70 k used for sale

Key data: 1600 mm, 710 mm, 700 mm

HEIDENHAIN TNC 124 Travel X-axis Travel X-axis 1600 mm Travel Y-axis Travel Y-axis 710 mm Travel Z-axis Travel Z-axis 700 mm Height table to vertical spindle 50 – 750 mm Height table to horizontal spindle 60 – 760 mm Working table Working table 2200 x 550 mm Table load 3000 kg Drive power AC milling motor Main motor power AC 11 kw Tool taper ISO 50 Spindle speeds stepless 40 – 1600 rpm Feeds x,y feeds x;Y 2000 mm/min Rapid feed x,y, 5000 mm/min Feed Z Feed Z 1000 mm/min Rapid traverse Z Rapid feed Z 2500 mm/min Machine weight approx. Machine weight approx. 8000 kg Equipment Electronic handwheel / elctronical hand-wheel HEIDENHAIN Table enclosure Hydraulic tool clamping Universal milling head Coolant system Bodenwanne / floor-pan Documentation Additional /additional Completely new replacement gearbox from spare parts stock Completely new gea ...

Number of boring spindles: 4 St. Working width: 180 mm Working height: 120 mm Feed speed: ca. 10 m/min m/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mosca pallet press complete with conveyor technology Type: KPM 131 Year of Make: 1996 Control: S5 (conversion to S7 possible) Passage width: 1200 mm max. Flow height: 1500 mm max.

Key data: 450

The Klingelnberg PEK 300 H bevel gear testing machine is designed for universal single-flank rolling testing of bevel gears and crown gears. Here, gears can be measured and graphically evaluated by means of single-flank rolling testing. These test methods are particularly suitable for determining defects in the gear geometry such as concentricity and axial running properties, rolling deviations or pitch errors. Here, a practical installation situation of a gear outside the gearbox is simulated under real load conditions and then evaluated. Deviations in the gear geometry, machining errors due to defective tools and damage to the gears can thus be detected and eliminated even before assembly. The following parameters can be measured here: » Single-flank deviations Fi', fi', fl', fk' » Crossing, Runout Roundness (Option) » Carrying diagram with digital camera » Pit ...

Key data: 540

The Klingelnberg GKP 90 bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies, for the process of noise and contact pattern tests on bevel gears and hypoid gears. Technical data Diameter: 540 (400) mm Hypoid: ±50 mm mm Pinion spindle Dm: 90 mm mm Dimensions: 1,800 x 1,800 x 1,600 m Machine weight: approx. 2,800 kg Information and data are non-binding, subject to prior sale Special features: The machine is intended for noise and contact pattern tests on bevel and hypoid gears of all gears. By simulating operating conditions, applying different speeds and changing the load states for drive and outlet, the optimal installation distance for standstill can be determined. Digital actual value display for 2 axes Stepless speed adjustment via frequency converter Electrically fused and acceptable ...

Krones Spirit Filling Line Max Speed 18,000 BPH Suitable for 70cl, 75cl and 1 litre bottles Includes; Accummulator - Hartness Dynac - Dynac 6400 - 2004 Cap Feed Elevator - Gassner - Compact Feeder - 2005 Cap Feeder Elevator - Zalkin - Promach 400l - 2020 Cap Feed Elevator - Zalkin - FCT 1911 - 1998 Cartoner - Langenpac - HCC - 2004 Case Erector 1 - Krones - Variocart C-40 - 2004 Case Erector 2 - Krones - Variocart C-40 - 2004 Case Printer 1 - Marsh - Encore - 2007 Case Printer 2 - Marsh - Encore - 2007 Case Sealer - Krones - Variocol H-120 - 2004 Depallitiser - Krones - ABSCH.PRESS.URI1 - 2004 Deshrouder - MSK - MSK 800 - 2004 Divider - SFT Syncro Laner - VWS - 2004 Fill level inspection - Mapex - FLO - 2004 Capper 1 - Zalkin - T9/360 - 2004 Capper 2 - Zalkin - T9/360 - 2004 Capper 3 - Zalkin - T9/360 - 2004 Filler Bloc ...

Extruder: 80 mm Year of manufacture: 1983, completely overhauled in 2002 Control system: Siemens S7 Blow moulding head: 5 litre accumulator head Wall thickness control: 100 points One sprocket on the parallel guide needs to be replaced, otherwise in good condition. The machine has been used for the production of technical parts

Item condition: well maintained, fully functional Availability: immediately Pick-up: via truck with lifting platform

Brewing Kettle /Hot water tank 75HL Vertical cylindrical stainless steel External cladding and insulation finished in riveted stainless steel Mounted on 4 stainless steel legs with adjustable feet Working Capacity 75HL Vessel is fitted with a Lanemark gas burner Vessel is fitted with a wedge wire floor for whole flower hop retention. Previous owner devised a successful method for using pelletized hops utilising an upstand on the central outlet below the wedge wire floor. For more information and more available stock please visit us at - advancedbrewing.co.uk

In the steam chamber pasteurizer, bottles can be pasteurized in crates on pallets with hot steam. The parameters for the temperature rise and the holding time of the set pasteurization temperature can be set as desired. Condition: in working order, well-maintained Nominal capacity (1 l bottles): 480 bottles/h Electr. Power: 4.00 kW Connected loads: 400 V / 16 A / 50 Hz / 5-Ph Steam connection: 3/4 inch Compressed air connection: 6 bar Machine dimensions (WxDxH): 1400 x 2000 x 2700 mm Weight: 700 kg

IDEAL 5221-90 – Professional Pile Cutting Machine Powerful and precise paper stack cutting machine for printers, copy shops and offices. The IDEAL 5221-90 impresses with a cutting width of 520 mm and a cutting height of up to 80 mm, ideal for large paper stacks. The electric backgauge with digital measurement display enables fast and accurate work. Thanks to high-quality Solingen knife steel, clean and precise cuts are guaranteed. The SCS safety system ensures maximum safety during operation. ✔ Cutting width: 520 mm ✔ Cutting height: up to 80 mm ✔ Electric backgauge ✔ Digital measurement display ✔ Robust professional quality Ideal for professional cutting work with high demands on precision and reliability.

Lift system, Kardex, shelf size: 1250x825mm, 7m high, – used - : Price from location: 13.950.-€ (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Bellheimer / Kardex Type: Shuttle 1250x825x10000 Device number: 95.008812/001 Year of Make: 1995 Tray size: 1250x825mm Device height: approx. 7m Depth: approx. 2.70m Width: approx. 1.6m wide. Number of shelves: 44 pieces Permissible total payload: 2x10,000kg Permissible shelf load: 250kg 3x400V, A: 3x5.2, KW 3.6 Condition: used Available: from approx. week 13/2026 Location: Speyer

Compressor with built-in air dryer Power: 25 kW Pressure: 8 bar

Year of manufacture 2004 for 5 - 10 litre containers Clamping force: 100 kN Wall thickness control: 64 points Max. product diameter: 115 mm Cavities: 1 x 3 Center distance: 125 mm Machine is in good condition, and available immediately

Edge banding machine Type: KDF 220 Manufacturer: Brandt Year: 2012 Pre-milling machine Radius Rondomat Radius cidliny Scrapers Machine in good condition, under power Find more here - / Contact us at -

Veneer splicing machine manufactured in 2007. This KUPER FLI model is designed for precision veneer splicing. It operates at a voltage of 400 V and a rated current of 14.5 A. If you are looking to get high-quality veneer processing capabilities, consider the KUPER FLI Veneer splicing machine we have for sale. Contact us for further details.

- Drilling & Tapping in all directions - Can be moved in 7 axes - Fast preparation, accuracy and performence on heavy and bulky parts. - Field using Turbines, Generators, Compressors, Steel Construction, Boilers - Containers, Chemoical equipment, furnces of cement work and shipbuilding

Manufacturer: Koh Young Year of Manufacture: 2022 Machine Type : Pre AOI - Automated Optical Inspection System Koh Young Pre AOI systems use high-resolution optical imaging and advanced inspection algorithms to verify component presence, placement accuracy and solder paste coverage on PCBs prior to reflow. Integrating a Pre AOI station into an SMT line significantly reduces defect rates, rework costs and scrap by catching errors at the earliest possible stage in the assembly process. Find more here - / Contact us at -

Manufacturer: Koh Young Year of Manufacture: 2022 Machine Type : Post AOI - Automated Optical Inspection System Koh Young Post AOI systems use high-resolution 3D optical imaging and intelligent inspection software to verify solder joint quality, component placement and board integrity after reflow soldering. A Post AOI station is an essential quality gate in any high-reliability SMT production line, preventing defective boards from advancing to final assembly, test or customer delivery. Find more here - / Contact us at -

Manufacturer: Kellenberger Model: Kel-Vision URS 125/430 Machine Type : Grinding Machine Condition : Defective Electrical Specifications - Supply voltage: 3 x 400 V - Frequency: 50 Hz - Working voltage: 3 x 400 V - Control voltage: 230 V - Nominal current: 28.5 A - Main fuses: 35 T Find more here - / Contact us at -

Manufacturer: Keyence Model: IM-8000 Type: Image Dimension Measurement System Software Version: B-13.0.0.28-11.07-20.07.09.01 / A2.05-A1.27-A3.03-9B.06-9B.06-02.01-03.02 Sensor: 20-megapixel CMOS Stage Size: 300 x 200 mm Measurement Capacity: Up to 300 features in a single measurement cycle Condition: Used, fully functional Find more here - / Contact us at -

• s/s-style, adjusted for filling and closing of vials/bottles • 2 filling stations for steady objects, object-dia for round objects 16-100 mm, for flat objects 16x16 - 100x100 mm, h 35-310 mm, according to change parts • Output max. 3,000 objects/h according to product • Filling area 0.3-540 ml/bottle according to pumps, with 2 one after the other installed s/s-rotary piston pumps each 2 pumps each 8 - 50 ml • Single filling (max. 50 ml) and step filling (max. 100 ml) possible with existing pumps • Drip retraction • 1 Hand-over station for screw caps dia 22,0 x 20,5 mm with screwing tool and sorting bowl • Change parts for bottle-dia 24,2 x H 63,7 mm, dia 28,6 x H 71,5 mm, dia 37,7 x H 92 mm • 2 sets dosing needles, each 2 pcs, several dia • PLC Klöckner Möller PS4-201-MM1, touchscreen • Eectr. connection 220/380V/50Hz

An old Knopp glass grinding machine for edge processing is available. Grinding belt dimensions X/Y: 1830mm/100mm, glass types: float glass/mirror glass/furniture glass/table tops, grinding wheel diameter: 200mm, table dimensions X/Y: 900mm/1400mm, machine dimensions X/Y/Z: approx. 1300mm/1500mm/1700mm, weight: approx. 500kg. On site inspection is possible.

This Gorman-Rupp S-Line VPA3-70-L is a diesel-powered, dry self-priming centrifugal pump (vacuum pump assisted), with a maximum capacity of 70 m³/h and a delivery head up to 20 mWc. This 3-inch pump is suitable for clean and wastewater, with a maximum solids passage of approximately 29 mm., , Key Specifications, Chassis Dimensions: Fully enclosed, sound-dampened., Fuel Tank: 100 liters, suitable for HVO fuel up to 100%., Engine: Kohler diesel engine, , The pump performs optimally when pumping clean or contaminated water, with a robust steel frame for continuous use., , Throughput capacity: 70 m3/h, Max dirt passage: 29 mm, Motor brand: Kohler, Max. head: 20 MWK, Max dirt passage: 3000 rpm, Weight: 600 kg, , = More information =, , Year of manufacture: 2021, Applicable material: Water, Empty weight: 600 kg, Connector size: 4 Inch, Technical condition: good, Visual appearance: good, Price ...

This Gorman-Rupp S-Line VPA3-70-L is a diesel-powered, dry self-priming centrifugal pump (vacuum pump assisted), with a maximum capacity of 70 m³/h and a delivery head up to 20 mWc. This 3-inch pump is suitable for clean and wastewater, with a maximum solids passage of approximately 29 mm., , Key Specifications, Chassis Dimensions: Fully enclosed, sound-dampened., Fuel Tank: 100 liters, suitable for HVO fuel up to 100%., Engine: Kohler diesel engine, , The pump performs optimally when pumping clean or contaminated water, with a robust steel frame for continuous use., , Throughput capacity: 70 m3/h, Max dirt passage: 29 mm, Motor brand: Kohler, Max. head: 20 MWK, Max dirt passage: 3000 rpm, Weight: 600 kg, , = More information =, , Year of manufacture: 2021, Applicable material: Water, Empty weight: 600 kg, Connector size: 4 Inch, Technical condition: good, Visual appearance: good, Price ...

plate thickness: 4 mm blade length: 220 mm pressure: 0 t weight of the machine ca.: 1,5 t dimensions of the machine ca.: 1,6 x 1,7 x 1,6 m total power requirement: 2,5 kW Combined notching machine with a fixed 90° angle and an adjustable rectangular notching unit variable up to 200mm length x fixed 100mm width. There are 2 manually adjustable stops with a digital display. Axle length X900mm / Y300mm There is no stamp holder / punch / hold-down device for this. These parts can be purchased from Boschert. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m Neu geliefert an Universität. 2018 übernommen. Dann komplett bei BEMA gewartet und an an Einmannbetrieb geliefert. Nun wird die Maschine nochmal gewartet und Tischgeometrie neu hergestellt. 2-Achsen-Digitalanzeige Fagor nachgerüstet. -Reitstock mit Feinverstellung -Inn ...

quantity: 1 STK -> 80018.2322 -> m= 1.5 - 5.0 / EW 18° Various diamond dressing wheels available. Application: Dressing grinding wheels / precision machining Price per piece, discount for multiple purchases The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

quantity: 1 STK -> 80018.2321 -> m= 1.5 - 5 / EW 18° Various diamond dressing wheels from Fässler available. Application: Dressing grinding wheels / precision machining Price per piece, discount for multiple purchases The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 135 mm x travel: 3000 mm y travel: 2000 mm - Z-axis travel: 1600 mm travel -w axis: 700 mm TABLE: table-size: 2000 x 1800 mm table load: 10 t B-axis (table): 0,001 ° MILLING SPINDLE / HEAD: - spindle revolutions (max): 5 - 2000 U/min - spindle diameter: 135 mm - tool fixture: ISO SK 50: BT 50 TOOL MAGAZINE: - number of positions: 40 feed: 1 - 4000 mm/min rapid traverse: 8 m/min control: Fanuc 16i-MB total power requirement: 42 kVA weight of the machine ca.: 37,2 t dimensions of the machine ca.: 6,3 x 6,9 x 4,79 m equipped with: - CNC Control Fanuc 16i-MB - NC-Rotary Table 1800x2000mm - ATC 40-fold (BT 50) - COOLANT THROUGH THE MAIN AXIS - Chip Conveyor - CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2400 mm y-travel: 2000 mm z-travel: 1450 mm table surface area: 5000 x 1400 mm spindle taper: SK 50 Control: Fidia C1 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4 mm roll diameter: 125 mm throat: 200 mm total power requirement: 2,2 kW weight of the machine ca.: 0,48 t dimensions of the machine ca.: 1,6 x 0,6 x 1,2 mm Exhibition machine, unused. • 5 speeds • Foot control • Brake motor • Emergency stop • Hydraulic roller adjustment • Special tool set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width from to: 80-120 mm Working height from to: 30-80 mm : 1200-1600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

measuring range X-axis: 0 - 200 mm measuring range Z-axis: 0 - 300 mm tool adaptor: SK 40 / BT 40 Resolution: 0,01 mm repeating accuracy: 0,01 mm Ambinent temperature: 0 - 40 °C dimensions of the machine ca.: 0,30 x 0,19 x 0,64 m weight: 44 kg Tool Presetter KELCH - set line V123 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Complete Glass Bottling Line for Hot Fill & Cold Fill (Krones / KHS) - Capacity: up to 33,000 bottles/hour (500 ml glass bottles) - YOM: 1999-2007 - many upgrades, see below! The system offers maximum flexibility, allowing hot fill, cold fill, still and carbonated beverages, and multiple bottle sizes. Important: The filler can also be used for PET bottles, offering additional production flexibility. Key Technical Data - Bottle Types - Glass bottles (non-returnable) - PET bottles can also be filled Bottle Sizes - 250 ml – 1000 ml Products - Fruit juices (orange, apple, tomato, etc.) - Hot fill beverages - Cold fill beverages - Carbonated soft drinks (CSD) Capping Types - 28 mm aluminium cap - 33 mm aluminium twist-off cap - 43 mm aluminium twist-off cap - (Twist-off capping machine included) Labelling Options - Paper labels with cold glue - Optional ...

working width: 1250 mm working area:: 6400 m²/Std. tank capacity: Wasser 10l l 0: 80 l total power requirement: kW weight of the machine ca.: 0,45 t dimensions of the machine ca.: 1,6 x 1,2 x 1,3 m Sweeper - with charger - 2 x 400mm side brushes - incl. water tank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Complete PET Filling Line – Krones AG ERGOBLOC – 1.5 L – 32,000 BPH – Non-Carbonated Products – YOM 2006 For sale is a complete PET bottling and packaging line for still water and non-carbonated beverages, built around a Krones ERGOBLOC system. The line has a capacity of up to 32,000 bottles per hour (BPH) for 1.5 liter PET bottles with 28 mm or 32 mm caps. The equipment is suitable for still water and other non-carbonated beverages only. The line includes the full process from preform feeding, blowing, filling and capping to labeling, packing and palletizing, making it a complete turnkey solution for PET bottle production and packaging. General Information Manufacturer: Krones AG System: ERGOBLOC PET filling line Bottle Size: 1.5 L PET Capacity: approx. 32,000 bottles/hour Cap Size: 28 / 32 mm Products: Non-carbonated beverages (still water) Year of Manufactur ...

The following components make up the full WM-3000 series kit:PositionModel/ArticleDescriptionOrigin1WM-3000Coordinate Measuring System (Main Head) Japan 2WM-S1Camera Stand (Kamerastativ) —3—Laptop with Measuring Software —4WM-8C1Battery Charger (Akkuladegerät) China 5WM-B1Battery (Messstab Akku) China 6—Training Fee for WM series —7WM-V30DService Package —8OP-88032Mouse, German User Manual, and WM accessories Find more here - / Contact us at -

Manufacturer: Kunzmann Model: WF650 Machine Type: Universal Milling Machine Year of Manufacture: 2013 CNC Control: Heidenhain iTNC 530 X / Y / Z Travel: 650 x 500 x 450 mm Table Size: 1100 x 600 mm Spindle Speed: 1 to 6,500 RPM (steplessly variable) Spindle Power: 9.0 kW at 100% ED / 13.0 kW at 40% ED Tool Changer: 20-position automatic Tool Measurement: Heidenhain TT 449 automatic tool measurement 3D Touch Probe: Heidenhain infrared 3D probe for workpiece measurement Feed Rate: X/Y 25 m/min, Z 20 m/min Power Supply: 400 V / 50 Hz Machine Weight: approx. 5,700 kg Condition: Excellent - top maintained Find more here - / Contact us at -

Load capacity: 80kg, horizontal/vertical reach: 2100mm/3300mm, repeatability: +/-0.07mm, weight: approx. 540kg. Documentation available. An on-site inspection is possible.

serial number: 108392 Electric capacity: 7,7 Watt working width: 2050 mm : 4 mm weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4.700 mm y-travel: 1.250 mm z-travel: 1.500 mm control: HEIDENHAIN iTNC 530 clamping table: - surface area: 5.000 x 1.000 mm max. workpiece weight: 10.000 kg T-slot number x size: 7 x 22 Abstand 140 mm Universal Milling Head: _ Swiveling area front/back level: automatisch Indexing: 0,001 x 0,001° stepless Constant Power at 100 % ED: 37 kW Speed range, stepless: 35 - 4.500 min-1 max. torque: 880 Nm tool taper: SK 50 – DIN 69871 internal coolant system feed: durch das Spindelzentrum automatic tool changer ATC: - Tool places: 60 Plätze diameter of tools max.: 125/240 mm workpiece length: 300 mm weight of tools max.: 25 kg feeds: - X-, Y- and Z-axis, stepless: 6 - 15.000 mm/min rapid in X/Y/Z: 25.000 m/min max. feed force X-Y-Z-axis: 10.000 N total power requirement: kW weight of the machine ca.: 35 t dimensions of the machine ca.: 12,7 x 5,6 x 4,2 m Equipment / Accessories:Hea ...

material width: 0400 mm coil weight: 1,50 t material thickness: mm nomb. of straightening rolls: 9 diam. of the rolls ca.: 30 mm range of expansion ca.: 460 - 530 mm coil outside - diam. ca.: 1500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A CNC spindle machine Klaaßen is available. Main motor power: 12kW, tool interface: HSK-63, speed: 6000rpm, max. machining dimensions X/Y/Z: 1800mm/1800mm/445mm, feed rate: 15m/min, indexing angle: 4x90°, control: Siemens Sinumerik 840D. Documentation available. An on-site inspection is possible.

A CNC cylindrical grinding machine Karstens including a coolant system Knoll VRF 150/620 (1997) and an emulsion separator KGH KFM-1200 (2000) is available. Grinding length: 650mm, center height: 190mm, max. grinding diameter: 3800mm, max. workpiece weight between centers/flying: 250kg/100kg, table swivel: +/-12.5°, table feed: 4m/min, machine dimensions X/Y/Z: approx. 3250mm/2150mm/1800mm, weight: approx. 3500kg, control: CNC 20. An inspection on site is possible.

An alkaline based single chamber cleaning system wash system is available. Containers: 3, total tank volume: 12.9m³, working dimensions X/Y/Z: approx. 8000mm/1200mm/1600mm, overall system dimensions X/Y/Z: approx. 19500mm/7200mm/4300mm. Documentation available. An on site inspection is possible.

power capacity: 1,5 kW volt: 380 V ampere: 3,7 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hoist for 2 tons. Motor 1.8 kW, 3 phases. Made in Japan.

Edgebander manufactured in 2006. This HOMAG Optimat KAL 330 features a flexible production layout for furniture parts, accommodating workpiece dimensions from 250 to 3000 mm in length and 120 to 1200 mm in width. It includes a single-sided edge banding machine capable of processing various edge materials up to 20 mm thickness. If you are looking to get high-quality edge processing capabilities, consider the HOMAG Optimat KAL 330 edgebander we have for sale. Contact us for further details.