/cm² Channel format: 750 x 1,100 mm Bale weight: 450 - 600 kg, depending on material and bale length Filling opening: 1,550 x 1,020 mm Drive power: 45 + 30 kW Throughput: 380 m³/h Pressing capacity: - approx. 13.0 t/h at department store (35 kg/m³ bulk density) - approx. 23.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 35.0 t/h for collected goods (100 kg/m³ bulk density) Setting: 4-fold vertical Machine weight: approx. 21.0 t Optionally with feeding belt according to photos
nett cooking length ± 12.500 mm belt width ± 700 mm all stainless steel with 2 hoists 16 fans infeed conveyor outfeed conveyor washing system (conveyor) steam heated max. product height : ± 180 mm dimensions (l x w x h) : ± 14.600 x 2.400 x 4.400 mm adjustable speed
Te Coop: SMC Luchtsturings kleppen VFS 2110 met 14 aansluitingen by blok
; Gross weight [kg]: 706; Engine: Caterpillar C2.2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 55
; Gross weight [kg]: 608; Engine: Caterpillar C2.2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 66
used
Qty. 1 Second-hand aluminium foil rolling mill line Mfc.: Kyongil Machinery Built: 2003 Stopped: 2015 Type: 4-Hi Strip width: 850 mm Thickness Entry: 0.3 mm Exit: 12 microns Consist of: Foil rolling mill Foil separator Doubler Annealing furnace
Assembly angle on both sides with threaded plates brand: Otto Kraft height 835mm ; Width 550 mm ; Length 450 mm plate size 750 mm x 500 mm All details without gewaehr
Used Chain Conveyor Belt Manufacturer: PAAL Type: KEM 1500 Year of construction: 2008 specifications: Conveyor width: approx. 1,500 mm Wheelbase:approx. 9,625 mm Strip course: approx. 2,935 mm horizontally underfloor, then rising to a length of approx. 4,500 mm below 28°, sloping below 10° on the remaining length and conveying into the press Conveyor belt speed: 0.27 m/sec Conveyor belt drive power: 4.0 kW Sidewall heights - in the horizontal part: 527 mm - in the climbing section: 777 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE as far as possible pre-assembled, consisting of: - Strip scaffolding in solidly welded section steel and sheet steel edge construction, - additional sliding guides underneath the belt support profiles in the horizontal and climbing sections to support heavy loads, - Conveyor belt (quality: EP 200/2 2:1) with 2 ...
Kortho Graphicjet X-18 Inkjet Printer High-resolution inkjet printer for absorbent and smooth surfaces The most advanced Hi-Res inkjet for 18mm high prints Launched in 2015, the X-Series Graphicjets are Kortho's newest and most advanced Hi-Res inkjet printers. In terms of mechanical engineering, the X-Series printers with their capillary ink system are a further development of our proven 18P. However, the X-series printers have a Windows operating system. In addition, its Nicelabel Windows driver makes it possible for this printer to print directly from any Windows software or ERP system. The X-Series features an 8" color touchscreen with integrated label management and design functions. This eliminates the need for external devices or connections during standalone operation. In addition, this printer can print at a speed of up to 60 meters per minute, up to 120 m/min at lower r ...
Robots industrial robots KUKA KR200-2 comp Built in 2007 Reach 2400mm Weight 1267kg Load 200kg Control KRC2ed05 Weight 185kg Processor 2 GHz WinXP language Software version V5. 6.6 Teachpendant KUKA KCP2ed05 Connection cables 7 m / 15 m (several Creative Commons, orange)
Oil-glycol plant Technical data Manufacturer: KME Year of construction: 2004 ATTENTION: SOLD IS ONLY TO PROFESSIONALS. All information without guarantee
Robots industrial robots KUKA KR200L140-2 comp Built in 2007 Range 2800mm Weight 1267kg Capacity 200kg, 140kg Control KRC2ed05 Weight 185kg Processor 2 GHz WinXP language Software version V5. 6.6 Teachpendant KUKA KCP2ed05 Connection cables 7 m / 15 m (several Creative Commons, orange)
Key data: 1000 KW, 1250 kVA
ENGINE: Cummins KTA38-G9 FREQUENCY (HZ): 50 VOLTAGE (V): 400/230 POWER: 1250kVa / 1000kW STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 8200kg DIMENSIONS L/W/HEIGHT (MM): 445018502350 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your deta ...
Robots industrial robots KUKA KUKA KR100-3 comp safeÂrobot KRC2ed05 Year 2011 Reach 2400mm Weight 1155kg Load 100kg Control KRC2ed05 Weight 185kg Processor 2 GHz WinXP language Software version V5. 4.14 Software safeÂrobot V1. 1.1 Teachpendant KUKA KCP2ed05 Connection cables 7 m / 15 m (several Creative Commons, orange)
Rotary vane vacuum compressor - dry running Manufacturer: Becker Type: KVT 3.100 Engine: 400V status: rebuilt and new painted Warranty: 12 months; ready for operation
Maximum force ton-force 400 Slider stroke length mm 250 Slider stroke length to lower position mm 12 Slider strokes per minute 25 Number of single turn-on 19 Maximum distance between table and slider (in lower position of slider) mm 510 Adjustment mm 160 The sizes of a under-forginig plate mm 1000 Table overall dimensions: mm ·from front to rear 1000 ·from left to right 1000 The sizes of an aperture in a table mm 630 Slider overall dimensions mm 800 x 800 window dimensions in cheeks mm 600 Total power of electric motors kW 43,3 Press overall dimensions mm ·length 3470 ·width 3140 ·height 5940 Press weight without hydropneumatic pillow kg 31 400
Robots industrial robots Manufacturer: Kuka KUKA Type: KR210-2 Serie2000 Year 2011 Reach 2700mm Weight of 1430kg Load 210kg control KRC2ed05 Weight 185kg Processor 2 GHz WinXP language Software version V5. 6.6 Teachpendant KUKA KCP2ed05 Connection cables 7 m / 15 m
Transfer press KRUPP PST-A 160 built in 1980. Technical data of the KRUPP PST-A 160 press: - nominal pressure: 160 tons - cutting force grade 1: 400 KN - force between stands: 1200 KN - number of working steps including cutting stage: 11 - distance between stands: 200 mm - slider stroke: 210 mm - drawing depth: 70 mm - range of jumps, infinitely adjustable: 15-75 / min. - production range of jumps with repeatability of its setting: 25-75 / min. - number of actuation movements: 15-25 / min. - a usable work resource for a jump in the range of 25-75 strokes per minute. : 20,000 J - maximum load on a single step: 500 KN - maximum load of a single step using inserts: 630 KN - maximum width of the tape: approx. 340 mm - maximum diameter of the cut: 120 mm - minimum diameter of the pattern: 30 mm - distance between stands: 2450 mm - height of tool building at the lower posi ...
Scanners Manufacturer: Kodak Type: i820 Technical data Optical resolution 300 dpi Tonal output resolution: 200Â EUR \"400 dpi color / grayscale: 100Â EUR\" 300 dpi MAX DOC size 305 x 768 mm (12 x 30 in.) MIN DOC size 64 x 64 mm (2.5 x 2.5 in.) FEEDER 1,000 sheet QuickSet elevator with a self reset mechanism to record variable batch sizes Daily Scancvolumen: 60000 There are 2 common devices. The price is for 1 unit. All information without guarantee
Manual tool change Tools with PU scraper Machine including a wide range of round, square, slotted hole and cutting tools including tool presetter the stop rails are manually adjusted and clamped on the table using a scale embedded in the table, the stroke is triggered by a foot pedal fully hydraulic Punching pressure: 200 kN Colour: grey/blue Total power requirement:16 A Projection: 450 mm Punching capacity max.: Punching diameter 105 mm Max. stroke length: 0 - 35 mm Working area: 450 x 800 mm Table size: 1300 x 650 mm Strokes per min.: 150 strokes/min Connected load: 6 kVA Motor power: 5.5 kW Dimensions: 1400 x 1300 x 1700 mm Weight: 2400 kg Machine Number: 69
Lawn Sweeper for PTO 540 rpm, working width 180 cm, double Sweeper roller system, hydraulic high dump, electrical. Remote control acting on solenoid valves, ew 1 hydraulic connection required. Tank contents approx. 3 m ³, rear axle 6 x frosted. Drawbar adjustable in height, illumination device com. StVZO. Machine is relatively little used, brushes and Tin in good condition with paint defects inside the tank and signs of use. Incl. operating instructions, parts list, and ABE. Type same Kugelmann KDH 150 (150 cm working width) also available and more with working widths from 90 to 170 cm. -Jacobis local, environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...
NEW replacement - compatible - on request Diosna 80 stainless steel SPIRALS/tools / 120-120 A / 160-160 A / 180-180A / 200 - SP 200 A Kemper 30 / 50 / 75-75 A / 100-100 / 125 / 125A hand locking and 125A automatic locking
with lifting function without decoiler Colour: grey Load capacity: 2000 kg Sheet width: 1250 mm Dimensions: 1000 x 1250 mm Weight: 100 kg The KRASSER Coilbox allows you to align your coil trolley or coil rack quickly and easily. The coil box lifts your coil wagon or coil frame by means of a hydraulic foot pump and the coil can then be easily moved in the X-axis by means of a small hand crank A line laser attached to the machine helps you with correct positioning, so the tedious alignment of coils is a thing of the past When ordering, please provide us with your coil rack/trolley footprint dimensions so that the coil box is the right size
Make: KÜBA Type: SGK 153 Slats distance 10mm Length: 4200mm Volume: 161.20 l Power approx.80KW at minus 40C foldable with insulated drip fir with 3 fans WOODS, total power 6300 watts for shock frost 2 pieces available Info: 0043-6641838175 or info@frigocom.at Price on request
KOLZER DGK36″ PVD sputtering machine was built in 2017. This specially constructed machine is used in the vacuum coating process, after which the workpieces are characterised by a metallic effect” with high resistance to abrasion and chemical agents, as well as innovative colours. The PVD sputtering process involves the expulsion of metal atoms from a target (evaporation material) placed in the working chamber, which are then transferred and deposited onto the surface of the workpieces. In this operation, the target is exposed to a technological vacuum, consisting of process gas and high voltage. At the end, the workpiece surfaces are cleaned and activated by the plasma installed in the machine. This solution offers virtually unlimited possibilities for coating any type of surface. In order to meet all demands and requirements, the KOLZER magnetron sputtering machine meets the hig ...
Block vane vacuum pump status: used, tested, working Manufacturer: Kinney Type: KT-300 D Engine: 400V Resources: Mineral oil Nominal: 25 m ³/h Discharge pressure: < 0.008 mbar (ABS.) Includes: user manual Oil (mineral oil) delivery: ex works; ready for operation
SOS block bottom bag machine 2 plies 4 colour tail end printer photo cell for preprinted paper Bag width: 12-26 cm Tube length: 25-47 cm Bottom width: 4-12 cm
maximum number of results exceeded
please refine your search
