70 k used for sale

Tray trolley, paint drying trolley, specialized transport trolley, transport trolley, platform trolley, carrying arm trolley -Hardware trolley: Heavy-duty paint drying trolley with 16 levels -Total length: 1200 mm -Total depth: 700 mm -Total height: 2000 mm -Number: 9x transport trolleys available -Price: per piece -Weight: 60 kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, bus module, bus module -Manufacturer: Siemens Simatic S5 bus modules -Type: 6ES5 700-8MA11 -Number: 9x module available -Price: per piece, minimum order 2 pieces. -Dimensions: 165/90/H40 mm -Weight: 0.3 kg/piece

clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, cranked clamps -Manufacturer: AMF, clamping iron DIN 6314-26x200 2 pieces -Order No.: 70094 -Clamping bracket: 200/70/H30 mm -Groove: 80 x 26 mm -Price/Delivery: complete -Transport dimensions: 200/70/H60 mm -Total weight: 5.2 kg

container turning device, welding turning device, welding turning device, welding device, welding turntable, welding turntable and tilting table, welding turning device, welding turntable tilting table -Handover: in current condition as viewed -Condition: without drive motors / control, see photos -Welding rotating device: pivoting -Turntable: Ø 700 mm -Projection: 930 mm -Transport dimensions: 1240/730/H1640 mm -Weight: 643 kg

Roller conveyor, roller track, powered roller conveyor, roller track -Roller conveyor: driven, with sensor switch / without control -Drive motor: 0.37 kW -Speed: 18 m/min -Roller width: 700 mm -Roller diameter: 64 mm -Axle spacing: 200 mm / adjustable -Conveying length: max. approx. 2730 mm -Overall dimensions: 2800/775/H515 mm -Weight: 201 kg

PLC control, digital input, digital input -Manufacturer: Siemens, Simatic S5 Digital Input Digital Input 2 pieces with bus module -Type: 6ES5 421-8MA11 / 6ES5 421-8MA12 -Bus module: Siemens 6ES5 700-8MA11 -Number: 1x double module available -Dimensions: 165/100/H125 mm -Weight: 0.7 kg

Pump control for centrifugal pumps, high-pressure pumps, water pumps, multi-stage vertical centrifugal pumps, control units, comfort control technology -Manufacturer: Wilo, control unit with control board / control card -Control device: Type CR system -Control card/board: 7022034.3 CR-LP-N 002 008 008 -Shipping/Price: complete -Dimensions: 270/230/H90 mm -Weight: 2.1 kg

Lifting mast, stacker mast, forklift mast, lifting frame, rear stacker, triplex mast -Manufacturer: Clark EML, forklift mast triplex mast type 7000 T -Load capacity: 5000/800 kg -Lifting height: 7500 mm -Height: 3860 mm -technical data: see photo type plate -Recording/Dimensions: see photos / technical drawing -Dimensions: 3730/1300/510 mm -Weight: 2100 kg

Workbench, work table, assembly bench, assembly table, worktable, mobile workbench, sewing machine table -Work table: Electrically height-adjustable work table, solid construction with casters -Tabletop: 1400 x 700 mm -Height: 810 to 1180 mm -Drive motor: Baifu 51K120GU-CM-P 230V 120W -Base: 4 swivel casters with locking brakes -Transport dimensions: 1400/700/H810 mm -Weight: 62 kg

Workbench, work table, assembly bench, assembly table, work table -Manufacturer: Lista, workbench with vise / solid construction with drawers -Worktop: approx. 1250/700/H850 mm -Drawers/Cabinet door: lockable, without key / Layout/height see photos -Vice: Heuer Front, height-adjustable and rotatable -Clamping jaws: 180 x 30 mm, clamping range 230 mm -Transport dimensions: 1250/960/H1140 mm -Weight: 138 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer -Manufacturer: Plan, heavy-duty transport wagon with single-axle turntable steering -Platform: 7015/2000/H730 mm -Load capacity: 16 t -Tires: Solid rubber dual tires, see photos -Overall dimensions: 8675/2000/H730 mm -Transport dimensions: 7015/2000/H730 mm -Weight: 1940 kg

Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm -Motor: Teknodan 3 kW 2850 rpm -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete -Overall dimensions: 1000/900/H1685 mm -Total weight: 228 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer -Manufacturer: Plan, heavy-duty transport wagon with single-axle turntable steering -Platform: 7000/2000/H730 mm -Load capacity: 15 t -Tires: Solid rubber dual tires 425/150-305 see photos -Overall dimensions: 8665/2000/H730 mm -Transport dimensions: 7000/2000/H730 mm -Weight: 1940 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer, industrial heavy-duty trailer -Manufacturer: Plan, heavy-duty transport wagon with 1-axle turntable steering -Platform: 7000/1500/H735 mm -Load capacity: 15 t -Tires: Solid rubber dual tires, 4 pieces, 425/150-305, see photos -Overall dimensions: 8570/1500/H735 mm -Transport dimensions: 7000/1500/H735 mm -Weight: 1840 kg

Machine light, machine lamp, work area light, recessed light, LED recessed light, test light, panel light, ceiling recessed light -Manufacturer: Brioner Leuchten, recessed light with 12W LED -Type: 7052-016 -Connection: 230 V -Number: 2 lights available -Price: €20 per piece/ for the whole -Dimensions: 170/170/H30 mm -Weight: 0.2 kg/pc.

Manufacturer: Bürkle, Type: RCLS 700, Year: 2014, Finished product: Betonplatten, Work piece width min-max mm: 700, Min.-max. workpiece height in mm: 3 - 80, Min.-max. workpiece length in mm: 400, Feeding speed min-max m/min: 2 - 10, Control: Bürkle, Inlet conveyor: no, IR-Trockner 1: 20 x 3 kW, Transport 1: Band/Stange, Lackwalze 3: RCLS 700, UV Trockner Lampen/Watt: 120, UV Trockner Lampen/Watt: 120, Paint rollers overall: 2, UV Trockner gesamt: 2, IR-Trocker gesamt: 1, UV Trockner gesamt: 2, UV dryer: Easy Cure UV 700, Conveyor belts: 0, FREE TEXT: einschl. Dosierwalzenheizung, Year :2014

Manufacturer: Comil, Type: Astro 700, Hochschränke und Hänger: 680, Work piece width min-max mm: 300 - 2500, Min.-max. workpiece length in mm: 300 - 1300, Min.-max. workpiece height in mm: 800, Working width min min mm: yes, Hydraulical/pneumatical: yes, Min.-max. pressing length in mm: 1300, Min.-max. pressing depth in mm: Pressbalken, Cylinder horizontally: no, Pre-assembling conveyor: 22,5, Feeding speed continous adjustable: jyes, Distribution carriage: yes, Pufferband Länge mm: automatisch, Assembly line 1 tall cabinets: 6, Discharge belt roller conveyor height: 7, Machine rigging: 2860, Press power kg /cm²: 7500, Weight approx. kg: inkl. Auslaufband 800 X 200,

Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1500 mm Free frontal opening L-R: 3800 mm Free lateral opening F-B: 1450 x 1100 mm Table surface area : 3500 x 1900 mm Slide area: 3500 x 1900 mm Die cushion capacity in table: 150 ton Die cushion stroke: 250 mm Die cushion pad area: 2780 x 1570 mm Number of strokes: 7 - 18 s.p.m. Required power: 120 kW Height over floor approx.: 9510 mm Weight of machine approx.: 260 ton

Transnorm roller curve conveyor 90°-770-700 IR800 Make: Transnorm Type: TS 2712 Year of construction: 1996 Conveying speed V= 0,58 m/sec Conveying angle: 90° Roller width: 600 mm Outer width/nominal width (NB): 680 mm Inner radius: 800 mm Drive chain drive Rollers: plain bearings with conical plastic molded part Transport weight: 130 kg on Euro pallet Transport mast: L x W x H = 1800 x 900 x 450 mm Scope of delivery: without supports (please enquire if required) Optionally available supports Side guides Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Antrieb: SEW Getriebemotor Running direction: links/ rechts nominal voltage: 380-500V Construction year: 1994 Drive type: Kette condition: very good (used) Nominal / inner radius in mm: 800 Nominal / outside width in mm: 770 Roll width in mm: ...

external diameter: 420 mm internal diameter: 100 mm width: 5 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with single-axle turntable steering -Platform: 7000/2000/H910 mm -Load capacity: 21 t -Tires: Vorwerk 645/300-410 solid rubber -Drawbar length: 1900 mm -Transport dimensions: 7000/2000/H910 mm -Weight: 2630 kg

Rolandmatic dampening with Technotrans Kombistar, APL, ink temperature control, ColorPilot , Quick change Job1, Quick Change Wash, Alcosmart, Powdersprayer Grafix Cantronic, Quickstart,all washers, cardboard guides, ink declutch, Anilox coating sytem with quick change clamp, IR-dryer, Hotair and AMS LED UV dryer in delivery approx. 155 mil impressions

The Siebtechniek CONTURBEX is a continuously operating filtration centrifuge and it achieves his flexibility by means of a centrifuge scroll driven at a differential speed. The unique functional principle of pre-accelerated suspension feed to the screening device, combined with homogeneous distribution by means of the worm, enables this centrifuge to perform complex tasks. We achieve optimum dewatering results by adapting the machine parameters, G force and dwell time. The solid material is conveyed by means of a worm rotating at a different speed from the bowl. Solid and liquid are conducted away into separate housing sections. Mother liquor and washing liquid can be drained away separately from each other. The drive for the SIEBTECHNIK screen worm centrifuge stands out for its powerful gear units and a high-quality bearing support. A central oil-circuit lubrication system supplies all  ...

pressure: 36 t chamfer lenght: 1020 mm distance between columns: 932 mm throat: 150 mm stroke: 120 mm useable dayligth: 295 mm Y-working travel: 10/25 mm/sec Y-rapid travel: 220 mm/sec work height max.: 1150 mm weight of the machine ca.: 2.600 kg dimensions of the machine ca.: 1805x1330x2380 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Linde used chirogenic spiral food freezer Crygoline series type XF 700.

General SKU098F495 MakeProvatech GmbH (Waldner) TypeVakuum Trockenschrank VTP 700/930 Ex Year of construction1997 LocationBarneveld Pressure Working pressure0.025 Bar Vacuum possiblecheck Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume260 Ltr. Surface1 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housingcheck (1.4571) Stainless steel trayscheck Mirror polished Heating surface1,0 m² Drying chamber capacity260 Ltr Drying chamber sizes700x445x930mm Max. temperature80°C. With jacket27 Ltr. Max. temperature80°C. Number of trays4 (+ bottom) Tray sizes500x400mm Distance between the trays150mm With 1 doorWith electric (water) heating Connection for the vacuum pumpcheck With vacuum pumpcheck make SIHI Motor± 0,25 KW MaterialStainless steel 1.4571 (316Ti) Information With switchcheck (as is) Floorspace1,9x1,2  ...

Drying oven, with built-in fan and extraction pipe 30°C to 300°C 7.5 kW functional, relatively heavily soiled

Transnorm belt conveyor GF 3250-700-600 RA2470 Technical data: Conveyor length (NL): 3250 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): 0.5 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 1994 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 3250 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Ampere: 1,30 scope of delivery: without support ...

Engine Brand: MTU, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Injection Type: ECU (Electronic Control Unit) , Generator KVA: 700 , Generator Hz: 50 , Generator Volts: 230/400 , Generator Amps: 1010 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/mtu-12v1600g10f-generator-700k va-used/589, , = More information =, , Type number: 12V1600G10F GENERATOR 700KVA

General SKU079P422 MakeHaagen+Rinau TypeSO 700 No.8713258 Year of construction1983 Mounted on legscheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket10 Bar Main Features MaterialStainless steel Volume993 Ltr. Motor1.2 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity993 Ltr. Vessel sizesDia. 1000 x 100mm Dished bottomcheck OutletDia. 40mm With jacketcheck Max. temperature160/183 Dgr.C. With propellor stirrercheck Motor0,7/1,2 kW (380 V) Speed mixing shaft425/940 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information LocationBarneveld With switchgear(sizes 1,2 x 0,5 x 2,1 m) as is Floorspace2,0 x 1,3 m Total height4,5 m Weight2500 kg Extra Specifications- Mirror polished - Hydraulic lifting cover and stirrer Catalysts & fillersStainless Steel ReactorsSolventsDiscountDetergent & su ...

General SKU014G031 MakeMachinefabriek Vrieco Zelhem B.V. TypeS 70 RB-S Mach.No.52624 Year of construction1978 Pressure Working pressure0.2 Bar Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume7000 Ltr. Motor15 KW Specified Features - Conical mixer Conical mixercheck Capacity8700 Ltr (7000 ltr nett) Largest cone diameter2950 mm Cone height4300 mm Dished topcheck Manhole500 mm With stainless steel armcheck Top drivecheck Motor13,0/20,0 kW (380 V) Motor1,1/1,8 kW (380 V) Bottom bearing pintle bearingcheck With jacketcheck Max. temperature120 degC Outlet with sliding valvecheck MaterialStainless steel 1.4541 (321) Information LocationBarneveld Floorspace3,0 x 3,0 m Total height4,3 m Extra Specifications-- RECONDITIONED -- Catalysts & fillersFeed additivesPaper & otherDiscountOther pharmaceuticsSugarAnimal feedOther feedSolid pharmac ...

General SKU292T670 MakeVan Tongeren kennemer BV TypeZ43430 Mach.No.T4404 Year of construction2015 Main Features Motor3 KW Length7000 mm Inlet diameter430 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Tube-typecheck Diameter420 mm Length7000 mm Shaft diameter260 mm Pitch200 mm Inletdia. 430 mm Outletdia. 221 mm Max. temperature100 °C Motor3 kW 219-241/380-420 Volt (Ex) Height between in- and outlet5890 mm MaterialStainless steel 1.4301 (304), Stainless steel 1.4401 (316) Information LocationBarneveld Floorspace0,7x8,9 m Total height0,9 m CEcheck ATEX compatiblecheckCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlas ...

Code: 0221 Brand: CENTAURO Model: CO 700 - CE Standard Band saw with covered wheel for cutting wood materials, joinery, furniture, furnishings, window frames , doors, plastics, aluminum, composite materials and various - CE Standard Technical data: Diameter of flywheels mm 700 Width of flywheels mm 40 Max cutting height mm 435 Height of worktable from ground mm 940 Min/max blade length 5040/5180 Motor power Hp 4 Diameter of suction mouth mm 100 Tilting table Overall dimensions: mm 1350 x 800 x 2300 h Weight kg 400

CONTROLS   CNC controls SLM ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2600 mm   space requirements -front/back-: 1200 mm   total height: 2700 mm Machines in excellent condition serviced annually by the manufacturer (service reports available). ... Accessories: - HRS050 L/W cooling package, - PSM100 V3 sieving station, - BPH280 handling unit and bottle lift, - Material change kit, - SLM280 2.0 complete including PSM100, - Powder hopper, - Substrate plates (1.2709 & AlSi10Mg), - Additional filter housings and filter elements, etc. Build volume: 280 x 280 x 365 mm minus substrate plate height Machine configuration: Single optic, 1 x 700W Build rate: up to 113 cm³/h (material dependent) Laser lifespan: 1500 h Variable layer thickness:  ...

Punching capacity: 220 kN laser capacity in Watt: 4000 travel -x axis: 3050 mm travel -y axis: 1550 mm Cutting capacity structural steel: 8 mm Cutting capacity stainless steel: 8 mm Cutting capacity aluminum: 6 mm workpiece weight: 280 kg weight of the machine ca.: 24.000 kg dimensions: 10130 x 8898 x 2328 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 700 , 1670 , 110

Screw diameter: 110 mm Injectable volume / Shot volume: 4750 cm3 Injectable weight / Shot weight: 4320 g Injection pressure: 1670 bar Column passage / Bettween tie bar: 900 x 1000 mm Mold Thickness /Tickness tie bar: 400-1000 mm Opening stroke: 1000 mm Ejection stroke: 350 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor

Cutting height: 195 mm saw-blade dia.: 550 mm Motor output: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool milling machine Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ...

Tool milling machine Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ...

turning diameter:356 mm turning length:705 mm control: CELOS M730 UM MAPPS swing dia.:742 mm standard turning diameter:275 mm travel -x axis:260 mm travel -y axis:100 ( ±50) mm travel -z axis:795 mm rapid travel - longitudinal/face:30 / 30 m/min Rapid travel B-axis (parts transfer subspindle):734 m/min Spindle 1 RPM:4000 1/min Spindle 1 Power:15/18,5/18,5 kW Spindle 1 Torque:409/505 /599 Nm Spindle 1 max. bar diameter:80 mm Spindle 2 RPM:4500 1/min Spindle 2 power:7,5/11 kW turret stations / rotary tool stations:20 / 20 BMT40 speed of driven tools:10000 1/min :3.7/5,5/5,5 kW torque rotary tools:14 / 24 Nm total power requirement:38 kVA weight of the machine ca.:6,3 t dimensions of the machine ca.:4 (9) x 2,1 x 2,2 m Parts catcher:Sp. 1 und Sp. 2 Spindle 1 Chuck:Kitagawa B 210 (250 mm) Spindle 2 Chuck:Kitagawa B 206 (160 mm) Tool presetter:Spindle 1 & 2 High precision Turning and Millin ...

x-travel:6.300 mm y-travel:2.000 mm z-travel:2.700 mm tool taper:ISO 50 surface area:7.000 x 3.000 mm turning speed range:60 - 4.000 U/min power capacity:22/30 kW feeds:0 - 10.000 mm/min rapid traverse:20.000 mm/min Tool changer:80 max. workpiece weight:8.000 kg Plate clamping area 7,000 x 3,000 mm CNC rotary table 1,500 mm Orthogonal milling head Deep drilling unit IKZ Paper belt filter Measuring probe

x-travel:700 mm y-travel:450 mm z-travel:500 mm total power requirement:23,4 kW weight of the machine ca.:3100 kg dimensions of the machine ca.:3200 x 4000 x 2500 mm tool taper:ISO 40 feeds:0,2 - 0,6 - 0,12 mm/U spindle speeds::20 - 3150 , direkt programmierbar /min feed range:1 - 3000, in B=0,01 - 3 U/min rapid traverse in x-y-z axis:6m/ min, B = 7,6 U/min work table::NC Rundtisch(B-Achse) D=630 mm, 9T-nuten control:CNC432

bore capacity in steel (diameter):100 mm max. pitch circle:7000 mm number of spindles:2 bore spindle turning speed range:1 - 3000 U/min high speed spindle taper ISO:50 bore slide stroke:900 mm feed speeds:1 - 6000 mm/min max. workpiece weight:18000 kg total power requirement:125 kW dimensions of the machine ca.:13 x 11 x 5,1 m with CNC SIEMENS 840 D Workpiece clamping up to dia. 7000 mm The machine is equipped with 2 drilling spindle supports and through spindle coolant (50 bar)both supports can drill simultaneously. Spindle taper SK 50, 2 stages 1 -600 rpm 1650 Nm and 1 - 3000 rpm. 300 Nm Chip conveyor and coolant device

Collet holder long design for tool grinding machines, production and grinding. Recording: SK 50 Werkstückspindelseitig. B-32 or BCR collets for technical details and dimensions, please please contact us.

Diesel generator set 125 KVA Iveco 6Zylinder year 1994,6900 hours Schallgedämmt. Ready and available in 59557 Lippstadt Nationwide delivery cheap Ask for more'm under 0172 72 653 24 available daily 8-22 h

maximum board thickness. 800 gsm Corrugated board types: N, E, F Speed 400 m / min. Max. Inching 10 m / min. maximum thickness of the folded box 20 mm maximum inlet width 1100 mm Dimensions 15 x 1.70 x 1.90 m Weight 7.6 T required power 15 kW required compressed air 6 bar Compressed air capacity 60 L

KROENERT PACK 600 WITH TPC type KRA 250 water Chiller Coating and Laminating Machine PAK 600 For following operations: Wax Laminate / Coating - one sided 2 - 30 g/m2 Hotmelt Coating at temperature 10 - 40 g/m2 For the following materials: Unclad Aluminiumfoil 9 -150 my Flexible films like PE, PP, PVC, PVDC, PVA, Polyester and Polyamide films. Cellophane and cellulose acetate films Paper and material combinations. Max Mechanical speed V = 100m /min Realisable speed depending on material and application grammage. The Complete drive assembly was overhauled in 2016 for R 1.2 million.

Immediately available New cabins KPO-2 and KPO-2o 900 x 1800 x 880 Price from 4,900 + freight

Corner cutting Krause

2001 Kasto KASTOFUNCTIONAL A Kastofunctional type 6420 (year 2001) GHA SCH Cutting range max. 260 mm Mitre angle +/- 45° Drive power 1.5 kW 2000 Kasto SSB 260 VA-CC Kasto automatic band saw SSB 260 VA (year 2000) GGA Cutting range max. 260 mm - Automatic material feed - Infeed and outfeed - roller conveyors Drive power 4 kW